Cascade degradation of organic matters in brewery wastewater using a continuous stirred microbial electrochemical reactor and analysis of microbial communities

High-Performance Macroporous Free-Standing Microbial Fuel Cell Anode Derived from Grape for Efficient Power Generation and Brewery Wastewater Treatment

Microbial fuel cells (MFCs) have the potential to directly convert the chemical energy in organic matter into electrical energy, making them a promising technology for achieving sustainable energy production alongside wastewater treatment. However, the low extracellular electron transfer (EET) rates and limited bacteria loading capacity of MFCs anode materials present challenges in achieving high power output. In this study, three-dimensionally heteroatom-doped carbonized grape (CG) monoliths with a macroporous structure were successfully fabricated using a facile and low-cost route and employed as independent anodes in MFCs for treating brewery wastewater. The CG obtained at 900 °C (CG-900) exhibited excellent biocompatibility. When integrated into MFCs, these units initiated electricity generation a mere 1.8 days after inoculation and swiftly reached a peak output voltage of 658 mV, demonstrating an exceptional areal power density of 3.71 W m-2. The porous structure of the CG-900 anode facilitated efficient ion transport and microbial community succession, ensuring sustained operational excellence. Remarkably, even when nutrition was interrupted for 30 days, the voltage swiftly returned to its original level. Moreover, the CG-900 anode exhibited a superior capacity for accommodating electricigens, boasting a notably higher abundance of Geobacter spp. (87.1%) compared to carbon cloth (CC, 63.0%). Most notably, when treating brewery wastewater, the CG-900 anode achieved a maximum power density of 3.52 W m-2, accompanied by remarkable treatment efficiency, with a COD removal rate of 85.5%. This study provides a facile and low-cost synthesis technique for fabricating high-performance MFC anodes for use in microbial energy harvesting.

Multivariate comparison of taxonomic, chemical and operational data from 80 different full-scale anaerobic digester-related systems

BACKGROUND

The holistic characterization of different microbiomes in anaerobic digestion (AD) systems can contribute to a better understanding of these systems and provide starting points for bioengineering. The present study investigates the microbiome of 80 European full-scale AD systems. Operational, chemical and taxonomic data were thoroughly collected, analysed and correlated to identify the main drivers of AD processes.

RESULTS

The present study describes chemical and operational parameters for a broad spectrum of different AD systems. With this data, Spearman correlation and differential abundance analyses were applied to narrow down the role of the individual microorganisms detected. The authors succeeded in further limiting the number of microorganisms in the core microbiome for a broad range of AD systems. Based on 16S rRNA gene amplicon sequencing, MBA03, Proteiniphilum, a member of the family Dethiobacteraceae, the genus Caldicoprobacter and the methanogen Methanosarcina were the most prevalent and abundant organisms identified in all digesters analysed. High ratios for Methanoculleus are often described for agricultural co-digesters. Therefore, it is remarkable that Methanosarcina was surprisingly high in several digesters reaching ratios up to 47.2%. The various statistical analyses revealed that the microorganisms grouped according to different patterns. A purely taxonomic correlation enabled a distinction between an acetoclastic cluster and a hydrogenotrophic one. However, in the multivariate analysis with chemical parameters, the main clusters corresponded to hydrolytic and acidogenic microorganisms, with SAOB bacteria being particularly important in the second group. Including operational parameters resulted in digester-type specific grouping of microbes. Those with separate acidification stood out among the many reactor types due to their unexpected behaviour. Despite maximizing the organic loading rate in the hydrolytic pretreatments, these stages turned into extremely robust methane production units.

CONCLUSIONS

From 80 different AD systems, one of the most holistic data sets is provided. A very distinct formation of microbial clusters was discovered, depending on whether taxonomic, chemical or operational parameters were combined. The microorganisms in the individual clusters were strongly dependent on the respective reference parameters.

Vertical transfer and functional characterization of cotton seed core microbiome

Introduction

Microbiome within plant tissues is pivotal for co-evolution with host plants. This microbiome can colonize the plant, with potential transmission via seeds between parents and offspring, affecting seedling growth and host plant adaptability to the environment.

