Assessment of the interaction of Portland cement-based materials with blood and tissue fluids using an animal model

Leaching and cytotoxicity of bismuth oxide in ProRoot MTA - A laboratory investigation

AIM

The present study examined the leaching and cytotoxicity of bismuth from ProRoot MTA and aimed to identify whether bismuth leaching was affected by the cement base and the immersion regime used.

METHODOLOGY

The leaching profile of bismuth was examined from ProRoot MTA and compared with hydroxyapatite containing 20% bismuth oxide as well as hydroxyapatite and tricalcium silicate to investigate whether bismuth release changed depending on the cement base. Bismuth leaching was determined after 30 and 180 days of ageing immersed in Dulbecco's modified Eagle's medium (DMEM) using mass spectroscopy (ICP-MS). The media were either unchanged or regularly replenished. The pH, surface microstructure and phase changes of aged materials were assessed. Wistar rat femoral bone marrow stromal cells (BMSCs) and cutaneous fibroblasts were isolated, cultured and seeded for cell counting (trypan blue live/dead) after exposure to non-aged, 30- and 180-days-aged samples in regularly replenished DMEM. Aged DMEM in contact with materials was also used to culture BMSCs to investigate the effect of material leachates on the cells. Gene expression analysis was also carried out after direct exposure of cells to non-aged materials. Differences between groups were statistically tested at a significance level of 5%.

RESULTS

All materials exhibited alterations after immersion in DMEM and this increased with longer exposure times. The bismuth leached from ProRoot MTA as detected by ICP-MS. Aged ProRoot MTA samples exhibited a black discolouration and surface calcium carbonate deposition. ProRoot MTA influenced cell counts after direct exposure and its 180-days leachates reduced BMSC viability. After direct BMSC contact with non-aged ProRoot MTA an upregulation of metallothionein (MT1 and MT2A) expression and down-regulation of collagen-1a (Col-1a) and bone sialoprotein (BSP) expression was identified.

CONCLUSIONS

Bismuth leaching was observed throughout 180-days observation period from all materials containing bismuth oxide. This negatively influenced cell viability and gene expression associated with bismuth exposure. This is the first study to report that metallothionein gene expression was influenced by exposure to ProRoot MTA.

A critical review of the material properties guiding the clinician's choice of root canal sealers

OBJECTIVES

The introduction of hydraulic cement sealers has increased the popularity of single cone obturation where the chemistry and properties of hydraulic cement sealers are crucial. This article has investigated the materials present on the market by reviewing the chemistry aiming at understanding whether these materials are optimized or have been tested appropriately.

METHODOLOGY

A market search on materials called bioceramic and hydraulic sealers was undertaken. The safety data sheet and manufacturer details for every material were searched and the components were checked. The literature was searched for information about the properties of these materials based on their composition.

RESULTS

The safety data sheets and manufacturer details were imprecise with some manufacturers providing little detail on composition. From the publications reviewed, it is apparent that the materials used clinically are not optimized, and there is little evidence that the material chemistry and presentation aid the clinical technique in any way.

CONCLUSIONS

There has been a rapid increase in materials identifying as bioceramics on the market. These materials have diverse chemistries, and some of the constituents are not declared. This may affect the clinical performance of these materials.

CLINICAL SIGNIFICANCE

Smart materials developed on the clinical need which are appropriately tested are necessary for a paradigm shift in root canal obturation. It is important to use reputable materials that have been adequately researched in clinical practice.

