Preparation of layered double hydroxides and their applications as additives in polymers, as precursors to magnetic materials and in biology and medicine

Enhanced Gas Barrier and Mechanical Properties of Styrene-Butadiene Rubber Composites by Incorporating Electrostatic Self-Assembled Graphene Oxide @ Layered Double Hydroxide Hybrids

Rubber composites with a high gas barrier and mechanical properties have received considerable attention due to their potential applications. Constructing complex filler networks in a rubber matrix is an effective strategy to simultaneously enhance the gas barrier and mechanical properties. In this work, graphene oxide layered double hydroxide (GO@LDHs) hybrids were obtained by the electrostatic self-assembly method. A unique interspersed and isolated structure was formed in GO@LDHs hybrids due to the chemical interactions between the functional groups on GO sheets and the metal cations on LDH layers. Subsequently, the GO@LDHs hybrids were incorporated into a styrene-butadiene rubber (SBR) matrix using a green latex compounding method. The results showed that the GO@LDHs hybrids were uniformly embedded in the SBR matrix, constructing an overlapped filler network and forming physical bonding points that reduced the free volume of the composites. The electrostatic interactions between GO@LDHs hybrids facilitated energy dissipation during stretching, thereby improving the mechanical performance of the rubber composites. More importantly, the N2 gas permeability and fracture toughness of GO@LDHs/SBR composites decreased by 52.2% and increased by 845%, respectively, compared to those of a pure SBR matrix. The construction of GO@LDHs hybrids offers new insights for designing rubber composites with a high gas barrier and mechanical properties.

A General and Highly Versatile Heterogeneous Pd-Catalyzed Oxidative Aminocarbonylation of Alkynes with Aromatic and Aliphatic Amines

An efficient heterogeneous catalytic system for the oxidative aminocarbonylation of alkynes and amines in the presence of CO/O2 to afford substituted propiolamides has been developed. The active nanocatalyst, [Pd/Mg3Al-LDH]-300(D), is composed by Pd nanoaggregates (2-3 nm average particle size) stabilized over a partially dehydrated [Mg3Al-LDH] matrix. The methodology has resulted widely applicable, being the first catalytic system, either homogeneous or heterogeneous, able to activate not only aliphatic amines but also poorly-nucleophilic aromatic amines. In fact, >60 substituted propiolamides have been synthesized in good to excellent isolated yields through this methodology, being 27 novel compounds. An important characterization effort (XRD, 27Al MAS NMR, TGA, TPD-CO2, BET area, XPS, HAADF-HRSTEM and HRTEM) and optimization of the synthesis conditions of the optimal catalyst has been performed. This study, together with a series of kinetic and mechanistic essays, indicates that the optimal catalyst is composed by Pd(0) species stabilized in a partially dehydrated/dehydroxylated LDH material with a Mg/Al molar ratio of 3 and a small crystallite size. All the experimental data indicates that the in situ formation of [PdI2] active species in the material surface together with the presence of a matrix with the optimal acid/base properties are key aspects of this process.

Hygroscopic Mg-Al LDHs composite microspheres for highly efficient hyperspectral camouflage in the VIS and NIR wavebands

In order to enhance the hyperspectral camouflage efficacy of stealth coatings against a natural vegetative backdrop, LiCl, known for its significant hygroscopic properties, was incorporated into green Mg-Al layered double hydroxide (Mg-Al LDHs) material. Micron-sized composite microspheres were subsequently synthesized via the spray-drying granulation technique. The structure, morphology, and chemical composition of these microspheres were thoroughly characterized by X-ray diffraction, scanning electron microscopy, laser particle size analysis, nitrogen adsorption-desorption isotherms, and Fourier-transform infrared spectroscopy. The effect of LiCl content on the moisture absorption capacity and near-infrared reflectance spectra of the microspheres was systematically evaluated. We found that incorporating an optimal amount of LiCl into the internal pores of the Mg-Al LDHs microspheres did not compromise their smooth surface morphology and uniform particulate distribution. Notably, when the LiCl content was 10%, the maximum saturation moisture uptake ratio of the coating increased to 0.75 g/g. This hygroscopicity significantly enhanced the absorption and scattering of near-infrared radiation by the coating while concurrently improving its ability to modulate the shape and reflectance of both the visible and near-infrared spectral curves. Spectral congruence between the synthetic coating and natural green foliage was quantified at 97.41%. Moreover, this performance was maintained over 10 cycles of programmed drying and re-humidification, and the coating consistently demonstrated stable hygroscopic properties and sustained over 95% spectral congruence. These optimized artificial coatings were found to effectively confuse hyperspectral classification algorithms, thus blending seamlessly into a natural foliage backdrop. This study provides a new method for regulating VIS and NIR spectral (visible-near infrared spectrum) features, which will be critical for applications in advanced hyperspectral camouflage materials.