Methods

We employed 16S rRNA gene amplicon analysis to investigate the vertical distribution of core microbiome in cotton seeds across ecological niches [rhizosphere, root, stem, leaf, seed and seed-P (parental seed)] of the three cotton genotypes.

Results

The findings demonstrated a significant decrease in microbiome diversity and network complexity from roots, stems, and leaves to seeds. The microenvironment exerted a more substantial influence on the microbiome structure of cotton than the genotypes. The core endophytic microorganisms in cotton seeds comprised 29 amplicon sequence variants (ASVs) affiliated with Acidimicrobiia, Alphaproteobacteria, Bacilli, Bacteroidia, Clostridia, Gammaproteobacteria, and unclassified_Proteobacteria. These vertically transmitted taxa are widely distributed in cotton plants. Through 16S rRNA gene-based function prediction analysis of the cotton microbiome, we preliminarily understood that there are potential differences in metabolic capabilities and phenotypic traits among microbiomes in different microhabitats.

Discussion

In conclusion, this study demonstrated the crucial role of the microenvironment in influencing the cotton microbiome and offered insights into the structures and functions of the cotton seed microbiome, facilitating future crop yield enhancement through core seed microbiome regulation.

A feasibility investigation of a pilot-scale bioelectrochemical coupled anaerobic digestion system with centric electrode module for real membrane manufacturing wastewater treatment

The large-scale application of bioelectrochemical coupled anaerobic digestion (BES-AD) is limited by the matching of electrode configuration and the applicability of real wastewater. In this study, a pilot-scale BES-AD system with an effective system volume of 5 m³ and a 1 m³ volume of a carbon fiber brush electrode module was constructed and tested for treatment of the membrane manufacturing wastewater. The results showed that the BOD₅/COD of the wastewater was increased from 0.238 to 0.398 when the applied voltage was 0.9 V. The pollutants such as N, N-Dimethylacetamide and glycerol in wastewater were degraded significantly. The microorganisms in the electrode modules were spatially enriched. The fermenters (Norank_f__ML635J-40_aquatic_group, 6.55 %; unclassified_f__Propionibacteriaceae, 5.25 %) and degraders (Corynebacterium, 29.31 %) were mostly enriched at the bottom, while electroactive bacteria (Pseudomonas, 29.39 %, Geobacter, 7.86 %) were mostly enriched at the top. Combined with the economical construction and operation cost ($1708.8/m³ and $0.76/m³) of the BES-AD system.

High concentration of ammonia sensitizes the response of microbial electrolysis cells to tetracycline

Microbial electrolysis cell (MEC) is a promising technology for effective energy conversion of wastewater organics to biogas. Yet, in swine wastewater treatment, the complex contaminants including antibiotics may affect MEC performance, while the high ammonia concentration might increase this risk by increasing cell membrane permeability. In this work, the responses of MECs on tetracycline (TC) with low and high ammonia loadings (80 and 1000 mg L^-1) were fully investigated. The TC of 0 to 1 mg L^-1 slightly improved MEC performance in current production and electrochemical characteristics with low ammonia loading, while TC ≥ 4 mg L^-1 started to show negative effects. Generally, the high ammonia loading sensitized MECs to TC concentration, inducing the current and COD removal of MECs to sharply decline with TC ≥ 0.5 mg L^-1. The positive effect of high ammonia loading on MEC due to conductivity increase was counteracted with TC ≥ 1 mg L^-1. The co-contamination of TC and ammonia significantly decreased the bioactivity and biomass of anode biofilm. Although the high concentration of co-existing TC and ammonia inhibited MEC performance, the reactors still obtained positive energy feedback. The network analyses indicated that the effluent suspension contributed much to antibiotic resistance gene (ARG) transmission, while the microplastics (MPs) in wastewater greatly raised the risks of ARGs spreading. This work systematically examined the synergetic effects of TC and ammonia and the transmission of ARGs in MEC operation, which is conducive to expediting the application of MECs in swine wastewater treatment.

