Silver Nanowires Modified with PEDOT: PSS and Graphene for Organic Light-Emitting Diodes Anode

Metal nanowire-based transparent electrode for flexible and stretchable optoelectronic devices

High-quality transparent electrodes are indispensable components of flexible optoelectronic devices as they guarantee sufficient light transparency and electrical conductivity. Compared to commercial indium tin oxide, metal nanowires are considered ideal candidates as flexible transparent electrodes (FTEs) owing to their superior optoelectronic properties, excellent mechanical flexibility, solution treatability, and higher compatibility with semiconductors. However, certain key challenges associated with material preparation and device fabrication remain for the practical application of metal nanowire-based electrodes. In this review, we discuss state-of-the-art solution-processed metal nanowire-based FTEs and their applications in flexible and stretchable optoelectronic devices. Specifically, the important properties of FTEs and a cost-benefit analysis of existing technologies are introduced, followed by a summary of the synthesis strategy, key properties, and fabrication technologies of the nanowires. Subsequently, we explore the applications of metal-nanowire-based FTEs in different optoelectronic devices including solar cells, photodetectors, and light-emitting diodes. Finally, the current status, future challenges, and emerging strategies in this field are presented.

Recent progress in post treatment of silver nanowire electrodes for optoelectronic device applications

Owing to the economical and practical solution synthesis and coating strategies, silver nanowires (AgNWs) have been considered as one of the most suitable alternative materials to replace commercial indium tin oxide (ITO) transparent electrodes. The primitive AgNW electrode cannot meet the requirements for preparing high performance optoelectronic devices due to its high contact resistance, large surface roughness and poor stability. Thus, various post-treatments for AgNW film optimization are needed before its actual applications, such as welding treatment to decrease contact resistance and passivation to increase film stability. This review investigates recent progress on the preparation and optimization of AgNWs. Moreover, some unique fabrication strategies to produce highly oriented AgNW films with unique anisotropic properties have also been carried out with detailed analysis. The representative devices based on the AgNW electrode have been summarized and discussed at the end of this review.

Solution-processed PEDOT:PSS:GO/Ag NWs composite electrode for flexible organic light-emitting diodes

Flexible organic light emitting diodes (OLEDs) have attracted considerable attention for the reason of light weight, high mechanical flexibility in display and lighting. The most widely used transparent anode indium tin oxide (ITO) is unsuitable for flexible OLEDs because of its easy cracking upon bending. In this paper, we proposed a simple two steps solution processing method to fabricate flexible PEDOT:PSS:GO/Ag NWs composite electrodes. The optimized PEDOT:PSS:GO/Ag NWs composite electrode exhibits an optical transmittance of 88.7% at a wavelength of 550 nm and a low sheet resistance of 17 Ω/sq, which arecomparable to that of ITO. With PEDOT:PSS:GO/Ag NWs composite electrodes, the turn on voltage, current density and maximum brightness of OLEDs based on composite electrode were 2.1 V, 6.2 cd/A and 22894 cd/m², respectively, which were superior to that OLED based on ITO anode. The enhanced performance of OLEDs based on composite anode mainly attributed to the lower sheet resistance, smoother surface of the composite anode and the far surface plasma resonance (Far SPR) effect, a lower waveguide optical loss because of the introduction of Ag NWs in the electrode.

High-Performance Flexible Transparent Conductive Films Enabled by a Commonly Used Antireflection Layer

Recently, silver nanowire-based transparent conductive films (AgNW-based TCFs) with excellent comprehensive performance have aroused wide and great interest. However, it is always difficult to simultaneously improve the performances of TCFs in all aspects. In this work, by introducing silica nanoparticles (SiO₂-NPs) with a smaller particle size, several properties of AgNW-based TCFs were optimized successfully. The transmittance and conductivity were improved simultaneously, and smaller particle size was proven to be more suitable to achieve TCFs with excellent optoelectrical properties. Typically, an AgNW/SiO₂-based TCF with a sheet resistance of 250 Ω/sq and transmittance of 93.6% (including the poly (ethylene terephthalate) substrate, abbreviated as PET) could be obtained by using SiO₂-NPs with a size of ∼21 nm, and this transmittance is even higher than that of the bare PET (91.8%) substrate. We demonstrated that the layer formed through self-assembly of SiO₂-NPs can cut down the light scattering on the AgNW surface through total reflection, thus leading to a low haze of AgNW/SiO₂-based TCFs. Very interestingly, the SiO₂-NPs conducted away most of the heat generated during laser ablation, protecting the AgNWs from excessive melt and PET from empyrosis, and thus ensuring the TCFs with high transmittance and patterning accuracy. Besides, AgNW/SiO₂-based TCFs have smaller surface roughness, better flexibility, and adhesive force. To the best of our knowledge, the comprehensive performance of the AgNW/SiO₂-based TCFs reaches the highest level among recently reported novel TCFs.