Progress in layered double hydroxides (LDHs): Synthesis and application in adsorption, catalysis and photoreduction

Layered double hydroxides (LDHs), also known as anionic clays, have attracted significant attention in energy and environmental applications due to their exceptional physicochemical properties. These materials possess a unique structure with surface hydroxyl groups, tunable properties, and high stability, making them highly desirable. In this review, the synthesis and functionalization of LDHs have been explored including co-precipitation and hydrothermal methods. Furthermore, extensive research on LDH application in toxic pollutant removal has shown that modifying or functionalizing LDHs using materials such as activated carbon, polymers, and inorganics is crucial for achieving efficient pollutant adsorption, improved cyclic performance, as well as effective catalytic oxidation of organics and photoreduction. This study offers a comprehensive overview of the progress made in the field of LDHs and LDH-based composites for water and wastewater treatment. It critically discusses and explains both direct and indirect synthesis and modification techniques, highlighting their advantages and disadvantages. Additionally, this review critically discusses and explains the potential of LDH-based composites as absorbents. Importantly, it focuses on the capability of LDH and LDH-based composites in heterogeneous catalysis, including the Fenton reaction, Fenton-like reactions, photocatalysis, and photoreduction, for the removal of organic dyes, organic micropollutants, and heavy metals. The mechanisms involved in pollutant removal, such as adsorption, electrostatic interaction, complexation, and degradation, are thoroughly explained. Finally, this study outlines future research directions in the field.

Interaction of 2D nanomaterial with cellular barrier: Membrane attachment and intracellular trafficking

The cell membrane serves as a barrier against the free entry of foreign substances into the cell. Limited by factors such as solubility and targeting, it is difficult for some drugs to pass through the cell membrane barrier and exert the expected therapeutic effect. Two-dimensional nanomaterial (2D NM) has the advantages of high drug loading capacity, flexible modification, and multimodal combination therapy, making them a novel drug delivery vehicle for drug membrane attachment and intracellular transport. By modulating the surface properties of nanocarriers, it is capable of carrying drugs to break through the cell membrane barrier and achieve precise treatment. In this review, we review the classification of various common 2D NMs, the primary parameters affecting their adhesion to cell membranes, and the uptake mechanisms of intracellular transport. Furthermore, we discuss the therapeutic potential of 2D NMs for several major disorders. We anticipate this review will deepen researchers' understanding of the interaction of 2D NM drug carriers with cell membrane barriers, and provide insights for the subsequent development of novel intelligent nanomaterials capable of intracellular transport.

Synthesis and application of waste-based layered double hydroxide: A review

The synthesis of layered double hydroxide (LDH) from industrial wastes is a sustainable approach to aid circular economy and hazardous material disposal. In this review, the researches on the synthesis and application of waste-based LDH from 2010 to 2023 are summarized and discussed. At present, there are mainly four types of waste-based LDH produced from red mud, slag, fly ash and wastewater, with co-precipitation being the most typical synthesis method. Red mud is used as the trivalent metal source supplemented by chemical reagents or other types of waste as divalent metal source to produce red mud-based LDH. Slag can act as the sole metal source providing both divalent and trivalent metal sources for slag-based LDH. Fly ash was used either as the trivalent metal source or both divalent and trivalent metal sources to produce fly ash-based LDH. Wastewater-based LDH was typically synthesized by in-situ co-precipitation method to achieve the self-purification of wastewater. The impurities in waste-based LDH can act as a two-edged weapon. It may either hinder or promote the performance of waste-based LDH. The challenge in the synthesis of waste-based LDH lies in the efficient extraction of available metals. The future research prospects for waste-based LDH are suggested.

Adsorption of anionic dye from aqueous environment using surface-engineered Zn/Cu hydroxy double salt-based material: mechanistic, equilibrium and kinetic studies

Herein, ethylene glycol (EG)-modified Zn/Cu hydroxy double salts (HDS) were synthesized using a facile synthetic approach. The formation of layered structure and presence of EG in the interlayer region were confirmed using PXRD and FTIR techniques. Furthermore, XPS analysis was used to confirm presence of metal ions in synthesized HDS. The surface area and pore size diameter of the HDS was found to be 32.30 m2 g-1 and 2.22 nm, respectively, using BET. The role of HDS was evaluated for its potential application as a sorbent for Congo red (CR) dye uptake. Batch studies were conducted to examine the impact of key variables, i.e., pH, time, adsorbent dosage and dye concentration on adsorption efficiency of HDS. Linear-nonlinear isotherm and kinetic models were employed for detailed analysis of experimental data. Langmuir, Freundlich and Temkin isotherm models were subsequently utilized to fit equilibrium data, among which Langmuir demonstrated to be most accurate. The maximum monolayer adsorption capacity estimated using Langmuir model was computed to be 181.81 mg g-1. The kinetic data follows pseudo-second-order model having good R2 value (0.999). Additionally, thermodynamic study suggested spontaneous and endothermic nature of adsorption process having reusability up to 5 cycles with removal efficiency more than 85%.

