Two amino acid-templated metal phosphates: surfactant-thermal synthesis, water stability, and proton conduction

Two new metal phosphates, namely, Zn(HPO₄)(C₆H₁₁NO₂) (1) and (C₅H₁₀NO₂)Ga₄(PO₄)₄F·3H₂O (2), were prepared under surfactant-thermal conditions. Single-crystal X-ray diffraction analyses reveal that compound 1 has a zigzag-chain structure decorated with homoproline and compound 2 has a three-dimensional zeolite-like structure templated by proline. Notably, compound 2 remains stable in both boiling water and aqueous solutions with a pH range of 2-12. It shows a proton conductivity of 8.89 × 10^-4 S cm^-1 at 85 °C and 95% relative humidity.

First preparation of microporous AFY-type MeAPOs by topotactic pillaring of lamellar aluminophosphate precursors

Topotactic pillaring of lamellar aluminophosphate (ALPO) layers with zinc cations is used to prepare microporous zincoaluminophosphate (ZnAPO) with an AFY-type framework for the first time.

Dimensional Reduction From 2D Layer to 1D Band for Germanophosphates Induced by the "Tailor Effect" of Fluoride

The "tailor effect" of fluoride, exclusively as a terminal rather than a bridge, was applied successfully to design low-dimensional structures in the system of transition metal germanophosphates for the first time. Two series of new compounds with low-dimensional structures are reported herein. K[M(II)Ge(OH)2(H0.5PO4)2] (M = Fe, Co) possess flat layered structures built from single chains of edge-sharing M(II)O6 and GeO6 octahedra interconnected by HPO4 tetrahedra. Their fluorinated derivatives, K4[M(II)Ge2F2(OH)2(PO4)2(HPO4)2]·2H2O (M = Fe, Co), exhibit band structures of two four-membered ring germanium phosphate single chains sandwiched by M(II)O6 octahedra via corner-sharing. Both of these structures contain anionic chains of the condensation of four-membered rings built from alternating GeO4Φ2 (Φ = F, OH) octahedra and PO4 tetrahedra via sharing common GeO4Φ2 (Φ = F, OH) octahedra, the topology of which is the same as that of the mineral kröhnkite [Na2Cu(SO4)2·2H2O]. Note that the switch from the two-dimensional layered structure to the one-dimensional band structure was performed simply by the addition of a small amount of KF·2H2O to the reaction mixture. This structural alteration arises from the incorporation of one terminal F atom to the coordination sphere of Ge, which breaks the linkage between the transition metal and germanium octahedra in the layer to form the band structure.

Ferric Phosphate Hydroxide Microstructures Affect Their Magnetic Properties

Uniformly sized and shape-controlled nanoparticles are important due to their applications in catalysis, electrochemistry, ion exchange, molecular adsorption, and electronics. Several ferric phosphate hydroxide (Fe4(OH)3(PO4)3) microstructures were successfully prepared under hydrothermal conditions. Using controlled variations in the reaction conditions, such as reaction time, temperature, and amount of hexadecyltrimethylammonium bromide (CTAB), the crystals can be grown as almost perfect hyperbranched microcrystals at 180 °C (without CTAB) or relatively monodisperse particles at 220 °C (with CTAB). The large hyperbranched structure of Fe4(OH)3(PO4)3 with a size of ∼19 μm forms with the "fractal growth rule" and shows many branches. More importantly, the magnetic properties of these materials are directly correlated to their size and micro/nanostructure morphology. Interestingly, the blocking temperature (T B) shows a dependence on size and shape, and a smaller size resulted in a lower T B. These crystals are good examples that prove that physical and chemical properties of nano/microstructured materials are related to their structures, and the precise control of the morphology of such functional materials could allow for the control of their performance.

Self assembled homodinuclear dithiocarbamates: one pot synthesis and spectral characterization

Several self assembled homodinuclear complexes of the type [M2(Ldtc)2·4H2O] derived from quadridentate ligand (Ldtc), where Ldtc = 2-aminobenzoylhydrazidebis(dithiocarbamate) and M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II) have been reported. The in situ procedure gives high yield with the formation of single product as evident by TLC and various other physicochemical techniques. Elemental analysis, TGA, (1)H NMR, (13)C NMR, ESI mass spectrometry, EPR, UV-vis. and IR spectroscopy were used to characterize the homodinuclear complexes. The spectroscopic evidences and room temperature magnetic moment values suggest that all the complexes have octahedral geometry around the transition metal atom. A symmetrical bidentate coordination of the dithiocarbamato moiety has been observed in all the complexes. The energy-minimized structure of the molecule also showed that each metal atom acquires a distorted octahedral geometry. The complexes exhibit a three-step thermolytic pattern and are non-electrolyte in nature.

