Mixed Molybdenum Oxides with Superior Performances as an Advanced Anode Material for Lithium-Ion Batteries

Catalytic Hydrotreating of Crude Pongamia pinnata Oil to Bio-Hydrogenated Diesel over Sulfided NiMo Catalyst

This work studied the catalytic activity and stability of Ni-MoS2 supported on γ-Al2O3, SiO2, and TiO2 toward deoxygenation of different feedstocks, i.e., crude Pongamia pinnata oil (PPO) and refined palm olein (RPO). PPO was used as a renewable feedstock for bio-hydrogenated diesel production via catalytic hydrotreating under a temperature of 330 °C, H2 pressure of 50 bar, WHSV of 1.5 h−1, and H2/oil (v/v) of 1000 cm3/cm3 under continuous operation. The oil yield from a Soxhlet extraction of PPO was up to 26 wt.% on a dry basis, mainly consisting of C18 fatty acids. The catalytic activity in terms of conversion and diesel yield was in the same trend as increasing in the order of NiMo/γ-Al2O3 > NiMo/TiO2 > NiMo/SiO2. The hydrodeoxygenation (HDO) activity was more favorable over the sulfided NiMo supported on γ-Al2O3 and TiO2, while a high DCO was observed over the sulfided NiMo/SiO2 catalyst, which related to the properties of the support material and the intensity of metal–support interaction. The deactivation of NiMo/SiO2 and NiMo/TiO2 occurred in a short period, due to the phosphorus and alkali impurities in PPO which were not found in the case of RPO. NiMo/γ-Al2O3 exhibited the high resistance of impure feedstock with excellent stability. This indicates that the catalytic performance is influenced by the purity of the feedstock as well as the characteristics of the catalysts.

La2MoO6 as an Effective Catalyst for the Cathode Reactions of Lithium-Sulfur Batteries

Lithium-sulfur batteries with high theoretical energy density have emerged as one of the most promising next-generation rechargeable batteries, while their discharge capacity and cycle stability are challenges mainly due to the shuttle effect of polysulfide intermediates. Employing an effective catalyst for the conversion of polysulfides in cathode reactions can promote the reaction kinetics to restrain the shuttle of polysulfides. Here, for the first time, La₂MoO₆ (LMO) as a catalyst is introduced into sulfur cathodes. To investigate the effect of La₂MoO₆, we prepare two different structures of La₂MoO₆/carbon nanofiber composites. One is carbon nanofiber-supported crystalline La₂MoO₆ nanoparticles (LMO@CNFs) and the other is amorphous La₂MoO₆ nanoparticles embedded in carbon nanofibers (LMO-in-CNFs). For sulfur electrodes with ∼73 wt % sulfur loading, LMO@CNFs/S and LMO-in-CNFs/S deliver initial gravimetric capacities of 1493.4 and 1246.7 mA h g^-1, respectively, at a 0.1C rate, obviously higher than that of the control sample CNFs/S. Moreover, LMO@CNFs/S shows much better rate performance than LMO-in-CNFs/S, indicating strongly that La₂MoO₆ is a highly effective catalyst to promote kinetic conversion of polysulfides.

Nanostructured Molybdenum-Oxide Anodes for Lithium-Ion Batteries: An Outstanding Increase in Capacity

This work aimed at synthesizing MoO₃ and MoO₂ by a facile and cost-effective method using extract of orange peel as a biological chelating and reducing agent for ammonium molybdate. Calcination of the precursor in air at 450 °C yielded the stochiometric MoO₃ phase, while calcination in vacuum produced the reduced form MoO₂ as evidenced by X-ray powder diffraction, Raman scattering spectroscopy, and X-ray photoelectron spectroscopy results. Scanning and transmission electron microscopy images showed different morphologies and sizes of MoO_x particles. MoO₃ formed platelet particles that were larger than those observed for MoO₂. MoO₃ showed stable thermal behavior until approximately 800 °C, whereas MoO₂ showed weight gain at approximately 400 °C due to the fact of re-oxidation and oxygen uptake and, hence, conversion to stoichiometric MoO₃. Electrochemically, traditional performance was observed for MoO₃, which exhibited a high initial capacity with steady and continuous capacity fading upon cycling. On the contrary, MoO₂ showed completely different electrochemical behavior with less initial capacity but an outstanding increase in capacity upon cycling, which reached 1600 mAh g^-1 after 800 cycles. This outstanding electrochemical performance of MoO₂ may be attributed to its higher surface area and better electrical conductivity as observed in surface area and impedance investigations.

