Mesoporous Silica Supported Pd-MnOx Catalysts with Excellent Catalytic Activity in Room-Temperature Formic Acid Decomposition

Carbon-coated silica supported palladium for hydrogen production from formic acid - Exploring the influence of strong metal support interaction

Hydrogen energy is one of the most promising energy carriers to solve the increasingly severe energy crisis. Formic acid decomposition (FAD) solves the storage and transportation problems of hydrogen gas since hydrogen can be produced from aqueous formic acid under mild conditions. To efficiently convert formic acid to hydrogen gas, chemical and structural modification of Pd nanoparticles or supports have been carried out, especially introducing the strong metal support interaction (SMSI). Herein, we synthesized core-shell structured SiO2@SC compounds as the supports to introduce SMIS to Pd/PdO nanoparticles. The relationship between FAD activity and SMSI is investigated. The SMSI between Pd/PdO nanoparticles and SiO2/SC is adjusted by altering the thickness of the carbon layer. The X-ray photoelectron spectroscopy shows that owing to the strong electron-attracting ability SiO2 core contributes to leading the Pd0 active site in an electron-deficient state. The thickness of the carbon layer controls the ratio of Pd0/PdO, which enhances the anti-poisoning ability of the catalyst. Owing to the electron-deficient state of Pd0 and optimal ratio of Pd0/PdO, the hydrogen desorption rate of FAD on Pd is enhanced, and the turn over frequency of Pd/SiO2@SC-1:3 catalyst reaches 1138 h-1, which is ten times higher than that of the pristine Pd/SC catalyst. These results are believed to guide the design and development of highly active Pd-based catalysts for hydrogen generation via FAD.

Direct Oxidation of Hibiscus cannabinus Stalks to Vanillin Using CeO2 Nanostructure Catalysts

Biomass lignin can be used to produce vanillin through an oxidation process. Although its purity is high, the processing time and separation efficiency are not ideal. This research aims to produce vanillin directly from Kenaf stalks without separating the lignin first from the lignocellulosic biomass. This method is greener because it does not require the separation of cellulose and hemicellulose from the biomass, thus minimizing the use of acid and alkaline solutions and saving time. A high oxygen storage capacity and release capacity of ceria as an oxidation catalyst contribute to the reversable redox properties between Ce4+ and Ce3+ in ceria lattice. Cerium oxide nanostructures were synthesized using a hydrothermal method treated under alkaline NaOH, followed by drying at 120 °C for 16 h and calcining at different temperatures between 400 and 600 °C for the direct oxidation of Kenaf stalks to vanillin under microwave irradiation. The catalysts were characterized for their physicochemical properties using XRD, N2 adsorption-desorption isotherms and TEM. All synthesized CeO2 nanostructures showed the presence of diffraction peaks assigned to the presence of cubic fluorite. The N2 adsorption-desorption isotherms showed that all catalysts possess a Type IV isotherm, indicating a mesoporous structure. The TEM image shows the uniform shape of the CeO2 nanostructures, while HRTEM images show that the CeO2 nanostructures are single-crystalline in nature. All catalysts were tested for the direct oxidation of Kenaf stalks using H2O2 as the oxidizing agent in temperatures ranging from 160 to 180 °C for 10-30 min with 0.1-0.3 g catalyst loading under 100-500 W of microwave irradiation. The CeO2-Nps-400 catalyst produced the highest vanillin yields of 3.84% and 4.32% for the direct oxidation of Kenaf stalks and extraction of lignin from Kenaf stalks, respectively. Compared to our earlier study, the highest vanillin yields of 2.90% and 3.70% for direct biomass and extracted lignin were achieved using a Ce/MgO catalyst.

