Picosecond optical vortex pulse illumination forms a monocrystalline silicon needle

Precision isolation and cultivation of single cells by vortex and flat-top laser ejection

Single-cell isolation stands as a critical step in single-cell studies, and single-cell ejection technology based on laser induced forward transfer technology (LIFT) is considered one of the most promising methods in this regard for its ability of visible isolating single cell from complex samples. In this study, we improve the LIFT technology and introduce optical vortex laser-induced forward transfer (OV-LIFT) and flat-top laser-induced forward transfer (FT-LIFT) by utilizing spatial light modulator (SLM), aiming to enhance the precision of single-cell sorting and the cell's viability after ejection. Experimental results demonstrate that applying vortex and flat-top beams during the sorting and collection process enables precise retrieval of single cells within diameter ranges of 50 μm and 100 μm, respectively. The recovery rates of Saccharomyces cerevisiae and Escherichia coli DH5α single cell ejected by vortex beam are 89 and 78%, by flat-top beam are 85 and 57%. When employing Gaussian beam sorting, the receiving range extends to 400 μm, with cultivation success rates of S. cerevisiae and E. coli DH5α single cell are 48 and 19%, respectively. This marks the first application of different mode beams in the ejection and cultivation of single cells, providing a novel and effective approach for the precise isolation and improving the viability of single cells.

Propagation of integral and fractional perfect vortex beams in a gradient-index medium

The analytical expressions for the complex amplitude of integral and fractional perfect vortex (PV) beams propagating in a gradient-index (GRIN) medium are derived. The intensity and phase distributions, propagation trajectories, Poynting vectors, and the effects of topological charge and refractive index at the medium axis on the intensity of both beams in the medium are numerically investigated. It is shown that both beams propagate periodically in the GRIN medium with alternating spot focusing and reconstruction. Unlike the integral PV beam, the fractional PV beam has a dark line in intensity profiles and a line edge dislocation in phase distributions along the positive x-axis. These properties persist during the beam propagation in the GRIN medium. Moreover, the topological charge and the refractive index at the medium axis have little effect on the intensity of the PV beam propagating in the GRIN medium. The results presented in this paper may be useful for the application of integral and fractional PV beams in optical guiding and optical communications.

1.7 µm sub-200 fs vortex beams generation from a thulium-doped all-fiber laser

The pulsed 1.7 µm vortex beams (VBs) has significant research prospects in the fields of imaging and material processing. We experimentally demonstrate the generation of sub-200 fs pulsed VBs at 1.7 µm based on a home-made mode-selective coupler (MSC). Through dispersion management technology in a thulium-doped fiber laser, the stable linearly polarized VBs pulse directly emitting from the cavity is measured to be 186 fs with central wavelength of 1721.2 nm. By controlling the linear superposition of LP11 modes, cylindrical vector beams (CVBs) can also be obtained. In addition, a variety of bound states pulsed VBs at 1.7 µm can also be observed. Our finding provides an effective way to generate ultrashort pulsed VBs and CVBs at 1.7 µm waveband.

Optical vortex induced spatio-temporally modulated superconductivity in a high-Tc cuprate

We report an experimental approach to produce spatially localized photoinduced superconducting state in a cuprate superconductor using optical vortices with ultrafast pulses. The measurements were carried out using coaxially aligned three-pulse time-resolved spectroscopy, in which an intense vortex pulse was used for coherent quenching of superconductivity and the resulting spatially modulated metastable states were analyzed by the pump-probe spectroscopy. The transient response after quenching shows a spatially localized superconducting state that remains unquenched at the dark core of the vortex beam for a few picoseconds. Because the quenching is instantaneously driven by photoexcited quasiparticles, the vortex beam profile can be transferred directly to the electron system. By using the optical vortex-induced superconductor, we demonstrate spatially resolved imaging of the superconducting response and show that the spatial resolution can be improved using the same principle as that of super-resolution microscopy for fluorescent molecules. The demonstration of spatially controlled photoinduced superconductivity is significant for establishing a new method for exploring novel photoinduced phenomena and applications in ultrafast optical devices.