Synthesis of a full range Fe-doped ZnFexCo2-xO4 and its application as anode material for lithium-ion battery

Fe-Doped ZnFe_xCo_2-xO₄ (x = 0.00, 0.17, 0.33, 0.47, 0.67, 0.87, 1.17, 1.37, 1.67, 1.87, 2.00) compounds were prepared by a sol-gel method. X-ray diffraction measurements show that Fe-doping does not change the crystal structure of ZnCo₂O₄ and dopant Fe successfully occupies the 16c Co site. Because of the bigger radius of the doping ion, the cell parameters and cell volumes of ZnFe_xCo_2-xO₄ compounds present an obvious linear increase with increasing Fe content. In addition, attributed to the similar crystal structures for ZnFe₂O₄ and ZnCo₂O₄, a full range (0 ≤ x ≤ 2) of ZnFe_xCo_2-xO₄ solid solution phases was obtained. V/I measurement results show that a small Fe doping content obviously improved the electronic conductivity of the sample. In addition, due to the smaller particles size and uniform particle distribution caused by Fe doping, the lithium ion diffusion coefficient of the sample was increased by 2 orders of magnitude. Based on the improved electronic conductivity combined with the significantly increased lithium-ion diffusion coefficient, a sample with Fe doping content of x = 0.33, ZnFe_0.33Co_1.67O₄, presents a high reversible specific capacity and excellent rate cycle stability. At a rate of 100 mA g^-1, a relatively high discharge capacity of 850 mA h g^-1 can still be obtained after 100 cycles, which is obviously higher than that of pure ZnCo₂O₄ (only 295 mA h g^-1). Even at a higher discharge rate of 500 mA g^-1, a discharge capacity of 450 mA h g^-1 with a capacity retention of nearly 100% was obtained. Based on its excellent electrochemical properties, ZnFe_0.33Co_1.67O₄ will be a promising anode material for rechargeable lithium-ion batteries.

A Combined Strategy to Improve the Performance of Dental Alloys Using a New CoCrNbMoZr Alloy with Mn and Si Coated via an Anodic Oxidation Procedure

The aim of the paper is based on a combined approach to improve dental alloy performance using a new Ni-free Co–Cr composition with Mo, Nb and Zr and coated with an anodic oxidation film. The coated and uncoated samples were surface characterized by performing SEM (scanning electronic microscopy), XRD (X-rays diffraction) contact angle measurements and corrosion studies with open circuit potential, potentiodynamic polarization and EIS (impedance electrochemical spectroscopy) procedures. The SEM equipment with an EDX (Energy-dispersive X-ray spectroscopy) module indicated the sample morphology and the XRD investigations established the formation of the oxides. The electrochemical procedures were performed in Ericsson artificial saliva for coated samples in various conditions. Based on all the experiments, including the decrease in the hydrophobic character of the uncoated samples and the decrease in the hydrophilic values of the anodized alloys, the improved performance of the coated samples was established as a conclusion.