Organic Waste Substrates for Bioenergy Production via Microbial Fuel Cells: A Key Point Review

High-energy consumption globally has raised questions about the low environmentally friendly and high-cost processes used until now for energy production. Microbial fuel cells (MFCs) may support alternative more economically and environmentally favorable ways of bioenergy production based on their advantage of using waste. MFCs work as bio-electrochemical devices that consume organic substrates in order for the electrogenic bacteria and/or enzyme cultures to produce electricity and simultaneously lower the environmental hazardous value of waste such as COD. The utilization of organic waste as fuels in MFCs has opened a new research path for testing a variety of by-products from several industry sectors. This review presents several organic waste substrates that can be employed as fuels in MFCs for bioenergy generation and the effect of their usage on power density, COD (chemical oxygen demand) removal, and Coulombic efficiency enhancement. Moreover, a demonstration and comparison of the different types of mixed waste regarding their efficiency for energy generation via MFCs are presented. Future perspectives for manufacturing and cost analysis plans can support scale-up processes fulfilling waste-treatment efficiency and energy-output densities.

Effects of ammonia on electrochemical active biofilm in microbial electrolysis cells for synthetic swine wastewater treatment

When facing wastewater with high organic and ammonia, e. g. swine wastewater, microbial electrolysis cell (MEC) is emerging for energy extraction as hydrogen and methane. However, the effects of highly concentrated ammonia on MEC haven't been fully evaluated. In this study, single-chamber MECs were operated with acetate and sucrose as substrates under various ammonia concentrations. The current generally increased with ammonia loading from 80 to 3000 mg L^-1. Yet, the substrate consumption in MECs was inhibited with ammonia concentrations above 1000 mg L^-1. As a combined result, the energy recovery efficiency of MECs was stable. The electrochemical activity of anode biofilm reached the peak under 1000 mg L^-1 ammonia and was restricted under higher ammonia loadings. Under neutral pH, the NH₄⁺ increases the cell membrane permeability, which benefited the electrochemical activity of exoelectrogens to a proper extent. Nevertheless, the toxic ammonia also accelerated the anode biomass loss and stimulated the extracellular polymeric substance (EPS) secretion. Due to the current increase, the abundance of exoelectrogens generally raised with ammonia loading from 80 to 3000 mg L^-1. However, except for anode biomass loss, the carbon and methane metabolism pathways were inhibited in acetate-fed MEC, while the glycolysis acted as the rate-limiting step for substrate degradation in sucrose-fed conditions. This study systematically examined the influences of high ammonia loading on MEC performances, bio-community and anode electrochemical activities, and evaluated practical feasibility and application inch of MECs for the energy recovery and pollutant removal of high concentration organic and ammonia wastewater.

Current trends for distillery wastewater management and its emerging applications for sustainable environment

Ethanol distillation generates a huge volume of unwanted chemical liquid known as distillery wastewater. Distillery wastewater is acidic, dark brown having high biological oxygen demand, chemical oxygen demand, contains various salt contents, and heavy metals. Inadequate and indiscriminate disposal of distillery wastewater deteriorates the quality of the soil, water, and ultimately groundwater. Its direct exposure via food web shows toxic, carcinogenic, and mutagenic effects on aquatic-terrestrial organisms including humans. So, there is an urgent need for its proper management. For this purpose, a group of researchers applied distillery wastewater for fertigation while others focused on its physico-chemical, biological treatment approaches. But until now no cutting-edge technology has been proposed for its effective management. So, it becomes imperative to comprehend its toxicity, treatment methods, and implication for environmental sustainability. This paper reviews the last decade's research data on advanced physico-chemical, biological, and combined (physico-chemical and biological) methods to treat distillery wastewater and its reuse aspects. Finally, it revealed that the combined methods along with the production of value-added products are one of the best options for distillery wastewater management.

By-Products in the Malting and Brewing Industries—Re-Usage Possibilities

Beer production includes the formation of different by-products such as wastewater, spent grains, spent hops, and yeast. In addition to these well-known by-products, it is necessary to mention germ/rootlets, which also remain after the malting process. Given that a huge amount of beer is produced annually worldwide, by-products are available in large quantities throughout the year. Spent grains, spent hops, and spent yeasts are high-energy raw materials that possess a great potential for application in the branch of biotechnology, and the food industry, but these by-products are commonly used as livestock feed, disposed of in the fields, or incinerated. Breweries by-products can be utilized for microalgae production, biofuel production, extraction of proteins, polyphenolic, antioxidative substances, etc. This paper aims to address each of these by-products with an emphasis on their possible application in biotechnology and other industries.