Electrical and network properties of flexible silver-nanowire composite electrodes under mechanical strain

Flexible and conductive silver-nanowire photopolymer composites are fabricated and studied under mechanical strain. The initial resistances of the unstretched flexible composites are between 0.27 Ω mm-1 and 1.2 Ω mm-1 for silver-nanowire concentrations between 120 μg cm-2 and 40 μg cm-2. Stretching of the samples leads to an increased resistance by a factor of between 72 for 120 μg cm-2 and 343 for 40 μg cm-2 at elongations of 23%. In order to correlate network morphology and electrical properties, micrographs are recorded during stretching. The Fiber Image Network Evaluation (FINE) algorithm determines morphological silver-nanowire network properties under stretching. For unstretched and stretched samples, an isotropic nanowire network is found with only small changes in fiber orientation. Monte-Carlo simulations on 2D percolation networks of 1D conductive wires and the corresponding network resistance due to tunneling of electrons at nanowire junctions confirm that the elastic polymer matrix under strain exhibits forces in agreement with Hooke's law. By variation of a critical force distribution the resistance curves are accurately reproduced. This results in a model that is dominated by quantum-mechanical tunneling at nanowire junctions explaining the electrical behavior and the sensitivity of nanowire-composites with different filler concentrations under mechanical strain.

A review of electronic skin: soft electronics and sensors for human health

This article reviews several categories of electronic skins (e-skins) for monitoring signals involved in human health. It covers advanced candidate materials, compositions, structures, and integrate strategies of e-skin, focusing on stretchable and wearable electronics. In addition, this article further discusses the potential applications and expected development of e-skins. It is possible to provide a new generation of sensors which are able to introduce artificial intelligence to the clinic and daily healthcare.

Functional Printing of Conductive Silver-Nanowire Photopolymer Composites

We investigated the fabrication and functional behaviour of conductive silver-nanowire-polymer composites for prospective use in printing applications. Silver-nanowires with an aspect ratio of up to 1000 were synthesized using the polyol route and embedded in a UV-curable and printable polymer matrix. Sheet resistances in the composites down to 13 Ω/sq at an optical transmission of about 90% were accomplished. The silver-nanowire composite morphology and network structure was investigated by electron microscopy, atomic force microscopy, profilometry, ellipsometry as well as surface sensitive X-ray scattering. By implementing different printing applications, we demonstrate that our silver nanowires can be used in different polymer composites. On the one hand, we used a tough composite for a 2D-printed film as top contact on a solar cell. On the other hand, a flexible composite was applied for a 3D-printed flexible capacitor.

Flexible, transparent patterned electrodes based on graphene oxide/silver nanowire nanocomposites fabricated utilizing an accelerated ultraviolet/ozone process to control silver nanowire degradation

We developed flexible, transparent patterned electrodes, which were fabricated utilizing accelerated ultraviolet/ozone (UV/O₃)-treated graphene oxide (GO)/silver nanowire (Ag-NW) nanocomposites via a simple, low-cost pattern process to investigate the feasibility of promising applications in flexible/wearable electronic and optoelectronic devices. The UV/O₃ process of the GO/Ag-NW electrode was accelerated by the pre-heat treatment, and the degradation interruption of Ag NWs was removed by the GO treatment. After the deposition of the GO-treated Ag NW electrodes, the sheet resistance of the thermally annealed GO-treated Ag-NW electrodes was significantly increased by using the UV/O₃ treatment, resulting in a deterioration of the GO-treated Ag NWs in areas exposed to the UV/O₃ treatment. The degradation of the Ag NWs caused by the UV/O₃ treatment was confirmed by using the sheet resistances, scanning electron microscopy images, X-ray photoelectron microscopy spectra, and transmittance spectra. While the sheet resistance of the low-density Ag-NW electrode was considerably increased due to the pre-thermal treatment at 90 °C for 10 min, that of the high-density Ag-NW electrode did not vary significantly even after a UV/O₃ treatment for a long time. The degradation interference phenomenon caused by the UV/O₃ treatment in the high-density Ag NWs could be removed by using a GO treatment, which resulted in the formation of a Ag-NW electrode pattern suitable for promising applications in flexible organic light-emitting devices. The GO treatment decreased the sheet resistance of the Ag-NW electrode and enabled the pattern to be formed by using the UV/O₃ treatment. The selective degradation of Ag NWs due to UV/O₃ treatment decreased the transparency of the Ag-NW electrode by about 8% and significantly increased its sheet resistance more than 100 times.