Multi-Spiral Laser Patterning of Azopolymer Thin Films for Generation of Orbital Angular Momentum Light

Recently, the realization of the spiral mass transfer of matter has attracted the attention of many researchers. Nano- and microstructures fabricated with such mass transfer can be used for the generation of light with non-zero orbital angular momentum (OAM) or the sensing of chiral molecules. In the case of metals and semiconductors, the chirality of formed spiral-shaped microstructures depends on the topological charge (TC) of the illuminating optical vortex (OV) beam. The situation is quite different with polarization-sensitive materials such as azopolymers, azobenzene-containing polymers. Azopolymers show polarization-sensitive mass transfer both at the meso and macro levels and have huge potential in diffractive optics and photonics. Previously, only one-spiral patterns formed in thin azopolymer films using circularly polarized OV beams and double-spiral patterns formed using linearly polarized OV beams have been demonstrated. In these cases, the TC of the used OV beams did not affect the number of formed spirals. In this study, we propose to use two-beam (an OV and a Gaussian beam with a spherical wavefront) interference lithography for realization spiral mass transfer with the desired number of formed spirals. The TC of the OV beam allows for controlling the number of formed spirals. We show the microstructures fabricated by the laser processing of thin azopolymer films can be used for the generation of OAM light at the microscale with the desired TC. The experimentally obtained results are in good agreement with the numerically obtained results and demonstrate the potential of the use of such techniques for the laser material processing of polarization-sensitive materials.

Polarization-sensitive direct laser patterning of azopolymer thin films with vortex beams

Laser patterning of thin films of materials is widely used for the fabrication of one-, two- and three-dimensional functional nanomaterials. Using structured laser beams with a complex structure of amplitude, phase, and polarization distributions allows one to significantly simplify and speed up the procedure of manufacturing nano- and microstructures with a complex shape, such as a spiral structure. Here, we demonstrate the use of vortex laser beams with a helical wavefront for the realization of spiral mass transfer in azopolymer films. The polarization sensitivity of this material allows us to demonstrate the formation of different three-dimensional structures in the case of linearly or circularly polarized vortex beams of different orders. The presented theoretical analysis shows that the profile of the fabricated structures is defined by the structure of the longitudinal component of the incident radiation, and thus can be easily controlled with the polarization state of the radiation without the need to change the amplitude-phase structure of the beam.

Nanoneedle formation via doughnut beam-induced Marangoni effects

Recently, nanosecond pulsed optical vortices enables the production of a unique chiral and sharp needle-like nanostructure (nano-needle). However, the formation process of these structures has been unsolved although mass transport by angular momentum would contribute to the chirality. Here, we reveal that another key factor in the formation of a sharp nano-needle is the Marangoni effect during the melting condition at high temperature. Remarkably, the thickness and height of the nano-needle can be precisely controlled within 200 nm, corresponding to 1/25 of beam radius (5 µm) beyond the diffraction limit by ring-shaped inhomogeneous temperature rise. Our finding will facilitate the development of advanced nano-processing with a variety of structured light beams.

High energy switchable pulsed High-order Mode beams in a mode-locking Raman all-fiber laser with high efficiency

High energy pulsed High-order Mode (HOM) beams has great potential in materials processing and particle acceleration. We experimentally demonstrate a high energy mode-locking Raman all-fiber laser with switchable HOM state. A home-made fiber mode-selective coupler (MSC) is used as the mode converter with a wide bandwidth of 60 nm. By combining advantages of MSC and stimulated Raman scattering, 1.1 μJ pulsed HOM beams directly emitting from the all-fiber cavity can be achieved. After controlling the category and phase delay of vector modal superposition, different pulsed HOM beams including cylindrical vector beams (CVBs) (radial and angular) and optical vortex beams (OVBs) are reasonably obtained with high purity (all over 95%), as well as arbitrary switching. Furtherly, the slope efficiency of HOM beams in the mode-locking and continuous wave operations are as much as 20.3% and 31.8%, respectively. It may provide an effective way to achieve high energy pulsed HOM beams.

