A new series of molybdenum-(IV), -(V), and -(VI) dithiolate compounds as active site models of molybdoenzymes: preparation, crystal structures, spectroscopic/electrochemical properties and reactivity in oxygen atom transfer

The chemistry of dithietes, 1,2,5,6-tetrathiocins and higher oligomers

The synthesis and reactivity patterns of the strained dithiete ring are compared with their dimeric tetrathiocin counterparts and higher oligomers, highlighting: (i) their cycloaddition chemistry with organic dienophiles as a route to sulfur-containing heterocycles; (ii) their oxidative addition chemistry to low valent transition metal complexes to generate transition metal dithiolate complexes and; (iii) the base-catalysed isomerizations between different dithiete oligomers.

Interligand communication in a metal mediated LL'CT system - a case study

A series of oxo-Mo(iv) complexes, [MoO(Dt²⁻)(Dt⁰)] (where Dt²⁻ = benzene-1,2-dithiol (bdt), toluene-3,4-dithiol (tdt), quinoxaline-2,3-dithiol (qdt), or 3,6-dichloro-benzene-1,2-dithiol (bdtCl₂); Dt⁰ = N,N′-dimethylpiperazine-2,3-dithione (Me₂Dt⁰) or N,N′-diisopropylpiperazine-2,3-dithione (ⁱPr₂Dt⁰)), possessing a fully oxidized and a fully reduced dithiolene ligand have been synthesized and characterized. The assigned oxidation states of coordinated dithiolene ligands are supported with spectral and crystallographic data. The molecular structure of [MoO(tdt)(ⁱPr₂Dt⁰)] (6) demonstrates a large ligand fold angle of 62.6° along the S⋯S vector of the Dt⁰ ligand. The electronic structure of this system is probed by density functional theory (DFT) calculations. The HOMO is largely localized on the Dt²⁻ ligand while virtual orbitals are mostly Mo and Dt⁰ in character. Modeling the electronic spectrum of 6 with time dependent (TD) DFT calculations attributes the intense low energy transition at ∼18 000 cm⁻¹ to a ligand-to-ligand charge transfer (LL′CT). The electron density difference map (EDDM) for the low energy transition depicts the electron rich Dt²⁻ ligand donating charge density to the redox-active orbitals of the electron deficient Dt⁰ ligand. Electronic communication between dithiolene ligands is facilitated by a Mo-monooxo center and distortion about its primary coordination sphere.

The interligand communication between non-innocent dithiolene ligands of different oxidation states has been described in a Mo system. The fully reduced ene-dithiolate (Dt²⁻) acts as a donor moiety to the oxidized dithione (Dt⁰) in an LL′CT process.

Comparison of molybdenum and rhenium oxo bis-pyrazine-dithiolene complexes - in search of an alternative metal centre for molybdenum cofactor models

A pair of structurally precise analogues of molybdenum and rhenium complexes, [Et4N]/K2[MoO(prdt)2] and K[ReO(prdt)2] (prdt = pyrazine-2,3-dithiolene), were synthesized. These complexes serve as structural models for the active sites of bacterial molybdenum cofactor containing enzymes. They were comprehensively characterized and investigated by NMR, computationally supported IR and resonance Raman spectroscopy, cyclic voltammetry, mass spectrometry, elemental analysis and single-crystal X-ray diffraction. All compiled data are discussed in the context of comparing chemical and electronic structures and consequences thereof. This study constitutes the first investigation of a potential alternative Moco model system bearing rhenium as the central metal in an identical coordination environment to its molybdenum analogue. Structural evaluation revealed a slightly stronger M[double bond, length as m-dash]O bond in the rhenium complex in accordance with spectroscopic results, i.e. observed bond strengths. Thermodynamic parameters for the redox processes MoIV ↔ MoV and ReIV ↔ ReV were obtained by temperature dependent cyclic voltammetry. In contrast to molybdenum, rhenium loses entropy upon reduction and its redox potential is more temperature sensitive, indicating more significant differences than the respective diagonal relationship between the two metals in the periodic table might suggest and questioning rhenium's suitability as a functional artificial active site metal.