Integration of plasmonic AgPd alloy nanoparticles with single-layer graphitic carbon nitride as Mott-Schottky junction toward photo-promoted H2 evolution

Plasmonic AgPd alloy nanoparticles (AgPdNPs) decorated on single-layer carbon nitride (AgPdNPs/SLCN) for the designing of the Mott-Schottky junction were constructed with the ultrasonically assisted hydrothermal method and used toward photo evolution H2 from formic acid (FA) at near room temperature (30 °C). The Pd atom contains active sites that are synergistically boosted by the localized surface plasmon resonance (LSPR) effect of Ag atoms, leading to considerably enhanced photocatalytic properties. The photoactive AgPdNPs/SLCN obtained supreme catalytic activity to produce 50 mL of gas (H2 + CO2) with the initial turnover frequency of 224 h-1 under light irradiation. The catalyst showed stable catalytic performance during successive cycles.

Carbon-Doping as Efficient Strategy for Improving Photocatalytic Activity of Polysilicon Supported Pd in Hydrogen Evolution from Formic Acid

Interest in cost-effective materials pushes researchers to the inexpensive and abundant semiconductors to use photons' energy for generating electrons and holes required for photocatalytic transformations. At the same time, polysilicon is one of the economic semiconductors with a disadvantage of high bandgap which could be solved by carbon-doping. We employed this strategy to the synthesis of carbon-doped polysilicon by a new approach starting from citric acid and methyltrimethoxysilane. The nanocomposite obtained was utterly characterized, and compared with bare polysilicon; increased UV-Vis absorbance and shift to higher wavelengths were the most notable characteristics of the synthesized catalyst. The carbon-doped polysilicon was modified with Pd nanoparticles to obtain a new heterogeneous photocatalyst for the formic acid degradation. The decomposition of formic acid was photocatalyzed by the obtained nanocomposite with a hydrogen production turnover frequency of up to 690 h-1. Moreover, it was demonstrated that the catalyst is stable and recyclable.

The Effect of Catalyst Calcination Temperature on Catalytic Decomposition of HFC-134a over γ-Al2O3

This paper explores the thermal and catalytic pyrolysis of HFC-134a over γ-Al2O3 calcined at temperatures of 550 °C (A550), 650 °C (A650), 750 °C (A750), and 850 °C (A850). The physicochemical properties of catalysts were studied through thermogravimetric analysis (TGA), Brunauer–Emmett–Teller equation for nitrogen physisorption analysis (BET), X-ray diffraction (XRD), and temperature-programmed desorption of ammonia (NH3-TPD). The non-catalytic pyrolysis of HFC-134a showed less than 15% decomposition of HFC-134a. Catalysts increased the decomposition as A650 revealed the highest decomposition efficiency by decomposing more than 95% HFC-134a for 8 h followed by A750, A850, and A550. The larger surface area and pore volume paired with a low amount of strong acidic sites were considered as the main contributors to the comparatively longer catalytic activity of A650.

A Brief Overview of Recent Progress in Porous Silica as Catalyst Supports

Porous silica particles have shown applications in various technological fields including their use as catalyst supports in heterogeneous catalysis. The mesoporous silica particles have ordered porosity, high surface area, and good chemical stability. These interesting structural or textural properties make porous silica an attractive material for use as catalyst supports in various heterogeneous catalysis reactions. The colloidal nature of the porous silica particles is highly useful in catalytic applications as it guarantees better mass transfer properties and uniform distribution of the various metal or metal oxide nanocatalysts in solution. The catalysts show high activity, low degree of metal leaching, and ease in recycling when supported or immobilized on porous silica-based materials. In this overview, we have pointed out the importance of porous silica as catalyst supports. A variety of chemical reactions catalyzed by different catalysts loaded or embedded in porous silica supports are studied. The latest reports from the literature about the use of porous silica-based materials as catalyst supports are listed and analyzed. The new and continued trends are discussed with examples.