Tuneable thermal expansion of poly (3,4-ethylenedioxythiophene) polystyrene sulfonate

Linear coefficient of thermal expansion is calculated for a mixture of poly(3,4-ethylenedioxythiophene) and polystyrene sulfonate (PEDOT:PSS) using density functional theory and the Debye-Grüneisen model. The linear coefficient of thermal expansion is a key factor in thermal management (thermal conductivity, thermal stress and thermal fatigue) of microelectronic and energy devices, being common applications of the conjugated polymeric PEDOT:PSS system. The obtained value of 53  ×  10^-6 K^-1 at room temperature can be rationalised based on the electronic structure analysis. The PEDOT and PSS units are bonded by a dipole-dipole interaction between S in PEDOT and H in PSS. A C-C bond in a benzene ring (PSS) or thiophene (PEDOT) is up to 13 times stronger than the S-H bond. By adjusting the population of the S-H bonds by deprotonating PSS, the linear coefficient of thermal expansion can be enhanced by 57%. This allows for tuning the thermal properties of PEDOT:PSS in cutting-edge devices.

Poole-Frenkel emission on functionalized, multilayered-packed reduced graphene oxide nanoplatelets

The unique electronic, mechanical and optical properties of graphene make it a remarkable 2D material, widely explored in a plethora of applications. However, graphene zero-bandgap and the production of defect-free pristine graphene in large areas still limit some applications. To circumvent these issues, graphene-derived 2D materials have arisen as attractive candidates for low-dimensional systems, which requires a better comprehension of their properties. Here, we report a detailed investigation of the conduction mechanisms of two functionalized reduced graphene oxides (rGOs) nanoplatelets, named GPAH and GPSS. The functionalized rGO nanoplatelets were bottom-up assembled via the layer-by-layer technique, enabling molecular-level thickness control of nanostructures with well-defined composition and structure. For the reported multilayered GPAH/GPSS films the charge carriers followed Mott's law, presenting a typical conduction behavior of 2D systems described by the Poole-Frenkel model. The multilayered GPAH/GPSS nanostructure presented a conductivity of 10^-4 S cm^-1, optical bandgap of ∼3.3 eV and a relative dielectric permittivity (ε _r) of 6.4. Temperature-dependent I-V measurements indicated a strong variation of ε _r below the critical temperature (T _C = 237 K), associated with a high dipole reorientation in the formed GPAH/GPSS nanostructure. All these characteristics make the GPAH/GPSS nanocomposite attractive for graphene-oriented applications, such as electronic devices.

Conductivity enhancement of silver nanowire networks via simple electrolyte solution treatment and solvent washing

As a promising replacement material for indium tin oxide in flexible electronics, silver nanowires (AgNWs) usually need complicated post-treatment to reduce the high contact resistance across the intersections when used as transparent conductive films. In this work, a widely applicable nano-joining method for improving the overall conductivity of AgNW networks with different kinds of electrolyte solutions is presented. By treatment with an electrolyte solution with appropriate ionic strengths, the insulating surfactant layer (polyvinylpyrrolidone, PVP) on the AgNWs could be desorbed, and the AgNW network could be densified. The sheet resistance of the AgNW film on a glass slide is reduced by 60.9% (from 67.5 to 26.4 Ohm sq^-1) with a transmittance of 92.5%. High-resolution transmission electron microscopy analysis indicates that atomic diffusion occurs at the intersection of two AgNWs. Thus, metallurgical bonding on the nanometer scale is achieved across the junctions of the AgNWs, leading to a significant enhancement in the conductivity of the AgNW network.