Layered Double Hydroxides: A Novel Promising 2D Nanomaterial for Bone Diseases Treatment

Bone diseases including bone defects, bone infections, osteoarthritis, and bone tumors seriously affect life quality of the patient and bring serious economic burdens to social health management, for which the current clinical treatments bear dissatisfactory therapeutic effects. Biomaterial-based strategies have been widely applied in the treatment of orthopedic diseases but are still plagued by deficient bioreactivity. With the development of nanotechnology, layered double hydroxides (LDHs) with adjustable metal ion composition and alterable interlayer structure possessing charming physicochemical characteristics, versatile bioactive properties, and excellent drug loading and delivery capabilities arise widespread attention and have achieved considerable achievements for bone disease treatment in the last decade. However, to the authors' best knowledge, no review has comprehensively summarized the advances of LDHs in treating bone disease so far. Herein, the advantages of LDHs for orthopedic disorders treatment are outlined and the corresponding state-of-the-art achievements are summarized for the first time. The potential of LDHs-based nanocomposites for extended therapeutics for bone diseases is highlighted and perspectives for LDHs-based scaffold design are proposed for facilitated clinical translation.

Silver Supported Nanoparticles on [Mg4 Al-LDH] as an Efficient Catalyst for the α-Alkylation of Nitriles, Oxindoles and Other Carboxylic Acid Derivatives with Alcohols

An efficient heterogeneous silver-catalyzed α-alkylation of nitriles and oxindoles using alcohols via borrowing hydrogen strategy has been developed for the first time. The active nanostructured material, namely [Ag/Mg4 Al-LDH], composed by silver nanoparticles (3-4 nm average particle size) homogeneously stabilized onto a [Mg4 Al-LDH] support with suitable Brønsted basic properties, constitutes a stable catalyst for the sustainable building of novel C-C bonds from alcohols and C-nucleophiles. By applying this catalyst, a broad range of α-functionalized nitriles and oxindoles has been accessed with good to excellent isolated yields and without the addition of external bases. Moreover, the novel silver nanocatalyst has also demonstrated its successful application to the cyclization of N-[2-(hydroxymethyl)phenyl]-2-phenylacetamides to afford 3-arylquinolin-2(1H)-ones, through a one-pot dehydrogenation and intramolecular α-alkylation. Control experiments, kinetic studies, and characterization data of a variety of [Ag/LDH]-type materials confirmed the silver role in the dehydrogenation and hydrogenation steps, while [Mg4 Al-LDH] matrix is able to catalyze condensation. Interestingly, these studies suggest as key point for the successful activity of [Ag/Mg4 Al-LDH], in comparison with other [Ag/LDH]-type nanocatalysts, the suitable acid-base properties of this material.

Magnetic layered double hydroxides for the sensitive dispersive solid phase microextraction of hippuric acid in urine samples prior to HPLC-UV analysis

The core- shell structural layered double hydroxide (Fe₃O₄-SiO₂-EN@Zn-Al-LDH) was successfully synthesized and applied as a solid sorbent in the magnetic dispersive micro solid-phase-extraction (M-DµSPE) method. It was combined with high-performance liquid chromatography for the trace analysis of hippuric acid (HA) from urine samples. The obtained magnetic layered double hydroxides (LDHs) were characterized by XRD, FT-IR, VSM, FE-SEM, and BET techniques. The characterization analysis indicated that Fe₃O₄- SiO₂- EN@ Zn-Al-LDH has a sufficient surface area and good saturation magnetism. The affecting variables on the extraction of HA by the proposed method were optimized. Excellent adsorption capacity (127.8 mg g^-1), wide linearity dynamic range (0.015-500 µg mL^-1), and satisfactory limits of detection and quantification (0.055 and 0.014 µg mL^-1, respectively) could be obtained under optimum conditions. The good repeatability and low relative standard deviation (7.2 %), low carry-over (2.7%), good matrix effect (93.6%), high reusability (up to 19 times), and an acceptable percent recovery value (97.2%) proved the selectivity and applicability of the proposed method for the extraction of the trace levels of HA in real urine samples.

Facile fabrication of a 2D/2D CoFe-LDH/g-C3N4 nanocomposite with enhanced photocatalytic tetracycline degradation

The widespread use of tetracycline (TC) in medicine and agriculture has caused severe pollution problems in the environment. In this work, a nanocomposite comprising of CoFe-layered double hydroxides grown on graphitic carbon nitride nanosheets (CoFe-LDH/g-C₃N₄) with a notable two-dimensional/two-dimensional (2D/2D) heterostructure was synthesized through a facile co-precipitation method. The CoFe-LDH/g-C₃N₄ nanocomposite displayed significantly improved visible-light-driven photocatalytic activity towards TC degradation, compared to pristine g-C₃N₄ and CoFe-LDH alone. The enhanced activation efficiency was a result of intimate interfacial contact, enlarged the surface area, broadened visible-light absorbance, and enhanced photogenerated electron transfer. The scavenging experiments showed that holes (h⁺) and superoxide radical anions (‧O₂^-) played a crucial role in TC degradation. Factors including the type of TCs, initial concentration of TC, presence of ions, and the type of water matrix were investigated to evaluate the practical feasibility of the nanocomposites for TC removal from antibiotics-contaminated water. The repeated tests showed that the nanocomposites possessed good stability and recyclability. This study demonstrated the feasibility of achieving photocatalytic activity enhancement of g-C₃N₄ through the formation of a 2D-2D heterostructure between LDHs and g-C₃N₄.