Acid-facilitated product release from a Mo(IV) center: relevance to oxygen atom transfer reactivity of molybdenum oxotransferases

We report that pyridinium ions (HPyr⁺) accelerate the conversion of [Tp*Mo^IVOCl(OPMe₃)] (1) to [Tp*Mo^IVOCl(NCCH₃)] (2) by 10³-fold, affording 2 in near-quantitative yield; Tp* = hydrotris(3,5-dimethyl-1-pyrazolyl)borate. This novel reactivity and the mechanism of this reaction were investigated in detail. The formation of 2 followed pseudo-first-order kinetics, with the observed pseudo-first-order rate constant (k _obs) linearly correlated with [HPyr⁺]. An Eyring plot revealed that this HPyr⁺-facilitated reaction has a small positive value of ∆S ^‡ indicative of a dissociative interchange (I_d) mechanism, different from the slower associative interchange (I_a) mechanism in the absence of HPyr⁺ marked with a negative ∆S ^‡. Interestingly, log(k _obs) was found to be linearly correlated to the acidity of substituted pyridinium ions. This novel reactivity is further investigated using combined DFT and ab initio coupled cluster methods. Different reaction pathways, including I_d, I_a, and possible alternative routes in the absence or presence of HPyr⁺, were considered, and enthalpy and free energies were calculated for each pathway. Our computational results further underscored that the I_d route is energetically favored in the presence of HPyr⁺, in contrast with the preferred I_a-NNO pathway in the absence of HPyr⁺. Our computational results also revealed molecular-level details for the HPyr⁺-facilitated I_d route. Specifically, HPyr⁺ initially becomes hydrogen-bonded to the oxygen atom of the Mo(IV)-OPMe₃ moiety, which lowers the activation barrier for the Mo-OPMe₃ bond cleavage in a rate-limiting step to dissociate the OPMe₃ product. The implications of our results were discussed in the context of molybdoenzymes, particularly the reductive half-reaction of sulfite oxidase.

Synthesis, characterization and oxygen atom transfer reactivity of a pair of Mo(iv)O- and Mo(vi)O2-enedithiolate complexes – a look at both ends of the catalytic transformation

A novel pair of mono-oxo and di-oxo bis-dithiolene molybdenum complexes were synthesized, characterized and catalytically investigated as models for a molybdenum dependent oxidoreductase.

A Model for the Active-Site Formation Process in DMSO Reductase Family Molybdenum Enzymes Involving Oxido-Alcoholato and Oxido-Thiolato Molybdenum(VI) Core Structures

New bis(ene-1,2-dithiolato)-oxido-alcoholato molybdenum(VI) and -oxido-thiolato molybdenum(VI) anionic complexes, denoted as [Mo(VI)O(ER)L2](-) (E = O, S; L = dimethoxycarboxylate-1,2-ethylenedithiolate), were obtained from the reaction of the corresponding dioxido-molybdenum(VI) precursor complex with either an alcohol or a thiol in the presence of an organic acid (e.g., 10-camphorsulfonic acid) at low temperature. The [Mo(VI)O(ER)L2](-) complexes were isolated and characterized, and the structure of [Mo(VI)O(OEt)L2](-) was determined by X-ray crystallography. The Mo(VI) center in [Mo(VI)O(OEt)L2](-) exhibits a distorted octahedral geometry with the two ene-1,2-dithiolate ligands being symmetry inequivalent. The computed structure of [Mo(VI)O(SR)L2](-) is essentially identical to that of [Mo(VI)O(OR)L2](-). The electronic structures of the resulting molybdenum(VI) complexes were evaluated using electronic absorption spectroscopy and bonding calculations. The nature of the distorted O(h) geometry in these [Mo(VI)O(EEt)L2](-) complexes results in a lowest unoccupied molecular orbital wave function that possesses strong π* interactions between the Mo(d(xy)) orbital and the cis S(p(z)) orbital localized on one sulfur donor from a single ene-1,2-dithiolate ligand. The presence of a covalent Mo-S(dithiolene) bonding interaction in these monooxido Mo(VI) compounds contributes to their low-energy ligand-to-metal charge transfer transitions. A second important d-p π bonding interaction derives from the ∼180° O(oxo)-Mo-E-C dihedral angle involving the alcoholate and thiolate donors, and this contributes to ancillary ligand contributions to the electronic structure of these species. The formation of [Mo(VI)O(OEt)L2](-) and [Mo(VI)O(SEt)L2](-) from the dioxidomolybdenum(VI) precursor may be regarded as a model for the active-site formation process that occurs in the dimethyl sulfoxide reductase family of pyranopterin molybdenum enzymes.

