Multifunctional Nano-engineered Polymer Surfaces with Enhanced Mechanical Resistance and Superhydrophobicity

Impact of Magnetite Nanowires on In Vitro Hippocampal Neural Networks

Nanomaterials design, synthesis, and characterization are ever-expanding approaches toward developing biodevices or neural interfaces to treat neurological diseases. The ability of nanomaterials features to tune neuronal networks' morphology or functionality is still under study. In this work, we unveil how interfacing mammalian brain cultured neurons and iron oxide nanowires' (NWs) orientation affect neuronal and glial densities and network activity. Iron oxide NWs were synthesized by electrodeposition, fixing the diameter to 100 nm and the length to 1 µm. Scanning electron microscopy, Raman, and contact angle measurements were performed to characterize the NWs' morphology, chemical composition, and hydrophilicity. Hippocampal cultures were seeded on NWs devices, and after 14 days, the cell morphology was studied by immunocytochemistry and confocal microscopy. Live calcium imaging was performed to study neuronal activity. Using random nanowires (R-NWs), higher neuronal and glial cell densities were obtained compared with the control and vertical nanowires (V-NWs), while using V-NWs, more stellate glial cells were found. R-NWs produced a reduction in neuronal activity, while V-NWs increased the neuronal network activity, possibly due to a higher neuronal maturity and a lower number of GABAergic neurons, respectively. These results highlight the potential of NWs manipulations to design ad hoc regenerative interfaces.

Plastic deformation of synthetic quartz nanopillars by nanoindentation for multi-scale and multi-level security artefact metrics

Individual authentication using artefact metrics has received increasing attention, as greater importance has been placed on the security of individual information. These artefact metrics must satisfy the requirements of individuality, measurement stability, durability, and clone resistance, in addition to possessing unique physical features. In this study, we proposed that nanostructures of synthetic quartz (SQ) deposited on an SQ plate may provide sophisticated artefact metrics if morphological changes could be intentionally introduced into the SQ nanostructures at certain positions. We fabricated SQ nanopillars using a mass-production method (ultraviolet nanoimprint lithography) and investigated their mechanical deformation using nanoindentation with a spheroid diamond tip through a loading and unloading cycle. The SQ nanopillars with an aspect ratio of 1 (i.e., diameters D of 100 and 200 nm with corresponding heights H of 100 and 200 nm, respectively) could be plastically deformed without collapsing within a specified pillar-array format at programmed positions. The plastically deformed SQ nanopillar arrays demonstrated multi-scale (sub-millimetre, micrometre, and nanometre) and multi-level (shape, area, diameter, and height) individuality authentication and clone resistance. Because SQ is physically and chemically stable and durable, individuality authentication can be a highly reliable tool on Earth and in space.

Multifunctional superhydrophobic surfaces

Surface wetting has a significant influence on the performance and applications of the materials. The superhydrophobic surfaces have water repellency due to low surface energy chemistry and micro/nanostructure roughness. The amazing applications of superhydrophobic surfaces (SHSs) lead to increase attention to superhydrophobicity in recent decades. The SHSs have been fabricated through chemical and physical methods. The further properties of SHSs as functions such as self-healing, anti-bacterial, anti-fouling, and stimuli-responsiveness are considered as the functions of the SHSs. The Multifunctional SHSs (MSHSs) that contained superhydrophobicity and at least two other properties as the next generation of the SHSs are swiftly developed in recent years. The multiple applications of the MSHSs are originated from specific morphology and functional groups of the MSHSs. The functions (properties) of the MSHSs are categorized into three groups including self-cleaning properties, restrictive properties, and smart properties. Designing and keeping surface structure plays a significant role in fabricating durable MSHSs. However, there is a big challenge to design and also scale up mechanochemical durable MSHSs. Based on state-of-the-art investigations, establishing a self-healing function can improve the durability of SHSs. The durable self-healing MSHSs can enhance the performance of the other functions and lifespan of the surface. In this review, all surface structures and superhydrophobic agents in MSHSs are investigated. The perspective of the MSHSs determined the next generation of the MSHSs have several significant parameters including durability, stability, more functions, more responsiveness, and environmentally friendly features for fabricating the large-scale MSHSs and enhancing their applications.

3D Porous Graphene Based Aerogel for Electromagnetic Applications

Lightweight multifunctional electromagnetic (EM) absorbing materials with outstanding thermal properties, chemical resistance and mechanical stability are crucial for space, aerospace and electronic devices and packaging. Therefore, 3D porous graphene aerogels are attracting ever growing interest. In this paper we present a cost effective lightweight 3D porous graphene-based aerogel for EM wave absorption, constituted by a poly vinylidene fluoride (PVDF) polymer matrix filled with graphene nanoplatelets (GNPs) and we show that the thermal, electrical, mechanical properties of the aerogel can be tuned through the proper selection of the processing temperature, controlled either at 65 °C or 85 °C. The produced GNP-filled aerogels are characterized by exceptional EM properties, allowing the production of absorbers with 9.2 GHz and 6.4 GHz qualified bandwidths with reflection coefficients below −10 dB and −20 dB, respectively. Moreover, such aerogels show exceptional thermal conductivities without any appreciable volume change after temperature variations. Finally, depending on the process parameters, it is shown the possibility to obtain water repellent aerogel composites, thus preventing their EM and thermal properties from being affected by environmental humidity and allowing the realization of EM absorber with a stable response.