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Mg-LDH Nanoclays Intercalated Fennel and Green Tea Active Ingredient: Field and Laboratory Evaluation of Insecticidal Activities against Culex pipiens and Their Non-Target Organisms

(1) Background: Mosquito control with essential oils is a growing demand. This work evaluated the novel larvicidal and adulticidal activity of fennel and green tea oils and their Layered double hydroxides (LDHs) nanohybrid against Culex pipiens (Cx. pipiens) in both laboratory and field conditions and evaluated their effect against non-target organisms; (2) Methods: Two types of nanoclays, MgAl-LDH and NiAl-LDH were synthesized and characterized using PXRD, TEM and SEM, whereas their elemental analysis was accomplished by SEM-EDX; (3) Results: Mg and Ni LDHs were synthesized by the co-precipitation method. The adsorption and desorption of active ingredients were conducted using LC MS/MS, with reference to the SEM-EXD analysis. The desorption process of MgAl-LDH intercalated green tea oil was conducted using ethanol, and reveled significant peaks related to polyphenols and flavonoids like Vanillin, Catechin, Daidzein, Ellagic acid, Naringenin, Myricetin and Syringic acid with concentrations of 0.76, 0.73, 0.67, 0.59, 0.52, 0.44 and 0.42 μg/g, respectively. The larvicidal LC50 values of fennel oil, Mg-LDH-F, and Ni-LDH-F were 843.88, 451.95, 550.12 ppm, respectively, whereas the corresponding values of green tea were 938.93, 530.46, and 769.94 ppm. The larval reduction percentage of fennel oil and Mg-LDH-F reached 90.1 and 96.2%, 24 h PT and their persistence reached five and seven days PT, respectively. The reduction percentage of green tea oil and Mg-LDH-GT reached 88.00 and 92.01%, 24 h PT and their persistence reached five and six days PT, respectively. Against adults, Mg-LDH-GT and Ni-LDH-GT were less effective than green tea oil as their LC95 values were 5.45, 25.90, and 35.39%, respectively. The reduction in adult density PT with fennel oil, Mg-LDH-F, green tea oil, and Mg-LDH-GT reached 83.1, 100, 77.0, and 99.0%, respectively, 24 h PT and were effective for three days. Mg-LDH-GT and Mg-LDH-F increased the predation Cybister tripunctatus (71% and 69%), respectively; (4) Conclusions: For the first time, Mg-LDH-GT and Mg-LDH-F was the best system loaded with relatively good desorption release to its active ingredients and significantly affected Cx. pipiens larvae and adults in both laboratory and field circumstances, and it could be included in mosquito control.

CaFe-Based Layered Double Oxides With Superior Iron Alloy Corrosion Inhibition Behaviors in Aggressive Seawater Environment

Reinforced concrete is among the most multifaceted materials used in the construction field. Maintaining the resistance of reinforced concrete to weathering, abrasion, and chemical attack, particularly in aggressive natural conditions such as seawater environments, is challenging. The main factor in the degradation of reinforced-concrete durability is chloride penetration, which accelerates iron alloy corrosion and facilitates structural degradation. In this study, calcium-iron-based layered double hydroxides (CaFe-LDHs) were fabricated at room temperature, followed by structural modulation, and their effectiveness in mitigating iron alloy corrosion due to chloride ions (in 3.5 wt% of NaCl) was investigated. The synthesized CaFe-LDHs with phase transfer notably improved the Cl⁻ removal capacity (Q_max) to 881.83 mg/g, which is more than three times that reported based on previous studies. The novelty of this research lies in the sophisticated structural and phase transformations of the as-synthesized CaFe-LDHs, determination of crucial factors for chloride ion removal, and suggestion of calcium-iron-based layered double oxide (CaFe-LDO)-based chloride ion removal mechanisms considering chemical and ion-exchange reactions. Moreover, when the phase-transformed LDHs, C-700 LDOs, were applied to inhibit iron alloy corrosion, a noticeable inhibition efficiency of 98.87% was obtained, which was an 11-fold improvement compared to the case of iron alloys without LDOs. We believe this work can provide new insights into the design of CaFe-LDOs for the enhancement of the lifespan of reinforced concrete structures.

The Application of Response Surface Methodology for 2,4,6-Trichlorophenol Removal from Aqueous Solution Using Synthesized Zn2+-Al3+-Tartrate Layered Double Hydroxides

Trichlorophenols are on the US environmental protection agency’s list of priority pollutants due to their serious damage to water safety. With the aim of adsorbing the 2,4,6-trichlorophenol (2,4,6-TCP), Zn2+-Al3+-tartrate layered double hydroxides (Zn2+-Al3+-C4H4O62−-LDHs) adsorbent was synthesized via homogeneous precipitation method. X-ray powder diffraction (XRD), Fourier infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) were used to characterize Zn2+-Al3+-C4H4O62−-LDHs. The concentration of 2,4,6-TCP was determined using gas chromatography–mass spectrometry (GC-MS). Zn2+-Al3+-C4H4O62−-LDHs exhibited a good adsorption performance of 2,4,6-trichlorophenol, since a bigger layer spacing of Zn2+-Al3+-C4H4O62−-LDHs was obtained than that in Zn2+-Al3+-CO32−-LDHs. Adsorption parameters of adsorption temperature, contact time, adsorbent dosage, and solution pH were investigated, the initial concentration of 2,4,6-TCP was 2.0 g/L. Response surface methodology (RSM) was employed to provide an investigative approach towards optimization of the adsorption process. The highest removal rate of 89.94% and the average removal rate of 88.74% were achieved under a temperature of 20.0 °C, a contact time of 2.5 h, an adsorbent dosage of 0.15 g, and a solution pH of 3. the capacity of the adsorbent is 599.6 mg/g. Meanwhile, the reusable properties of Zn2+-Al3+-C4H4O62−-LDHs were evaluated by the same adsorption system, and the removal rate of 2,4,6-TCP was 85.57% at the fifth regeneration. The obtained results confirmed that the Zn2+-Al3+-C4H4O62−-LDHs can be used as a potential introduction in practical applications for the removal of 2,4,6-TCP.