In Operando X-ray Studies of High-Performance Lithium-Ion Storage in Keplerate-Type Polyoxometalate Anodes

Polyoxometalates (POMs) have emerged as potential anode materials for lithium-ion batteries (LIBs) owing to their ability to transfer multiple electrons. Although POM anode materials exhibit notable results in LIBs, their energy-storage mechanisms have not been well-investigated. Here, we utilize various in operando and ex situ techniques to verify the charge-storage mechanisms of a Keplerate-type POM Na₂K₂₃{[(Mo^VI)Mo^VI₅O₂₁(H₂O)₃(KSO₄)]₁₂ [(V^IVO)₃₀(H₂O)₂₀(SO₄)_0.5]}·ca200H₂O ({Mo₇₂V₃₀}) anode in LIBs. The {Mo₇₂V₃₀} anode provides a high reversible capacity of up to ∼1300 mA h g^-1 without capacity fading for up to 100 cycles. The lithium-ion storage mechanism was studied systematically through in operando synchrotron X-ray absorption near-edge structure, ex situ X-ray diffraction, ex situ extended X-ray absorption fine structure, ex situ transmission electron microscopy, in operando synchrotron transmission X-ray microscopy, and in operando Raman spectroscopy. Based on the abovementioned results, we propose that the open hollow-ball structure of the {Mo₇₂V₃₀} molecular cluster serves as an electron/ion sponge that can store a large number of lithium ions and electrons reversibly via multiple and reversible redox reactions (Mo⁶⁺ ↔ Mo¹⁺ and V⁵⁺/V⁴⁺↔ V¹⁺) with fast lithium diffusion kinetics (D_Li⁺: 10^-9-10^-10 cm² s^-1). No obvious volumetric expansion of the microsized {Mo₇₂V₃₀} particle is observed during the lithiation/delithiation process, which leads to high cycling stability. This study provides comprehensive analytical methods for understanding the lithium-ion storage mechanism of such complicated POMs, which is important for further studies of POM electrodes in energy-storage applications.

Plasma-liquid synthesis of MoOx and WO3 as potential photocatalysts

Plasmas in contact with liquids represent a green chemistry method for the synthesis of metal oxides. In this work, underwater plasma was used for the synthesis of molybdenum and tungsten oxides. The obtained samples were analyzed by various techniques. Results showed that underwater plasma with Mo electrodes allows obtaining non-stoichiometric molybdenum oxide (MoOx). In the case of tungsten electrodes, monoclinic WO3 was formed. The synthesized oxides have a wide band gap (3.21 eV for MoOx and 3.27 eV for WO3). The photocatalytic and sorption activities of the synthesized oxides towards the decomposition of cationic and anionic dyes (Methylene Blue, Rhodamine B, and Reactive Red 6C) were studied. MoOx shows excellent photocatalytic performance under UV and visible light irradiation. The photocatalytic activity of WO3 under visible light is less than that under UV irradiation.

Molybdenum-Suboxide Thin Films as Anode Layers in Planar Lithium Microbatteries

In this paper, we investigate the effects of operational conditions on structural, electronic and electrochemical properties on molybdenum suboxides (MoO3-δ) thin films. The films are prepared using pulsed-laser deposition by varying the deposition temperature (Ts), laser fluence (Φ), the partial oxygen pressure (PO2) and annealing temperature (Ta). We find that three classes of samples are obtained with different degrees of stoichiometric deviation without post-treatment: (i) amorphous MoO3-δ (δ < 0.05) (ii) nearly-stoichiometric samples (δ ≈ 0) and (iii) suboxides MoO3-δ (δ > 0.05). The suboxide films 0.05 ≤ δ ≤ 0.25 deposited on Au/Ti/SiO2/flexible-Si substrates with appropriate processing conditions show high electrochemical performance as an anode layer for lithium planar microbatteries. In the realm of simple synthesis, the MoO3-δ film deposited at 450 °C under oxygen pressure of 13 Pa is a mixture of α-MoO3 and Mo8O23 phases (15:85). The electrochemical test of the 0.15MoO3-0.85Mo8O23 film shows a specific capacity of 484 µAh cm−2 µm−1 after 100 cycles of charge-discharge at a constant current of 0.5 A cm−2 in the potential range 3.0-0.05 V.

