Application of a cell microarray chip system for accurate, highly sensitive, and rapid diagnosis for malaria in Uganda

Single-Cell Microarray Chip with Inverse-Tapered Wells to Maintain High Ratio of Cell Trapping

A single-cell microarray (SCM) influenced by gravitational force is expected to be one of the simple methods in various fields such as DNA analysis and antibody production. After trapping the cells in the SCM chip, it is necessary to remove the liquid from the SCM to wash away the un-trapped cells on the chip and treat the reagents for analysis. The flow generated during this liquid exchange causes the trapped cells to drop out of conventional vertical wells. In this study, we propose an inverse-tapered well to keep trapped cells from escaping from the SCM. The wells with tapered side walls have a reduced force of flow toward the opening, which prevents trapped cells from escaping. The proposed SCM chip was fabricated using 3D photolithography and polydimethylsiloxane molding techniques. In the trapping experiment using HeLa cells, the cell residual rate increased more than two-fold for the SCM chip with the inverse-tapered well with a taper angle of 30° compared to that for the conventional vertical SCM chip after multiple rounds of liquid exchanges. The proposed well structure increases the number of trapped cells and decreases the cell dropout rate to improve the efficiency of cellular analysis.

Advances in Microfluidics for Single Red Blood Cell Analysis

The utilizations of microfluidic chips for single RBC (red blood cell) studies have attracted great interests in recent years to filter, trap, analyze, and release single erythrocytes for various applications. Researchers in this field have highlighted the vast potential in developing micro devices for industrial and academia usages, including lab-on-a-chip and organ-on-a-chip systems. This article critically reviews the current state-of-the-art and recent advances of microfluidics for single RBC analyses, including integrated sensors and microfluidic platforms for microscopic/tomographic/spectroscopic single RBC analyses, trapping arrays (including bifurcating channels), dielectrophoretic and agglutination/aggregation studies, as well as clinical implications covering cancer, sepsis, prenatal, and Sickle Cell diseases. Microfluidics based RBC microarrays, sorting/counting and trapping techniques (including acoustic, dielectrophoretic, hydrodynamic, magnetic, and optical techniques) are also reviewed. Lastly, organs on chips, multi-organ chips, and drug discovery involving single RBC are described. The limitations and drawbacks of each technology are addressed and future prospects are discussed.

Current Advances and Future Perspectives of Advanced Polymer Processing for Bone and Tissue Engineering: Morphological Control and Applications

Advanced polymer processing has received extensive attention due to its unique control of complex force fields and customizability, and has been widely applied in various fields, especially in preparation of functional devices for bioengineering and biotechnology. This review aims to provide an overview of various advanced polymer processing techniques including rotation extrusion, electrospinning, micro injection molding, 3D printing and their recent progresses in the field of cell proliferation, bone repair, and artificial blood vessels. This review dose not only attempts to provide a comprehensive understanding of advanced polymer processing, but also aims to guide for design and fabrication of next-generation device for biomedical engineering.

Novel Quick Cell Patterning Using Light-Responsive Gas-Generating Polymer and Fluorescence Microscope

Conventional cell patterning methods are mainly based on hydrophilic/hydrophobic differences or chemical coating for cell adhesion/non-adhesion with wavering strength as it varies with the substrate surface conditions, including the cell type and the extracellular matrix components (ECMs) coating; thus, the versatility and stability of cell patterning methods must be improved. In this study, we propose a new cell patterning method using a light-responsive gas-generating polymer (LGP) and a conventional fluorescence microscope. Herein, cells and cellular tissues are easily released from the substrate surface by the nitrogen gas bubbles generated from LGP by the excitation light for fluorescence observation without harming the cells. The LGP-implanted chip was fabricated by packing LGP into a polystyrene (PS) microarray chip with a concave pattern. HeLa cells were spread on the LGP-implanted chips coated with three different ECMs (fibronectin, collagen, and poly-D-lysine), and all HeLa cells on the three LGP patterns were released. The pattern error between the LGP pattern and the remaining HeLa cells was 8.81 ± 4.24 μm, less than single-cell size. In addition, the LGP-implanted chip method can be applied to millimeter-scale patterns, with less than 30 s required for cell patterning. Therefore, the proposed method is a simple and rapid cell patterning method with high cell patterning accuracy of less than the cell size error, high scalability, versatility, and stability unaffected by the cell type or the ECM coating.