Single-shot generation of composite optical vortex beams using hybrid binary fork gratings

We design and experimentally demonstrate a simple, single-shot method for the generation of arbitrary composite vortex (CV) beams using hybrid binary fork gratings (hBFG). These gratings were computationally generated by removing the central region around the fork-dislocation of azimuthal charge ℓ₁ and substituting it with a BFG of a different charge ℓ₂. The geometrical parameters of hBFGs were optimized for the efficient generation of CV beams. The method was further extended to the generation of CV beams consisting of three different ℓ and of higher radial charges p. This simple generation method may be useful to generate complex beam shapes with engineered phase fronts without complicated interferometry based techniques.

Recent progress in all-fiber ultrafast high-order mode lasers

Ultrafast high-order mode (HOM) lasers are a relatively new class of ultrafast optics. They play a significant role in the fieldsof scientific research and industrial applications due to the high peak power and unique properties of spatial intensity and polarization distribution. Generation of ultrafast HOM beams in all-fiber systems has become an important research direction. In this paper, all-fiber mode conversion techniques, pulsed HOM laser strategies, and few-mode/multi-mode fiber (FMF/MMF) lasers are reviewed. The main motivation of this review is to highlight recent advances in the field of all-fiber ultrafast HOM lasers, for example, generating different HOM pulses based on fiber mode converters and mode-locking in the FMF/MMF lasers. These results suggest that mode selective coupler can be used as a broad bandwidth mode converter with fast response and HOM can be directly oscillated in the FMF/MMF laser cavity with high stability. In addition, spatiotemporal mode-locking in the FMF/MMF is also involved. It is believed that the development of all-fiber ultrafast HOM lasers will continue to deepen, thus laying a good foundation for future applications.

Ultraviolet intracavity frequency-doubled Pr3+:LiYF4 orbital Poincaré laser

Here we demonstrate intracavity frequency-doubling of an ultra-compact (cavity length < 20 mm) Pr³⁺:LiYF₄ (YLF) orbital Poincaré laser, in which the fundamental modes are represented on an equivalent orbital Poincaré sphere (eOPS) and a singularities hybrid evolution nature sphere (SHENS). The generated ultraviolet (UV, 320 nm) output carries orbital angular momentum (OAM), and it typically exhibits an optical bottle beam with a 3-dimensional dark core, formed of a coherent superposition of eigen Laguerre-Gaussian (LG) modes. Such ultraviolet structured light beams with OAM offer many advanced applications from microscopy to materials processing.

Silicon twisted cone structure produced by optical vortex pulse with structure evaluation by radiation hydrodynamic simulation

We demonstrate a radiation hydrodynamic simulation of optical vortex pulse-ablated microcone structures on silicon (Si) substrates. Doughnut-shaped craters were formed by single pulse irradiation on the Si substrate, and a twisted cone structure with a height of 3.5 µm was created at the center of the irradiation spot by the circularly polarized optical vortex pulse. A two-dimensional (2-D) radiation hydrodynamic simulation reproduced the cone structure well with a height of 3 µm. The central part of the incident laser power was lowered from the initial profile due to plasma shielding over the laser pulse duration for an inverted double-well laser profile. The acute tip shape of the silicon surface can survive over the laser irradiation period.

X-ray microscope for imaging topological charge and orbital angular momentum distribution formed by chirality

The distribution of topological charges on X-ray vortices was measured by differential Fourier space filtering microscope, differential radial Hilbert transform microscope. It was experimentally verified for the first time using a Spiral Fresnel zone plate objective lens. This X-ray microscope is highly sensitive to X-ray topological defects, such as edges and vortices, at the exit-face wave field of objects. Its efficient use is also discussed.

Spatially controlled nano-structuring of silicon with femtosecond vortex pulses

Engineering material properties is key for development of smart materials and next generation nanodevices. This requires nanoscale spatial precision and control to fabricate structures/defects. Lithographic techniques are widely used for nanostructuring in which a geometric pattern on a mask is transferred to a resist by photons or charged particles and subsequently engraved on the substrate. However, direct mask-less fabrication has only been possible with electron and ion beams. That is because light has an inherent disadvantage; the diffraction limit makes it difficult to interact with matter on dimensions smaller than the wavelength of light. Here we demonstrate spatially controlled formation of nanocones on a silicon surface with a positional precision of 50 nm using femtosecond laser ablation comprising a superposition of optical vector vortex and Gaussian beams. Such control and precision opens new opportunities for nano-printing of materials using techniques such as laser-induced forward transfer and in general broadens the scope of laser processing of materials.