Synthesis and characterization of a new aluminophosphate with a Al3P6O249− three-dimensional framework

A novel metal aluminophosphate, K₆Na₃Al₃P₆O₂₄, exhibits a unique Al₃P₆O₂₄⁹⁻ three-dimensional framework with an Al/P ratio of 1/2.

Synthesis and characterization of a new layered fluoroaluminophosphate (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O with extra-large 16-rings

A new two-dimensional-layered fluoroaluminophosphate (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O (denoted as AlPO-CJ20) with an Al/P ratio of 4:5 has been synthesized solvothermally by using 2-amino-2-methyl-1-propanol as the structure-directing agent. Its structure was determined by single-crystal X-ray diffraction analysis and further characterized by solid-state NMR techniques, including 27Al, 19F --> 27Al cross-polarization, and 31P magic angle spinning NMR. The alternation of Al-centered tetrahedra (AlO4 and AlO3F) and PO3(=O) tetrahedra gives rise to a new type of 4.6.16-net sheet. The inorganic sheets are stacked in an ABAB sequence along the [010] direction and further held together through strong H bonds between protonated template molecules and P=O groups in the inorganic layers. Except for Mu-4, AlPO-CJ20 is the second layered aluminophosphate with an Al/P ratio of 4:5, and it contains the largest pore opening of 16-rings in the known layered aluminophosphates. Furthermore, the coordination of Al and P of fluoroaluminophosphates is summarized. Crystal data: (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O, monoclinic, C2/c (No. 15), a = 32.678(7) A, b = 12.956(3) A, c = 21.045(4) A, beta = 115.17(3) degrees, V = 8064(3) A3, Z = 8, R1 = 0.0837 [I > 2sigma(I)], and wR2 = 0.2428 (all data).

Two Organically Templated Niobium and Zinconiobium Fluorophosphates: Low Temperature Hydrothermal Syntheses of NbOF(PO4)2(C2H10N2)2 and Zn3(NbOF)(PO4)4(C2H10N2)2

Two new niobium and zinconiobium fluorophosphates, NbOF(PO4)2(C2H10N2)2 (1) and Zn3(NbOF)(PO4)4-(C2H10N2)2 (2), have been prepared under hydrothermal conditions using ethylenediamine as a template. The structures were determined by single crystal diffraction to be triclinic, space group P1 (No. 2), a = 8.1075 (6) A, b = 9.8961 (7) A, c = 10.1420(8) A, alpha = 111.655(1) degrees, beta = 111.51(1) degrees, gamma = 93.206(1) degrees, V = 686.19(9) A3, and Z = 2 for 1 and orthorhombic, space group Fddd (No. 70), a = 9.1928(2) A, b = 14.2090(10) A, c = 32.2971 (6) A, V = 4218.66(12) A3, and Z = 8 for 2, respectively. Compound 1 is an infinite linear chain consisting of corner-sharing [Nb2P2] 4-MRs bridged at the Nb centers with organic amines situated between chains, and compound 2, containing the chains similar to that in 1, forms a zeotype framework with organic amines situated in the gismondine-type [4684] cavities. The topology of 2 was previously unknown with vertex symbol 4 x 4 x 4 x 4 x 8 x 8 (vertex 1), 4 x 4 x 4 x 82 x 8 x 8 (vertex 2), 4 x 4 x 8 x 8 x 82 x 82 (vertex 3), and 4 x 4 x 4 x 82 x 8 x 8 (vertex 4). The topological relationships between the 4-connected network of 2 and several reported (3,4)-connected networks were discussed.

Syntheses and Structures of Two Low-Dimensional Beryllium Phosphate Compounds: [C5H14N2]2[Be3(HPO4)5]·H2O and [C6H18N2]0.5[Be2(PO4)(HPO4)OH]·0.5H2O