Multi-Omics Advancements towards Plasmodium vivax Malaria Diagnosis

Plasmodium vivax malaria is one of the most lethal infectious diseases, with 7 million infections annually. One of the roadblocks to global malaria elimination is the lack of highly sensitive, specific, and accurate diagnostic tools. The absence of diagnostic tools in particular has led to poor differentiation among parasite species, poor prognosis, and delayed treatment. The improvement necessary in diagnostic tools can be broadly grouped into two categories: technologies-driven and omics-driven progress over time. This article discusses the recent advancement in omics-based malaria for identifying the next generation biomarkers for a highly sensitive and specific assay with a rapid and antecedent prognosis of the disease. We summarize the state-of-the-art diagnostic technologies, the key challenges, opportunities, and emerging prospects of multi-omics-based sensors.

Highly Sensitive and Rapid Quantitative Detection of Plasmodium falciparum Using an Image Cytometer

The gold standard for malaria diagnosis is microscopic examination of blood films by expert microscopists. It is important to detect submicroscopic and asymptomatic Plasmodium infections in people, therefore the development of highly sensitive devices for diagnosing malaria is required. In the present study, we investigated whether an imaging cytometer was useful for the highly sensitive quantitative detection of parasites. Whole blood samples were prepared from uninfected individuals spiked with Plasmodium falciparum-infected erythrocytes. Thereafter, erythrocytes were purified using a push column comprising of a syringe filter unit with SiO₂-nanofiber filters. After adding the erythrocytes, stained with nuclear stain, to a six-well plate, quantitative detection of the parasites was performed using an image cytometer, CQ1. Imaging of 2.6 × 10⁶ erythrocytes was completed in 3 min, and the limit of detection indicated parasitemia of 0.00010% (≈5 parasites/μL of blood). In addition to rapid, highly sensitive, and quantitative detection, the ease of application and economic costs, image cytometry could be efficiently applied to diagnose submicroscopic parasites in infected people from endemic countries.

Protective effects of Olyset® Net on Plasmodium falciparum infection after three years of distribution in western Kenya

Background

Several types of insecticides, treating technologies and materials are available for long-lasting insecticide-treated nets (LLINs). The variations may result in different efficacies against mosquitoes and correspondingly infection risks for the Plasmodium falciparum malaria parasite. This cross-sectional study investigated whether infection risk varied among children who slept under different LLIN brands in rural villages of western Kenya.

Methods

Children sleeping under various types of LLINs were tested for P. falciparum infection using a diagnostic polymerase chain reaction (PCR) assay. Data were collected for other potential factors associated with infection risk: sleeping location (with bed/without bed), number of persons sharing the same net, dwelling wall material, gap of eaves (open/close), proportional hole index, socio-economic status, and density of indoor resting anophelines. Bed-net efficacy against the Anopheles gambiae susceptible strain was estimated using the WHO cone test and the tunnel test. The residual insecticide content on nets was measured.

Results

Seven LLIN brands were identified, and deltamethrin-based DawaPlus® 2.0 was the most popular (48%) followed by permethrin-based Olyset® Net (28%). The former LLIN was distributed in the area about six months before the present study was conducted, and the latter net was distributed at least three years before. Of 254 children analysed, P. falciparum PCR-positive prevalence was 58% for DawaPlus® 2.0 users and 38% for Olyset® users. The multiple regression analysis revealed that the difference was statistically significant (adjusted OR: 0.67, 95% credible interval: 0.45–0.97), whereas the confounders were not statistically important. Among randomly selected net samples, all DawaPlus® 2.0 (n = 20) and 95% of Olyset® (n = 19) passed either the cone test or the tunnel test.