Raman spectroscopy-in situ characterization of reversibly intercalated oxygen vacancies in α-MoO3

This work reports on the in situ strategy to reversibly generate or suppress oxygen vacancies on α-MoO₃ which were probed by Raman spectroscopy. Reversible changes in two features of the α-MoO₃ Raman spectrum could be correlated to the generation of oxygen vacancies: displacement of the T_b band frequency and the intensity decrease of the symmetrical stretching (ν_s) band. These two features could be used to qualitatively describe oxygen vacancies. Raman results also indicate that oxygen vacancies are located in the interlayer region of the α-MoO₃ lattice. This observation is corroborated by in situ X-ray diffraction, which also indicates the absence of nonstoichiometric phase transitions.

This work reports on the in situ strategy to reversibly generate or suppress oxygen vacancies on α-MoO₃ which were probed by Raman spectroscopy.

Synergetic Impact of Secondary Metal Oxides of Cr-M/MCM41 Catalyst Nanoparticles for Ethane Oxidative Dehydrogenation Using Carbon Dioxide

Oxidative dehydrogenation of alkanes to alkenes by a mild oxidant such as carbon dioxide is an active area of research. A series of MCM41-supported bimetallic oxide catalysts containing chromium oxide in addition to metal oxides (Ce, Co, Zn, V, Nb, and Mo) has been prepared. The binary catalysts have Cr metal oxide incorporated into MCM41 structure while the other oxides are either incorporated with Cr or impregnated on the MCM41 surface. The synthesized catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 sorption, scanning electron microscopy (SEM), hydrogen temperature programmed reduction (H2-TPR), and Diffuse reflectance UV–vis spectroscopy (DRS). The catalytic activity of Cr(4)-M(4)/MCM-41 catalysts in the dehydrogenation of ethane with CO2 was investigated. The textural properties of the synthesized samples showed that the addition of the bimetallic oxides did not disturb the mesoporous structure of MCM41 and the prepared catalysts exhibited a high BET surface area; however, the lowest surface area was recorded for Cr(4)-Mo(4)/MCM41 catalyst at 701 m2/g. Among the prepared catalysts, H2-TPR profile of Cr(4)-Ce(4)/MCM41 revealed the increase in the concentration of Cr6+ species which interacted with the framework of siliceous support. On the other hand, H2-TPR profiles of Cr(4)-Co(4)/MCM41 showed wide reduction peaks centered at 400 °C which is ascribed to reduction of Cr6+ to Cr3+ species and Co3O4 to metallic Co. At the same time, Cr(4)-Mo(4)/MCM41 and Cr(4)-V(4)/MCM41 exhibited higher temperature reduction peaks, indicating these two catalysts require higher activation temperatures. The synergy between the Cr with Zn or Nb metals reduced the concentration of Cr6+ species which is reflected in their catalytic performance. Cr(4)-Ce(4)/MCM41 recorded the highest catalytic activity toward ethylene production where the ethane conversion and ethylene yield were 37.9% and 35.1%, respectively.

Amorphous Mo5O14-Type/Carbon Nanocomposite with Enhanced Electrochemical Capability for Lithium-Ion Batteries

An amorphous Mo_mO_3m−1/carbon nanocomposite (m ≈ 5) is fabricated from a citrate–gel precursor heated at moderate temperature (500 °C) in inert (argon) atmosphere. The as-prepared Mo₅O₁₄-type/C material is compared to α-MoO₃ synthesized from the same precursor in air. The morphology and microstructure of the as-prepared samples are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman scattering (RS) spectroscopy. Thermal gravimetry and elemental analysis indicate the presence of 25.8 ± 0.2% of carbon in the composite. The SEM images show that Mo₅O₁₄ is immersed inside a honeycomb-like carbon matrix providing high surface area. The RS spectrum of Mo₅O₁₄/C demonstrates an oxygen deficiency in the molybdenum oxide and the presence of a partially graphitized carbon. Outstanding improvement in electrochemical performance is obtained for the Mo₅O₁₄ encapsulated by carbon in comparison with the carbon-free MoO₃.

