CO2-Assisted Dehydrogenation of Propane to Propene over Zn-BEA Zeolites: Impact of Acid–Base Characteristics on Catalytic Performance

Research results about the influence of BEA zeolite preliminary dealumination on the acid–base characteristics and catalytic performance of 1% Zn-BEA compositions in propane dehydrogenation with CO2 are presented. The catalyst samples, prepared through a two-step post-synthesis procedure involving partial or complete dealumination of the BEA specimen followed by the introduction of Zn2+ cations into the T-positions of the zeolite framework, were characterized using XRD, XPS, MAS NMR, SEM/EDS, low-temperature N2 ad/desorption, C3H8/C3H6 (CO2, NH3)-TPD, TPO-O2, and FTIR-Py techniques. Full dealumination resulted in the development of a mesoporous structure and specific surface area (BET) with a twofold decrease in the total acidity and basicity of Zn-BEA, and the formation of Lewis acid sites and basic sites of predominantly medium strength, as well as the removal of Brønsted acid sites from the surface. In the presence of the ZnSiBEA catalyst, which had the lowest total acidity and basicity, the obtained selectivity of 86–94% and yield of 30–33% for propene (at 923 K) exceeded the values for ZnAlSiBEA and ZnAlBEA. The results of propane dehydrogenation with/without carbon dioxide showed the advantages of producing the target olefin in the presence of CO2 using Zn-BEA catalysts.

The Synthesis of Different Series of Cobalt BEA Zeolite Catalysts by Post-Synthesis Methods and Their Characterization

Three series of zeolite catalysts Co all-silica and Co Al-containing zeolites beta were prepared for use in the selective oxidative dehydrogenation of propane to propylene. Two series of zeolite catalysts Co all-silica were prepared by a two-step postsynthesis method at pH = 2.5 and pH = 3.0–9.0, respectively, which allows the incorporation of cobalt into SiBEA zeolite in the form of isolated framework pseudo-tetrahedral Co(II) species. The incorporation of Co ions into vacant T-atom sites and their reaction with silanol groups were demonstrated by NMR and FTIR methods. The generation of Lewis acid sites without the formation of Brønsted sites was proved by FTIR using pyridine and CO as probe molecules. The state of cobalt in three series of prepared and calcined zeolite catalysts was characterized by DR UV-vis. This technique allowed to show that for low Co content (<2 wt.%) cobalt is present in the form of framework pseudo-tetrahedral Co(II) species. For higher Co content (>2 wt.%), both framework pseudo-tetrahedral and extra-framework octahedral Co(II) species are present. The Co Al-containing zeolite beta series prepared on non-dealuminated support shows the presence of extra-framework octahedral Co(II) only.

Zeolites in catalysis: sustainable synthesis and its impact on properties and applications

Zeolites are versatile catalysts not only for large scale petrochemical processes but also in applications related to fine chemicals synthesis, biomass conversion and CO2 utilization. Introduction of mesopores and heteroatoms...

Recent Advances in Catalysts for the Conversion of Ethanol to Butadiene

Butadiene is an important monomer for synthetic rubbers. Currently, the annual demand of ∼16 million tonnes is satisfied by butadiene produced as a byproduct of steam naphtha cracking where ethylene and propylene are the main products. The availability of large amounts of shale gas and condensates in the USA since about 2008 has led to a change in the cracker feed from naphtha to ethane and propane, affecting the amount of butadiene obtained. This has provided the impetus to look into direct processes for butadiene production. One option is the eco-friendly conversion of (bio) ethanol to butadiene (ETB). This process had been developed in the 1930s in the then Soviet Union. It was operated on a large scale in USA during World War II but has since been abandoned in favour of petroleum-based processes. The current trend, driven both by the availability of the raw material and ecological considerations, may make this process feasible again, particularly if the catalytic systems can be improved. This critical review discusses recent catalysts for the ETB process with special focus on the development since 2014, benchmarking them against earlier systems with a large database of operational experience.

Ethanol-to-butadiene: the reaction and its catalysts

Catalytic conversion of ethanol is a promising technology for producing sustainable butadiene. This paper reviews the reaction and its catalysts, and discusses the challenges their development faces.

Dealuminated Beta Zeolite Modified by Alkaline Earth Metals

Alkaline Earth metals (Mg, Sr, and Ca) were incorporated into the dealuminated mesoporous beta zeolite (DeAlBeta) by the two-step postsynthesis method. Physicochemical properties of both unmodified and alkaline Earth metal-modified DeAlBeta zeolite were characterized by XRD, DR UV-vis, FTIR, TPD of NH3 and CO2, NMR, and XPS. The dealumination of beta zeolite led to decrease of its acidity and basicity. The incorporation of alkaline Earth metals into the framework of dealuminated beta zeolite did not affect its structure. The modification of DeAlBeta with a small amount of alkaline Earth metals increases the number of acidic centers, which may be related to the formation of framework Mg (Ca or Sr) (II) Lewis acidic sites.