Conclusions

Olyset® was more effective in reducing infection risk compared with DawaPlus® 2.0. Although the data from the present study were too limited to explain the mechanism clearly, the results suggest that the characteristics of the former brand are more suitable for the conditions, such as vector species composition, of the study area.

Quantitative Detection of Plasmodium falciparum Using, LUNA-FL, A Fluorescent Cell Counter

The microscopic examination of Giemsa-stained thin and/or thick blood films (Giemsa microscopy) is the standard method of malaria diagnosis. However, the results of the diagnosis significantly depend on the skills of clinical technicians. Furthermore, sample preparation and analysis are laborious and time-consuming. Therefore, in this study, we investigated if a commercially available fluorescent cell counter, LUNA-FL, was useful for the detection of Plasmodium parasite and the estimation of parasitemia. Whole blood samples from uninfected persons, spiked with P. falciparum-infected erythrocytes, were analysed. Most of the leucocytes and platelets were removed from whole blood samples with SiO₂-nanofiber filters set on spin columns. The filtered samples were stained with acridine orange, and automatic detection, as well as counting of erythrocytes and parasites, were performed using LUNA-FL. Whole blood, with various levels of parasites, was analysed by Giemsa microscopy or with LUNA-FL to estimate parasitemia, and a comparative analysis was performed. The coefficient determination value of the regression line was high (R² = 0.98), indicating that accurate quantitative parasite detection could be performed using LUNA-FL. LUNA-FL has a low running cost; it is compact, fast, and easy to operate, and may therefore be useful for point-of-care testing in the endemic areas.

Analysis of Single Nucleotide-Mutated Single-Cancer Cells Using the Combined Technologies of Single-Cell Microarray Chips and Peptide Nucleic Acid-DNA Probes

Research into cancer cells that harbor gene mutations relating to anticancer drug-resistance at the single-cell level has focused on the diagnosis of, or treatment for, cancer. Several methods have been reported for detecting gene-mutated cells within a large number of non-mutated cells; however, target single nucleotide-mutated cells within a large number of cell samples, such as cancer tissue, are still difficult to analyze. In this study, a new system is developed to detect and isolate single-cancer cells expressing the T790M-mutated epidermal growth factor receptor (EGFR) mRNA from multiple non-mutated cancer cells by combining single-cell microarray chips and peptide nucleic acid (PNA)-DNA probes. The single-cell microarray chip is made of polystyrene with 62,410 microchambers (31-40 µm diameter). The T790M-mutated lung cancer cell line, NCI-H1975, and non-mutated lung cancer cell line, A549, were successfully separated into single cells in each microchambers on the chip. Only NCI-H1975 cell was stained on the chip with a fluorescein isothiocyanate (FITC)-conjugated PNA probe for specifically detecting T790M mutation. Of the NCI-H1975 cells that spiked into A549 cells, 0–20% were quantitatively analyzed within 1 h, depending on the spike concentration. Therefore, our system could be useful in analyzing cancer tissue that contains a few anticancer drug-resistant cells.

Development of a quantitative, portable, and automated fluorescent blue-ray device-based malaria diagnostic equipment with an on-disc SiO2 nanofiber filter

There is an urgent need to develop an automated malaria diagnostic system that can easily and rapidly detect malaria parasites and determine the proportion of malaria-infected erythrocytes in the clinical blood samples. In this study, we developed a quantitative, mobile, and fully automated malaria diagnostic system equipped with an on-disc SiO₂ nanofiber filter and blue-ray devices. The filter removes the leukocytes and platelets from the blood samples, which interfere with the accurate detection of malaria by the blue-ray devices. We confirmed that the filter, which can be operated automatically by centrifugal force due to the rotation of the disc, achieved a high removal rate of leukocytes (99.7%) and platelets (90.2%) in just 30 s. The automated system exhibited a higher sensitivity (100%) and specificity (92.8%) for detecting Plasmodium falciparum from the blood of 274 asymptomatic individuals in Kenya when compared to the common rapid diagnosis test (sensitivity = 98.1% and specificity = 54.8%). This indicated that this system can be a potential alternative to conventional methods used at local health facilities, which lack basic infrastructure.