Shielding Effectiveness Study of Barium Hexaferrite-Incorporated, β-Phase-Improved Poly(vinylidene fluoride) Composite Film: A Metamaterial Useful for the Reduction of Electromagnetic Pollution

The present work reports the high electromagnetic interference (EMI) shielding effectiveness of ∼-93.5 dB at 8.63 GHz and -97.6 dB at 8.61 GHz in the X- and K_u-bands for 10 and 20 wt % of barium hexaferrite (BaH) nanoparticle-loaded poly(vinylidene fluoride) (PVDF)-based composite films with a thickness of ∼0.210 and 0.260 mm, respectively. BaH-PVDF composite films with a layer structure have been considered in the present report in order to establish an excellent EMI shielding material for the suppression of electromagnetic pollution, with good control on flexibility, surface area, and thickness. Structural and morphological measurements reveal that the polar β-phase crystallization of the BaH-PVDF composite films has been enhanced in comparison to the pure PVDF film, and these measurements also reveal the influence of BaH nanoparticles on structural alteration from nonpolar α-phase to the polar/electroactive β-phase of the PVDF matrix. The resultant BaH-PVDF composite films produce multiple interfaces between magnetic BaH nanoparticles and β-phase-enriched electroactive PVDF, which plays the most significant role for the enhancement of the EMI shielding effectiveness (SE) in the microwave/GHz frequency range. This high value of the EMI SE with >99.999999999% attenuation has not been found so far in the PVDF-based composite materials by anyone else. This particular feature of BaH-PVDF composite materials suggests that the BaH-PVDF composite films can be considered as the most useful ones for the fabrication of lightweight, flexible, and thickness-controlled EMI shielding materials for the reduction of pollution created by the electromagnetic waves in the microwave/GHz frequency region.

Replication of Mesoscale Pore One-dimensional Nanostructures: Surface-induced Phase Separation of Polystyrene/Poly(vinyl alcohol) (PS/PVA) Blends

Mesoscale pore one-dimensional (1D) nanostructures, or vertically aligned porous nanostructures (VAPNs), have attracted attention with their excellent hydrophobic properties, ultra-high surface area, and high friction coefficient, compared to conventional vertically aligned nanostructures (VANs). In this study, we investigate the replication of VAPNs produced by the thermal nanoimprint process using anodic aluminum oxide (AAO2) templates (100 nm diameter). Polystyrene/poly(vinyl alcohol) (PS1/PVA) blends, prepared by the advanced melt-mixing process with an ultra-high shear rate, are used to investigate the formation of porosity at the nanometer scale. The results reveal that domain size and mass ratios of PVA precursors in the PS matrix play a dominant role in the interfacial interaction behavior between PS1-PVA-AAO2, on the obtained morphologies of the imprinted nanostructures. With a PVA nanodomain precursor (PS1/PVA 90/10 wt%), the integration of PVA nanodroplets on the AAO2 wall due to the hydrogen bonding that induces the phase separation between PS1-PVA results in the formation of VAPNs after removal of the PVA segment. However, in the case of PVA microdomain precursors (PS1/PVA 70/30 wt%), the structure transformation behavior of PS1 is induced by the Rayleigh instability between PVA encapsulated around the PS1 surfaces, resulting in the PS1 nanocolumns transforming into nanopeapods composed of nanorods and nanospheres.

Single-imprint moth-eye anti-reflective and self-cleaning film with enhanced resistance

Antireflective transparent materials are essential for a myriad of applications to allow for clear vision and efficient light transmission. Despite the advances, efficient and low cost solutions to clean antireflective surfaces have remained elusive. Here, we present a practical approach that enables the production of antireflective polymer surfaces based on moth-eye inspired features incorporating photoinduced self-cleaning properties and enhanced mechanical resistance. The methodology involves the fabrication of sub-wavelength moth-eye nanofeatures onto transparent surface composite films in a combined processing step of nanoparticle coating and surface nanoimprinting. The resulting surfaces reduced the optical reflection losses from values of 9% of typical PMMA plastic films to an optimum value of 0.6% in the case of double-sided moth-eye nanoimprinted films. The composite moth-eye topography also showed an improved stiffness and scratch resistance. This technology represents a significant advancement not limited by scale, for the development of antireflective films for low cost application products.