Bismuth release from endodontic materials: in vivo analysis using Wistar rats

Calcium silicate-based materials are used to block the communication between the root canal and the periodontal ligament space. This brings the materials into contact with tissues and the potential for local and systemic elemental release and movement. The aim of the study was to evaluate the elemental release of bismuth from ProRoot MTA in contact with connective tissues after 30 and 180 days as well as any accumulation in peripheral organs using an animal model. Tricalcium silicate and hydroxyapatite containing 20% bismuth oxide (HAp-Bi) were used as controls. The null hypothesis was that bismuth migrates from tricalcium silicate-based materials when associated with silicon. The materials were examined using scanning electron microscopy, energy dispersive spectroscopy (SEM/EDS) and X-ray diffraction prior to implantation as well as using SEM/EDS, micro X-ray fluorescence and Raman spectroscopy after implantation to assess elemental presence in surrounding tissues. Histological analysis was used to evaluate the changes in tissue architecture and inductively coupled plasma mass spectrometry (ICP-MS) was used to investigate the elemental deposition. For the systemic investigation, routine blood analysis was performed and organs were obtained to evaluate the presence of bismuth and silicon using ICP-MS after acid digestion. In the histological analysis of the implantation sites, macrophages and multinucleated giant cells could be observed after 30 days which after 180 days became a chronic infiltrate; although, no major differences were identified in red and white blood cell analyses and biochemical tests. Implantation altered the materials as observed in the Raman analysis and bismuth was detected both locally and within kidney samples after both periods of analysis, indicating the potential for accumulation of bismuth in this organ. Smaller amounts of bismuth than observed in the kidney were also detected in blood, liver and brain for the ProRoot MTA and HAp-Bi after 180 days. Bismuth was released from the ProRoot MTA locally and was detected systemically and in samples without silicon; thus, the null hypothesis was rejected. The bismuth release demonstrated that this element accumulated both locally and systemically, mainly in the kidneys in comparison with brain and liver regardless of the material base.

Ex Vivo Osteogenesis Induced by Calcium Silicate-Based Cement Extracts

Calcium silicate-based cements are used in a variety of clinical conditions affecting the pulp tissue, relying on their inductive effect on tissue mineralization. This work aimed to evaluate the biological response of calcium silicate-based cements with distinct properties-the fast-setting Biodentine™ and TotalFill^® BC RRM™ Fast Putty, and the classical slow-setting ProRoot^® MTA, in an ex vivo model of bone development. Briefly, eleven-day-old embryonic chick femurs were cultured for 10 days in organotypic conditions, being exposed to the set cements' eluates and, at the end of the culture period, evaluated for osteogenesis/bone formation by combining microtomographic analysis and histological histomorphometric assessment. ProRoot^® MTA and TotalFill^® extracts presented similar levels of calcium ions, although significantly lower than those released from Biodentine^TM. All extracts increased the osteogenesis/tissue mineralization, assayed by microtomographic (BV/TV) and histomorphometric (% of mineralized area; % of total collagen area, and % of mature collagen area) indexes, although displaying distinct dose-dependent patterns and quantitative values. The fast-setting cements displayed better performance than that of ProRoot^® MTA, with Biodentine^TM presenting the best performance, within the assayed experimental model.

Biocompatibility analysis in subcutaneous tissue and physico-chemical analysis of pre-mixed calcium silicate–based sealers

OBJECTIVES

To evaluate the biocompatibility, physical and chemical properties of three pre-mixed calcium silicate-based sealers and an epoxy resin-based material were assessed. Pre-mixed sealers supposedly obtain water from the root canal moist to hydrate and set.

MATERIALS AND METHODS

Polyethylene tubes were filled with the materials Bio-C Sealer Ion+, Bio-C Sealer, EndoSequence BC Sealer and AH Plus Jet, or left empty and surgically implanted in the subcutaneous tissue of Wistar rats. The animals were euthanised and the tubes and tissue were removed for histological analysis and scanning electron microscopy (SEM) coupled with energy-dispersive spectrometry (EDS). Materials' surface chemical characterisation was assessed using Raman spectroscopy and SEM/EDS. Flow, setting time (in two conditions), solubility, radiopacity and pH were also analysed. ANOVA and Bonferroni correction were performed for comparisons (P < 0.05).

RESULTS

Inflammatory response observed in the tissues subsided from 7 to 30 days. Tungsten migration could be detected in the surrounding tissue following AH Plus Jet implantation. All calcium silicate-based sealers exhibited zirconium oxide (radiopacifier) and tricalcium silicate peaks before and after implantation. All materials exhibited flow values above 17 mm. An approximately tenfold difference was observed between the plaster- and metal-mould setting times of the calcium silicate cements indicating its sensitivity to moist variations and solubility above 8% was also observed for these materials.

CONCLUSIONS

Pre-mixed materials exhibited variable setting time and solubility with a decreasing inflammatory response.

CLINICAL RELEVANCE

The variable moist-dependant setting time with high solubility poses a concern for the clinical use of these pre-mixed sealers.

Can strontium replace calcium in bioactive materials for dental applications?