Behavior of anionic molybdenum(IV, VI) and tungsten(IV, VI) complexes containing bulky hydrophobic dithiolate ligands and intramolecular NH···S hydrogen bonds in nonpolar solvents

Molybdenum(IV, VI) and tungsten(IV, VI) complexes, (Et4N)2[M(IV)O{1,2-S2-3,6-(RCONH)2C6H2}2] and (Et4N)2[M(VI)O2{1,2-S2-3,6-(RCONH)2C6H2}2] (M = Mo, W; R = (4-(t)BuC6H4)3C), with bulky hydrophobic dithiolate ligands containing NH···S hydrogen bonds were synthesized. These complexes are soluble in nonpolar solvents like toluene, which allows the detection of unsymmetrical coordination structures and elusive intermolecular interactions in solution. The (1)H NMR spectra of the complexes in toluene-d8 revealed an unsymmetrical coordination structure, and proximity of the counterions to the anion moiety was suggested at low temperatures. The oxygen-atom-transfer reaction between the molybdenum(IV) complex and Me3NO in toluene was considerably accelerated in nonpolar solvents, and this increase was attributed to the favorable access of the substrate to the active center in the hydrophobic environment.

Deoxygenation of mono-oxo bis(dithiolene) Mo and W complexes by protonation

Protonation-assisted deoxygenation of a mono-oxo molybdenum center has been observed in many oxotransferases when the enzyme removes an oxo group to regenerate a substrate binding site. Such a reaction is reported here with discrete synthetic mono-oxo bis(dithiolene) molybdenum and tungsten complexes, the chemistry of which had been rarely studied because of the instability of the resulting deoxygenated products. An addition of tosylic acid to an acetonitrile solution of [Mo(IV)O(S2C2Ph2)2](2-) (1) and [W(IV)O(S2C2Ph2)2](2-) (2) results in the loss of oxide with a concomitant formation of novel deoxygenated complexes, [M(MeCN)2(S2C2Ph2)2] (M = Mo (3), W (4)), that have been isolated and characterized. Whereas protonation of 1 exclusively produces 3, two different reaction products can be generated from 2; an oxidized product, [WO(S2C2Ph2)2](-), is produced with 1 equiv of acid while a deoxygenated product, [W(MeCN)2(S2C2Ph2)2] (4), is generated with an excess amount of proton. Alternatively, complexes 3 and 4 can be obtained from photolysis of [Mo(CO)2(S2C2Ph2)2] (5) and [W(CO)2(S2C2Ph2)2] (6) in acetonitrile. A di- and a monosubstituted adducts of 3, [Mo(CO)2(S2C2Ph2)2] (5) and [Mo(PPh3)(MeCN)(S2C2Ph2)2] (7) are also reported.