Sustainable utilization of waste glycerol for 1,3-propanediol production over Pt/WOx/Al2O3 catalysts: Effects of catalyst pore sizes and optimization of synthesis conditions

Recycling of waste glycerol derived from biodiesel production to high value-added chemicals is essential for sustainable development of Bio-Circular-Green Economy. This work studied the conversion of glycerol to 1,3-propanediol over Pt/WO_x/Al₂O₃ catalysts, pointing out the impacts of catalyst pore sizes and operating conditions for maximizing the yield of 1,3-propanediol. The results suggested that both pore confinement effect and number of available reactive metals as well as operating conditions determined the glycerol conversion and 1,3-propanediol selectivity. The small-pore 5Pt/WO_x/S-Al₂O₃ catalyst (6.1 nm) gave a higher Pt dispersion (32.0%), a smaller Pt crystallite size (3.5 nm) and a higher number of acidity (0.47 mmol NH₃ g^-1) compared to those of the large-pore 5Pt/WO_x/L-Al₂O₃ catalyst (40.3 nm). However, glycerol conversion and 1,3-propanediol yield over the small-pore 5Pt/WO_x/S-Al₂O₃ catalyst were significantly lower than those of the large-pore Pt/WO_x/L-Al₂O₃ catalyst, suggesting that the diffusional restriction within the small-pore catalyst suppressed transportation of molecules to expose catalytic active sites, favoring the excessive hydrogenolysis of 1,3-propanediol, giving rise to undesirable products. The best 1,3-propanediol yield of 32.8% at 78% glycerol conversion were achieved over the 5Pt/WO_x/L-Al₂O₃ under optimal reaction condition of 220 °C, 6 MPa, 5 h reaction time and amount of catalyst to glycerol ratio of 0.25 g mL^-1. However, the 1,3-propanediol yield and glycerol conversion decreased to 19.6% and 51% after the 4th reaction-regeneration which were attributed to the carbonaceous deposition and the agglomeration of Pt particles.

Sustainable development and enhancement of cracking processes using metallic composites

Metallic composites represent a vital class of materials that has gained increased attention in crude oil processing as well as the production of biofuel from other sources in recent times. Several catalytic materials have been reported in the literature for catalytic cracking, particularly, of crude oil. This review seeks to provide a comprehensive overview of existing and emerging methods/technologies such as metal–organic frameworks (MOFs), metal–matrix composites (MMCs), and catalytic support materials, to bridge information gaps toward sustainable advancement in catalysis for petrochemical processes. There is an increase in industrial and environmental concern emanating from the sulphur levels of oils, hence the need to develop more efficient catalysts in the hydrotreatment (HDS and HDN) processes, and combating the challenge of catalyst poisoning and deactivation; in a bid to improving the overall quality of oils and sustainable use of catalyst. Structural improvement, high thermal stability, enhanced cracking potential, and environmental sustainability represent the various benefits accrued to the use of metallic composites as opposed to conventional catalysts employed in catalytic cracking processes.

Nanopore-Supported Metal Nanocatalysts for Efficient Hydrogen Generation from Liquid-Phase Chemical Hydrogen Storage Materials

Hydrogen has emerged as an environmentally attractive fuel and a promising energy carrier for future applications to meet the ever-increasing energy challenges. The safe and efficient storage and release of hydrogen remain a bottleneck for realizing the upcoming hydrogen economy. Hydrogen storage based on liquid-phase chemical hydrogen storage materials is one of the most promising hydrogen storage techniques, which offers considerable potential for large-scale practical applications for its excellent safety, great convenience, and high efficiency. Recently, nanopore-supported metal nanocatalysts have stood out remarkably in boosting the field of liquid-phase chemical hydrogen storage. Herein, the latest research progress in catalytic hydrogen production is summarized, from liquid-phase chemical hydrogen storage materials, such as formic acid, ammonia borane, hydrous hydrazine, and sodium borohydride, by using metal nanocatalysts confined within diverse nanoporous materials, such as metal-organic frameworks, porous carbons, zeolites, mesoporous silica, and porous organic polymers. The state-of-the-art synthetic strategies and advanced characterizations for these nanocatalysts, as well as their catalytic performances in hydrogen generation, are presented. The limitation of each hydrogen storage system and future challenges and opportunities on this subject are also discussed. References in related fields are provided, and more developments and applications to achieve hydrogen energy will be inspired.