Theoretical analysis on spatially structured beam induced mass transport in azo-polymer films

The radiation force from paraxial beams possessing helical phase fronts causes twists on the surface of an azobenzene polymer sample, and leads to the formation of micro-scale structures. Here, we theoretically investigate the radiation force generated by spatially structured optical beams on a dispersive-absorptive substrate. We derive an analytical expression for the radiation force from spatially structured polarized beams, including, lemon, star, monstar and vector vortex beams in the paraxial regime. Finally, we extend our calculation for non-paraxial beams - optical beams under the tight-focusing regime - and simulate the transverse radiation forces numerically at the focal plane.

Silicon microprotrusions with tailored chirality enabled by direct femtosecond laser ablation

Here, we report on formation of nanoprotrusions on the surface of a bulk crystalline silicon wafer under femtosecond-laser ablation with a donut-shaped laser beam. By breaking circular symmetry of the irradiating donut-shaped fs-pulse beam, a switch in geometry of the formed surface nanoprotrusions from regular to chiral was demonstrated. The chirality of the obtained Si nanostructures was promoted with an asymmetry degree of the laser beam. An uneven helical flow of laser-melted Si caused by asymmetry of the initial intensity and temperature pattern on the laser-irradiated Si surface explains this phenomenon. Chirality of the formed protrusions was confirmed by visualizing cross-sectional cuts produced by focused ion beam milling as well as Raman activity of these structures probed by circularly polarized light with opposite handedness. Our results open a pathway towards easy-to-implement inexpensive fabrication of chiral all-dielectric nanostructures for advanced nanophotonic applications and sensing of chiral molecules.

Effect of hydrodynamic inter-particle interaction on the orbital motion of dielectric nanoparticles driven by an optical vortex

We experimentally and theoretically characterize dielectric nano- and microparticle orbital motion induced by an optical vortex of the Laguerre-Gaussian beam. The key to stable orbiting of dielectric nanoparticles is hydrodynamic inter-particle interaction and microscale confinement of slit-like fluidic channels. As the number of particles in the orbit increases, the hydrodynamic inter-particle interaction accelerates orbital motion to overcome the inherent thermal fluctuation. The microscale confinement in the beam propagation direction helps to increase the number of trapped particles by reducing their probability of escape from the optical trap. The diameter of the orbit increases as the azimuthal mode of the optical vortex increases, but the orbital speed is shown to be insensitive to the azimuthal mode, provided that the number density of the particles in the orbit is same. We use experiments, simulation, and theory to quantify and compare the contributions of thermal fluctuation such as diffusion coefficients, optical forces, and hydrodynamic inter-particle interaction, and show that the hydrodynamic effect is significant for circumferential motion. The optical vortex beam with hydrodynamic inter-particle interaction and microscale confinement will contribute to biosciences and nanotechnology by aiding in developing new methods of manipulating dielectric and nanoscale biological samples in optical trapping communities.

Circular ripple patterns on silicon induced by bubble-diffracted femtosecond laser pulses in liquid

We report on a new technique of silicon surface nanostructuring in liquid with a pair of Gaussian-shaped femtosecond laser pulses. The bubble, generated in liquid near the molten silicon surface by the first pulse, serves as a dynamic microscale obstacle for spatial modulation of the intensity profile of the second pulse following at a certain delay via scattering processes. As a result, the circular ripple patterns with anomalously high surface-relief modulation, undersurface annular nanocavities, and interfacial smoothness are produced at the surface. The possibility of the control over the specific pattern through the laser intensity variation is shown.