Identification of the silver state in the framework of Ag-containing zeolite by XRD, FTIR, photoluminescence, 109Ag NMR, EPR, DR UV-vis, TEM and XPS investigations

Silver has been identified in the framework of Ag_xSiBEA zeolites (where x = 3-6 Ag wt%) by the combined use of XRD, ¹⁰⁹Ag MAS NMR, FTIR, diffuse reflectance UV-visible, EPR and XPS spectroscopy. The incorporation of Ag ions into the framework of SiBEA zeolite has been evidenced by XRD. The consumption of OH groups as a result of their reaction with the silver precursor has been monitored by FTIR and photoluminescence spectroscopy. The changes in the silver state as a function of Ag content and thermal and hydrogen treatment at 573 K have been identified by ¹⁰⁹Ag MAS NMR, EPR, DR UV-visible, TEM and XPS investigations. The acidity of AgSiBEA has been investigated by FTIR spectroscopy of adsorbed CO and pyridine used as probe molecules.

Nb-Based Zeolites: Efficient bi-Functional Catalysts for the One-Pot Synthesis of Succinic Acid from Glucose

The one-pot production of succinic acid from glucose was investigated in pure hot water as solvent using Nb (0.02 and 0.05 moles%)-Beta zeolites obtained by a post-synthesis methodology. Structurally, they are comprised of residual framework Al-acid sites, extra-framework isolated Nb (V) and Nb₂O₅ pore-encapsulated clusters. The Nb-modified Beta-zeolites acted as bi-functional catalysts in which glucose is dehydrated to levulinic acid (LA) which, further, suffers an oxidation process to succinic acid (SA). After the optimization of the reaction conditions, that is, at 180 °C, 18 bar O₂, and 12 h reaction time, the oxidation of glucose occurred with a selectivity to succinic acid as high as 84% for a total conversion.

Incorporation of Mn into the vacant T-atom sites of a BEA zeolite as isolated, mononuclear Mn: FTIR, XPS, EPR and DR UV-Vis studies

A MnSiBEA zeolite has been prepared via a two-step postsynthesis procedure which consisted, in the first step, of the treatment of a tetraethylammonium BEA zeolite with nitric acid for the formation of vacant T-atom sites and then, in the second step, of the incorporation of Mn ions into the framework, resulting in a SiBEA zeolite, through their reaction with the silanol group of the vacant T-atom sites. The incorporation of Mn ions into the framework of the SiBEA zeolite has been evidenced using XRD. The formation of isolated mononuclear Mn(ii) and Mn(iii) in a MnSiBEA zeolite has been shown using FTIR, diffuse reflectance UV-Vis, EPR and XPS. The acidic properties of the mononuclear manganese species have been investigated via FTIR spectroscopy using pyridine as the probe molecule. The changes in the oxidation state of the Mn species under various treatments have been proven using EPR.

Paramagnetic dioxovanadium(IV) molecules inside the channels of zeolite BEA--EPR screening of VO2 reactivity toward small gas-phase molecules

Interaction of small gas-phase molecules (NO, N2O, O2, CO) with VO2 radicals inside the channels of a dealuminated SiBEA zeolite was investigated by means of electron paramagnetic resonance (EPR), infrared (IR), and mass (QMS) spectroscopies to provide direct insights into the chemistry of a unique paramagnetic state of vanadium - VO2 molecules. A facile way of forming VO2 inside the channels of SiBEA via thermal reduction of VO2(+) precursor cations was shown. Dioxovanadium(IV) was identified based on its unusual EPR signal which, as compared with the typical monooxovanadium(IV) (VO(2+) cation), is featured by rhombic symmetry and a positive Aiso value leading to a hyperfine splitting as large as 32 mT. VO2 molecules exhibit reducing properties transforming N2O and O2 into vanadium intrachannel cage adducts comprising of reactive oxygen species (O(-) and O2(-), respectively). Interaction with CO led to its oxidation to CO2, while paramagnetic NO acted as a scavenger for VO2 radicals producing diamagnetic adducts. The observed reactivity was rationalized in terms of spin-pairing, electron transfer, and oxygen transfer processes. As a result new chemical pathways of vanadium reactivity were demonstrated which were not observed so far either in the homogeneous molecular systems or supported vanadium materials.

Elaboration, characterization and properties of silica-based single-site heterogeneous photocatalysts

This study concerns single-site heterogeneous photocatalysts, composed of isolated transition metals ions (single-sites) dispersed on silica-based supports, which can be used as photocatalysts. The first part gives the definition of single-site heterogeneous catalysts. The main difficulty to prepare the latter resides in the speciation of the key elements (metal of the catalytically active phase and oxygen of the solid support) and other species (notably counter ions and ligands) the presence of which depends on the synthesis method adopted. The best preparation methods as well as the ideal features of single-site heterogeneous photocatalysts are discussed before the study focuses on single-site heterogeneous photocatalysts. Case studies are presented with photocatalysts involving titanium and chromium, and their photocatalytic reactions such as CO 2 reduction with H 2 O, degradation of organic pollutants diluted in water, NO decomposition and selective oxidation of propane are also described.