The first two low-dimensional beryllium phosphates, [C5H14N2]2[Be3(HPO4)5].H2O (BePO-CJ29) and [C6H18N2]0.5[Be2(PO4)(HPO4)OH].0.5 H2O (BePO-CJ30), have been successfully synthesized under mild hydrothermal/solvothermal conditions. BePO-CJ29 is built up from strict alternation of BeO4 and HPO4 tetrahedra forming a unique one-dimensional double chains with 12-ring apertures. There are pseudo-10-ring apertures enclosed by two double chains through H-bonds. BePO-CJ29 can also be viewed as a pseudo 2-D layered structure stabilized by strong H-bonds. The diprotonated 2-methylpiperazium cations are located at three positions (i.e., inside the 12-ring aperture, inside the pseudo-10-ring aperture, and in the interlayer of the inorganic pseudo-layers. BePO-CJ30 is constructed by the alternation of Be-centered tetrahedra (including BeO4 and HBeO4) and P-centered tetrahedra (including PO4 and HPO4) resulting in a two-dimensional layered structure parallel to the (0 1 1) direction. The complex layer is composed of coupled 4.8 net sheets. The diprotonated 1,6-hexandiamine cations and water molecules reside in the interlayer regions and interact with the inorganic layers through H-bonds. Crystal data are as follows: [C5H14N2]2[Be3(HPO4)5].H2O (BePO-CJ29), triclinic, P1 (No. 2), a = 8.1000(9) A, b = 8.4841(14) A, c = 19.665(2) A, alpha = 89.683(10) degrees, beta = 78.182(8) degrees, gamma = 87.932(9) degrees, V = 1321.9(3) A3, Z = 2, R1 = 0.0523 (I > 2sigma(I)), and wR2 = 0.1643 (all data); [C6H18N2]0.5[Be2(PO4)(HPO4)OH].0.5 H2O (BePO-CJ30), orthorhombic, Pccn (No. 56), a = 26.01(4) A, b = 8.431(12) A, c = 9.598(13) A, V = 2105(5) A3, Z = 8, R1 = 0.0833 (I > 2sigma(I)), and wR2 = 0.2278 (all data).

Synthesis, Crystal Structure, and Solid-State NMR Spectroscopy of a New Open-Framework Aluminophosphate (NH4)2Al4(PO4)4(HPO4)·H2O

A new three-dimensional open-framework aluminophosphate (NH(4))(2)Al(4)(PO(4))(4)(HPO(4)).H(2)O (denoted AlPO-CJ19) with an Al/P ratio of 4/5 has been synthesized, using pyridine as the solvent and 2-aminopyridine as the structure-directing agent, under solvothermal conditions. The structure was determined by single-crystal X-ray diffraction and further characterized by solid-state NMR techniques. The alternation of the Al-centered polyhedra (including AlO(4), AlO(5), and AlO(6)) and the P-centered tetrahedra (including PO(4) and PO(3)OH) results in an interrupted open-framework structure with an eight-membered ring channel along the [100] direction. This is the first aluminophosphate containing three kinds of Al coordinations (AlO(4), AlO(5), and AlO(6)) with all oxygen vertexes connected to framework P atoms. (27)Al MAS NMR, (31)P MAS NMR, and (1)H --> (31)P CPMAS NMR characterizations show that the solid-state NMR techniques are an effective complement to XRD analysis for structure elucidation. Furthermore, all of the possible coordinations of Al and P in the aluminophosphates with an Al/P ratio of 4/5 are summarized. Crystal data: (NH(4))(2)Al(4)(PO(4))(4)(HPO(4))xH(2)O, monoclinic P2(1) (No. 4), a = 5.0568(3) A, b = 21.6211(18) A, c = 8.1724(4) A, beta = 91.361(4) degrees , V = 893.27(10) A(3), Z = 2, R(1) = 0.0456 (I > 2 sigma(I)), and wR(2) = 0.1051 (all data).

Investigation on the chain-to-chain and chain-to-open-framework transformations of two one-dimensional aluminophosphate chains

Using ethylenediamine as a template, two one-dimensional (1-D) aluminophosphate compounds [AlP(2)O(8)H][NH(3)CH(2)CH(2)NH(3)] (1) and [AlP(2)O(8)][NH(3)CH(2)CH(2)NH(3)][NH(4)] (2) have been prepared from a gel system: 1.0:x:y:44 Al(i-PrO)(3)-H(3)PO(4)-en-EG (x = 3.0-9.0, y = 1.0-11.0). Compound 1 consists of edge-sharing four-membered ring (MR) chains, denoted as AlPO-ESC, and compound 2 consists of corner-sharing 4-MR chains, denoted as AlPO-CSC. The molar ratio of en:H(3)PO(4) in the starting gel has an important influence on the final product. If en:H(3)PO(4) > or = 1, AlPO-CSC is obtained, while if en:H(3)PO(4) < 1, AlPO-ESC is formed. These two chains can transform to each other upon addition of some extra amount of en or H(3)PO(4) to the reaction mixture in which AlPO-ESC or AlPO-CSC is crystallized. On the basis of XRD and (27)Al and (31)P MAS NMR analyses, a possible chain-to-chain transformation mechanism is proposed. The corner-sharing 4-MR chains of AlPO-CSC, as well as the edge-sharing 4-MR chains of AlPO-ESC can be assembled to 3-D open-framework compound NiAlP(2)O(8).C(2)N(2)H(9) through Ni(2+) cations. It is noted that AlPO-CSC remains in the structure of NiAlP(2)O(8).C(2)N(2)H(9). It is believed that AlPO-ESC might be first transformed to AlPO-CSC followed by the assembly to 3-D open-framework of NiAlP(2)O(8).C(2)N(2)H(9) through Ni(2+) cations.