Submillimetre Network Formation by Light-induced Hybridization of Zeptomole-level DNA

Plasmon dephasing time and optical field enhancement in a plasmonic nanobowl substrate studied by scanning near-field optical microscopy

Plasmonic substrates have been extensively investigated due to their potential applications in fluorescence microscopy, chemical sensing, and photochemical reactions. The optical properties of the substrate depend on the spatial and temporal features of the plasmon excited. Hence, the ability to directly visualize plasmon dynamics is crucial. In this study, we investigated the spatial and temporal properties of plasmon excitation in a plasmonic nanobowl substrate consisting of a periodic hexagonal array of nanoscale bowl-like structures developed with self-assembly. Near-field transmission imaging revealed that multiple plasmon resonance bands are observed from visible to near-infrared spectral region, and the optical contrast of the image is dependent on the observed band. Near-field two-photon photoluminescence microscopy revealed that the probability of excitation inside each nanoscale bowl-like structure is greater than that in the surrounding area. Near-field time-resolved imaging revealed that the nanobowl substrate exhibited a substantially long plasmon dephasing time, exceeding 12 fs. Based on the spectral features of the near-field and far-field spectra, we found that optically dark plasmon mode is excited by the near-field illumination and only partly contributes to the long dephasing time observed. This fact indicates that the dephasing time is extended by some other mechanism in the periodic substrate. We revealed from this study that the enhanced optical fields induced in the nanobowl structure originate from the photosynergetic effect of the cavity mode and plasmon mode excited.

Light-Induced Condensation of Biofunctional Molecules around Targeted Living Cells to Accelerate Cytosolic Delivery

The light-induced force and convection can be enhanced by the collective effect of electrons (superradiance and red shift) in high-density metallic nanoparticles, leading to macroscopic assembly of target molecules. We here demonstrate application of the light-induced assembly for drug delivery system with enhancement of cell membrane accumulation and penetration of biofunctional molecules including cell-penetrating peptides (CPPs) with superradiance-mediated photothermal convection. For induction of photothermal assembly around targeted living cells in cell culture medium, infrared continuous-wave laser light was focused onto high-density gold-particle-bound glass bottom dishes exhibiting plasmonic superradiance or thin gold-film-coated glass bottom dishes. In this system, the biofunctional molecules can be concentrated around the targeted living cells and internalized into them only by 100 s laser irradiation. Using this simple approach, we successfully achieved enhanced cytosolic release of the CPPs and apoptosis induction using a pro-apoptotic domain with a very low peptide concentration (nM level) by light-induced condensation.

Attogram-level light-induced antigen-antibody binding confined in microflow

The analysis of trace amounts of proteins based on immunoassays and other methods is essential for the early diagnosis of various diseases such as cancer, dementia, and microbial infections. Here, we propose a light-induced acceleration of antigen-antibody reaction of attogram-level proteins at the solid-liquid interface by tuning the laser irradiation area comparable to the microscale confinement geometry for enhancing the collisional probability of target molecules and probe particles with optical force and fluidic pressure. This principle was applied to achieve a 102-fold higher sensitivity and ultrafast specific detection in comparison with conventional protein detection methods (a few hours) by omitting any pretreatment procedures; 47-750 ag of target proteins were detected in 300 nL of sample after 3 minutes of laser irradiation. Our findings can promote the development of proteomics and innovative platforms for high-throughput bio-analyses under the control of a variety of biochemical reactions.

Switching between laser-induced thermophoresis and thermal convection of liquid suspension in a microgap with variable dimension

Phoretic motion of particles along a temperature gradient formed in a fluid, known as thermophoresis, often takes place under the influence of bulk motion caused by thermal convection. In this paper, using a laser heating method, the significance of two competing effects, that is, thermophoresis and thermal convection, for the particle transport in a liquid phase confined in a microgap is investigated experimentally by changing the gap size as a control parameter. It is found that there is a threshold of the gap size, above which the particles tend to accumulate around the heated spot, forming a ring-like particle distribution. On the contrary, if the gap size is below the threshold, the particles are depleted from the heated spot. Switching between these accumulation and depletion modes is expected to develop novel manipulation techniques.

