Simultaneous determination of copper and zinc in the hair of children by pH gradient construction in a flow-injection system

Utilization of a novel PVC- optical sensor for high sensitive and selective determination of zinc ion in real samples

A novel and highly specific bulk membrane optode was developed for the ultra-sensitive detection of zinc(II) in biological, pharmaceutical, and water samples. The polymer inclusion membrane (PIM) utilized in this study consists of 50% polyvinyl chloride (PVC) as a base polymer, 9.00% DOP (dioctylphthalate) as the plasticizer, and 40.0% D2EHPA (di(2-ethlyhexyl)phosphoric acid) as the carrier. To facilitate the spectrophotometric determination of zinc(II), a colorimetric reagent, namely 4-(2-arsonophenylazo) salicylic acid (APASA) {1.00%, m/v}, was employed. When Zn(II) was extracted into the PIM, it led to the creation of the zinc-D2EHPA complex. This complex then underwent a reaction with APASA, resulting in the formation of a red Zn - APASA complex with a maximum absorption wavelength (λmax) of 558 nm. To optimize the response of the optode, a central composite design was employed, considering variables such as the amount of additive and reagent, response time, and pH. When operated under the specific optimal conditions, the sensor demonstrated a limit of quantification (LOQ) of 0.74 ng/mL (equivalent to 1.17 × 10-8 M) and a limit of detection (LOD) of 0.22 ng/mL (equivalent to 3.44 × 10-9 M). The optode membrane demonstrated excellent reproducibility, stability, and a relatively long lifespan, making it suitable for precise and accurate monitoring of Zn(II) ion content. Regeneration of the optode was achieved effectively using 0.25 nitric acid solution, and its response exhibited reversibility and reproducibility, showed a relative standard deviation of less than 1.33%. Moreover, the PIM-APASA optode exhibited a high level of effectiveness in accurately determining the presence of Zn(II) ions in real environmental samples.

Utility of 5-(2',4'-dimethylphenylazo)-6-hydroxy-pyrimidine-2,4-dione in PVC membrane for a novel green optical chemical sensor to detect zinc ion in environmental samples

In plasticized (2-nitro-phenyloctyl ether (o-NPOE)) and polyvinyl chloride (PVC) membrane incorporating (N,N-diethyl-5-(octadecanoylimino)-5H-benzo[a] phenolxazine-9-amine (ETH 5294) and sodium tetraphenyl borate (NaTPB), an ionophore 5-(2',4'-dimethylphenylazo)-6-hydroxy-pyrimidine-2,4-dione (DMPAHPD) form an optical chemical sensor for zinc determination is ascribed. The sensor response is based on selective complexation of Zn²⁺ with DMPAHPD in the designed membrane phase, resulting in an ion exchange process between H⁺ in the membrane and Zn²⁺ in the sample solution. The influences of several experimental parameters, as membrane composition, pH, and type and concentration of the regenerating reagent, were demonstrated. The sensor has a response range of 5.0 × 10^-9 to 2.5 × 10^-5 M Zn²⁺ with detection and quantification limits of 1.6 × 10^-9 and 4.9 × 10^-9 M, respectively. The response time of 1 min at 0.1 M phosphate buffer solution of pH 5.0 with recording repeatability and sensor-to sensor reproducibility is reported. The proposed sensor signifies high selectivity for Zn²⁺ over various transition metal ions, alkali, and alkaline earth ions. The sensor membrane can be simply regenerated with 0.5 M HNO₃. The sensor has been used to assess Zn²⁺ in river, waste, tap, sea, well, and spring waters samples, serum of diabetic patients, powdered milk, hair, red meat, pharmaceutical formulations, and talc powder samples.

Sequential injection system with in-line solid phase extraction and soil mini-column for determination of zinc and copper in soil leachates

A sequential injection (SI) system equipped with in-line solid phase extraction column and in-line soil mini-column is proposed for determination of zinc and copper in soil leachates. The spectrophotometric determination (560 nm) is based on the reaction of both analytes with 1-(2-Pyridylazo)-2-naphthol (PAN). Zinc is determined after retaining copper on a cationic resin (Chelex100) whereas copper is determined from the difference of the absorbance measured for both analytes, introduced into the system with the use of a different channel, and zinc absorbance. The influence of several potential interferences was studied. Using the developed method, zinc and copper were determined within the concentration ranges of 0.005-0.300 and 0.011-0.200 mg L^-1, and with a relative standard deviation lower than 6.0% and 5.1%, respectively. The detection limits are 1.4 and 3.0 µg/L for determination of zinc and copper, respectively. The developed SI method was verified by the determination of both analytes in synthetic and certified reference materials of water samples, and applied to the determination of the analytes in rain water and soil leachates from laboratory scale soil core column and in-line soil mini-column.

A spectrophotometric method for the determination of zinc, copper, and cobalt ions in metalloproteins using Zincon

Zincon (2-carboxy-2'-hydroxy-5'-sulfoformazylbenzene) has long been known as an excellent colorimetric reagent for the detection of zinc and copper ions in aqueous solution. To extend the chelator's versatility to the quantification of metal ions in metalloproteins, the spectral properties of Zincon and its complexes with Zn(2+), Cu(2+), and Co(2+) were investigated in the presence of guanidine hydrochloride and urea, two common denaturants used to labilize metal ions in proteins. These studies revealed the detection of metals to be generally more sensitive with urea. In addition, pH profiles recorded for these metals indicated the optimal pH for complex formation and stability to be 9.0. As a consequence, an optimized method that allows the facile determination of Zn(2+), Cu(2+), and Co(2+) with detection limits in the high nanomolar range is presented. Furthermore, a simple two-step procedure for the quantification of both Zn(2+) and Cu(2+) within the same sample is described. Using the prototypical Cu(2+)/Zn(2+)-protein superoxide dismutase as an example, the effectiveness of this method of dual metal quantification in metalloproteins is demonstrated. Thus, the spectrophotometric determination of metal ions with Zincon can be exploited as a rapid and inexpensive means of assessing the metal contents of zinc-, copper-, cobalt-, and zinc/copper-containing proteins.

Kinetic separation in flow injection spectrophotometry: Simultaneous determination of copper and zinc in a single run

A flow injection spectrophotometric method for the simultaneous determination of copper (II) and zinc (II) in mixtures was developed, utilizing metal-zincon complex formation and kinetic differences in the ligand substitution reaction of these complexes with aminopolycarboxylic acids at pH 9.18. The linear range for the determination of zinc is 0.2-9.7 microg ml(-1) and for copper is 0.2-3.5 microg ml(-1). About 90 samples can be determined in 1h. The proposed method has been applied to the determination of zinc and copper in various vitamin formulations with no need for previous separation.