Synthesis, characterization and drug loading property of Monomethoxy-Poly(ethylene glycol)-Poly(ε-caprolactone)-Poly(D,L-lactide) (MPEG-PCLA) copolymers

Doxorubicin-loaded Polymeric Biotin-PEG-SeSe-PBLA Micelles with surface Binding of Biotin-Mediated Cancer Cell Targeting and Redox-Responsive Drug release for enhanced anticancer efficacy

Biotin receptors are overexpressed in various cancer cell types, essential in tumor development, metabolism, and metastasis. Chemotherapeutic agents may be more effective and have fewer adverse effects if they specifically target the biotin receptors on cancer cells. Polymeric micelles (PMs) with nanoscale size via the EPR effect to accumulate near tumor tissue. We utilized the solvent exchange technique to crate polymeric Biotin-PEG-SeSe-PBLA micelles. This underwent self-assembly to create uniformly dispersed PMs with a hydrodynamic diameter of 81.54 ± 0.23 nm. The resulting PMs characterized by 1HNMR, 13CNMR, FTIR, and Raman spectroscopy. PMs exhibited a high efficacy of Doxorubicin encapsulation (EE) and loading content (DLC), with values of 5.93 wt% and 74.32 %, respectively. DOX@Biotin-PEG-SeSe-PBLA micelles showed optimal DOX release, around 89 % and 74 % in 10 mM glutathione and 0.1 % H2O2, respectively, within 72 hours, in the simulated cancer redox pool. Fascinatingly, the blank Biotin-PEG-SeSe-PBLA micelles did not affect the HaCaT or HeLa cell lines; approximately 85 % of the cells were metabolically active. Contrarily, at a 5 μg/ml concentration, DOX@Biotin-PEG-SeSe-PBLA specifically inhibited the proliferation of roughly 76 % of HeLa cells and 11 % of HaCaT cells. The fluorescence microscopy results demonstrated that biotin-decorated micelles were more successfully internalized by HeLa cells, which overexpress the biotin receptor, than by non-targeted micelles in vitro. In summary, the diselenide-linked Biotin-PEGSeSe-PBLA formed smart PMs that could offer DOX specific to cancer cells with precision and are physiologically durable.

Dual pH/redox-responsive hyperbranched polymeric nanocarriers with TME-trigger size shrinkage and charge reversible ability for amplified chemotherapy of breast cancer

A novel pH/redox-responsive hyperbranched MeO-PEG-b-(NIPAAm-co-PBAE) nanoparticles (NPs) were designed with size shrinkage and charge-reversible potential for targeted delivery of docetaxel (DTX) to MDA-MB-231 cell lines. In the tumor microenvironment (TME), amine protonation induces charge reversal and disulfide bond cleavage under high TME GSH concentration causing size shrinkage, improved deep tumor penetration, and active targeting of the therapeutic agents. These nano drug delivery systems (NDDSs) significantly promoted cancer cell uptake (~ 100% at 0.5 h), facilitating site-specific delivery and deep tumor penetration. The MTT assay revealed significantly higher cytotoxicity (P value < 0.0001) for DTX-loaded NPs compared to free DTX. Cell cycle analysis revealed G2/M (58.3 ± 2.1%) and S (21.5 ± 1.3%) arrest for DTX-loaded NPs, while free DTX caused G2/M (67.9 ± 1.1%) and sub-G1 (10.3 ± 0.8%) arrest. DTX-loaded NPs induced higher apoptosis (P value < 0.001) in MDA-MB-231 cells (71.5 ± 2.8%) compared to free DTX (42.3 ± 3.1%). Western blotting and RT-PCR assays confirmed significant up-regulation of protein levels and apoptotic genes by DTX-loaded NPs compared to free DTX. In conclusion, TME-responsive charge reversal and size-shrinkable smart NDDSs designed based on low pH, and high glutathione (GSH), offer more effective site-specific delivery of therapeutic agents to tumors.

