Narrowband random lasing in a Bismuth-doped active fiber

Tailoring the efficiency and spectrum of a green random laser generated by frequency doubling of random fiber lasers

Frequency doubling of random fiber lasers could provide an effective way to realize visible random lasing with the spectrum filled with random frequencies. In this paper, we make a comprehensive study on the efficiency and spectral manipulation of a green random laser generated by frequency doubling of an ytterbium-doped random fiber laser (YRFL). To tailor the efficiency of green random lasing generation, the ytterbium-doped random fiber lasing is filtered at different spectral positions, and then amplified to watt-level to serve as the fundamental laser source for frequency doubling in a periodically poled lithium niobate (PPLN) crystal. We found that by selecting different spectral components of ytterbium-doped random fiber lasing, the temporal intensity fluctuations of the filtered radiations vary dramatically, which plays an important role in enhancing the efficiency of frequency doubling. By fixing the filtering radiation wavelength at 1064.5 nm and tuning the central wavelength of YRFL, we experimentally demonstrate that, compared to the filtered radiation in the center of the spectrum, the efficiency of frequency doubling can be nearly doubled by utilizing the filtered ytterbium-doped random fiber lasing in the wings of the spectrum. As a result, the conversion efficiency of the generated green random laser at 532.25 nm can be more than 11% when the input power of the polarized 1064.5 nm fundamental light is 2.85W. For spectral manipulation, we realize a spectral tunable green random laser in the range of 529.9 nm to 537.3 nm with >100 mW output power for the first time by tuning the wavelength of YRFL and the temperature of PPLN simultaneously. The system can be naturally modified to simultaneously realize the efficiency enhancement and wavelength tuning, thus providing a new route to generate high efficiency and tunable visible random laser via frequency doubling that are potentially useful for imaging, sensing and visible light communication applications.

Temporal ghost imaging with random fiber lasers

Ghost imaging in the time domain has opened up new possibilities to retrieve ultrafast waveforms. A pre-requisite to ghost imaging in the time domain is a light source with random temporal intensity fluctuations that are fully uncorrelated over the duration of the temporal waveform being imaged. Here, we show that random fiber lasers are excellent candidates for ghost imaging in the time domain. We study the temporal correlations of the intensity fluctuations of a random fiber laser in different operating regimes and compare its performance in temporal ghost imaging configurations with that of a conventional multi-mode cavity-based fiber laser. Our results demonstrate that random fiber lasers can achieve superior performance for ghost imaging as compared to cavity-based fiber lasers where strong correlations at the cavity round-trip time can yield artefacts for waveforms of long duration.

Flexible spectral manipulation property of a high power linearly polarized random fiber laser

Fiber lasers with flexible spectral manipulation property could provide a flexible tool for scenes where the temporal coherence property accounts, for example, coherent sensing/communication and nonlinear frequency conversion. Due to the good laser performance and relative simplicity of implementation, random fiber lasers (RFLs) based on random distributed feedback and Raman gain have earned more and more attention in the past few years, and a variety of RFLs with substantially different spectral properties have been developed. In this presentation, we demonstrate a high power linearly polarized RFL with flexible spectral manipulation property, in which the central wavelength and the linewidth of the spectrum can be tuned independently through a bandwidth-adjustable tunable optical filter (BA-TOF). The central wavelength of the RFL can be continuously tuned from 1095 to 1115 nm, while the full width at half-maximum (FWHM) linewidth has a maximal tuning range from ~0.6 to more than 2 nm. Moreover, the output power of 1102.5-1112.5 nm reaches ~23 W with polarization extinction ratio (PER) value > 20 dB. To the best of our knowledge, this is the first demonstration of a powerful linearly polarized RFL with both wavelength and linewidth tunability.

Incoherently pumped high-power linearly-polarized single-mode random fiber laser: experimental investigations and theoretical prospects

We present a hundred-watt-level linearly-polarized random fiber laser (RFL) pumped by incoherent broadband amplified spontaneous emission (ASE) source and prospect the power scaling potential theoretically. The RFL employs half-opened cavity structure which is composed by a section of 330 m polarization maintained (PM) passive fiber and two PM high reflectivity fiber Bragg gratings. The 2nd order Stokes light centered at 1178 nm reaches the pump limited maximal power of 100.7 W with a full width at half-maximum linewidth of 2.58 nm and polarization extinction ratio of 23.5 dB. The corresponding ultimate quantum efficiency of pump to 2nd order Stokes light is 86.43%. To the best of our knowledge, this is the first demonstration of linearly-polarized high-order RFL with hundred-watt output power. Furthermore, the theoretical investigation indicates that 300 W-level linearly-polarized single-mode 1st order Stokes light can be obtained from incoherently pumped RFL with 100 m PM passive fiber.

Random distributed feedback fiber laser at 2.1 μm

We demonstrate a random distributed feedback fiber laser at 2.1 μm. A high-power pulsed Tm-doped fiber laser operating at 1.94 μm with a temporal duty ratio of 30% was employed as a pump laser to increase the equivalent incident pump power. A piece of 150 m highly GeO₂-doped silica fiber that provides a strong Raman gain and random distributed feedbacks was used to act as the gain medium. The maximum output power reached 0.5 W with the optical efficiency of 9%, which could be further improved by more pump power and optimized fiber length. To the best of our knowledge, this is the first demonstration of random distributed feedback fiber laser at 2 μm band based on Raman gain.