The substitution of calcium with strontium in bioactive materials has been promising but there has been some concern over the material instability and possible toxicity. The aim of this research was the synthesis and characterization of calcium and strontium substituted bioactive materials and assessment of interactions with local tissues and peripheral elemental migration in an animal model. A bioactive glass, hydroxyapatite and hydraulic calcium silicate with 50% or 100% calcium substitution with strontium were developed and the set materials were characterized immediately after setting and after 30 and 180-days in solution. Following subcutaneous implantation, the local (tissue histology, elemental migration) and systemic effects (elemental deposition after organ digestion) were assessed. The strontium-replaced silicate cements resulted in the synthesis of partially substituted phases and strontium leaching at all-time points. The strontium silicate implanted in the animal model could not be retrieved in over half of the specimens showing the high rate of material digestion. Tissue histology showed that all materials caused inflammation after 30 days of implantation however this subsided and angiogenesis occurred after 180 days. Strontium was not detected in the local tissues or the peripheral organs while all calcium containing materials caused calcium deposition in the kidneys. The tricalcium silicate caused elemental migration of calcium and silicon in the local tissues shown by the elemental mapping but no deposition of calcium was identified in the peripheral organs verified by the assessment of the digested tissues. Strontium can substitute calcium in bioactive materials without adverse local or systemic effects.

Methods for testing solubility of hydraulic calcium silicate cements for root-end filling

Regulatory testing of hydraulic cements used in dentistry and standard test methods for root-end filling materials do not exist. The aim of this study was to identify a simple, reproducible method for testing the solubility of materials that set with water (hydraulic) used as root-end filling materials in dentistry. Commercial and prototype hydraulic cements were characterized by scanning electron microscopy and X-ray diffraction analyses and their solubilities were determined using ISO 6876; 2012 standard, a modified ISO 6876 method with media alternative to water and a new method measuring the percentage mass loss and volume change of materials (micro-CT method) from a single surface exposed to three solutions. The solubility testing was performed by three operators to enable an intra-laboratory comparison. The solubility data obtained from the two commercial and two prototype materials varied depending on the method used, with the ISO 6876 method identifying differences in solubility of the materials (p < 0.05) but when modified with alternative solutions, no differences were found (p > 0.05). The changes in solution thus effected the solubility of the tested materials. Inter-operator differences were observed with the weight changes determined from the new method indicating this method was not robust. The weight and volume assessments using the new method were not solution-dependent. The advantage of the proposed method compared with the ISO standard is its simplicity, enabling a number of tests to be performed on the same set of samples that also more closely mimics the clinical environment.

Biocompatibility of a New Calcium Silicate-Based Root Canal Sealer Mediated via the Modulation of Macrophage Polarization in a Rat Model

(1) Background: The EndoSequence BC Sealer HiFlow (Brasseler, Savannah, GA, USA) has recently been introduced in clinical applications. Thus, the aims of the present study are to determine its biocompatibility in vivo and to examine its ability to drive macrophage polarization in vitro and in vivo. (2) Methods: HiFlow was implanted into rat connective tissue for 7, 30 and 150 days. The microstructures and elemental compositions were determined by scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX). Hematoxylin–eosin, immunofluorescence, RT–qPCR and flow cytometry were used to elucidate the effects on inflammatory responses and macrophage polarization. (3) Results: SEM-EDX revealed the formation of surface hydroxyapatite crystal layers. Histological evaluation showed that HiFlow exhibited long-term biocompatibility because it decreased inflammatory responses and reduced the number of macrophages over time; however, tissue necrosis was observed in all the groups. RT–qPCR verified that HiFlow regulated the expression of inflammatory factors to inhibit the inflammatory response. Immunofluorescence analysis performed on in vivo samples revealed that HiFlow promoted M2-like macrophage polarization, and these results were confirmed by flow cytometry in vitro. (4) Conclusion: After 150 days of investigation, HiFlow was considered biologically acceptable, and the formation of apatite crystal layers and the promotion of M2-like macrophage polarization may contribute to its favorable biocompatibility.

Micro-computed Tomographic Evaluation of the Quality of Root Canal Fillings in Mandibular Molars after Obturation for 54 Months

INTRODUCTION

The present study evaluated the percentage volume of voids in root canals of mandibular molars that had been obturated for 54 months.

METHODS

Thirty extracted human mandibular molars were instrumented and debrided. The teeth were assigned to 3 groups (n = 10) according to the filling technique and sealer used: the single-cone technique using AH Plus sealer (AHS; Dentsply Sirona Endodontics, Tulsa, OK) or EndoSequence BC sealer (BCS; Brasseler USA Dental LLC, Savannah, GA) and the warm vertical compaction technique using AH Plus sealer (AHW). The specimens were stored at 37°C and 100% humidity. Micro-computed tomographic imaging was used to scan each specimen 1 day 54 months after obturation. Data were analyzed using 1-way analysis of variance and the paired t test.