Highly Stable Docetaxel-Loaded Nanoparticles Based on Poly(D,L-lactide)-b-Poly(ethylene glycol) for Cancer Treatment: Preparation, Characterization, and In Vitro Cytotoxicity Studies

Stability and narrow size distribution are among the main requirements that apply to drug formulations based on polymeric nanoparticles. In this study, we obtained a series of particles based on biodegradable poly(D,L-lactide)-b-poly(ethylene glycol) (P(D,L)LA_n-b-PEG₁₁₃) copolymers with varied hydrophobic P(D,L)LA block length n from 50 to 1230 monomer units stabilized by poly(vinyl alcohol) (PVA) by a simple "oil-in-water" emulsion method. We found that nanoparticles of P(D,L)LA_n-b-PEG₁₁₃ copolymers with relatively short P(D,L)LA block (n ≤ 180) are prone to aggregate in water. P(D,L)LA_n-b-PEG₁₁₃ copolymers with n ≥ 680 can form spherical unimodal particles with values of hydrodynamic diameter less than 250 nm and polydispersity less than 0.2. The aggregation behavior of P(D,L)LA_n-b-PEG₁₁₃ particles was elucidated in terms of tethering density and conformation of PEG chains at the P(D,L)LA core. Docetaxel (DTX) loaded nanoparticles based on P(D,L)LA₆₈₀-b-PEG₁₁₃ and P(D,L)LA₁₂₃₀-b-PEG₁₁₃ copolymers were formulated and studied. It was observed that DTX-loaded P(D,L)LA_n-b-PEG₁₁₃ (n = 680, 1230) particles are characterized by high thermodynamic and kinetic stability in aqueous medium. The cumulative release of DTX from the P(D,L)LA_n-b-PEG₁₁₃ (n = 680, 1230) particles is sustained. An increase in P(D,L)LA block length results in a decrease in DTX release rate. The in vitro antiproliferative activity and selectivity studies revealed that DTX-loaded P(D,L)LA₁₂₃₀-b-PEG₁₁₃ nanoparticles demonstrate better anticancer performance than free DTX. Favorable freeze-drying conditions for DTX nanoformulation based on P(D,L)LA₁₂₃₀-b-PEG₁₁₃ particles were also established.

Hydrophobic Drug Carrier from Polycaprolactone-b-Poly(Ethylene Glycol) Star-Shaped Polymers Hydrogel Blend as Potential for Wound Healing Application

Blending hydrogel with an amphiphilic polymer can increase the hydrophobic drug loading and entrapment efficiency of hydrogel-based formulations. In this study, a hydrogel formulation with star-shaped polycaprolactone-b-poly(ethylene glycol) (PCL-b-PEG) as the hydrophobic drug cargo is produced. The 4-arm and 6-arm star-shaped PCL are synthesized with different molecular weights (5000, 10,000, 15,000 g/mol) via ROP and MPEG as the hydrophilic segment is attached via the Steglich esterification. FTIR and ¹H-NMR analysis showed the presence of all functional groups for homopolymers and copolymers. M_n for all synthesized polymers is close to the theoretical value while GPC spectra showed a monomodal peak with narrow molecular weight distribution (PDI:1.01-1.25). The thermal degradation temperature and crystalline melting point of synthesized polymers increase with the increase in molecular weight and number of arms. All formulations possess high drug loading and entrapment efficiency (>99%) and increase with increasing molecular weight, number of arms, and amount of polymer in the formulations. All formulations showed a sustained drug release pattern with no initial burst, which follows the Korsmeyer-Peppas kinetic model. The polymer hydrogel formulations showed antibacterial activity against E. coli and S. aureus. The hydrogel containing 4-arm PCL_15k-PEG is chosen as the best formulation due to its high drug release, good antimicrobial activity, and morphology.