Pd-Nanoparticles@Layered Double Hydroxide/ Reduced Graphene Oxide (Pd NPs@LDH/rGO) Nanocomposite Catalyst for Highly Efficient Green Reduction of Aromatic Nitro Compounds

A facile chemical method is developed to fabricate well-dispersed and an approx. 5 nm sized Pd-nanoparticles (Pd-NPs) deposited ZnAl-LDH/rGO nanocomposite (Pd NPs@LDH/rGO) as a highly efficient and stable catalyst for...

Emerging 2D Nanomaterials for Biomedical Applications

Two-dimensional (2D) nanomaterials are an emerging class of biomaterials with remarkable potential for biomedical applications. The planar topography of these nanomaterials confers unique physical, chemical, electronic and optical properties, making them attractive candidates for therapeutic delivery, biosensing, bioimaging, regenerative medicine, and additive manufacturing strategies. The high surface-to-volume ratio of 2D nanomaterials promotes enhanced interactions with biomolecules and cells. A range of 2D nanomaterials, including transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), layered silicates (nanoclays), 2D metal carbides and nitrides (MXenes), metal-organic framework (MOFs), covalent organic frameworks (COFs) and polymer nanosheets have been investigated for their potential in biomedical applications. Here, we will critically evaluate recent advances of 2D nanomaterial strategies in biomedical engineering and discuss emerging approaches and current limitations associated with these nanomaterials. Due to their unique physical, chemical, and biological properties, this new class of nanomaterials has the potential to become a platform technology in regenerative medicine and other biomedical applications.

Two-dimensional biomaterials: material science, biological effect and biomedical engineering applications

To date, nanotechnology has increasingly been identified as a promising and efficient means to address a number of challenges associated with public health. In the past decade, two-dimensional (2D) biomaterials, as a unique nanoplatform with planar topology, have attracted explosive interest in various fields such as biomedicine due to their unique morphology, physicochemical properties and biological effect. Motivated by the progress of graphene in biomedicine, dozens of types of ultrathin 2D biomaterials have found versatile bio-applications, including biosensing, biomedical imaging, delivery of therapeutic agents, cancer theranostics, tissue engineering, as well as others. The effective utilization of 2D biomaterials stems from the in-depth knowledge of structure-property-bioactivity-biosafety-application-performance relationships. A comprehensive summary of 2D biomaterials for biomedicine is still lacking. In this comprehensive review, we aim to concentrate on the state-of-the-art 2D biomaterials with a particular focus on their versatile biomedical applications. In particular, we discuss the design, fabrication and functionalization of 2D biomaterials used for diverse biomedical applications based on the up-to-date progress. Furthermore, the interactions between 2D biomaterials and biological systems on the spatial-temporal scale are highlighted, which will deepen the understanding of the underlying action mechanism of 2D biomaterials aiding their design with improved functionalities. Finally, taking the bench-to-bedside as a focus, we conclude this review by proposing the current crucial issues/challenges and presenting the future development directions to advance the clinical translation of these emerging 2D biomaterials.

Super-stable mineralization effect of layered double hydroxides for heavy metals: Application in soil remediation and perspective

Agriculture soil plays a crucial role in sustainable development of human society. Unfortunately, soil quality is continuing degradation due to industrial and agricultural activities. Among them, agriculture soil contamination by heavy metals has become a serious threat to global food safety and human health. Because of low-cost, easy to implement, and fast effects, in situ chemical stabilization strategy has drawn great attention in soil remediation fields. However, since heavy metals are not removed from soil, it is still a great challenge to develop the cost-effective stabilizers with strong and long-term immobilization ability. Layered double hydroxides (LDHs) have been extensively applied in environmental fields owing to their unique structure. Very recently, LDHs have been used as amendment in in situ soil remediation for immobilization of heavy metals, exhibiting excellent long-term stability in practice application through trapping heavy metal ions into the lattice of LDHs layer. Given that the super-stable mineralization effect of LDHs for heavy metals, we summarize the structure of LDHs, key points of super-stable mineralization, practical challenges, and potential applications in other heavy metals pollution scenarios in this article, wishing that could provide new strategies and insights into rational designing of amendments for soil remediation.