Degradation of sulfamethoxazole in low-C/N ratio wastewater by a novel membrane bioelectrochemical reactor

Sulfamethoxazole (SMX) pollution in wastewater threatens public health. A novel membrane bioelectrochemical reactor (MBER) with loop operation was developed for SMX degradation in low-C/N ratio wastewater. A gas-permeable silicone membrane module was used to precisely control the dissolved oxygen in the catholyte and save energy. Compared with a traditional membrane bioreactor (i.e., open-circuit reactor), the removal of SMX was increased from 49.91% to 71.10% in the proposed MBER (i.e., closed-circuit reactor). Sequencing analyses revealed that SMX was removed via cometabolism with NH4+-N and COD removal in both the anode and cathode chambers. Six intermediates were detected as degradation products in the cathodic effluent; these intermediates pose a similar potential threat to the environment as SMX. Two possible degradation pathways, deduced from the sequencing analyses and degradation products, were proposed. These results provide a new technology for improving SMX removal through the integration/coupling of bioelectrochemical technology into a membrane bioreactor.

Eco-electrogenic treatment of dyestuff wastewater using constructed wetland-microbial fuel cell system with an evaluation of electrode-enriched microbial community structures

This work studied eco-electrogenic treatment of real dyestuff wastewater along with characterization of electrode-enriched microbial community structures in Fimbristylis dichotoma planted closed-circuit constructed wetland-microbial fuel cell (CW-MFC) system. The CW-MFC-2 (experimental system) achieved 82.2 ± 1.7% ADMI removal and 70 ± 2% COD reduction; that were found to be 9% and 7.4% higher than the standalone constructed wetland (CW) system (bioremediation control) respectively. Likewise, the CW-MFC-2 system achieved maximum power density of 198.8 mW/m², which was 85.6 ± 2.47% higher than the CW-MFC-1 system (eco-electricity control). Quantitative reverse transcription PCR (qRT-PCR) assays revealed significant down-regulation of hepatic oxidative stress response biomarker genes in Oreochromis niloticus exposed to CW-MFC-2 system treated dyestuff wastewater as compared with untreated wastewater. The biofilms associated with the anode and cathode of the CW-MFC-2 system exhibited selective enrichment of electrochemically active and dye degrading microbial communities.

A novel microbial electrolysis cell-A/O system treating cotton dyeing pretreatment wastewater: performance and microbial diversity analysis

The textile industry is developing rapidly in China. It generates large volumes of cotton dyeing pretreatment wastewater (CDPW). CDPW contains high concentrations of pollutants characterized by their strongly alkaline and recalcitrant nature for microbial degradation. This project aimed to evaluate the performance of a microbial electrolysis cell (MEC) coupled with anoxic/oxic (A/O) system (MEC-A/O) in treating CDPW, as well as analyze changes in microbial diversity. The results indicated that the effect of biological treatment in an electrolytic cell to treat CDPW was optimal at the voltage of 0.6V. The chemical oxygen demand (COD) removal efficiency under optimum conditions was 69.13%, higher than that of the A/O system alone (48.93%). Within a certain range, applied voltage was able to enhance microbial activity, increase the sludge concentration and enlarge the sludge particle size. At the same time, the applied voltage could effectively increase the abundance and the diversity of Bacteria and Archaea, as well as accelerate the degradation of pollutants.