Polymers Based on PLA from Synthesis Using D,L-Lactic Acid (or Racemic Lactide) and Some Biomedical Applications: A Short Review

Poly(lactic acid) (PLA) is an important polymer that is based on renewable biomass resources. Because of environmental issues, more renewable sources for polymers synthesis have been sought for industrial purposes. In this sense, cheaper monomers should be used to facilitate better utilization of less valuable chemicals and therefore granting more sustainable processes. Some points are raised about the need to study the total degradability of any PLA, which may require specific composting conditions (e.g., temperature, type of microorganism, adequate humidity and aerobic environment). Polymerization processes to produce PLA are presented with an emphasis on D,L-lactic acid (or rac-lactide) as the reactant monomer. The syntheses involving homogeneous and heterogeneous catalytic processes to produce poly(D,L-Lactic acid) (PDLLA) are also addressed. Additionally, the production of blends, copolymers, and composites with PDLLA are also presented exemplifying different preparation methods. Some general applications of these materials mostly dedicated to the biomedical area over the last 10–15 years will be pointed out.

Formulation Development, Characterization and Antifungal Evaluation of Chitosan NPs for Topical Delivery of Voriconazole In Vitro and Ex Vivo

This study aims to develop chitosan-based voriconazole nanoparticles (NPs) using spray-drying technique. The effect of surfactants and polymers on the physicochemical properties, in vitro release, and permeation of NPs was investigated. The prepared NPs containing various surfactants and polymers (e.g., Tween 20 (T20), Tween 80 (T80), sodium lauryl sulfate (SLS), propylene glycol (PG), and Polyethylene glycol-4000 (PEG-4000)) were physiochemically evaluated for size, zeta potential, drug content, percent entrapment efficiency, in vitro release, and permeation across rats' skin. A Franz diffusion cell was used for evaluating the in vitro release and permeation profile. The voriconazole-loaded NPs were investigated for antifungal activity against Candida albicans (C. albicans). The prepared NPs were in the nano range (i.e., 160-500 nm) and positively charged. Images taken by a scanning electron microscope showed that all prepared NPs were spherical and smooth. The drug content of NPs ranged from 75% to 90%. Nanoparticle formulations exhibited a good in vitro release profile and transport voriconazole across the rat's skin in a slow control release manner. The NPs containing SLS, T80, and PG exhibited the best penetration and skin retention profile. In addition, the formulation exhibited a potential antifungal effect against C. albicans. It was concluded that the development of chitosan NPs has a great potential for the topical delivery of voriconazole against fungal infection.

Strategy for Synthesis of Statistically Sequence-Controlled Uniform PLGA and Effects of Sequence Distribution on Interaction and Drug Release Properties

Extensive studies have been conducted to elucidate the effects of such parameters as molecular weight, polydispersity, and composition on the controlled release properties of poly(d,l-lactic-co-glycolic acid) (PLGA). However, studies dealing with the effect of monomer sequence distribution have been sparse mainly because of the difficulty of precisely controlling the monomer sequence in PLGA. Herein, we present a semibatch copolymerization strategy that enables the production of statistically sequence-controlled "uniform PLGA" polymers through control of the rate of comonomer addition. Using this method, a series of PEG-PLGA samples having a comparable molecular weight and composition but different sequence distributions (uniform vs gradient) were prepared. The properties of these materials (PEG crystallization/melting, hygroscopicity, aqueous sol-gel transition, drug release kinetics) were found to significantly vary, demonstrating that sequence control only at the statistical level still significantly influences the properties of PLGA. Most notably, uniform PLGA exhibited the more sustained drug release behavior compared to gradient PLGA.

Fabrication of self-assembled nanostructures for intracellular drug delivery from diphenylalanine analogues with rigid or flexible chemical linkers

Self-assembly of molecular building blocks is a simple and useful approach to generate supramolecular structures with varied morphologies and functions. By studying the chemical properties of the building blocks and tuning the parameters of their self-assembly process, the resultant supramolecular assemblies can be optimized for the required downstream applications. To this end, in the present study we have designed and synthesized three different molecular building blocks composed of two diphenylalanine (FF) units connected to each other through three different linkers: ethylenediamine, succinic acid, or terephthalaldehyde. Under identical conditions, all the three building blocks self-assemble into supramolecular architectures with distinct morphologies. However, by varying the polarity of the self-assembly medium, the nature of the non-covalent interactions changes in such a way as to generate additional self-assembled structures unique to each building block. Utilizing microscopic and spectroscopic techniques, we characterized the morphological variety generated by each building block/linker combination. These data represent the first report analysing the diversity of nanostructures that can be generated from identical dipeptide-based molecular backbones simply by varying the chemical linker. We also demonstrate that the spherical assemblies and nanorod structures fabricated from these dipeptide/linker pairs can act as drug delivery systems. More specifically, the spherical assembly generated by two FF dipeptides linked via ethylenediamine and nanorods fabricated from terephthalaldehyde linked FF dipeptides were able to encapsulate the cancer chemotherapeutic agent doxorubicin (DOX) and chaperone the drug into cells. Thus, these supramolecular assemblies represent a new platform for the development of efficient and effective intracellular drug delivery systems.

