Hyperpolarized 129Xe NMR investigation of multifunctional organic/inorganic hybrid mesoporous silica materials

129Xe: A Wide-Ranging NMR Probe for Multiscale Structures

Porous materials are ubiquitous systems with a large variety of applications from catalysis to polymer science, from soil to life science, from separation to building materials. Many relevant systems of biological or synthetic origin exhibit a hierarchy, defined as spatial organization over several length scales. Their characterization is often elusive, since many techniques can only be employed to probe a single length scale, like the nanometric or the micrometric levels. Moreover, some multiscale systems lack tridimensional order, further reducing the possibilities of investigation. 129Xe nuclear magnetic resonance (NMR) provides a unique and comprehensive description of multiscale porous materials by exploiting the adsorption and diffusion of xenon atoms. NMR parameters like chemical shift, relaxation times, and diffusion coefficient allow the probing of structures from a few angstroms to microns at the same time. Xenon can evaluate the size and shape of a variety of accessible volumes such as pores, layers, and tunnels, and the chemical nature of their surface. The dynamic nature of the probe provides a simultaneous exploration of different scales, informing on complex features such as the relative accessibility of different populations of pores. In this review, the basic principles of this technique will be presented along with some selected applications, focusing on its ability to characterize multiscale materials.

Mechanisms and Beyond: Elucidation of Fluxional Dynamics by Exchange NMR Spectroscopy

Detailed mechanistic information is crucial to our understanding of reaction pathways and selectivity. Dynamic exchange NMR techniques, in particular 2D exchange spectroscopy (EXSY) and its modifications, provide indispensable intricate information on the mechanisms of organic and inorganic reactions and other phenomena, for example, the dynamics of interfacial processes. In this Review, key results from exchange NMR studies of small molecules over the last few decades are systemised and discussed. After a brief introduction to the theory, the key types of dynamic processes are identified and fundamental examples given of intra- and intermolecular reactions, which, in turn, could involve, or not, bond-making and bond-breaking events. Following that logic, internal molecular rotation, intramolecular stereomutation and molecular recognition will first be considered because they do not typically involve bond breaking. Then, rearrangements, substitution-type reactions, cyclisations, additions and other processes affecting chemical bonds will be discussed. Finally, interfacial molecular dynamics and unexpected combinations of different types of fluxional processes will also be highlighted. How exchange NMR spectroscopy helps to identify conformational changes, coordination and molecular recognition processes as well as quantify reaction energy barriers and extract detailed mechanistic information by using reaction rate theory in conjunction with computational techniques will be shown.

Exploring Local Disorder within CAU-1 Frameworks Using Hyperpolarized 129Xe NMR Spectroscopy

The sorption properties of metal-organic frameworks (MOFs) can be influenced by introducing covalently attached functional side chains, which make this subclass of porous materials promising for applications as diverse as gas storage and separation, catalysis, and drug delivery. The incorporation of side groups usually comes along with disorder, as the synthesis procedures rarely allow for one specific position among a larger group of equivalent sites to be selected. For a series of isoreticular CAU-1 frameworks, chosen as model compounds, one out of four positions at every linker is modified with equal probability. Here, we investigate the influence of this disorder on Ar sorption and ¹²⁹Xe nuclear magnetic resonance spectroscopy using hyperpolarized ¹²⁹Xe gas. Models used for predicting the pore dimensions as well as their distributions were derived from the unfunctionalized framework by replacing one proton at every linker with either an amino, an acetamide, or a methyl urea functionality. The resulting structures were optimized using density functional theory (DFT) calculations. Results from void analyses and Monte Carlo force field simulations suggest that for available Ar nonlocal DFT (NLDFT) kernels, neither the pore dimensions nor the distributions induced by the side-chain disorder are well-reproduced. By contrast, we found the ¹²⁹Xe chemical shift analysis for the shift observed at high temperature to be well-suited to develop a detailed fingerprint of the porosity and side-chain disorder within the isoreticular CAU-1 series. After calibrating the ¹²⁹Xe limiting shift of the amino-functionalized framework with DFT calculations, the downfield shifts for the other two derivatives are an excellent measure for the reduction of the accessible pore space and reveal a strong preference for the side chains toward the octahedral voids for both cases. We expect that the strategy presented here can be commonly applied to disorder phenomena within MOFs in the future.