Dynamics of Archaeal and Bacterial Communities in Response to Variations of Hydraulic Retention Time in an Integrated Anaerobic Fluidized-Bed Membrane Bioreactor Treating Benzothiazole Wastewater

An integrated anaerobic fluidized-bed membrane bioreactor (IAFMBR) was investigated to treat synthetic high-strength benzothiazole wastewater (50 mg/L) at a hydraulic retention time (HRT) of 24, 18, and 12 h. The chemical oxygen demand (COD) removal efficiency (from 93.6% to 90.9%), the methane percentage (from 70.9% to 69.27%), and the methane yield (from 0.309 m³ CH₄/kg·COD_removed to 0.316 m³ CH₄/kg·COD_removed) were not affected by decreasing HRTs. However, it had an adverse effect on membrane fouling (decreasing service period from 5.3 d to 3.2 d) and benzothiazole removal efficiency (reducing it from 97.5% to 82.3%). Three sludge samples that were collected on day 185, day 240, and day 297 were analyzed using an Illumina® MiSeq platform. It is striking that the dominant genus of archaea was always Methanosaeta despite of HRTs. The proportions of Methanosaeta were 80.6% (HRT 24), 91.9% (HRT 18), and 91.2% (HRT 12). The dominant bacterial genera were Clostridium in proportions of 23.9% (HRT 24), 16.4% (HRT 18), and 15.3% (HRT 12), respectively.

(Bio)electrochemical ammonia recovery: progress and perspectives

In recent years, (bio)electrochemical systems (B)ES have emerged as an energy efficient alternative for the recovery of TAN (total ammonia nitrogen, including ammonia and ammonium) from wastewater. In these systems, TAN is removed or concentrated from the wastewater under the influence of an electrical current and transported to the cathode. Subsequently, it can be removed or recovered through stripping, chemisorption, or forward osmosis. A crucial parameter that determines the energy required to recover TAN is the load ratio: the ratio between TAN loading and applied current. For electrochemical TAN recovery, an energy input is required, while in bioelectrochemical recovery, electric energy can be recovered together with TAN. Bioelectrochemical recovery relies on the microbial oxidation of COD for the production of electrons, which drives TAN transport. Here, the state-of-the-art of (bio)electrochemical TAN recovery is described, the performance of (B)ES for TAN recovery is analyzed, the potential of different wastewaters for BES-based TAN recovery is evaluated, the microorganisms found on bioanodes that treat wastewater high in TAN are reported, and the toxic effect of the typical conditions in such systems (e.g., high pH, TAN, and salt concentrations) are described. For future application, toxicity effects for electrochemically active bacteria need better understanding, and the technologies need to be demonstrated on larger scale.

Evaluation of microbial fuel cell (MFC) for bioelectricity generation and pollutants removal from sugar beet processing wastewater (SBPW)

Bioelectricity generation from biodegradable compounds using microbial fuel cells (MFCs) offers an opportunity for simultaneous wastewater treatment. This study evaluated the synergy of electricity generation by the MFC while reducing pollutants from sugar beet processing wastewater (SBPW). A simple dual-chamber MFC was constructed with inexpensive materials without using catalysts. Raw SBPW was diluted to several concentrations (chemical oxygen demand (COD) of 505 to 5,750 mg L^-1) and fed as batch-mode into the MFC without further modification. A power density of 14.9 mW m^-2 as power output was observed at a COD concentration of 2,565 mg L^-1. Coulombic efficiency varied from 6.21% to 0.73%, indicating diffusion of oxygen through the cation exchange membrane and other methanogenesis and fermentation processes occurring in the anode chamber. In this study, >97% of the COD and up to 100% of the total suspended solids removals were observed from MFC-treated SBPW. Scanning electron microscopy of anode indicated that a diverse community of microbial consortia was active for electricity generation and wastewater treatment. This study demonstrated that SBPW can be used as a substrate in the MFC to generate electricity as well as to treat for pollutant removal.

Nanoscale zero-valent iron/persulfate enhanced upflow anaerobic sludge blanket reactor for dye removal: Insight into microbial metabolism and microbial community

