Calixarene-coated water-soluble CdSe–ZnS semiconductor quantum dots that are highly fluorescent and stable in aqueous solution

Precise supramolecular control of surface coverage densities on polymer micro- and nanoparticles

We report herein the controlled surface functionalization of micro- and nanoparticles by supramolecular host-guest interactions. Our idea is to exploit the competition of two high-affinity guests for binding to the surface-bound supramolecular host cucurbit[7]uril (CB7). To establish our strategy, surface azide groups were introduced to hard-sphere (poly)methylmethacrylate particles with a grafted layer of poly(acrylic acid), and a propargyl derivative of CB7 was coupled to the surface by click chemistry. The amount of surface-bound CB7 was quantified with the high-affinity guest aminomethyladamantane (AMADA), which revealed CB7 surface coverage densities around 0.3 nmol cm-2 indicative of a 3D layer of CB7 binding sites on the surface. The potential for surface functionalization was demonstrated with an aminoadamantane-labeled rhodamine (Ada-Rho) as a second high-affinity guest. Simultaneous incubation of CB7-functionalized particles with both high-affinity guests, AMADA and Ada-Rho, revealed a simple linear relationship between the resulting surface coverage densities of the model fluorescent dye and the mole fraction of Ada-Rho in the incubation mixture. This suggests a highly modular supramolecular strategy for the stable immobilization of application-relevant molecules on particle surfaces and a precise control of their surface coverage densities.

Liposomal internal viscosity affects the fate of membrane deformation induced by hypertonic treatment

Artificial lipid membranes have been utilized to understand the physical mechanisms of the deformation patterns of live cells. However, typical artificial membrane systems contain only dilute components compared to those in the cytoplasm of live cells. By using giant unilamellar liposomes containing dense protein solutions similar to those in live cells, we here reveal that viscosity derived from internal crowding affects the deformation patterns of lipid membranes. After hypertonic treatment, liposome deformation patterns transitioned from budding to tubing when the initial internal macromolecular concentrations were increased. Remarkably, instead of observing different transition concentrations between two species of macromolecules, the viscosity at the transition concentration was found to be similar. Further analyses clearly demonstrated that the internal viscosity affects the deformation patterns of lipid membranes induced by hypertonic treatment. These results indicate that the viscosity of the cytoplasm is a key factor in determining cell deformation, and suggest the association of a process involving dynamic instability, such as a viscous fingering phenomenon, during the determination of deformation patterns by hypertonic treatment.

A review on fluorescent inorganic nanoparticles for optical sensing applications

Fluorescent inorganic nanoparticles are immerging novel materials that can be adopted for a large number of optical bioassays and chemical sensing probes.

Layer-by-layer modification of high surface curvature nanoparticles with weak polyelectrolytes using a multiphase solvent precipitation process

The layer-by-layer modification of ≈5 nm mercaptocarboxylic acid stabilized gold nanoparticles was studied in an effort to illustrate effective means to overcome practical issues in handling and performing surface modification of such extremely small materials. To accomplish this, each layer deposition cycle was separated into a multi-step process wherein solution pH was controlled in two distinct phases of polyelectrolyte adsorption and centrifugation. Additionally, a solvent precipitation step was introduced to make processing more amenable by concentrating the sample and exchanging solution pH before ultracentrifugation. The pH-dependent assembly on gold nanoparticles was assessed after each layer deposition cycle by monitoring the plasmon peak absorbance location, surface charge, and the percentage of nanoparticles recovered. The selection of solution pH during the adsorption phase was found to be a critical parameter to enhance particle recovery and maximize surface charge when coating with weak polyelectrolytes. One bilayer was deposited with a high yield and the modified particles exhibited enhanced colloidal stability across a broad pH range and increased ionic strength. These findings support the adoption of this multi-step processing approach as an effective and generalizable approach to improve stability of high surface curvature particles.

One-dimensional proteomic profiling of Danio rerio embryo vitellogenin to estimate quantum dot toxicity

BACKGROUND

Vitellogenin (Vtg) is the major egg yolk protein (YP) in most oviparous species and may be useful as an indicator in ecotoxicological testing at the biochemical level. In this study, we obtained detailed information about the Vtgs of Danio rerio embryos by cutting SDS-PAGE gel lanes into thin slices, and analyzing them slice-by-slice with (MALDI-TOF) mass spectrometry.