Recent developments in selenium-containing polymeric micelles: prospective stimuli, drug-release behaviors, and intrinsic anticancer activity

Selenium is capable of forming a dynamic covalent bond with itself and other elements and can undergo metathesis and regeneration reactions under optimum conditions. Its dynamic nature endows selenium-containing polymers with striking sensitivity towards some environmental alterations. In the past decade, several selenium-containing polymers were synthesized and used for the preparation of oxidation-, reduction-, and radiation-responsive nanocarriers. Recently, thioredoxin reductase, sonication, and osmotic pressure triggered the cleavage of Se-Se bonds and swelling or disassembly of nanostructures. Moreover, some selenium-containing nanocarriers form oxidation products such as seleninic acids and acrylates with inherent anticancer activities. Thus, selenium-containing polymers hold promise for the fabrication of ultrasensitive and multifunctional nanocarriers of radiotherapeutic, chemotherapeutic, and immunotherapeutic significance. Herein, we discuss the most recent developments in selenium-containing polymeric micelles in light of their architecture, multiple stimuli-responsive properties, emerging immunomodulatory activities, and future perspectives in the delivery and controlled release of anticancer agents.

Achieving high singlet-oxygen generation by applying the heavy-atom effect to thermally activated delayed fluorescent materials

A bromine-substituted thermally activated delayed fluorescent (TADF) molecule AQCzBr2 is designed with both small singlet-triplet splitting (ΔEST) and increased spin-orbit coupling (SOC) to boost intersystem crossing (ISC) for singlet oxygen generation. AQCzBr2 nanoparticles (NPs) demonstrate high productivity of singlet oxygen generation (ΦΔ = 0.91) which allows highly efficient photodynamic therapy toward cancer cells.

Minocycline hydrochloride loaded mPEG-PCLA membranes: Preparation and in vitro evaluation for periodontitis therapy

This study was aimed at alleviating shortcomings in the treatment of periodontitis by preparation of a biopolymer membrane loaded with minocycline hydrochloride (MH) inserted into periodontal pockets to treat infections. Monomethoxy-poly (ethylene glycol)-poly (ε-caprolactone-co-L-lactide) (mPEG-PCLA) is a biocompatible and biodegradable amphiphilic block copolymer. It, therefore, has attracted considerable attention in drug delivery systems and periodontal treatment. We chose it as a membrane material for MH-drug loading. The MH-loaded membranes were prepared by the solvent casting technique with the content of 5, 8 and 10 wt.%, respectively. Fourier transform infrared spectra (FTIR) revealed no interaction between MH and polymer. The drug-loaded membrane surface morphology was investigated by scanning electron microscopy (SEM). In vitro release studies showed that the initial drug release exceeded 40% within 24 h, followed by a sustained release for up to 2 weeks, which would enable the therapeutic level to maintain over a longer time. The antibacterial activity studies in vitro demonstrated a positive effect on the periodontal pathogen. MH drug-loaded membranes have no adverse effect on the growth of periodontal ligament fibroblasts in the MTT test. The study suggests that mPEG-PCLA membranes containing MH are a potential antibacterial drug delivery system for local treatment of periodontitis.