This study investigated the efficiency of nanoscale zero-valent iron combined with persulfate (NZVI/PS) for enhanced degradation of brilliant red X-3B in an upflow anaerobic sludge blanket (UASB) reactor, and examined the effects of NZVI/PS on anaerobic microbial communities during the treatment process. The addition of NZVI (0.5 g/L) greatly enhanced the decolourization rate of X-3B from 63.8% to 98.4%. The Biolog EcoPlate^TM technique was utilized to examine microbial metabolism in the reactor, and the Illumina MiSeq high-throughput sequencing revealed 22 phyla and 88 genera of the bacteria. The largest genera (Lactococcus) decreased from 33.03% to 7.94%, while the Akkermansia genera increased from 1.69% to 20.23% according to the abundance in the presence of 0.2 g/L NZVI during the biological treatment process. Meanwhile, three strains were isolated from the sludge in the UASB reactors and identified by 16 S rRNA analysis. The distribution of three strains was consistent with the results from the Illumina MiSeq high throughput sequencing. The X-ray photoelectron spectroscopy results indicated that Fe(0) was transformed into Fe(II)/Fe(III) during the treatment process, which are beneficial for the microorganism growth, and thus promoting their metabolic processes and microbial community.

Cooperative growth of Geobacter sulfurreducens and Clostridium pasteurianum with subsequent metabolic shift in glycerol fermentation

Interspecies electron transfer is a common way to couple metabolic energy balances between different species in mixed culture consortia. Direct interspecies electron transfer (DIET) mechanism has been recently characterised with Geobacter species which couple the electron balance with other species through physical contacts. Using this mechanism could be an efficient and cost-effective way to directly control redox balances in co-culture fermentation. The present study deals with a co-culture of Geobacter sulfurreducens and Clostridium pasteurianum during glycerol fermentation. As a result, it was shown that Geobacter sulfurreducens was able to grow using Clostridium pasteurianum as sole electron acceptor. C. pasteurianum metabolic pattern was significantly altered towards improved 1,3-propanediol and butyrate production (+37% and +38% resp.) at the expense of butanol and ethanol production (−16% and −20% resp.). This metabolic shift was clearly induced by a small electron uptake that represented less than 0.6% of the electrons consumed by C. pasteurianum. A non-linear relationship was found between G. sulfurreducens growth (i.e the electrons transferred between the two species) and the changes in C. pasteurianum metabolite distribution. This study opens up new possibilities for controlling and increasing specificity in mixed culture fermentation.

A Pilot-scale Benthic Microbial Electrochemical System (BMES) for Enhanced Organic Removal in Sediment Restoration

A benthic microbial electrochemical systems (BMES) of 195 L (120 cm long, 25 cm wide and 65 cm height) was constructed for sediment organic removal. Sediment from a natural river (Ashi River) was used as test sediments in the present research. Three-dimensional anode (Tri-DSA) with honeycomb structure composed of carbon cloth and supporting skeleton was employed in this research for the first time. The results demonstrated that BMES performed good in organic-matter degradation and energy generation from sediment and could be considered for river sediments in situ restoration as novel method. Community analysis from the soil and anode using 16S rDNA gene sequencing showed that more electrogenic functional bacteria was accumulated in anode area when circuit connected than control system.

The effects of manganese oxide octahedral molecular sieve chitosan microspheres on sludge bacterial community structures during sewage biological treatment

This study examines the effects of manganese oxide octahedral molecular sieve chitosan microspheres (Fe₃O₄@OMS-2@CTS) on anaerobic and aerobic microbial communities during sewage biological treatment. The addition of Fe₃O₄@OMS-2@CTS (0.25 g/L) resulted in enhanced levels of operational performance for decolourization dye X-3B. However, degradation dye X-3B inhibition in the presence of Fe₃O₄@OMS-2@CTS was recorded as greater than or equal to 1.00 g/L. Illumina MiSeq high throughput sequencing of the 16 S rRNA gene showed that 108 genera were observed during the anaerobic process, while only 71 genera were observed during the aerobic process. The largest genera (Aequorivita) decreased from 21.14% to 12.65% and the Pseudomonas genera increased from 10.57% to 12.96% according to the abundance in the presence of 0.25 g/L Fe₃O₄@OMS-2@CTS during the anaerobic process. The largest Gemmatimonas genera decreased from 21.46% to 11.68% and the Isosphaerae genera increased from 5.8% to 11.98% according to the abundance in the presence of 0.25 g/L Fe₃O₄@OMS-2@CTS during the aerobic process. Moreover, the X-ray photoelectron spectroscopy results show that the valence states of Mn and Fe in Fe₃O₄@OMS-2@CTS changed during sewage biological treatment.