RESULTS

We conducted three proteomic analyses, comparing embryonic Danio rerio Vtg cleavage products after exposure for 48 h to CdSecore/ZnSshell quantum dots (QDs), after exposure to a mixture of the components used for quantum dot synthesis (MCS-QDs), and in untreated embryos. The Vtg mass spectrometric profiles of the QDs-treated embryos differed from those of the unexposed or MCS-QDs-treated embryos.

CONCLUSION

This study demonstrates the possible utility of Vtg profiling in D. rerio embryos as a sensitive diagnostic tool to estimate nanoparticle toxicity.

Synthesis of AS1411-aptamer-conjugated CdTe quantum dots with high fluorescence strength for probe labeling tumor cells

In this paper, we report microwave-assisted, one-stage synthesis of high-quality functionalized water-soluble cadmium telluride (CdTe) quantum dots (QDs). By selecting sodium tellurite as the Te source, cadmium chloride as the Cd source, mercaptosuccinic acid (MSA) as the capping agent, and a borate-acetic acid buffer solution with a pH range of 5-8, CdTe nanocrystals with four colors (blue to orange) were conveniently prepared at 100 °C under microwave irradiation in less than one hour (reaction time: 10-60 min). The influence of parameters such as the pH, Cd:Te molar ratio, and reaction time on the emission range and quantum yield percentage (QY%) was investigated. The structures and compositions of the prepared CdTe QDs were characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, selective area electron diffraction, and X-ray powder diffraction experiments. The formation mechanism of the QDs is discussed in this paper. Furthermore, AS1141-aptamer-conjugated CdTe QDs in the U87MG glioblastoma cell line were assessed with a fluorescence microscope. The obtained results showed that the best conditions for obtaining a high QY of approximately 87% are a pH of 6, a Cd:Te molar ratio of 5:1, and a 30-min reaction time at 100 °C under microwave irradiation. The results showed that AS1141-aptamer-conjugated CdTe QDs could enter tumor cells efficiently. It could be concluded that a facile high-fluorescence-strength QD conjugated with a DNA aptamer, AS1411, which can recognize the extracellular matrix protein nucleolin, can specifically target U87MG human glioblastoma cells. The qualified AS1411-aptamer-conjugated QDs prepared in this study showed excellent capabilities as nanoprobes for cancer targeting and molecular imaging.

Host-guest sensing by calixarenes on the surfaces

The present critical review reports on recent developments of optical nanoparticles based on the association of gold, silver, silica and quantum dots and calixarenes. These hybrid organic-inorganic compounds characterized by a thick organic layer self-assembled on the surface of a core of mineral surface atoms take advantage of the supramolecular recognition of luminescent calixarenes to fabricate nanodevices of nanoparticle size, capable of detecting metal cations, polyaromatic hydrocarbons and pesticides. Also presented is an explanation of the involvement of such nanoparticles in biochemical systems. This critical review provides an overview of their preparation, the manner in which they are characterized, and their use (108 references).

Antibody-protein A conjugated quantum dots for multiplexed imaging of surface receptors in living cells

To use quantum dots (QDs) as fluorescent probes for receptor imaging, QD surface should be modified with biomolecules such as antibodies, peptides, carbohydrates, and small-molecule ligands for receptors. Among these QDs, antibody conjugated QDs are the most promising fluorescent probes. There are many kinds of coupling reactions that can be used for preparing antibody conjugated QDs. Most of the antibody coupling reactions, however, are non-selective and time-consuming. In this paper, we report a facile method for preparing antibody conjugated QDs for surface receptor imaging. We used ProteinA as an adaptor protein for binding of antibody to QDs. By using ProteinA conjugated QDs, various types of antibodies are easily attached to the surface of the QDs via non-covalent binding between the F(c) (fragment crystallization) region of antibody and ProteinA. To show the utility of ProteinA conjugated QDs, HER2 (anti-human epidermal growth factor receptor 2) in KPL-4 human breast cancer cells were stained by using anti-HER2 antibody conjugated ProteinA-QDs. In addition, multiplexed imaging of HER2 and CXCR4 (chemokine receptor) in the KPL-4 cells was performed. The result showed that CXCR4 receptors coexist with HER2 receptors in the membrane surface of KPL-4 cells. ProteinA mediated antibody conjugation to QDs is very useful to prepare fluorescent probes for multiplexed imaging of surface receptors in living cells.

