Multifrequency Force Microscopy of Helical Protein Assembly on a Virus

Structural Insights into Plant Viruses Revealed by Small-Angle X-ray Scattering and Atomic Force Microscopy

The structural study of plant viruses is of great importance to reduce the damage caused by these agricultural pathogens and to support their biotechnological applications. Nowadays, X-ray crystallography, NMR spectroscopy and cryo-electron microscopy are well accepted methods to obtain the 3D protein structure with the best resolution. However, for large and complex supramolecular structures such as plant viruses, especially flexible filamentous ones, there are a number of technical limitations to resolving their native structure in solution. In addition, they do not allow us to obtain structural information about dynamics and interactions with physiological partners. For these purposes, small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM) are well established. In this review, we have outlined the main principles of these two methods and demonstrated their advantages for structural studies of plant viruses of different shapes with relatively high spatial resolution. In addition, we have demonstrated the ability of AFM to obtain information on the mechanical properties of the virus particles that are inaccessible to other experimental techniques. We believe that these under-appreciated approaches, especially when used in combination, are valuable tools for studying a wide variety of helical plant viruses, many of which cannot be resolved by classical structural methods.

Caught in Action: Visualizing Dynamic Nanostructures Within Supramolecular Systems Chemistry

Supramolecular systems chemistry has been an area of active research to develop nanomaterials with life-like functions. Progress in systems chemistry relies on our ability to probe the nanostructure formation in solution. Often visualizing the dynamics of nanostructures which transform over time is a formidable challenge. This necessitates a paradigm shift from dry sample imaging towards solution-based techniques. We review the application of state-of-the-art techniques for real-time, in situ visualization of dynamic self-assembly processes. We present how solution-based techniques namely optical super-resolution microscopy, solution-state atomic force microscopy, liquid-phase transmission electron microscopy, molecular dynamics simulations and other emerging techniques are revolutionizing our understanding of active and adaptive nanomaterials with life-like functions. This Review provides the visualization toolbox and futuristic vision to tap the potential of dynamic nanomaterials.

Enhancing higher-order eigenmodes of AFM using bridge/cantilever coupled system

The wide application of multi-frequency atomic force microscopy (AFM) places higher demands on the higher-order modes response of the cantilever. The response of the higher modes however is generally weaker than that of the fundamental mode in air. Researchers have proposed many methods, most of which involve cantilever modification, to enhance higher-order eigenmodes response. These previous results are proved to be effective, but the microfabrication is expensive. In this article, we propose a novel model based on bridge/cantilever coupled system to enhance the higher-order modes response of AFM cantilever. The segmented beam model provides a new thinking to explain the appearance of undesired peaks in mode analysis of cantilever. Through theoretical analysis and simulation, we find that higher resonance modes are enhanced by tuning the bridge to match the high resonances of the single clamped cantilever. The length, thickness of the coupled system and the location of excitation can affect the enhancement. In summary, this model provides a new way to improve higher mode response for multi-frequency and other high bandwidth applications of AFM.

Nanoscale Wetting of Single Viruses

The epidemic spread of many viral infections is mediated by the environmental conditions and influenced by the ambient humidity. Single virus particles have been mainly visualized by atomic force microscopy (AFM) in liquid conditions, where the effect of the relative humidity on virus topography and surface cannot be systematically assessed. In this work, we employed multi-frequency AFM, simultaneously with standard topography imaging, to study the nanoscale wetting of individual Tobacco Mosaic virions (TMV) from ambient relative humidity to water condensation (RH > 100%). We recorded amplitude and phase vs. distance curves (APD curves) on top of single virions at various RH and converted them into force vs. distance curves. The high sensitivity of multifrequency AFM to visualize condensed water and sub-micrometer droplets, filling gaps between individual TMV particles at RH > 100%, is demonstrated. Dynamic force spectroscopy allows detecting a thin water layer of thickness ~1 nm, adsorbed on the outer surface of single TMV particles at RH < 60%.

Charge Calibration Standard for Atomic Force Microscope Tips in Liquids

An electric charge standard with nanoscale resolution is created using the known charge distribution of a single tobacco mosaic virus coat protein combined with the known packing of these proteins in the virus capsid. This advances the ability to measure charge on nanometric samples. Experimental atomic force microscope (AFM) force-distance curves are collected under aqueous conditions with controlled pH and ion concentration. A mathematical model that considers a polarizable dielectric tip immersed in an electrolyte is used to obtain charge density from the AFM measurements. Interactions between the tip and the sample are modeled using theory that includes monopolar electrostatic interactions, dipolar interactions, screening from both the dielectric nature of ambient water and solvated ions as described by the linear Poisson-Boltzmann equation, and hard-core repulsion. It is found that the tip charge density changes on a timescale of hours requiring recalibration of the tip for experiments lasting more than an hour. As an example of how a charge-calibrated tip may be used, the surface charge densities on 20 individual carboxylate-modified polystyrene (PS) beads are measured. The average of these AFM-measured bead charge densities is compared with the value obtained from conventional titration combined with electron microscopy. The two values are found to agree within 20%. While the comparison demonstrates similarity of the two charge measurements, hypotheses are put forward as to why the two techniques might be expected not to provide identical mean charge densities. The considerations used to build these hypotheses thus underscore the relevance of the method performed here if charge information is required on individual nanoparticles.