Nitrogen removal from domestic wastewater using core-shell anthracite/Mg-layered double hydroxides (LDHs) in constructed wetlands

To investigate the mechanism of nitrogen removal by anthracites and enhance the nitrogen removal efficiency in constructed wetland, three kinds of layered double hydroxides (MgFe-LDHs, MgCo-LDHs, MgAl-LDHs) were prepared by co-precipitation under alkaline conditions and coated in situ on the surface of anthracites to synthesize core-shell anthracites/Mg-LDHs composites. Experiments with different treatments (columns loaded with original anthracites and anthracite/Mg-LDH composites) were conducted to study the nitrogen removal efficiency of domestic wastewater in constructed wetlands. The results of nitrogen removal experiments showed that the anthracite/MgAl-LDH composite had the best performance with average removal rates of 53.69%, 72.91%, and 47.43% for TN, NH₄⁺-N, and organic nitrogen, respectively. Modification changed the denitrification mode of the anthracites. The data of adsorption isothermal experiments were fitted better with the Freundlich model. The amount of ammonifier, nitrosobacteria, nitrobacter, and denitrifier on the surface of the Mg-LDH-modified anthracite was higher than that of the original anthracite. The performance of the anthracite in removing nitrogen was attributed to physical interception, chemical adsorption, and biological degradation. Moreover, the modified anthracites were superior to the original anthracite in the chemical adsorption and biodegradation, which indicated that coating the Mg-LDHs on the surface of common anthracite was a potential method to improve the nitrogen removal efficiency of domestic wastewater and to restore the eutrophic water body.

2D LDH-MoS2 clay nanosheets: synthesis, catalase-mimic capacity, and imaging-guided tumor photo-therapy

Owing to the hypoxia status of the tumor, the reactive oxygen species (ROS) production during photodynamic therapy (PDT) of the tumor is less efficient. Herein, a facile method which involves the synthesis of Mg-Mn-Al layered double hydroxides (LDH) clay with MoS2 doping in the surface and anionic layer space of LDH was presented, to integrate the photo-thermal effect of MoS2 and imaging and catalytic functions of Mg-Mn-Al LDH. The designed LDH-MoS2 (LMM) clay composite was further surface-coated with bovine serum albumin (BSA) to maintain the colloidal stability of LMM in physiological environment. A photosensitizer, chlorin e6 (Ce6), was absorbed at the surface and anionic layer space of LMM@BSA. In the LMM formulation, the magnetic resonance imaging of Mg-Mn-Al LDH was enhanced thanks to the reduced and acid microenvironment of the tumor. Notably, the ROS production and PDT efficiency of Ce6 were significantly improved, because LMM@BSA could catalyze the decomposing of the overexpressed H2O2 in tumors to produce oxygen. The biocompatible LMM@BSA that played the synergism with tumor microenvironment is a promising candidate for the effective treatment of cancer.

Layered double hydroxides as heterogeneous catalyst systems in the cross-coupling reactions: an overview

Layered double hydroxides (LDHs) are recognized as two-dimensional (2D) clay materials, which comprise the interlayer anions and host layers with a positive charge (brucite-like M(OH)₆ octahedral). They have been used as effective and eco-friendly heterogeneous catalytic systems in cross-coupling reactions. In this review, we try to underscore the applications of (LDHs) as an efficient and green catalyst in some important name reactions, namely Suzuki, Heck, Sonogashira, and Ullmann cross-coupling reactions leading to carbon-carbon bond formations.

Electronic modulation of oxygen evolution on metal doped NiFe layered double hydroxides

The bottleneck of electrochemical water splitting is the sluggish kinetics of oxygen evolution reaction (OER). Layered double hydroxides (LDHs) have been proposed as active and affordable electrocatalysts in OER. It has been reported that the activity of LDHs can be effectively tuned by doping of other metals. Despite previous experimental synthesis and improved catalytic performance, the in-depth OER mechanism on metal doped LDHs remains ambiguous. In the present work, transition metals (Cr, Mn and Co) doped NiFe LDHs were designed to investigate the doping effect in OER by both experimental analysis and density functional theory calculations. Based on experimental results, the intrinsic OER activity is Cr-NiFe LDHs > Co-NiFe LDHs > Mn-NiFe LDHs > NiFe LDHs, while the enhanced catalytic performance upon doping can be attributed to the interface effect, which results in the tuning of the binding energies of the intermediate states in OER.

In vitro and in vivo evaluation of poly-3-hydroxybutyric acid-sodium alginate as a core-shell nanofibrous matrix with arginine and bacitracin-nanoclay complex for dermal reconstruction of excision wound

The protective layer of the body, the skin is often prone to damage due to several factors like trauma, accidents, stress and hazardous exposure. This requires the skin to regenerate itself which is a finely regulated process. To hasten the process and prevent further damage, the dressing material is of prime importance. Herein, we fabricated poly-3-hydroxybutyric acid (P)-sodium alginate (S)-(core-shell) nanofibrous matrix as protective scaffold for the skin tissue regeneration in excision wound model. The arginine (A) and layered double hydroxides-bacitracin (LB) were incorporated into the core and shell of the nanofibrous matrix using co-axial electrospinning. The core-shell nanofibers assist in the synergistic, controlled delivery of L-arginine, and bacitracin with major role in the protein synthesis, cell signaling and infection control at wound site respectively. In vitro biocompatibility was confirmed by testing on dermal fibroblasts. Furthermore, in vivo studies revealed the synergistic effect of both the components in active healing of wounds. The biochemical, histochemical and immunohistochemical studies reveal that the arginine loaded scaffold aided cellular migration and proliferation. These results suggest that the simultaneous existence of the drug bacitracin-nano clay complex and L-arginine in the shell and core respectively has conferred interesting dynamic properties to the scaffold towards wound healing.