Selective decoration of metal nanoparticles inside or outside of organic microstructures via self-assembly of resorcinarene

A facile template method was described for the decoration of organic microtubes with various nanoparticles (NPs), which was achieved in a straightforward "mix" process in the presence of templates and resorcinarene-functionalized nanoparticles (AuNPs, AgNPs, PtNPs, and PdNPs). A combination of UV-visible spectra and Fourier transform-infrared spectroscopy, transmission electron microscopy, field emission scanning electron microscopy, X-ray diffraction measurements, contact angle experiment, and energy dispersive X-ray spectroscopy was used for analysis. Interestingly, it was found that NPs could be encapsulated into the microtubes during the process of resorcinarene self-assembly. As a model system, AuNP-loaded microtubes were investigated and discussed, and loaded nanoparticles with a narrow size distribution were observed. Furthermore, AuNP-decorated microsheets could also be obtained by the assembly of resorcinarene with hydrazide groups. Remarkably, it was also observed that the incorporated NPs could be redispersed by treating the NP-loaded microtubes, which made it possible to realize the uptake and release of given nanoparticles. This procedure was scalable to diverse resorcinarene-based self-assemblies and applicable to various metal nanoparticles that decorate by resorcinarenes.

Synthesis and Characterization of Anti-HER2 Antibody Conjugated CdSe/CdZnS Quantum Dots for Fluorescence Imaging of Breast Cancer Cells

The early detection of HER2 (human epidermal growth factor receptor 2) status in breast cancer patients is very important for the effective implementation of anti-HER2 antibody therapy. Recently, HER2 detections using antibody conjugated quantum dots (QDs) have attracted much attention. QDs are a new class of fluorescent materials that have superior properties such as high brightness, high resistance to photo-bleaching, and multi-colored emission by a single-light source excitation. In this study, we synthesized three types of anti-HER2 antibody conjugated QDs (HER2Ab-QDs) using different coupling agents (EDC/sulfo-NHS, iminothiolane/sulfo-SMCC, and sulfo-SMCC). As water-soluble QDs for the conjugation of antibody, we used glutathione coated CdSe/CdZnS QDs (GSH-QDs) with fluorescence quantum yields of 0.23∼0.39 in aqueous solution. Dispersibility, hydrodynamic size, and apparent molecular weights of the GSH-QDs and HER2Ab-QDs were characterized by using dynamic light scattering, fluorescence correlation spectroscopy, atomic force microscope, and size-exclusion HPLC. Fluorescence imaging of HER2 overexpressing cells (KPL-4 human breast cancer cell line) was performed by using HER2Ab-QDs as fluorescent probes. We found that the HER2Ab-QD prepared by using SMCC coupling with partially reduced antibody is a most effective probe for the detection of HER2 expression in KPL-4 cells. We have also studied the size dependency of HER2Ab-QDs (with green, orange, and red emission) on the fluorescence image of KPL-4 cells.

Preparation and characterization of highly fluorescent, glutathione-coated near infrared quantum dots for in vivo fluorescence imaging

Fluorescent probes that emit in the near-infrared (NIR, 700-1,300 nm) region are suitable as optical contrast agents for in vivo fluorescence imaging because of low scattering and absorption of the NIR light in tissues. Recently, NIR quantum dots (QDs) have become a new class of fluorescent materials that can be used for in vivo imaging. Compared with traditional organic fluorescent dyes, QDs have several unique advantages such as size- and composition-tunable emission, high brightness, narrow emission bands, large Stokes shifts, and high resistance to photobleaching. In this paper, we report a facile method for the preparation of highly fluorescent, water-soluble glutathione (GSH)-coated NIR QDs for in vivo imaging. GSH-coated NIR QDs (GSH-QDs) were prepared by surface modification of hydrophobic CdSeTe/CdS (core/shell) QDs. The hydrophobic surface of the CdSeTe/CdS QDs was exchanged with GSH in tetrahydrofuran-water. The resulting GSH-QDs were monodisperse particles and stable in PBS (phosphate buffered saline, pH = 7.4). The GSH-QDs (800 nm emission) were highly fluorescent in aqueous solutions (quantum yield = 22% in PBS buffer), and their hydrodynamic diameter was less than 10 nm, which is comparable to the size of proteins. The cellular uptake and viability for the GSH-QDs were examined using HeLa and HEK 293 cells. When the cells were incubated with aqueous solutions of the GSH-QDs (10 nM), the QDs were taken into the cells and distributed in the perinuclear region of both cells. After 12 hrs incubation of 4 nM of GSH-QDs, the viabilities of HeLa and HEK 293 cells were ca. 80 and 50%, respectively. As a biomedical utility of the GSH-QDs, in vivo NIR-fluorescence imaging of a lymph node in a mouse is presented.