The application of atomic force microscopy for viruses and protein shells: Imaging and spectroscopy

Atomic force microscopy (AFM) probes surface-adsorbed samples at the nanoscale by using a sharp stylus of nanometric size located at the end of a micro-cantilever. This technique can also work in a liquid environment and offers unique possibilities to study individual protein assemblies, such as viruses, under conditions that resemble their natural liquid milieu. Here, I show how AFM can be used to explore the topography of viruses and protein cages, including that of structures lacking a well-defined symmetry. AFM is not limited for imaging and allows the manipulation of individual viruses with force spectroscopy approaches, such as single indentation and mechanical fatigue assays. These pushing experiments deform the protein cages to obtain their mechanical information and can be used to monitor the structural changes induced by maturation or the exposure to different biochemical environments, such as pH variation. We discuss how studying capsid rupture and self-healing events offers insight into virus uncoating pathways. On the other hand, pulling tests can provide information about the virus-host interaction established between the viral fibers and the cell membrane.

Atomic Force Microscopy of Viruses

Atomic force microscopy employs a nanometric tip located at the end of a micro-cantilever to probe surface-mounted samples at nanometer resolution. Because the technique can also work in a liquid environment it offers unique possibilities to study individual viruses under conditions that mimic their natural milieu. Here, we review how AFM imaging can be used to study the surface structure of viruses including that of viruses lacking a well-defined symmetry. Beyond imaging, AFM enables the manipulation of single viruses by force spectroscopy experiments. Pulling experiments can provide information about the early events of virus-host interaction between the viral fibers and the cell membrane receptors. Pushing experiments measure the mechanical response of the viral capsid and its contents and can be used to show how virus maturation and exposure to different pH values change the mechanical response of the viruses and the interaction between the capsid and genome. Finally, we discuss how studying capsid rupture and self-healing events offers insight in virus uncoating pathways.

Microstructural metrology of tobacco mosaic virus nanorods during radial compression and heating

We determined stress-induced deformations and the thermal stability of nanorod-shaped tobacco mosaic virus (TMV) capsids in coffee-ring structures by X-ray nanodiffraction. The hexagonal capsids lattice transforms under compression in the outer boundary zone of the coffee-ring into a tetragonal lattice. The helical pitch of the nanorods increases by about 2.5% across the outer boundary zone while the lateral distance between nanorods decreases continuously across the whole coffee-ring structure by about 2% due to compressive forces. The diffraction patterns show a mixture of helical scattering and Bragg peaks attributed to a lattice of nanorods interlocked by their helical grooves. Thermo-nanodiffraction reveals water loss up to about 100 °C resulting in a reduction of the helical pitch by about 6% with respect to its maximum value and a reduction of the nanorods separation by about 0.5 nm. Up to about 200 °C the pitch is increasing again by about 2%. Secondary crystallization in the bulk reaches a maximum at 150-160 °C. At higher temperatures the crystallinity is continuously decreasing up to about 220 °C. Above about 200 °C and depending on the heating history, the nanorods start disintegrating into small, randomly oriented aggregates.

Atomic force microscopy of virus shells

Microscopes are used to characterize small specimens with the help of probes, such as photons and electrons in optical and electron microscopies, respectively. In atomic force microscopy (AFM) the probe is a nanometric tip located at the end of a microcantilever which palpates the specimen under study as a blind person manages a white cane to explore the surrounding. In this way, AFM allows obtaining nanometric resolution images of individual protein shells, such as viruses, in liquid milieu. Beyond imaging, AFM also enables the manipulation of single protein cages, and the characterization of every physico-chemical property able of inducing any measurable mechanical perturbation to the microcantilever that holds the tip. Here we describe several AFM approaches to study individual protein cages, including imaging and spectroscopic methodologies for extracting mechanical and electrostatic properties. In addition, AFM allows discovering and testing the self-healing capabilities of protein cages because occasionally they may recover fractures induced by the AFM tip. Beyond the protein shells, AFM also is able of exploring the genome inside, obtaining, for instance, the condensation state of dsDNA and measuring its diffusion when the protein cage breaks.