Dissolution Enhancement and Controlled Release of Paclitaxel Drug via a Hybrid Nanocarrier Based on mPEG-PCL Amphiphilic Copolymer and Fe-BTC Porous Metal-Organic Framework

In the present work, the porous metal-organic framework (MOF) Basolite®F300 (Fe-BTC) was tested as a potential drug-releasing depot to enhance the solubility of the anticancer drug paclitaxel (PTX) and to prepare controlled release formulations after its encapsulation in amphiphilic methoxy poly(ethylene glycol)-poly(ε-caprolactone) (mPEG-PCL) nanoparticles. Investigation revealed that drug adsorption in Fe-BTC reached approximately 40%, a relatively high level, and also led to an overall drug amorphization as confirmed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The dissolution rate of PTX-loaded MOF was substantially enhanced achieving a complete (100%) release within four days, while the neat drug only reached a 13% maximum rate (3-4 days). This PTX-Fe-BTC nanocomposite was further encapsulated into a mPEG-PCL matrix, a typical aliphatic amphiphilic copolyester synthesized in our lab, whose biocompatibility was validated by in vitro cytotoxicity tests toward human umbilical vein endothelial cells (HUVEC). Encapsulation was performed according to the solid-in-oil-in-water emulsion/solvent evaporation technique, resulting in nanoparticles of about 143 nm, slightly larger of those prepared without the pre-adsorption of PTX on Fe-BTC (138 nm, respectively). Transmission electron microscopy (TEM) imaging revealed that spherical nanoparticles with embedded PTX-loaded Fe-BTC nanoparticles were indeed fabricated, with sizes ranging from 80 to 150 nm. Regions of the composite Fe-BTC-PTX system in the infrared (IR) spectrum are identified as signatures of the drug-MOF interaction. The dissolution profiles of all nanoparticles showed an initial burst release, attributed to the drug amount located at the nanoparticles surface or close to it, followed by a steadily and controlled release. This is corroborated by computational analysis that reveals that PTX attaches effectively to Fe-BTC building blocks, but its relatively large size limits diffusion through crystalline regions of Fe-BTC. The dissolution behaviour can be described through a bimodal diffusivity model. The nanoparticles studied could serve as potential chemotherapeutic candidates for PTX delivery.

Characterization, Stability Assessment, Antioxidant Evaluation and Cell Proliferation Activity of Virgin Coconut Oil-based Nanostructured Lipid Carrier Loaded with Ficus deltoidea Extract

In this study, the Ficus deltoidea extract loaded nanostructured lipid carrier was prepared by using the melt emulsification homogenization method. Virgin coconut oil is used as liquid lipid, while glyceryl monostearate is the solid lipid. Particle size, zeta potential, entrapment efficiency, drug loading and morphology of the obtained nanostructured lipid carrier (NLC) were measured. The size of the nanostructured lipid carrier incorporated with Ficus deltoidea (FDNLC) is 158.0 ± 1.3 nm, with a polydispersity index of 0.15 ± 0.02. The zeta potential obtained is −42.3 ± 1.5 mV. The encapsulation efficiency and active ingredient loading capacity for FDNLC is 87.4% ± 1.3% and 8.5% ± 1.2%, respectively. The shape of FDNLC is almost spherical and the stability assessment showed that the obtained formulation is at least stable for 40 days. When compared with the positive controls, which are Trolox and ascorbic acid, FDNLC shows the highest antioxidant value. Cell proliferation activity study indicates that FDNLC is not toxic to cells, and FDNLC could potentially treat damage by ultraviolet B (UVB) irradiation.

Glycopolymer ornamented octa-arm POSS based organic-inorganic hybrid star block copolymer as a lectin binding ligand

