3D Flower-like β-MnO2/Reduced Graphene Oxide Nanocomposites for Catalytic Ozonation of Dichloroacetic Acid

Development, dilemma and potential strategies for the application of nanocatalysts in wastewater catalytic ozonation: A review

With the continuous development of nanomaterials in recent years, the application of nanocatalysts in catalytic ozone oxidation has attracted more and more researchers' attention due to their excellent catalytic properties. In this review, we systematically summarized the current research status of nanocatalysts mainly involving material categories, mechanisms and catalytic efficiency. Based on summary and analysis, we found most of the reported nanocatalysts were in the stage of laboratory research, which was caused by the nanocatalysts defects such as easy aggregation, difficult separation, and easy leakage. These defects might result in severe resource waste, economic loss and potentially adverse effects imposed on the ecosystem and human health. Aiming at solving these defects, we further analyzed the reasons and the existing reports, and revealed that coupling nano-catalyst and membrane, supported nanocatalysts and magnetic nanocatalysts had promising potential in solving these problems and promoting the actual application of nanocatalysts in wastewater treatment. Furthermore, the advantages, shortages and our perspectives of these methods are summarized and discussed.

Synergistic catalysis of ozonation and photooxidation by sandwich structured MnO2-NH2/GO/p-C3N4 on cephalexin degradation

Antibiotics such as cephalexin (CLX) are often detected in water and sewage, and advanced oxidation processes (AOPs) are usually the most effective method to degrade them. Currently, the synergy of AOPs has raised lively interest in water and wastewater treatment. Here the sandwiched catalyst of MnO₂-NH₂/GO/p-C₃N₄ (MN/GO/CN) is synthesized, in which graphene oxide (GO) acts as "core layer" connecting aminated MnO₂ (MnO₂-NH₂) for catalytic ozonation and proton-functionalized g-C₃N₄ (p-C₃N₄) for photocatalysis. The MN/GO/CN combines the AOPs of catalytic ozonation and photocatalysis, initiates hydroxyl radicals 4.2 times the sum of catalytic ozonation and photocatalysis, and achieves the first order kinetics constant of 2.4 × 10^-2/s, which is 2.7, 8.1 and 20.1 times that of catalytic ozonation, photo ozonation, and photocatalysis, respectively, and consequently reduces CLX from 1.0 mg/L to below the detection limit within 2.5 min, demonstrating the strong synergism between the AOPs. The sandwich structure enables GO to mediate the electron transfer between p-C₃N₄ and MnO₂-NH₂, which not only hinders electron-hole recombination on p-C₃N₄, but also speeds redox electron cycle on MnO₂ to promote the catalytic activity. The simultaneous catalytic ozonation and photocatalysis by sandwiched bifunctional catalyst to obtain synergistic effect will find its broad prospect in water and wastewater treatment.

Two-dimensional layered carbon-based catalytic ozonation for water purification: Rational design of catalysts and an in-depth understanding of the interfacial reaction mechanism

This review renewed insight into the existing complex and contradictory mechanisms of catalytic ozonation by two-dimensional layered carbon-based materials (2D-LCMs) for degradation toxic refractory organics in aqueous solution. Migration and capture of active electrons are central to catalytic ozonation reactions, which was not studied or reviewed more clearly. Based on this perspective, the catalytic ozonation potential of 2D-LCMs synthesized by numerous methods is firstly contrasted to guide the design of subsequent carbon based-catalysts, and not limited to 2D-LCMs. Matching ROS to active sites is a key step in understanding the catalytic mechanism. The structure-activity relationships between reported numerous active sites and ROS evolution is then constructed. Result showed that OH could be produced by -OH, -C=O, -COOH groups, defective sites, immobilized metal atoms, doped heteroatoms and photo-induced electrons; and O₂^- could be produced by -OH groups and sp²-bonded carbon. The normalized model further be used to visually compare the contribution degree of various regulatory methods to performance improvement. More importantly, this review calls for 2D-LCMs-based catalytic ozonation to be studied without circumventing the issue of structural stability, which would lead to many proposals of catalysts and its involved catalytic reaction mechanism being meaningless.

The Role of Catalytic Ozonation Processes on the Elimination of DBPs and Their Precursors in Drinking Water Treatment

Formation of disinfection byproducts (DBPs) in drinking water treatment (DWT) as a result of pathogen removal has always been an issue of special attention in the preparation of safe water. DBPs are formed by the action of oxidant-disinfectant chemicals, mainly chlorine derivatives (chlorine, hypochlorous acid, chloramines, etc.), that react with natural organic matter (NOM), mainly humic substances. DBPs are usually refractory to oxidation, mainly due to the presence of halogen compounds so that advanced oxidation processes (AOPs) are a recommended option to deal with their removal. In this work, the application of catalytic ozonation processes (with and without the simultaneous presence of radiation), moderately recent AOPs, for the removal of humic substances (NOM), also called DBPs precursors, and DBPs themselves is reviewed. First, a short history about the use of disinfectants in DWT, DBPs formation discovery and alternative oxidants used is presented. Then, sections are dedicated to conventional AOPs applied to remove DBPs and their precursors to finalize with the description of principal research achievements found in the literature about application of catalytic ozonation processes. In this sense, aspects such as operating conditions, reactors used, radiation sources applied in their case, kinetics and mechanisms are reviewed.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

In situ construction of hybrid MnO2@GO heterostructures for enhanced visible light photocatalytic, anti-inflammatory and anti-oxidant activity

Hybrid MnO₂@GO heterostructure nano-composites with enhanced visible light photocatalytic, anti-oxidant and anti-inflammatory activity.