Porosity of pillared clays studied by hyperpolarized 129Xe NMR spectroscopy and Xe adsorption isotherms

The influence of the layer charge on the microstructure was studied for a series of three hybrid pillared interlayered clays based on the organic dication Me(2)DABCO(2+) and charge reduced synthetic fluorohectorites. To get a detailed picture of the local arrangements within the interlayer space, multinuclear solid-state NMR spectroscopy was performed in conjunction with high-resolution (129)Xe MAS NMR, temperature-dependent wide-line 1D and 2D (129)Xe NMR, and Ar/Ar(l) and Xe/Xe(l) physisorption measurements. The resulting layer charge (x) for the three samples are 0.48, 0.44, and 0.39 per formula unit (pfu). The samples exhibit BET equivalent surfaces between 150 and 220 m(2)/g and pore volumes which increase from 0.06 to 0.11 cm(3)/g while the layer charge reduces. 1D and 2D (1)H, (13)C, (19)F, and (29)Si MAS data reveal that the postsynthetic charge reduction induces regions with higher defect concentrations within the silicate layers. Although the pillars tend to avoid these defect-rich regions, a homogeneous and regular spacing of the Me(2)DABCO(2+) pillars is established. Both the Ar/Ar(l) physisorption and (129)Xe NMR measurements reveal comparable pore dimensions. The trend of the temperature-dependent wide-line (129)Xe spectra as well as the exchange in the EXSY spectra is typical for a narrow 2D pore system. (129)Xe high-resolution experiments allow for a detailed description of the microstructure. For x = 0.48 a bimodal distribution with pore diameters between 5.9 and 6.4 Å is observed. Reducing the layer charge leads to a more homogeneous pore structure with a mean diameter of 6.6 Å (x = 0.39). The adsorption enthalpies ΔH(ads) determined from the temperature-dependent (129)Xe chemical shift data fit well to the ones derived from the Xe/Xe(l) physisorption measurements in the high-pressure limit while the magnitude of ΔH(ads) in the low-pressure limit is significantly larger. Thus, the (129)Xe data are influenced by adsorbate-adsorbent as well as adsorbate-adsorbate interactions.

Cooperative acid-base effects with functionalized mesoporous silica nanoparticles: applications in carbon-carbon bond-formation reactions

Acid-base bifunctional mesoporous silica nanoparticles (MSN) were prepared by a one-step synthesis by co-condensation of tetraethoxysilane (TEOS) and silanes possessing amino and/or sulfonic acid groups. Both the functionality and morphology of the particles can be controlled. The grafted functional groups were characterized by using solid-state (29)Si and (13)C cross-polarization/magic angle spinning (CP/MAS) NMR spectroscopy, thermal analysis, and elemental analysis, whereas the structural and the morphological features of the materials were evaluated by using XRD and N(2) adsorption-desorption analyses, and SEM imaging. The catalytic activities of the mono- and bifunctional mesoporous hybrid materials were evaluated in carbon-carbon coupling reactions like the nitroaldol reaction and the one-pot deacetalization-nitroaldol and deacetalization-aldol reactions. Among all the catalysts evaluated, the bifunctional sample containing amine and sulfonic acid groups (MSN-NNH(2)-SO(3)H) showed excellent catalytic activity, whereas the homogeneous catalysts were unable to initiate the reaction due to their mutual neutralization in solution. Therefore a cooperative acid-base activation is envisaged for the carbon-carbon coupling reactions.

Vibrational Study on the Local Structure of Post-Synthesis and Hybrid Mesoporous Materials: Are There Fundamental Distinctions?

Organic-inorganic mesoporous materials of the MCM-41 type are important materials that can be prepared by either post-synthesis or one-pot synthesis procedures. A complete control of the characteristics at a local level is of the utmost importance in view of the applications of such materials. However, there are not many studies relating such features with synthetic approaches. In this work, we prepared samples by post-synthesis derivatization of materials from Si-based MCM-41, with bidentate nitrogen ligands bearing one or two silylated arms, and by one-pot synthesis of organic-inorganic hybrid materials. The bulk properties of the two kinds of materials were comparable. Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy and Raman spectroscopy were used to investigate the local environment, namely, the number of OH groups and distribution of SiO(4) units (large and small ring units). Hydrophilicity correlates with both the type of organic moiety used (mono- or disilylated), as well as with the synthetic procedure. The same vibrational studies showed how the structure in the channels changes as a function of pressure, reflecting the low mechanical stability of the mesoporous materials.