In this study, a polyhedral oligomeric silsesquioxane-polycaprolactone (POSS-PCL)-cored octa-arm star-shaped glyco block copolymer (BCP), poly(ε-caprolactone)-b-poly(glucopyranose) (Star-POSS-PCL-b-PGlc) was successfully synthesized via the combination of ring opening polymerization (ROP) and MADIX (macromolecular design by interchange of xanthate) polymerization technique. Herein, initially octa(3-hydroxy-3-methylbutyl dimethylsiloxy) POSS (Star-POSS) was utilized to initiate the ROP of the ε-caprolactone to get octa-arm star-shaped Star-POSS-PCL. A successive bromination followed by xanthation of the synthesized Star-POSS-PCL polymer allowed us to further polymerize 3-O-acryloyl-1,2:5,6-di-O-isopropylidene-α-D-glucofuranose (AIpGlc) via MADIX polymerization. Formation of the star-shaped block copolymer (BCP) was characterized using ¹H NMR, FT-IR and DSC analyses. The morphology and the aqueous solution behavior of the Star-POSS-PCL-b-PGlc were analyzed using FESEM, HRTEM and DLS analyses, respectively. The lectin-binding efficiency of the star-shaped BCP having different glycopolymer block length was studied using turbidimetry assay and fluorescence quenching titration (FQT) using photoluminescence spectroscopy (PL). Here, FITC labeled concanavalin A (FITC-Con A) was used as a model lectin. The cytotoxicity study of the star-shaped BCPs over the human fibroblast cells revealed the non-toxic nature of the BCPs which open up its great potential towards drug delivery vector.

Naringin-loaded polymeric micelles as buccal tablets: formulation, characterization, in vitro release, cytotoxicity and histopathology studies

Naringin (NG) has been proved to have numerous notable biological effects, including anti-inflammatory effect, anti-cancer effect, and anti-ulcer effect, yet there are no clinical preparations of naringin due to its poor solubility and low dissolution rate after oral administration. In this study, in order to overcome these problems, NG was encapsulated into MPEG-PCL micelles (NGMs) by using a thin-film hydration method. NMGs were in a typical core-shell structure, with a mall particle size (23.95 ± 0.51 nm), high drug loading, and encapsulation efficiency. In vitro release of NGMs indicated that the dissolution of NG was increased after being encapsulated in the micelles. NGMs were nontoxic in the cytotoxicity and histopathology studies. Furthermore, when the freeze-dried NGMs were compressed into buccal tablets (NGBTs) by direct compression, the release speed of NG under simulated oral cavity condition from NGBTs was higher than the control tablets, with the accumulated dissolution at 93.13% in 8 hours. In conclusion, NGMs and NGBTs represent a promising drug delivery system for NG, which has the potential to improve the current treatment of oral diseases.

Encapsulation of a Ru(η6-p-cymene) complex of the antibacterial drug trimethoprim into a polydiacetylene-phospholipid assembly to enhance its in vitro anticancer and antibacterial activities

The first report of a Ru(arene)–liposome nanoaggregate to enhance the in vitro anticancer activity of a Ru–arene complex in liver cancer cells.

Degradation and in vivo evaluation of polycaprolactone, poly(ε-caprolactone-co-L-lactide), and poly-L-lactic acid as scaffold sealant polymers for murine tissue-engineered vascular grafts

Aim: This study evaluates scaffold degradation and neotissue formation as a function of sealant polymer composition in tissue-engineered vascular grafts (TEVGs). Materials & methods: Scaffolds fabricated from polyglycolic acid core and sealant composed of polycaprolactone (PCL), poly-L-lactic-acid (PLLA) or 50:50 copolymer poly(ε-caprolactone-co-L-lactide) (PCLA) were analyzed in vitro using accelerated degradation and scanning electron microscopy, and in vivo following implantation in a murine inferior vena cava interposition model. Results: In vitro and in vivo characterization revealed statistically greater degradation of PCLA compared with both PCL and PLLA scaffolds, with similar neotissue formation across all groups. The wall thickness of PLLA TEVGs was statistically greater than PCL TEVGs at 2 weeks postimplant. Conclusion: Results of this study can be used to inform the rational design of future TEVGs.