Functionalized mesoporous SBA-15 silica: recent trends and catalytic applications

The development of advanced materials for heterogeneous catalytic applications requires fine control over the synthesis and structural parameters of the active site. Mesoporous silica materials have attracted increasing attention to be considered as an important class of nanostructured support materials in heterogeneous catalysis. Their large surface area, well-defined porous architecture and ability to incorporate metal atoms within the mesopores lead them to be a promising support material for designing a variety of different catalysts. In particular, SBA-15 mesoporous silica has its broad applicability in catalysis because of its comparatively thicker walls leading to higher thermal and mechanical stability. In this review article, various strategies to functionalize SBA-15 mesoporous silica have been reviewed with a view to evaluating its efficacy in different catalytic transformation reactions. Special attention has been given to the molecular engineering of the silica surface, within the framework and within the hexagonal mesoporous channels for anchoring metal oxides, single-site species and metal nanoparticles (NPs) serving as catalytically active sites.

Sustainable Low-Temperature Hydrogen Production from Lignocellulosic Biomass Passing through Formic Acid: Combination of Biomass Hydrolysis/Oxidation and Formic Acid Dehydrogenation

Hydrogen production from renewable resources, such as lignocellulosic biomass, is highly desired, under the most sustainable and mildest reaction conditions. In this study, a new sustainable three-step process for the production of hydrogen has been proposed. In the first step, a crude formic acid (CF) solution, which included typical reaction byproducts, in particular, acetic acid, levulinic acid, saccharides, 5-hydroxymethylfurfural, furfural, and lignin, was obtained through the combined hydrolysis/oxidation of the biomass, in the presence of diluted sulfuric acid/hydrogen peroxide, as homogeneous catalysts. In the second one, the distilled formic acid (DF) solution was obtained by distillation of the CF solution, for example, by isolating liquid byproducts, or the lignin-free CF (LCF) solution was recovered by CF filtration for the elimination of only solid lignin particles. In the final step, hydrogen was produced from the DF or LCF solutions through formic acid dehydrogenation over Pd supported on amine-functionalized mesoporous silica catalysts, in the presence of sodium formate, as an additive. The clean hydrogen, which is produced from biomass passing through formic acid, could be applied as an energy source of fuel cells. This new hydrogen production process is smart, allowing the hydrogen production with mild reaction conditions, eventually starting from different lignocellulosic feedstocks, and it could be integrated within the existing hydrothermal technology for levulinic acid production, which has been already recognized as efficient and sustainable. In addition to the production of hydrogen as an energy source of fuel cells, formic acid derived from biomass could be utilized as a platform chemical for chemical, agricultural, textile, leather, pharmaceutical, and rubber industries.

Bifunctional Cage-Type Cubic Mesoporous Silica SBA-1 Nanoparticles for Selective Adsorption of Dyes

Bifunctional SBA-1 mesoporous silica nanoparticles (MSNs) with carboxylic acid and amino groups (denoted as CNS-10-10) have been successfully synthesized, characterized, and employed as adsorbents for dye removal. Adsorbent CNS-10-10 shows high affinity towards cationic and anionic dyes in a wide pH range, and exhibits selective dye removal of a two-dye mixture system of cationic methylene blue and anionic eosin Y. By changing the pH of the medium, the selectivity of the adsorption behavior can be easily modulated. For comparison purposes, the counterparts, that is, pure silica SBA-1 MSNs (CS-0) and those with either carboxylic acid or amino functional groups (denoted as CS-10 and NS-10, respectively) were also prepared to evaluate their dye-adsorption behaviors. As revealed by the zeta-potential measurements, the electrostatic interaction between the adsorbent surface and the dye molecule plays an important role in the adsorption mechanism. Adsorbent CNS-10-10 can be easily regenerated and reused, and maintains its adsorption efficiency up to 80 % after four cycles.