Optical vortex-induced forward mass transfer: manifestation of helical trajectory of optical vortex

The orbital angular momentum of an optical vortex field is found to twist high viscosity donor material to form a micron-scale 'spin jet'. This unique phenomenon manifests the helical trajectory of the optical vortex. Going beyond both the conventional ink jet and laser induced forward mass transfer (LIFT) patterning technologies, it also offers the formation and ejection of a micron-scale 'spin jet' of the donor material even with an ultrahigh viscosity of 4 Pa·s. This optical vortex laser induced forward mass transfer (OV-LIFT) patterning technique will enable the development of next generation printed photonic/electric/spintronic circuits formed of ultrahigh viscosity donor dots containing functional nanoparticles, such as quantum dots, metallic particles and magnetic ferrite particles, with ultrahigh spatial resolution. It can also potentially explore a completely new needleless drug injection.

Generation of coupled orbital angular momentum modes from an optical vortex parametric laser source

We report on the generation of flower (wheel) modes, which manifest coupled orbital angular momentum (OAM) modes, from a vortex pumped optical parametric oscillator simply by employing a pump source with a short temporal coherence time. This vortex oscillator was also developed to generate a further higher-order vortex signal output with ℓs=2-4 by replacement of the pump source with a longer coherence time. The signal and idler outputs were tuned within wavelength ranges of 745-955 nm and 1200-1855 nm, respectively. The maximum signal output energy of 1.2 mJ was measured with an optical efficiency of 15.6%.

Generation of high-quality terahertz OAM mode based on soft-aperture difference frequency generation

We demonstrate the generation of high-quality tunable terahertz (THz) vortices in an eigenmode by employing soft-aperture difference frequency generation of vortex and Gaussian modes. The generated THz vortex output exhibits a high-quality orbital angular momentum (OAM) mode with a topological charge of ℓ_THz = ±1 in a frequency range of 2-6 THz. The maximum average power of the THz vortex output obtained was ∼3.3 µW at 4 THz.

Direct generation of red and orange optical vortex beams from an off-axis diode-pumped Pr3+:YLF laser

We demonstrate the direct generation of visible vortex beams at 640 nm and 607 nm by employing an off-axis pumping scheme in a diode end-pumped Pr³⁺:YLF laser. A detailed numerical analysis, based on the coherent superposition of Hermite-Gaussian modes with different amplitudes and phases, is perfectly consistent with the experimentally observed lasing modes. The maximum vortex output powers have been measured to be 808 mW and 211 mW at a pump power of 3.16 W, for the wavelengths of 640 nm and 607 nm, respectively. We also demonstrate the handedness control of the generated vortex beam. Such a visible vortex laser can potentially be applied in super-resolution fluorescent microscopes and micro-fabrication research.

Optical vortices 30 years on: OAM manipulation from topological charge to multiple singularities

Thirty years ago, Coullet et al. proposed that a special optical field exists in laser cavities bearing some analogy with the superfluid vortex. Since then, optical vortices have been widely studied, inspired by the hydrodynamics sharing similar mathematics. Akin to a fluid vortex with a central flow singularity, an optical vortex beam has a phase singularity with a certain topological charge, giving rise to a hollow intensity distribution. Such a beam with helical phase fronts and orbital angular momentum reveals a subtle connection between macroscopic physical optics and microscopic quantum optics. These amazing properties provide a new understanding of a wide range of optical and physical phenomena, including twisting photons, spin-orbital interactions, Bose-Einstein condensates, etc., while the associated technologies for manipulating optical vortices have become increasingly tunable and flexible. Hitherto, owing to these salient properties and optical manipulation technologies, tunable vortex beams have engendered tremendous advanced applications such as optical tweezers, high-order quantum entanglement, and nonlinear optics. This article reviews the recent progress in tunable vortex technologies along with their advanced applications.

Tunable near-infrared optical vortex parametric laser with versatile orbital angular momentum states

We demonstrate a tunable vortex laser with versatile orbital angular momentum (OAM) states based on a singly resonant optical parametric oscillator formed of a noncritical phase-matching LiB₃O₅ crystal. The selective generation of a signal (idler) output with three OAMs, including an upconverted (negative) OAM, is achieved simply by appropriate shortening (or extending) of the cavity. The compact cavity configuration also allows for the generation of the signal (idler) output with various OAMs by simply tuning the signal wavelength. The vortex output is tuned within the wavelength region of 0.74 to 1.84 μm with a maximum pulse energy of 2.16 mJ from a pump energy of 9.3 mJ.