Fabrication of redox-responsive Bi(mPEG-PLGA)-Se2 micelles for doxorubicin delivery

Stimuli-responsive polymeric nanostructures have emerged as potential drug carriers for cancer therapy. Herein, we synthesized redox-responsive diselenide bond containing amphiphilic polymer, Bi(mPEG-PLGA)-Se₂ from mPEG-PLGA and 3,3'-diselanediyldipropanoic acid (DSeDPA) using DCC/DMAP as coupling agents. Due to its amphiphilic nature, Bi(mPEG-PLGA)-Se₂ self-assembled in to stable micelles in aqueous solution with a hydrodynamic size of 123.9 ± 0.85 nm. The Bi(mPEG-PLGA)-Se₂ micelles exhibited DOX-loading content (DLC) of 6.61 wt% and encapsulation efficiency (EE) of 54.9%. The DOX-loaded Bi(mPEG-PLGA)-Se₂ micelles released 73.94% and 69.54% of their cargo within 72 h upon treatment with 6 mM GSH and 0.1% H₂O₂, respectively, at pH 7.4 and 37 °C. The MTT assay results demonstrated that Bi(mPEG-PLGA)-Se₂ was devoid of any inherent toxicity and the DOX-loaded micelles showed pronounced antitumor activities against HeLa cells, 44.46% of cells were viable at maximum dose of 7.5 µg/mL. The cellular uptake experiment further confirmed the internalization of DOX-loaded Bi(mPEG-PLGA)-Se₂ micelles and endowed redox stimuli triggered drug release in cytosol and nuclei of cancer cells. Overall, the results suggested that the smart, biocompatible Bi(mPEG-PLGA)-Se₂ copolymer could serve as potential drug delivery biomaterial for the controlled release of hydrophobic drugs in cancer cells.

Antiproliferative effects of new magnetic pH-responsive drug delivery system composed of Fe3O4, CaAl layered double hydroxide and levodopa on melanoma cancer cells

In this study, an efficient drug delivery system composed of Fe₃O₄, CaAl layered double hydroxide (LDH) and l-Dopa has been synthesized through hydrogen bonds between l-Dopa and CaAl-LDH encapsulated Fe₃O₄ nanoparticles (Fe₃O₄@CaAl-LDH@l-Dopa). The structural features of Fe₃O₄@CaAl-LDH@l-Dopa were characterized using XRD, SEM, TEM, EDX, FT-IR, VSM, TGA, XPS, zeta potential analysis and BET. All of the characterization techniques show the uniform high surface area core-shell structure with about 120 nm in average size. Also, the obtained results clearly indicate that this drug delivery system possess high potent for adsorption of l-Dopa (52 wt%) and high drug encapsulation efficiency (71%). The amount of l-Dopa release in low pHs (53.8%) which simulates the environment of cancer cells is greater than higher pHs. The in vitro cytotoxic and anticancer activities of Fe₃O₄@CaAl-LDH@l-Dopa were investigated against Mel-Rm Cells Melanoma (NCIt: C3224) using LDH colorimetric assay and differential staining cell death assay. The results showed Fe₃O₄@CaAl-LDH@l-Dopa with a lower concentration of l-Dopa, illustrate a higher cytotoxicity and anticancer activity.

Multimaterial Segmented Fiber Printing for Gradient Tissue Engineering

IMPACT STATEMENT

This study introduces a segmented three-dimensional printing methodology to create multimaterial porous scaffolds with discrete gradients and controlled distribution of compositions. This methodology can be adapted for the preparation of complex, multimaterial scaffolds with hierarchical structures and mechanical integrity useful in tissue engineering.

Crucial successes in drug delivery systems using multivariate chemometric approaches: challenges and opportunities

Applying multivariate chemometric methods for thorough investigation of three processes in drug delivery systems: loading, release and photo-degradation.

Self-assembly of an amphipathic ααβ-tripeptide into cationic spherical particles for intracellular delivery

The development of molecular carriers able to carry molecules directly into the cell is an area of intensive research. Cationic nanoparticles are effective delivery systems for several classes of molecules, such as anticancer agents, oligonucleotides and antibodies. Indeed, a cationic charge on the outer surface allows a rapid cellular uptake together with the possibility of carrying negatively charged molecules. In this work, we studied the self-assembly of an ultra-short ααβ-tripeptide containing an l-Arg-l-Ala sequence and an unnatural fluorine substituted β^2,3-diaryl-amino acid. The presence of the unnatural β^2,3-diaryl-amino acid allowed us to obtain a protease stable sequence. Furthermore, an arginine guanidinium group triggered the formation of spherical assemblies that were able to load small molecules and enter cells. These spherical architectures, thus, represent interesting candidates for the delivery of exogenous entities directly into cells.