The electronic nature of terminal oxo ligands in transition-metal complexes: ambiphilic reactivity of oxorhenium species

The synthesis of the Lewis acid-base adducts of B(C6F5)3 and BF3 with [DAAmRe(O)(X)] DAAm = N,N-bis(2-arylaminoethyl)methylamine; aryl = C6F5 (X = Me, 1, COCH3, 2, Cl, 3) as well as their diamidopyridine (DAP) (DAP=(2,6-bis((mesitylamino)methyl)pyridine) analogues, [DAPRe(O)(X)] (X = Me, 4, Cl, 5, I, 6, and COCH3,7), are described. In these complexes the terminal oxo ligands act as nucleophiles. In addition we also show that stoichiometric reactions between 3 and triarylphosphine (PAr3) result in the formation of triarylphosphine oxide (OPAr3). The electronic dependence of this reaction was studied by comparing the rates of oxygen atom transfer for various para-substituted triaryl phosphines in the presence of CO. From these experiments a reaction constant ρ = -0.29 was obtained from the Hammett plot. This suggests that the oxygen atom transfer reaction is consistent with nucleophilic attack of phosphorus on an electrophilic metal oxo. To the best of our knowledge, these are the first examples of mono-oxo d(2) metal complexes in which the oxo ligand exhibits ambiphilic reactivity.

Selective and effective stabilization of Mo(VI)═O bonds by NH···S hydrogen bonds via trans influence

A monooxomolybdenum(IV) complex containing two intramolecular NH···S hydrogen bonds, (NEt(4))(2)[Mo(IV)O(1,2-S(2)-3-t-BuNHCOC(6)H(3))(2)], was synthesized. The trans isomer was crystallized as the major product, and the molecular structure was determined by X-ray analysis. The trans isomer was isomerized by heating in solution to give a 1:1 mixture of trans and cis isomers. Oxidation of these isomers by Me(3)NO afforded (NEt(4))(2)[Mo(VI)O(2)(1,2-S(2)-3-t-BuNHCOC(6)H(3))(2)]. (1)H NMR analysis revealed that the dioxomolybdenum(VI) complex existed as a single isomer where both oxo ligands were trans to each of the two hydrogen-bonded thiolate ligands. The Mo(VI)═O bond was effectively stabilized by the NH···S hydrogen bond via trans influence, which was determined using resonance Raman spectroscopy. These results were supported by preliminary density functional theory calculations.

Dioxomolybdenum(VI) complexes with ene-1,2-dithiolate ligands: synthesis, spectroscopy, and oxygen atom transfer reactivity

New dioxomolybdenum(VI) complexes, (Et(4)N)(Ph(4)P)[Mo(VI)O(2)(S(2)C(2)(CO(2)Me)(2))(bdt)] (2) and (Et(4)N)(Ph(4)P)[Mo(VI)O(2)(S(2)C(2)(CO(2)Me)(2))(bdtCl(2))](4)(S(2)C(2)(CO(2)Me)(2) = 1,2-dicarbomethoxyethylene-1,2-ditholate, bdt = 1,2-benzenedithiolate, bdtCl(2) = 3,6-dichloro-1,2-benzenedithiolate), that possess at least one ene-1,2-dithiolate ligand were synthesized by the reaction of their mono-oxo-molybdenum(IV) derivatives, (Et(4)N)(2)[Mo(IV)O(S(2)C(2)(CO(2)Me)(2))(bdt)] (1) and (Et(4)N)(2)[Mo(IV)O(S(2)C(2)(CO(2)Me)(2))(bdtCl(2))] (3), with Me(3)NO. Additionally, the bis(ene-1,2-dithiolate)Mo(VI)O(2) complex, (Et(4)N)(Ph(4)P)[Mo(VI)O(2)(S(2)C(2)(CO(2)Me)(2))(2)] (6), was isolated. Complexes 2, 4, and 6 were characterized by elemental analysis, negative-ion ESI mass spectrometry, and IR spectroscopy. X-ray analysis of 4 and 6 revealed a Mo(VI) center that adopts a distorted octahedral geometry. Variable-temperature (1)H NMR spectra of (CD(3))(2)CO solutions of the Mo(VI)O(2) complexes indicated that the Mo centers isomerize between Delta and Lambda forms. The electronic structures of 2, 4, and 6 have been investigated by electronic absorption and resonance Raman spectroscopy and bonding calculations. The results indicate very similar electronic structures for the complexes and considerable pi-delocalization between the Mo(VI)O(2) and ene-1,2-dithiolate units. The similar oxygen atom transfer kinetics for the complexes results from their similar electronic structures.