Reaction injection molding of hydrophilic-in-hydrophobic femtolitre-well arrays

Patterning of micro- and nanoscale topologies and surface properties of polymer devices is of particular importance for a broad range of life science applications, including cell-adhesion assays and highly sensitive bioassays. The manufacturing of such devices necessitates cumbersome multiple-step fabrication procedures and results in surface properties which degrade over time. This critically hinders their wide-spread dissemination. Here, we simultaneously mold and surface energy pattern microstructures in off-stoichiometric thiol-ene by area-selective monomer self-assembly in a rapid micro-reaction injection molding cycle. We replicated arrays of 1,843,650 hydrophilic-in-hydrophobic femtolitre-wells with long-term stable surface properties and magnetically trapped beads with 75% and 87.2% efficiency in single- and multiple-seeding events, respectively. These results form the basis for ultrasensitive digital biosensors, specifically, and for the fabrication of medical devices and life science research tools, generally.

Development of a highly sensitive, quantitative, and rapid detection system for Plasmodium falciparum-infected red blood cells using a fluorescent blue-ray optical system

A highly sensitive diagnostic system for determining low-density infections that are missed by conventional methods is necessary to detect the carriers of Plasmodium falciparum. A fluorescent blue-ray optical system with a polycarbonate scan disc was developed to detect P. falciparum-infected red blood cells (Pf-iRBCs), and nine samples could be analyzed simultaneously. The cultured P. falciparum strain 3D7 was used to examine the potential of the system for diagnosing malaria. After an RBC suspension had been applied to the disc, the cells were dispersed on the disc by rotation. During the 10 min standing period to allow the RBCs to settle on the disc surface, the cells were simultaneously stained with nuclear fluorescence staining dye Hoechst 34580, which was previously adsorbed on the disc surface. RBCs were arranged on the disc surface as a monolayer by removing excess cells through momentary rotation. Over 1.1 million RBCs remained on the disc for fluorescence analysis. A portable, battery-driven fluorescence image reader was employed to detect fluorescence-positive RBCs for approximately 40 min. A good correlation between examination of Giemsa-stained RBCs by light microscopy and the developed system was demonstrated in the parasitemia range of 0.0001-1.0% by linear regression analysis (R2 = 0.99993). The limit of detection of 0.00020% and good reproducibility for parasitemia determination were observed. The ability of the developed system to detect sub-microscopic low-density Pf-iRBCs and provide accurate quantitative evaluation with easy operation was demonstrated.

Loop-Mediated Isothermal Amplification In Microchambers On A Cell Microarray Chip For Identification of Plasmodium Species

Malaria is caused by Plasmodium spp., a parasitic protist that infects erythrocytes. A method that can detect the parasite with high sensitivity and that can identify the parasite species is urgently required for the control of malaria. The cell microarray chip was made using polystyrene with 200 cone-shaped frustum microchambers (800-μm top diameter, 636-μm bottom diameter, and 225 μm deep). Approximately 3,000 erythrocytes could be accommodated in each microchamber with monolayer formation, there being 60,000 erythrocytes in total microchambers on a cell microarray. Plasmodium could be quantitatively detected with high sensitivity with the use of cell microarray chips. Plasmodium parasitizing in erythrocytes was labeled with a cell-permeant fluorescent nucleic acid stain (SYTO 21), which could be detected in erythrocytes in the microchambers. Next, we used loop-mediated isothermal amplification (LAMP) in the microchambers (on-chip LAMP) to identify the parasite species detected in the microchambers. LAMP was performed in the microchambers (in a reaction volume of 0.09 μl) using Plasmodium falciparum-infected erythrocytes as the template and specific primers targeting 18S rRNA. To avoid evaporation of the reaction buffer during heat treatment, mineral oil was overlaid on each microchamber and the cell microarray chips were heated at 63 C for 1 hr. The results of on-chip LAMP were assessed using a portable ultraviolet transilluminator. We showed that this method has the potential for detection of parasites in 600,000 erythrocytes and for identification of the parasite species on a cell microarray chip. In conclusion, the parasites can be detected quantitatively with high sensitivity, and the species can be identified with the use of cell microarray chips.