RESULTS

The percentage volume of voids in the teeth 1 day after obturation in the AHS group was higher than in the BCS group and the AHW group (P < .05). After 54 months, the proportion of voids decreased in all groups (P < .05). No significant difference was observed between the AHS group and the BCS group after 54 months. Teeth in the AHW group contained fewer voids than the AHS group (P < .05).

CONCLUSIONS

Voids in root canal filling were reduced 54 months after obturation. The warm vertical compaction technique achieved better root canal filling quality in mandibular molars than the single-cone technique when using AHS after long-term storage at 100% humidity.

Long-term porosity and retreatability of oval-shaped canals obturated using two different methods with a novel tricalcium silicate sealer

OBJECTIVE

To evaluate the percentage volume of voids and gaps in oval-shaped canals obturated using two different methods with a tricalcium silicate-based sealer after short- or long-term storage. The long-term effect of storage on the efficiency of removing filling material was also investigated.

MATERIALS AND METHODS

Forty premolar teeth with oval-shaped canals were instrumented to Reciproc R25 and obturated using single cone obturation (SCO) or warm vertical compaction (WVC) techniques with gutta-percha and HiFlow sealer. The specimens were stored at 100% humidity and 37°C for 2 weeks or 6 months and scanned using micro-computed tomography. Initial retreatment was performed up to a Reciproc R40, and the operating time was recorded. The residual material in the canal received a supplementary procedure using XP-endo Finisher R (XPFR) files. After each retreatment procedure, the specimens were rescanned.

RESULTS

The percentage volume of voids and gaps in the SCO group was higher than that of the WVC group at both 2 weeks and 6 months (P < 0.05). The percentage volume of the filling material removed after initial retreatment and XPFR cleaning was significantly higher in the 6-month group than in the 2-week groups (P < 0.05). The proportion of the residual material decreased significantly when XPFR files were used, compared to the initial retreatment group (P < 0.05) in both storage times.

CONCLUSION

The efficiency of retreatment in the oval-shaped canal was closely related to the storage time rather than the filling technique using a tricalcium silicate sealer. The XPFR instrument proved effective in the removal of the remaining materials from the oval-shaped canal.

CLINICAL RELEVANCE

Obturation of the oval-shaped canal with TSBS using the SCO technique in the coronal area needs to be optimized. The retreatment was less efficacious in freshly filled canals than aged filled canals.

Comparative evaluation of volumetric changes of three different retrograde calcium silicate materials placed under different pH condititions

BACKGROUND

The present study aimed to compare the volumetric changes of three calcium silicate cements after retrofilling and placing under different pH conditions via micro-computed tomography (micro-CT) scan.

METHODS

Forty-two extracted human single-rooted teeth were randomly assigned to three groups according to the retrofilling materials used (Biodentine, Endocem MTA, and ProRoot MTA). Each group was divided into two subgroups according to the setting condition. The teeth in one group were immersed in normal saline for 5 days at room temperature, and the teeth in the other group were immersed in butyric acid (pH = 5.4) for 5 days at room temperature. The volume ratios of the retrofilling material were calculated via micro-CT imaging.

RESULTS

The volume ratios of the Biodentine and Endocem MTA groups were significantly different between the two setting environment, and these groups had significantly lower filled volume ratio (Vf, %) in the acidic environment than in the saline environment (pH = 5.4). Meanwhile, the volume ratio of the ProRoot MTA group did not significantly differ between the two setting environments. All materials under the acidic setting condition had relative radiolucency in the area in contact with the acidic solution.

CONCLUSION

The Vf ratio of the Biodentine and Endocem MTA cements was significantly lower in the acidic environment than in the saline environment. No statistically significant difference was observed in the Vf ratio of ProRoot MTA between the two setting environments.