Which functional groups of the molybdopterin ligand should be considered when modeling the active sites of the molybdenum and tungsten cofactors? A density functional theory study

A density functional theory study of the influence of the various functional groups of the molybdopterin ligand on electronic and geometric properties of active-site models for the molybdenum and tungsten cofactors has been undertaken. We used analogous molybdenum and tungsten complexes with increasingly accurate representation of the molybdopterin ligands and compared bond lengths, angles, charge distribution, composition of the binding orbitals, as well as the redox potentials in relation to each other. On the basis of our findings, we suggest using ligand systems including the pyrane and the pyrazine rings, besides the dithiolene function, to obtain sufficiently reliable computational, but also synthetic, models for the molybdenum and tungsten cofactors, whereas the second ring of the pterin might be neglected for efficiency reasons.

Chemical analogues relevant to molybdenum and tungsten enzyme reaction centres toward structural dynamics and reaction diversity

Recent characterisation of molybdenum and tungsten enzymes revealed novel structural types of reaction centres, as well as providing new subjects of interest as synthetic chemical analogues. This tutorial review highlights the structure/reactivity relationships of the enzyme reaction centres and chemical analogues. Chemical analogues for the oxygen atom transfer enzymes have been well expanded in structure and reactivity. Other types of chemical analogues that exhibit different coordination chemistry have recently been presented for reaction centres of the hydroxylation and dehydrogenation enzymes and others.

Synthesis, electrochemistry, geometric and electronic structure of oxo-molybdenum compounds involved in an oxygen atom transferring system

The oxygen atom transfer reactivity of Tp( *)MoO(2)(SPh) (1) (where Tp( *)=hydrotris-(3,5-dimethylpyrazol-1-yl)borate) with trimethyl phosphine (PMe(3)) has been investigated. The reaction proceed through a diamagnetic phosphoryl intermediate complex, Tp( *)MoO(SPh)(OPMe(3)) (2), which has been isolated and characterized by IR, NMR, UV-visible spectroscopy, and mass spectrometry. The molecular structure of 2 has been determined by X-ray crystallography. The complex crystallizes in monoclinic (P2(1)/n) space group, a=19.81 (1)A, b=11.1 (4)A, c=18.416 (5)A, beta=121.2 (3) degrees , V=3463.8 (25)A(3) with Z=4. In acetonitrile, complex 2 exchanges its phosphoryl ligand with a solvent molecule resulting in Tp( *)MoO(SPh)(MeCN) (3), which has been isolated and also characterized spectroscopically and by X-ray crystallography. Compound 3 crystallizes in triclinic (P1 ) space group, a=10.159 (6)A, b=18.563 (5)A, c=7.986 (3)A, alpha=96.22 (3) degrees , beta=121.2 (3) degrees , gamma=84.64 (3) degrees , V=1452.4 (11)A(3) with Z=2. The electronic structures of the complexes have been investigated by density functional theory and the redox chemistry has been investigated by cyclic and differential pulse voltammetry. In acetonitrile, complex 2 spontaneously transforms to complex, 3 at a rate of 5.6x10(-4)s(-1).

In Situ Generation of Oxo−sulfidobis(dithiolene)tungsten(VI) Complexes: Active-Site Models for the Aldehyde Ferredoxin Oxidoreductase Family of Tungsten Enzymes

Oxo-sulfidobis(dithiolene)tungsten(VI) complexes were prepared in situ by the reaction of oxobis(dithiolene)tungsten(V) precursors with hydrosulfide (SH-). The complexes, characterized by UV-vis, electrospray ionization mass spectrometry, IR, and resonance Raman spectroscopies, model the proposed coordination environment and observed hydrolytic reactions of members of the aldehyde ferredoxin oxidoreductase family of tungsten enzymes.