Shape oscillations of single blood drops: applications to human blood and sickle cell disease

Sickle cell disease (SCD) is an inherited blood disorder associated with severe anemia, vessel occlusion, poor oxygen transport and organ failure. The presence of stiff and often sickle-shaped red blood cells is the hallmark of SCD and is believed to contribute to impaired blood rheology and organ damage. Most existing measurement techniques of blood and red blood cell physical properties require sample contact and/or large sample volume, which is problematic for pediatric patients. Acoustic levitation allows rheological measurements in a single drop of blood, simultaneously eliminating the need for both contact containment and manipulation of samples. The technique shows that the shape oscillation of blood drops is able to assess blood viscosity in normal and SCD blood and demonstrates an abnormally increased viscosity in SCD when compared with normal controls. Furthermore, the technique is sensitive enough to detect viscosity changes induced by hydroxyurea treatment, and their dependence on the total fetal hemoglobin content of the sample. Thus this technique may hold promise as a monitoring tool for assessing changes in blood rheology in sickle cell and other hematological diseases.

Antimalarial bednet protection of children disappears when shared by three or more people in a high transmission setting of western Kenya

A sizeable proportion of households is forced to share single long-lasting insecticide treated net (LLIN). However, the relationship between increasing numbers of people sharing a net and the risk for Plasmodium infection is unclear. This study revealed whether risk for Plasmodium falciparum infection is associated with the number of people sharing a LLIN in a holoendemic area of Kenya. Children ⩽5 years of age were tested for P. falciparum infection using polymerase chain reaction. Of 558 children surveyed, 293 (52.5%) tested positive for parasitaemia. Four hundred and fifty-eight (82.1%) reported sleeping under a LLIN. Of those, the number of people sharing a net with the sampled child ranged from 1 to 5 (median = 2). Children using a net alone or with one other person were at lower risk than non-users (OR = 0.29, 95% CI 0.10-0.82 and OR = 0.47, 95% CI 0.22-0.97, respectively). On the other hand, there was no significant difference between non-users and children sharing a net with two (OR = 0.88, 95% CI 0.44-1.77) or more other persons (OR = 0.75, 95% CI 0.32-1.72). LLINs are effective in protecting against Plasmodium infection in children when used alone or with one other person compared with not using them. Public health professionals should inform caretakers of the risks of too many people sharing a net.

Hydrophilic-treated plastic plates for wide-range analysis of Giemsa-stained red blood cells and automated Plasmodium infection rate counting

BACKGROUND

Malaria is a red blood cell (RBC) infection caused by Plasmodium parasites. To determine RBC infection rate, which is essential for malaria study and diagnosis, microscopic evaluation of Giemsa-stained thin blood smears on glass slides ('Giemsa microscopy') has been performed as the accepted gold standard for over 100 years. However, only a small area of the blood smear provides a monolayer of RBCs suitable for determination of infection rate, which is one of the major reasons for the low parasite detection rate by Giemsa microscopy. In addition, because Giemsa microscopy is exacting and time-consuming, automated counting of infection rates is highly desirable.

RESULTS

A method that allows for microscopic examination of Giemsa-stained cells spread in a monolayer on almost the whole surface of hydrophilic-treated cyclic olefin copolymer (COC) plates was established. Because wide-range Giemsa microscopy can be performed on a hydrophilic-treated plate, the method may enable more reliable diagnosis of malaria in patients with low parasitaemia burden. Furthermore, the number of RBCs and parasites stained with a fluorescent nuclear staining dye could be counted automatically with a software tool, without Giemsa staining. As a result, researchers studying malaria may calculate the infection rate easily, rapidly, and accurately even in low parasitaemia.

CONCLUSION

Because the running cost of these methods is very low and they do not involve complicated techniques, the use of hydrophilic COC plates may contribute to improved and more accurate diagnosis and research of malaria.