Advanced laser scanning for highly-efficient ablation and ultrafast surface structuring: experiment and model

Ultra-short laser pulses are frequently used for material removal (ablation) in science, technology and medicine. However, the laser energy is often used inefficiently, thus, leading to low ablation rates. For the efficient ablation of a rectangular shaped cavity, the numerous process parameters such as scanning speed, distance between scanned lines, and spot size on the sample, have to be optimized. Therefore, finding the optimal set of process parameters is always a time-demanding and challenging task. Clear theoretical understanding of the influence of the process parameters on the material removal rate can improve the efficiency of laser energy utilization and enhance the ablation rate. In this work, a new model of rectangular cavity ablation is introduced. The model takes into account the decrease in ablation threshold, as well as saturation of the ablation depth with increasing number of pulses per spot. Scanning electron microscopy and the stylus profilometry were employed to characterize the ablated depth and evaluate the material removal rate. The numerical modelling showed a good agreement with the experimental results. High speed mimicking of bio-inspired functional surfaces by laser irradiation has been demonstrated.

Nanoscale chiral surface relief of azo-polymers with nearfield OAM light

An optical vortex with orbital angular momentum (OAM) can be used to induce microscale chiral structures in various materials. Such chiral structures enable the generation of a nearfield vortex, i.e. nearfield OAM light on a sub-wavelength scale, thereby leading to further nanoscale mass-transport. We report on the formation of a nanoscale chiral surface relief in azo-polymers due to nearfield OAM light. The resulting nanoscale chiral relief exhibits a diameter of ca. 400 nm, which corresponds to less than 1/5-1/6th of the original chiral structure (ca. 2.1 µm). Such a nanoscale chiral surface relief is established by the simple irradiation of uniform visible plane-wave light with an intensity of <500 mW/cm².

Nanoscale thermal diffusion during the laser interference ablation using femto-, pico-, and nanosecond pulses in silicon

Laser interference ablation in silicon using femto-, pico-, and nanosecond pulses was investigated. The experimental and computational results provide information about nanoscale thermal diffusion during the ultra-short laser-matter interaction. The temperature modulation depth was introduced as a parameter for quality assessment of laser interference ablation. Based on the experiments and calculations, a new semi-empirical formula which combines the interference period with the laser pulse duration, the thermal modulation depth and the thermal diffusivity of the material was derived. This equation is in excellent agreement with the experimental and modelling results of laser interference ablation. This new formula can be used for selecting the appropriate pulse duration for periodical structuring with the required resolution and quality.

Temporally shaped Laguerre-Gaussian femtosecond laser beams

Femtosecond vortex beams with adjustable temporal pulse shapes are generated. These shaped laser pulses are characterized in the spectral domain by determination of the spectral amplitude and phase as well as in the spatial domain by expansion of the beam profile in a superposition of Laguerre-Gaussian transversal laser modes. The experiments demonstrate that the temporal pulse shapes impressed with a pulse shaper based on a programmable liquid-crystal spatial light modulator are basically unaltered by subsequent transmission through a spiral phase plate, while a high-quality optical vortex is imposed. The combination of programmable pulse shapes and optical vortices in femtosecond laser beams opens new possibilities for applications in micromachining, high harmonic generation, and microscopy.

Zero-orbital-angular-momentum laser printing of chiral nanoneedles

Laser irradiation of various materials including metals, polymers, and semiconductors with vortex beams was previously shown to "twist" transiently molten matter providing the direct easy-to-implement way to obtain chiral surface relief. Specifically for metals, this effect was attributed to transfer of an orbital angular momentum (OAM) carried by a vortex beam. In this Letter, we report the formation of twisted metallic nanoneedles on surfaces of silver and gold films under their irradiation by a zero-OAM laser beam with a spiral-shaped intensity distribution. Our comparative experiments clearly demonstrate, for the first time to the best of our knowledge, that the formation of the chiral nanoneedles on the noble-metal films is mainly governed by the temperature-gradient-induced chiral thermocapillary mass transfer, rather than by OAM-driven rotation of the molten matter.

