Reference materials for the monitoring of the aquatic environment--a review with special emphasis on organic priority pollutants

Development of a Water Matrix Certified Reference Material for Volatile Organic Compounds Analysis in Water

Water matrix certified reference material (MCRM) of volatile organic compounds (VOCs) is used to provide quality assurance and quality control (QA/QC) during the analysis of VOCs in water. In this research, a water MCRM of 28 VOCs was developed using a “reconstitution” approach by adding VOCs spiking, methanol solution into pure water immediately prior to analysis. The VOCs spiking solution was prepared gravimetrically by dividing 28 VOCs into seven groups, then based on ISO Guide 35, using gas chromatography-mass spectrometry (GC-MS) to investigate the homogeneity and long-term stability. The studies of homogeneity and long-term stability indicated that the batch of VOCs spiking solution was homogeneous and stable at room temperature for at least 15 months. Moreover, the water MCRM of 28 VOCs was certified by a network of nine competent laboratories, and the certified values and expanded uncertainties of 28 VOCs ranged from 6.2 to 17 μg/L and 0.5 to 5.3 μg/L, respectively.

A journey towards whole water certified reference materials for organic substances: measuring polycyclic aromatic hydrocarbons as required by the European Union Water Framework Directive

In 2000, the Water Framework Directive (WFD) came into force in the European Union with the aim of protecting and improving water quality. The priority substances established to be monitored are predominantly organic compounds, for which the WFD sets the requirement of 'whole water sample' analysis. This legislative requirement poses analytical challenges for the monitoring laboratories as well as technical challenges for reference materials producers. In the past, there were attempts to produce reference materials as quality assurance/quality control tools for measuring organic priority substances in whole water. A critical reflection on the approaches and solutions applied to prepare such kind of matrix reference materials is presented along with a discussion on the difficulties encountered by the analytical laboratories in analysing such complex matrices. The Certified Reference Material (CRM) ERM-CA100 can be considered as a pioneer for a 'whole water' CRM (containing humic acids) and has been designed for the analysis of polycyclic aromatic hydrocarbons (PAHs). Further developments seem to be necessary to upgrade the design towards a CRM which will also include suspended particulate matter, another basic constituent of natural surface water samples.

Recent developments of certified reference materials for road transportation

Chemical measurements often constitute the basis for informed decision-making at different levels in society; sound decision-making is possible only if the quality of the data used is uncompromised. To guarantee the reliability and comparability of analytical data an intricate system of quality-assurance measures has to be put into effect in a laboratory. Reference materials and, in particular, certified reference materials (CRMs) are essential for achieving traceability and comparability of measurement results between laboratories and over time. As in any other domain of analytical chemistry, techniques used to monitor the levels and fate of contaminants in the environment must be calibrated using appropriate calibration materials, and the methods must be properly validated using fit-for purpose matrix-matched CRMs, to ensure confidence in the data produced. A sufficiently large number of matrix CRMs are available for analysis of most elements, and the group of chemicals known as persistent organic pollutants, in environmental compartments and biota. The wide variety of analyte/level/matrix/matrix property combinations available from several suppliers enables analysts to select CRMs which sufficiently match the properties of the samples they analyse routinely. Certified reference materials are playing an increasing role in the monitoring of environmental pollution. This paper is an attempt for describing the recent development of certified reference materials for road transportation, which mainly covers the combustion of fossil fuel, road side dust etc.

Certified reference materials for inorganic and organic contaminants in environmental matrices

Chemical measurements often constitute the basis for informed decision-making at different levels in society; sound decision-making is possible only if the quality of the data used is uncompromised. To guarantee the reliability and comparability of analytical data an intricate system of quality-assurance measures has to be put into effect in a laboratory. Reference materials and, in particular, certified reference materials (CRMs) are essential for achieving traceability and comparability of measurement results between laboratories and over time. As in any other domain of analytical chemistry, techniques used to monitor the levels and fate of contaminants in the environment must be calibrated using appropriate calibration materials, and the methods must be properly validated using fit-for-purpose matrix-matched CRMs, to ensure confidence in the data produced. A sufficiently large number of matrix CRMs are available for analysis of most elements, and the group of chemicals known as persistent organic pollutants, in environmental compartments and biota. The wide variety of analyte/level/matrix/matrix property combinations available from several suppliers enables analysts to select CRMs which sufficiently match the properties of the samples they analyse routinely. Materials value-assigned for the so-called emerging pollutants are scarce at the moment, though an objective of current development programmes of CRM suppliers is to overcome this problem.