Surface-functionalized layered double hydroxide nanocontainers as bile acid sequestrants for lowering hyperlipidemia

The surface modification of two-dimensional (2D) nanocontainers with versatile chemical functionalities offers enormous advantages in medicine owing to their altered physicochemical properties. In this study, we demonstrate the fabrication of surface-functionalized layered double hydroxides (LDHs) towards their use as effective intestinal bile acid sequestrants. To demonstrate these aspects, the LDHs are initially modified with an amino silane, N¹-(3-trimethoxysilylpropyl) diethylenetriamine (LDHs-N3),which, on the one hand, subsequently used for the fabrication of the dendrimer by repetitive immobilization of ethylene diamine using methyl acrylate as a spacer. On the other hand, these surface-functionalized LDHs are wrapped with an anionic enteric co-polymer to not only prevent the degradation but also increase the stability of these 2D nanoplates in an acidic environment of the stomach to explore the in vivo efficacy. In vitro cholic acid adsorption results showed that these surface-functionalized LDHs displayed tremendous adsorption ability of bile salt. Consequently, the bile salt adsorption results in vivo in mice confirmed that the enteric polymer-coated diethylenetriamine silane-modified LDHs, resulting in the reduced cholesterol by 8.2% in the high fat diet-fed mice compared to that of the oil treatment group with augmented 28% of cholesterol, which gained weight by 6.7% in 4 weeks. Notably, the relative organ (liver and kidney) weight analysis and the tissue section of histology results indicated that the modified LDHs showed high biocompatibility in vivo. Together, our findings validate that these surface-functionalized 2D nanoplates have great potential as effective intestinal bile acid sequestrants.

Hydrotalcites in Construction Materials

Hydrotalcites are layered double hydroxides displaying a variety of stoichiometry caused by the different arrangement of the stacking of the layers, ordering of the metal cations, as well as the arrangement of anions and water molecules, in the interlayer galleries. The compounds of the hydrotalcite group show a wide range of the possible applications due to their specific properties, such as their large surface area, ion exchange ability, the insolubility in water and most of the organic sorbents, and others. Affordability, wide possibilities of manufacturing, and presence of sufficient natural deposits make hydrotalcites potentially very useful for the construction industry, as either a building material itself or an additive in mortars, concrete or in polymers composites used in constructions. Similar possible application of such material is in leakage control in a radioactive waste repository. The effect of use of these materials for ion exchange, anti-corrosion protection, radioactive ions containment, and similar purposes in building materials is examined in this review.

Layered Double Hydroxides Applications in the High-Performance Magnetic Nanomaterials

Layered double hydroxides (LDHs), which is related to magnetic nanomaterials’ have promising applications due to their unique structural and chemical properties. The easy tunability of cationic metals without changing the LDH structure as well as anion exchange features of LDH interlayer make them potential applications in supercapacitors, batteries, catalysis, water splitting, etc. Moreover, due to the high dispersion of active compounds in the matrix of LDH layers, LDHs have been used to construct various nanostructures such as nanoparticles, 2D monolayer nanosheets and 3D hierarchical’ which are valued in wide nanotechnological applications. Magnetic nanomaterials are an important research area because they have been applied to a wide range of disciplines such as biotechnology, data storage, magnetic fluids, magnetic resonance imaging, environmental remediation and catalysis. LDHs as starting materials including Ni, Fe or/and Co, can be used as magnetic nanomaterials. The combination between LDHs and magnetic nanostructures has improved the magnetic properties of those materials, hence can be used in more applications.

New nanocarried phenobarbital formulation: Maintains better control of pentylenetetrazole-Induced seizures

•

For the first time, phenobarbital was intercalated in the layered double hydroxide.

•

This study evaluated the slow release efficacy of intercalated phenobarbital.

•

The time of the anticonvulsant effect was verified by electroencephalographic records.

This study aims to evaluate the efficacy of slow release phenobarbital in the control of convulsions triggered by pentylenetetrazole (PTZ), verifying the time of permanence in the anticonvulsant effect through behavior and electroencephalographic records. A total of 162 male Wistar rats weighing between 100 and 120 g were divided into two groups, one for behavior analysis (n = 90) and biochemistry, and another for the acquisition of electrocorticographic record (n = 72). Hepatic enzymes were measured by obtaining a blood sample from the animals studied by means of a biochemical analysis. The procedures for electrode implant and electrocorticographic recordings were performed. The intercalation of phenobarbital in layered double hydroxide (LDH) nanocarrier allowed us to evaluate a new slow release pharmaceutical formulation based on methodologies that have proven longer residence time and lower side effects. This study demonstrates that phenobarbital can be a new perspective pharmaceutical formulation.