The secondary structures of PEG-functionalized random copolymers derived from (R)- and (S)- families of alkyne polycarbodiimides

Macromolecular micelles: a hydrophobic polyamidine backbone surrounded by hydrophilic PEG chains.

A Novel MPEG-PDLLA-PLL Copolymer for Docetaxel Delivery in Breast Cancer Therapy

Satisfactory drug loading capacity and stability are the two main factors that determine the anti-cancer performance. In general, the stability of the micelles is reduced when the drug loading (DL) is increased. Therefore, it was a challenge to have high drug loading capacity and good stability. In this study, we introduced a hydrophilic poly (L-Lysine) (PLL) segment with different molecular-weights into the monomethoxy poly (ethylene glycol)-poly (D, L-lactide) (MPEG-PDLLA) block copolymer to obtain a series of novel triblock MPEG-PDLLA-PLL copolymers. We found that the micelles formed by a specific MPEG2k-PDLLA4k-PLL1k copolymer could encapsulate docetaxel (DTX) with a satisfactory loading capacity of up to 20% (w/w) via the thin film hydration method, while the stability of drug loaded micellar formulation was still as good as that of micelles formed by MPEG2k-PDLLA1.7k with drug loading of 5% (w/w). The results from computer simulation study showed that compared with MPEG2k-PDLLA1.7k, the molecular chain of MPEG2k-PDLLA4k-PLL1k could form a more compact funnel-shaped structure when interacted with DTX. This structure favored keeping DTX encapsulated in the copolymer molecules, which improved the DL and stability of the nano-formulations. The in vitro and in vivo evaluation showed that the DTX loaded MPEG2k-PDLLA4k-PLL1k (DTX/MPEG2k-PDLLA4k-PLL1k) micelles exhibited more efficiency in tumor cell growth inhibition. In conclusion, the MPEG2k-PDLLA4k-PLL1k micelles were much more suitable than MPEG2k-PDLLA1.7k for DTX delivery, and then the novel nano-formulations showed better anti-tumor efficacy in breast cancer therapy.

Novel Approach of Using Near-Infrared Responsive PEGylated Gold Nanorod Coated Poly(l-lactide) Microneedles to Enhance the Antitumor Efficiency of Docetaxel-Loaded MPEG-PDLLA Micelles for Treating an A431 Tumor

The combination of chemotherapy and photothermal therapy (PTT) plays a significant role in synergistic tumor therapy. However, a high dosage of chemotherapy drugs or photothermal agents may cause series side effects. To overcome these challenges, we designed a near-infrared (NIR) responsive PEGylated gold nanorod (GNR-PEG) coated poly(l-lactide) microneedle (PLLA MN) system (GNR-PEG@MN) to enhance antitumor efficiency of docetaxel-loaded MPEG-PDLLA (MPEG-PDLLA-DTX) micelles for treating an A431 tumor. The as-made GNR-PEG@MNs contained only 31.83 ± 1.22 μg of GNR-PEG per patch and exhibited excellent heating efficacy both in vitro and in vivo. Meanwhile, GNR-PEG@MN with the height of 480 μm had good skin insertion ability and was harmless to the skin. On the other hand, GNR-PEG@MN had good heating transfer ability in vivo, and the tumor sites could reach 50 °C within 5 min. In comparison with chemotherapy and PTT alone, the combination of low dosage MPEG-PDLLA-DTX micelles (5 mg/kg) and GNR-PEG@MNs completely eradicated the A431 tumor without recurrence in vivo, demonstrating a remarkable synergetic effect. Hence, GNR-PEG@MN could be a promising carrier to enhance the antitumor effect of MPEG-PDLLA-DTX micelles for treating superficial tumors and is expected to have a great potential in clinical translation for human epidermoid cancer therapy.

Bioreducible cross-linked core polymer micelles enhance in vitro activity of methotrexate in breast cancer cells

PEG-poly(caprolactone) co-polymers with disulfide-linked cores are highly efficient for delivery of the anti-cancer drug methotrexate in vitro.