Gd3+-functionalized near-infrared quantum dots for in vivo dual modal (fluorescence/magnetic resonance) imaging

Gd(3+)-functionalized near-infrared emitting quantum dots were synthesized as a dual modal contrast agent for in vivo fluorescence imaging and magnetic resonance imaging.

Synthesis of water-soluble CdSe quantum dots by ligand exchange with p-sulfonatocalix(n)arene (n = 4, 6) as fluorescent probes for amino acids

A simple, rapid ligand exchange route to prepare highly fluorescent, stable and water-soluble CdSe quantum dots (QDs) is reported by using p-sulfonatocalix(n)arene (SFCA(n), n = 4 or 6) instead of original trioctylphosphine oxide (TOPO) ligands. The ligands were found to have a profound effect on the luminescence response of QDs to amino acids. The SFCA(4) coated CdSe QDs were sensitive to methionine. On the other hand, SFCA(6) coated CdSe QDs turned out to be sensitive to phenylalanine. To demonstrate the detection capability of these new probes, SFCA(n) (n = 4, 6) coated CdSe QDs were used to detect methionine and phenylalanine in physiological buffer solution. Under optimal conditions, the relative fluorescence intensities of the SFCA(n) coated QDs (n = 4, 6) increased linearly with increasing concentration of amino acids. Methionine and phenylalanine enhanced the luminescence of SFCA(n) coated QDs with a concentration dependence that was best described by a Langmuir-type equation. The possible mechanism is also discussed.

Polymer coating of quantum dots – A powerful tool toward diagnostics and sensorics

The use of quantum dots for biological and biomedical applications is one of the fastest moving fields of nanotechnology today. The unique optical properties of these nanometer-sized semiconductor crystals make them an exciting fluorescent tool for in-vivo and in-vitro imaging as well as for sensoric applications. To apply them in biological fluids or aqueous environment it is essential to modulate the chemical nature of quantum dot surfaces to alter their solubility and add additional chemical functionalities. By employing different coating technologies they cannot only be rendered water soluble but also functionalized to fulfill different tasks, like receptor targeting or sensing of low molecular weight substances. To achieve this goal different polymeric coatings are applied to provide solubility in water and additional functional groups for attachment. Taken together the versatile modifications described in this review make quantum dots a promising alternative to conventional fluorescent dyes and may offer possibilities for new future developments.

Optical Fiber Sensing Using Quantum Dots

Recent advances in the application of semiconductor nanocrystals, or quantumdots, as biochemical sensors are reviewed. Quantum dots have unique optical properties thatmake them promising alternatives to traditional dyes in many luminescence basedbioanalytical techniques. An overview of the more relevant progresses in the application ofquantum dots as biochemical probes is addressed. Special focus will be given toconfigurations where the sensing dots are incorporated in solid membranes and immobilizedin optical fibers or planar waveguide platforms.

Fabrication of CdS/PMMA core/shell nanoparticles by dispersion mediated interfacial polymerization

CdS/PMMA core/shell nanoparticles were synthesized using dispersion-mediated interfacial polymerization, and the transparent PMMA shell not only maintained the optical properties of CdS core but effectively protected the CdS core from environmental perturbation.

Amphiphilic p-sulfonatocalix[4]arene-coated CdSe/ZnS quantum dots for the optical detection of the neurotransmitter acetylcholine

Water-soluble CdSe/ZnS (core-shell) semiconductor quantum dots surface-modified with tetrahexyl ether derivatives of p-sulfonatocalix[4]arene were synthesized for the optical detection of the neurotransmitter acetylcholine.