Colour and chemical stability of bismuth oxide in dental materials with solutions used in routine clinical practice

Bismuth(III) oxide is included as a radio-opacifier in dental materials, including hydraulic silicate cements, the material of choice for several endodontic procedures. It has been implicated in tooth discoloration after contact with endodontic irrigants, in particular NaOCl solution, To date, there has been no work on the chemistry: all reports have been of clinical findings only. The purpose now was to report the reactions leading to colour change from Bi2O3 in contact with solutions used in routine endodontic practice. Ten-gram portions of Bi2O3 were immersed in either water, NaOH, NaCl, NaOCl or HCl solution, either in the dark or exposed to visible light, and samples retrieved at 1, 4, 12 and 24 weeks. After washing, these were exposed to either added CO2 or not, for 1 week while drying, and under the same dark or light conditions. Changes in appearance were monitored by photography and colour measurement, and chemically by X-ray diffraction and Fourier-transform infrared spectroscopy. 24-week material was studied using electron paramagnetic resonance and Raman spectroscopy; NaOCl-treated material was also examined by scanning electron microscopy. With water, NaCl and NaOH, bismuth subcarbonate was formed. With or without added carbon dioxide, discoloration occurred from pale yellow to light brown when exposed to light, and to a lesser extent in the dark, intensifying with time. In contrast, exposure to NaOCl rapidly formed a dark brown-black sodium bismuthate. With HCl, white BiOCl was formed. Bi2O3 is not at all inert in this context as is commonly believed, denying its principle of use. Previously unreported solution-mediated reaction occurs readily even in water and NaCl solution, forming new compounds that discolour. In contact with NaOCl sodium bismuthate is formed; severe darkening occurs rapidly. The reactivity is such that Bi2O3 is not indicated for dental materials and should be withdrawn from use.

In Vivo Molecular Toxicity Profile of Dental Bioceramics in Embryonic Zebrafish ( Danio rerio)

The investigation of the biocompatibility of potential and commercially available dental material is a major challenge in dental science. This study demonstrates that the zebrafish model is a novel in vivo model for investigating the biocompatibility of dental materials. Two commercially available dental materials, mineral trioxide aggregate (MTA) and Biodentine, were assessed for their biocompatibility. The biocompatibility analysis was performed in embryonic zebrafish with the help of standard toxicity assays measuring essential parameters such as survivability and hatching. The mechanistic and comparative analysis of toxicity was performed by oxidative stress analysis by measuring ROS induction and apoptosis in zebrafish exposed to dental materials at different concentrations. The molecular investigation at the protein level was done by a computational approach using in silico molecular docking and pathway analysis. The toxicity analysis showed a significant reduction in hatching and survivability rates along with morphological malformations with an increase in the concentration of exposed materials. ROS and apoptosis assay results revealed a greater biocompatibility of Biodentine as compared to that of MTA which was concentration-dependent. In silico analysis showed the significant role of the tricalcium silicate-protein ( Sod1, tp53, RUNX2B) interaction in an exhibition of toxicity. The study provides a new vision and standard in dental material sciences for assessing the biocompatibility of potential novel and commercially available dental materials.

The Relationship of Surface Characteristics and Antimicrobial Performance of Pulp Capping Materials

INTRODUCTION

Pulp capping materials need to be able to protect the pulp but also bond to the overlying restorative materials. Light-curable pulp capping materials bond better to restorative materials and are easier to place than most water-based cements. The aim of this study was to characterize new light-curable tricalcium silicate-based pulp capping materials and compare their surface and antimicrobial properties with clinically available Theracal (Bisco, Schaumburg, IL) and Biodentine (Septodont, Saint-Maur-des-Fossés, France).

METHODS

The surface characteristics of 3 light-curable pulp capping materials based on a resin and filled with tricalcium silicate and tantalum oxide radiopacifier and Theracal and Biodentine were assessed by scanning electron microscopy, X-ray diffraction, and contact angle measurement. The radiopacity was measured following ISO 6876 standards. The antimicrobial activity was determined by the direct contact test and the antibiofilm activity by the adenosine triphosphate assay and the confocal laser scanning Live/Dead assay (Invitrogen, Eugene, OR) using a polymicrobial culture.

RESULTS

The surface characteristics of the materials varied with the unfilled resin and Biodentine exhibiting a hydrophobic surface. Biodentine showed significantly higher antimicrobial properties in the direct contact test, but this property was absent in the antibiofilm activity tests. The resins filled with tricalcium silicate and Theracal showed higher antimicrobial activity than Biodentine in the adenosine triphosphate and live/dead assays.