Generation of photonic vortex lattices with colloidal monolayers of dielectric microparticles

It is shown that colloidal monolayers of dielectric microparticles with high refractive index (e.g., titania, zirconia) can convert incident, circularly polarized laser light into the lattice of photonic vortices that carry orbital angular momentum. Such particle monolayers are formed via self-assembly on various surfaces. Properties of the vortices are studied analytically, taking into account the symmetry of the problem. Vortex lattices of topological charges m=+-1 and two different polarizations are shown to be possible. Generation of the vortex lattices by the spherical and spheroidal particles irradiated by femtosecond laser pulses is studied using the finite difference time domain simulation. The vortex generation efficiency depending on the particle parameters is analyzed.

Azo-polymer film twisted to form a helical surface relief by illumination with a circularly polarized Gaussian beam

A helical surface relief can be created in an azo-polymer film simply by illuminating circularly polarized light with spin angular momentum and without any orbital angular momentum. The helicity of the surface relief is determined by the sign of the spin angular momentum. The illumination of circularly polarized light induces orbital motion of the azo-polymer to shape the helical surface relief as an intermediate form; a subsequent transformation to a non-helical bump-shaped relief with a central peak creates a final form with additional exposure time. The mechanism for the formation of such a helical surface relief was also theoretically analyzed using the formula for the optical radiation force in a homogeneous and isotropic material.

Ultrashort vortex from a Gaussian pulse - An achromatic-interferometric approach

The more than a century old Sagnac interferometer is put to first of its kind use to generate an achromatic single-charge vortex equivalent to a Laguerre-Gaussian beam possessing orbital angular momentum (OAM). The interference of counter-propagating polychromatic Gaussian beams of beam waist ω_λ with correlated linear phase (ϕ₀ ≥ 0.025 λ) and lateral shear (y₀ ≥ 0.05 ω_λ) in orthogonal directions is shown to create a vortex phase distribution around the null interference. Using a wavelength-tunable continuous-wave laser the entire range of visible wavelengths is shown to satisfy the condition for vortex generation to achieve a highly stable white-light vortex with excellent propagation integrity. The application capablitiy of the proposed scheme is demonstrated by generating ultrashort optical vortex pulses, its nonlinear frequency conversion and transforming them to vector pulses. We believe that our scheme for generating robust achromatic vortex (implemented with only mirrors and a beam-splitter) pulses in the femtosecond regime, with no conceivable spectral-temporal range and peak-power limitations, can have significant advantages for a variety of applications.

Direct laser printing of chiral plasmonic nanojets by vortex beams

Donut-shaped laser radiation, carrying orbital angular momentum, namely optical vortex, was recently shown to provide vectorial mass transfer, twisting transiently molten material and producing chiral micro-scale structures on surfaces of different bulk materials upon their resolidification. In this paper, we show that at high-NA focusing nanosecond laser vortices can produce chiral nanoneedles (nanojets) of variable size on thin films of such plasmonic materials, as silver and gold films, covering thermally insulating substrates. Main geometric parameters of the produced chiral nanojets, such as height and aspect ratio, were shown to be tunable in a wide range by varying metal film thickness, supporting substrates, and the optical size of the vortex beam. Donut-shaped vortex nanosecond laser pulses, carrying two vortices with opposite handedness, were demonstrated to produce two chiral nanojets twisted in opposite directions. These results suggest optical interference of the incident and reflected laser beams as a source of complex surface intensity distributions in metal films, possessing spiral components and driving both center-symmetric and spiral thermocapillary melt flows to yield in frozen nanoneedles with their pre-determined spiral nanocarving.

Octave-band tunable optical vortex parametric oscillator

We developed an octave-band tunable optical vortex laser based on a 532 nm optical vortex pumped optical parametric oscillator with a simple linear-cavity configuration by employing cascaded non-critical phase-matching LiB₃O₅ crystals. The optical vortex output was tunable from 735 to 1903 nm. For a pump energy of 9 mJ, an optical vortex pulse energy of 0.24-2.36 mJ was obtained, corresponding to an optical-optical efficiency of 0.3-26%.