Recent innovations in functionalized layered double hydroxides: Fabrication, characterization, and industrial applications

Layered Double Hydroxides (LDHs) are a group of hydrotalcite-like nano-sized materials with cationic layers and exchangeable interlayer anions. The wide range of divalent and trivalent cationic metals and anionic compounds are employed in the synthesis of LDH materials, which have improved their importance among the researchers. Because of their high anion exchange property, memory effect, tunable behavior, bio-friendly, simple preparation, and their affordability, these nano-materials are essentially interested today. Modification of LDHs improves their behaviours to make them appropriate in industrial fields, including biological, adsorbent, mechanical, optical, thermal, electrical fields, etc. This review has critically discussed the structural features, main properties, and also clarified the most important methods of modification and intercalation of LDH nano-materials. Moreover, some novel reported researches related to the successful modification of LDH materials have been characterized and briefly the advantages, disadvantages, and applications are presented in the industrial fields.

Surface modification of aqueous miscible organic layered double hydroxides (AMO-LDHs)

Silane modification of layered double hydroxides (LDHs) plays an important role in controlling the surface hydrophobicity and improving the compatibility of LDHs dispersed in non-polar materials. However, the surface modification of conventional LDHs in hydrous conditions typically results in aggregated particle morphologies, low surface areas and accessible pore volumes. In this study, well dispersed and high surface area silane grafted AMO-Zn₂MgAl-CO₃ LDH were prepared using the silane coupling agents (triethoxyvinylsilane (TEVS), triethoxyoctylsilane (TEOS) and (3-glycidyloxypropyl)trimethoxysilane (TMGPS)) in anhydrous acetone. Solution ¹H NMR spectroscopy was initially used to study the rate and extent of silane reactivity with AMO-Zn₂MgAl-CO₃ LDH. Powder XRD, TEM, N₂ BET specific surface area and total pore volume measurements showed that the structure and morphology of silane-treated AMO-Zn₂MgAl-CO₃ LDHs remained largely unchanged. Solid state ¹³C CP-MAS, ²⁷Al DP-MAS and ²⁹Si CP-MAS NMR spectroscopy indicates that the silanes have been successfully grafted onto the surface of the LDH. In addition to maintaining their structure, morphology, high surface area and total pore volume, these surface-functionalised LDHs are now more hydrophobic, displaying a saturation water vapour uptake (<4 wt%) that is ca. 60% lower than the untreated AMO-LDH.

Layered double hydroxide/poly(vinylpyrrolidone) coated solid phase microextraction Arrow for the determination of volatile organic compounds in water

Today, wide variety of adsorbents have been developed for sample pretreatment to concentrate and separate harmful substances. However, only a few solid phase microextraction Arrow adsorbents are commercially available. In this study, we developed a new solid phase microextraction Arrow coating, in which nanosheets layered double hydroxides and poly(vinylpyrrolidone) were utilized as the extraction phase and poly(vinyl chloride) as the adhesive. This new coating entailed higher extraction capacity for several volatile organic compounds (allyl methyl sulfide, methyl propyl sulfide, 3-pentanone, 2-butanone, and methyl isobutyl ketone) compared to the commercial Carboxen 1000/polydimethylsiloxane coating. Fabrication parameters for the coating were optimized and extraction and desorption conditions were investigated. The validation of the new solid phase microextraction Arrow coating was accomplished using water sample spiked with volatile organic compounds. Under the optimal conditions, the limits of quantification for the five volatile organic compounds by the new solid phase microextraction Arrow coating and developed gas chromatography with mass spectrometry method were in the range of 0.2-4.6 ng/mL. The proposed method was briefly applied for enrichment of volatile organic compounds in sludge.

Multifunctional magnetic MgMn-oxide composite for efficient purification of Cd2+ and paracetamol pollution: Synergetic effect and stability

A multifunctional magnetic composite (0.3Ma-MgMnLDO-a) with the function of Cd²⁺ adsorption and paracetamol (PAM) degradation was successfully fabricated. Surface morphology showed that Fe₃O₄ agglomeration was overcome on composite. The composite had high specific surface area of 105.32 m² g^-1 and saturation magnetization of 40 emu∙g^-1. 0.3Ma-MgMnLDO-a could reach Cd²⁺ adsorption equilibrium within 5 min with 99 % removal rate. The maximum adsorption capacity was 3.76 mmol·g^-1 (422.62 mg g^-1), which apparently higher than that of Fe₃O₄-a and MgMnLDO-a, indicating that the Fe/Mn synergism results in excellent ability for Cd²⁺ adsorption. Moreover, the composite could efficiently activate peroxymonosulfate (PMS) to rapid degrade PAM with the highest first-order rate constants (k_obs = 0.116 min^-1) and total organic carbon (TOC) removal rate (67.7 %), which also due to the contribution of Fe/Mn synergism in PMS activation. The cycling of Mn^III/Mn^IV and Fe^II/Fe^III played an important role in activating PMS to generateO₂^-•, ¹O₂ and OH for degradation. The composite exhibited both stable adsorption and catalytic performance on wide pH (3-9) and five reuse cycles. Notably, there was mutual promotion between Cd²⁺ and PAM adsorption, while the coexistence of Cd²⁺ had slight inhibition on PAM degradation. Overall, the magnetic composite had promising application for purifying heavy metals and pharmaceuticals.