Large Scale Process for Low Crystalline MoO₃-Carbon Composite Microspheres Prepared by One-Step Spray Pyrolysis for Anodes in Lithium-Ion Batteries

This paper introduces a large-scale and facile method for synthesizing low crystalline MoO₃/carbon composite microspheres, in which MoO₃ nanocrystals are distributed homogeneously in the amorphous carbon matrix, directly by a one-step spray pyrolysis. The MoO₃/carbon composite microspheres with mean diameters of 0.7 µm were directly formed from one droplet by a series of drying, decomposition, and crystalizing inside the hot-wall reactor within six seconds. The MoO₃/carbon composite microspheres had high specific discharge capacities of 811 mA h g-1 after 100 cycles, even at a high current density of 1.0 A g-1 when applied as anode materials for lithium-ion batteries. The MoO₃/carbon composite microspheres had final discharge capacities of 999, 875, 716, and 467 mA h g-1 at current densities of 0.5, 1.5, 3.0, and 5.0 A g-1, respectively. MoO₃/carbon composite microspheres provide better Li-ion storage than do bare MoO₃ powders because of their high structural stability and electrical conductivity.

Conversion-type Anode Materials for Alkali-Ion Batteries: State of the Art and Possible Research Directions

In this study, the potential of conversion-type anode materials for alkali-ion batteries has been examined and analyzed in terms of the parameters of prime importance for practical alkali-ion systems. Issues like voltage hysteresis, discharge profile, rate stabilities, cyclic stabilities, irreversible capacity loss, and Columbic efficiencies have been specifically addressed and analyzed as the key subjects. Relevant studies on achieving a better performance by addressing one or more of the issues have been carefully selected and outlook has been presented on the basis of this literature. Mechanistic insights into the subject of conversion reactions are discussed in light of the use of recent and advanced techniques like in situ transmission electron microscopy, in operando X-ray diffraction, and X-ray absorption spectroscopy. Three-dimensional plots depicting the performance of different materials, morphologies, and compositions with respect to these parameters are also presented to highlight the systematic of multiparameter dependencies. Inferences are drawn from these plots in the form of a short section at the end, which should be helpful to the readers, especially young researchers. We believe that this study differs from others on the subject in being focused toward addressing the practical limitations and providing possible research directions to achieve the best possible results from conversion-type anode materials.

Fresh MoO2 as a better electrode for pseudocapacitive sodium-ion storage

A freshly prepared MoO₂ anode with dominant pseudocapacitive sodium-ion storage has been developed for high-rate sodium ion batteries.

Graphene-oxide-wrapped ZnMn2O4 as a high performance lithium-ion battery anode

Cation distribution between tetrahedral and octahedral sites within the ZnMn₂O₄ spinel lattice, along with microstructural features, is affected greatly by the temperature of heat treatment. Inversion parameters can easily be tuned, from 5%-19%, depending on the annealing temperature. The upper limit of inversion is found for T = 400 °C as confirmed by x-ray powder diffraction and Raman spectroscopy. Excellent battery behavior is found for samples annealed at lower temperatures; after 500 cycles the specific capacity for as-prepared ZnMn₂O₄ is 909 mAh g^-1, while ZnMn₂O₄ heat-treated at 300 °C is 1179 mAh g^-1, which amounts to 101% of its initial capacity. Despite the excellent performance of a sample processed at 300 °C at lower charge/discharge rates (100 mAh g^-1), a drop in the specific capacity is observed with rate increase. This issue is solved by graphene-oxide wrapping: the specific capacity obtained after the 400th cycle for graphene-oxide-wrapped ZnMn₂O₄ heat-treated at 300 °C is 799 mAh g^-1 at a charge/discharge rate 0.5 A g^-1, which is higher by a factor of 6 compared to samples without graphene -oxide wrapping.