CONCLUSIONS

The surface characteristics of a material affect its antimicrobial properties. The experimental resin-modified materials exhibited comparable antimicrobial properties with other light-curable pulp capping agents. Further long-term studies on the materials' antimicrobial activity are required to assess whether they can result in better clinical outcomes.

Interfacial Characteristics and Cytocompatibility of Hydraulic Sealer Cements

INTRODUCTION

The stability and long-term success of root canal obturation depends on the choice of sealer because the sealer bonds to the dentin and stabilizes the solid cone. Furthermore, the sealer needs to be nontoxic because sealer toxicity will certainly lead to treatment failure. The aim of this study was to assess the sealer-dentin interface of 3 hydraulic root canal sealers and to evaluate their cytocompatibility compared with AH Plus (Dentsply DeTrey GmbH, Konstanz, Germany).

METHODS

Four dental root canal sealers were assessed. AH Plus, MTA Fillapex (Angelus, Londrina, Brazil), BioRoot RCS (Septodont, Saint-Maur-des-Fossés, France), and Endoseal (Maruchi, Wonju-si, Gangwon-do, South Korea) were characterized using scanning electron microscopy and energy-dispersive spectroscopy. The sealer-tooth interface was assessed by confocal microscopy and scanning electron microscopy, and biocompatibility was measured by assessing the cell metabolic function using direct contact assays and alkaline phosphatase activity.

RESULTS

The tricalcium silicate-based sealers presented a different microstructure and elemental composition despite their similar chemistry and classification. BioRoot RCS was free of aluminum, and all sealers presented different radiopacifying elements. The sealer penetration in the dentinal tubules and interfacial characteristics were different. The migration of silicon was evident from sealer to tooth for all sealers containing tricalcium silicate. MTA Fillapex and BioRoot RCS exhibited the best cytocompatibility in both the direct contact test and alkaline phosphatase activity.

CONCLUSIONS

The use of hydraulic calcium silicate-based sealers has introduced a different material type to endodontics. These materials are different than other sealers mostly because of their hydraulic nature and their interaction with the environment. Although the sealers tested had a similar chemistry, their cytocompatibility and bonding mechanisms were diverse.

Influence of environment on testing of hydraulic sealers

In vitro material testing is undertaken by conducting a series of tests following procedures outlined in international standards. All material properties are measured in water; however biological behavior is undertaken in alternative media such as Dulbecco’s modified eagle medium (DMEM) or simulated body fluid. The aim of this study was to characterize four dental root canal sealers and study their properties in different media. Four dental root canal sealers were assessed. They were characterized by a combination of techniques and the sealer properties were tested as specified by ISO 6876 (2012) and also in alternative media. The sealer biocompatibility was measured by cell function and proliferation assays of elutions. All sealers complied with ISO specifications. The material properties were effected by the type of soaking medium used and the surface micromorphology and elemental composition were dependent on the soaking solution type. Both BioRoot and MTA Fillapex showed cytotoxicity which reduced at higher dilutions. The material chemistry, presentation, environmental conditions and testing methodology used affected the sealer properties. Standards specific to sealer type are thus indicated. Furthermore the methodology used in the standard testing should be more relevant to clinical situations.

Long-term Success of Nonvital, Immature Permanent Incisors Treated With a Mineral Trioxide Aggregate Plug and Adhesive Restorations: A Case Series from a Private Endodontic Practice

This case series evaluated the long-term clinical outcome of nonvital immature teeth treated with mineral trioxide aggregate (MTA) as an apical barrier and an adhesive restoration with or without a fiber post. Eighty-three teeth in 72 patients were treated by the first author with an apical MTA plug and an adhesive restoration of composite resin and in 45 of the 83 teeth 1 or more fiber posts. All of the patients had been referred to the first author's private endodontic practice with at least 1 immature tooth with signs of pulpal necrosis and subsequent apical periodontitis that had been caused by a variety of traumatic dental injuries. Three teeth presented had dens invaginatus. Of 83 teeth, 69 teeth in 60 patients were available for follow-up after 5 to 15 years (recall rate = 83%). The mean follow-up time was 8.29 years. No teeth were lost because of a root fracture. Ninety-six percent (66/69) of the recalled teeth were characterized as healed. Based on periapical radiographs and clinical examination, 96% of teeth treated with the MTA barrier technique and adhesive restorations were characterized as "healed" and were in function after 5 to 15 years (mean = 8.29 years). These results indicate that this is a viable and predictable treatment approach for the long-term success of nonvital immature teeth.