Damage-free light-induced assembly of intestinal bacteria with a bubble-mimetic substrate

Rapid evaluation of functions in densely assembled bacteria is a crucial issue in the efficient study of symbiotic mechanisms. If the interaction between many living microbes can be controlled and accelerated via remote assembly, a cultivation process requiring a few days can be ommitted, thus leading to a reduction in the time needed to analyze the bacterial functions. Here, we show the rapid, damage-free, and extremely dense light-induced assembly of microbes over a submillimeter area with the "bubble-mimetic substrate (BMS)". In particular, we successfully assembled 104-105 cells of lactic acid bacteria (Lactobacillus casei), achieving a survival rate higher than 95% within a few minutes without cultivation process. This type of light-induced assembly on substrates like BMS, with the maintenance of the inherent functions of various biological samples, can pave the way for the development of innovative methods for rapid and highly efficient analysis of functions in a variety of microbes.

Light-induced assembly of living bacteria with honeycomb substrate

Some bacteria are recognized to produce useful substances and electric currents, offering a promising solution to environmental and energy problems. However, applications of high-performance microbial devices require a method to accumulate living bacteria into a higher-density condition in larger substrates. Here, we propose a method for the high-density assembly of bacteria (106 to 107 cells/cm2) with a high survival rate of 80 to 90% using laser-induced convection onto a self-organized honeycomb-like photothermal film. Furthermore, the electricity-producing bacteria can be optically assembled, and the electrical current can be increased by one to two orders of magnitude simply by increasing the number of laser irradiations. This concept can facilitate the development of high-density microbial energy conversion devices and provide new platforms for unconventional environmental technology.

Macroscopically Anisotropic Structures Produced by Light-induced Solvothermal Assembly of Porphyrin Dimers

Porphyrin-based molecules play an important role in natural biological systems such as photosynthetic antennae and haemoglobin. Recent organic chemistry provides artificial porphyrin-based molecules having unique electronic and optical properties, which leads to wide applications in material science. Here, we successfully produced many macroscopically anisotropic structures consisting of porphyrin dimers by light-induced solvothermal assembly with smooth evaporation in a confined volatile organic solvent. Light-induced fluid flow around a bubble on a gold nanofilm generated a sub-millimetre radial assembly of the tens-micrometre-sized petal-like structures. The optical properties of the petal-like structures depend on the relative angle between their growth direction and light polarisation, as confirmed by UV-visible extinction and the Raman scattering spectroscopy analyses, being dramatically different from those of structures obtained by natural drying. Thus, our findings pave the way to the production of structures and polycrystals with unique characteristics from various organic molecules.

Mechanism in External Field-mediated Trapping of Bacteria Sensitive to Nanoscale Surface Chemical Structure

Molecular imprinting technique enables the selective binding of nanoscale target molecules to a polymer film, within which their chemical structure is transcribed. Here, we report the successful production of mixed bacterial imprinted film (BIF) from several food poisoning bacteria by the simultaneous imprinting of their nanoscale surface chemical structures (SCS), and provide highly selective trapping of original micron-scale bacteria used in the production process of mixed BIF even for multiple kinds of bacteria in real samples. Particularly, we reveal the rapid specific identification of E. coli group serotypes (O157:H7 and O26:H11) using an alternating electric field and a quartz crystal microbalance. Furthermore, we have performed the detailed physicochemical analysis of the specific binding of SCS and molecular recognition sites (MRS) based on the dynamic Monte Carlo method under taking into account the electromagnetic interaction. The dielectrophoretic selective trapping greatly depends on change in SCS of bacteria damaged by thermal treatment, ultraviolet irradiation, or antibiotic drugs, which can be well explained by the simulation results. Our results open the avenue for an innovative means of specific and rapid detection of unknown bacteria for food safety and medicine from a nanoscale viewpoint.

Microparticles controllable accumulation, arrangement, and spatial shaping performed by tapered-fiber-based laser-induced convection flow

The ability to arrange cells and/or microparticles into the desired pattern is critical in biological, chemical, and metamaterial studies and other applications. Researchers have developed a variety of patterning techniques, which either have a limited capacity to simultaneously trap massive particles or lack the spatial resolution necessary to manipulate individual particle. Several approaches have been proposed that combine both high spatial selectivity and high throughput simultaneously. However, those methods are complex and difficult to fabricate. In this article, we propose and demonstrate a simple method that combines the laser-induced convection flow and fiber-based optical trapping methods to perform both regular and special spatial shaping arrangement. Essentially, we combine a light field with a large optical intensity gradient distribution and a thermal field with a large temperature gradient distribution to perform the microparticles shaping arrangement. The tapered-fiber-based laser-induced convection flow provides not only the batch manipulation of massive particles, but also the finer manipulation of special one or several particles, which break out the limit of single-fiber-based massive/individual particles photothermal manipulation. The combination technique allows for microparticles quick accumulation, single-layer and multilayer arrangement; special spatial shaping arrangement/adjustment, and microparticles sorting.