Heterometallic cluster complexes (RhMo, RhW) containing bridging 1,2-dicarba-closo-dodecaborane-1,2-dichalocogenolato ligands

Construction of trinuclear iridium clusters through ancillary ortho-carborane-1,2-diselenolato ligands, with simultaneous iridium-induced B–H activation

The reaction of the 16-electron "pseudo-aromatic" complex Cp*Ir[Se2C2(B10H10)] (1, Cp* = eta5-C5Me5) with [Ir(cod)(micro-OC2H5)]2 leads to the trinuclear iridium complexes {(cod)Ir[Se2C2(B10H8)(OC2H5)]}Ir{[Se2C2(B10H10)]IrCp*} (2), {(cod)Ir[Se2C2(B10H8)(OC2H5)]}Ir{[Se2C2(B10H9)]IrCp*} (3), {Cp*Ir[Se2C2(B10H9)]}{IrSe(2)[C2(B10H9)(OC2H5)]}{[Se2C2(B10H10)] IrCp*} (4) and one mononuclear complex Cp*Ir[Se2C2(B10H8)(OC2H5)(2)] (5). The reactivity of 2 was investigated and revealed that transformation from 2 to 3 occurred thermally in solution. The transoid complex 2 (with the carborane diselenolato units in trans position) can be converted in nearly 90% yield to the cisoid complex 3. In complexes 2, 3, two diselenolato carborane ligands bridge the Ir(3) core, which consists of Ir-Ir metal bonds. Compared with transoid 2, the cisoid 3 contains two iridium-boron bonds. Complex 4 consists of three different coordination environment carborane ligands (Ir-B(cluster): {Cp*Ir[Se2C2(B10H9)]}, O-B(cluster): {[Se2C2(B10H9)](OC2H5)}, and intact carborane: {Cp*Ir[Se2C2 (B10H10)]}) without the presence of a metal-metal bond. Analogous reaction of 1 with [Ir(cod)(micro-OCH(3))](2) results in formation of the trinuclear complex {Cp*Ir[Se2C2(B10H9)]}{IrSe(2)[C2(B10H9)(OCH3)]}{[Se2C2(B10H10)]IrCp*} (6) and mononuclear complex Cp*Ir[Se2C2(B10H8)(OCH3)(2)] (7). The structures of 2, 3, 4, 5, 6 and 7 have been determined by crystallographic studies.

Formation of direct metal–metal bonds from 16-electron “pseudo-aromatic” half-sandwich complexes Cp″M[E2C2(B10H10)]

Continuous study on preparation of multimetallic clusters is stimulated by their rich coordination chemistry and promising applications in a variety of interesting fields. Although numerous efforts have been devoted to this field, the rational design of homo- and hetero-multimetallic compounds with direct metal-metal bonding supported by 1,2-dicarba-closo-dodecarborane-1,2-dichalcogenolates will still be an important step forward. This tutorial review focuses on the synthetic approach via redox reactions between the pseudo-aromatic half-sandwich oraganometallic carborane precursors and low-valent transition metal reagents. The tailoring of reaction conditions and the structural information from the resulting products are discussed extensively.

A facile and general approach to the Rh–M (M = Co, Rh) single bond supported by ortho-carborane-1,2-dichalcogenolato ligands

A series of hetero- and homo-dinuclear complexes with direct metal-metal interaction are synthesized through reaction of Cp*Rh[E(2)C(2)(B(10)H(10))] (E = S (1a), Se (1b)) and CpRh[S(2)C(2)(B(10)H(10))] (2a) with low valent half-sandwich CpCo(CO)(2) or CpRh(C(2)H(4))(2) under moderate conditions. The resulting products, namely (Cp*Rh)(CpCo)[E(2)C(2)(B(10)H(10))] (E = S(3a); Se(3b)), (Cp*Rh)(CpRh)[E(2)C(2)(B(10)H(10))] (E = S(4a); Se(4b)) and (CpRh)(CpRh)[S(2)C(2)(B(10)H(10))] (5a), are fully characterized by IR and NMR spectroscopy and elemental analysis. The molecular structures of 3a, 3b, 4a, 4b and 5a are established by X-ray crystallography analyses, and the Rh-Co (2.4778(11) (3a) and 2.5092(16) (3b) A) and Rh-Rh bonds (2.5721(8) (4a), 2.6112(10) (4b), 2.5627(10) (5a) A) fall in the range of single bonds.

Binuclear half-sandwich cobalt(iii) and rhodium(iii) ortho-carboranedichalocogenolato complexes with ether chain-bridged bis(cyclopentadienyl) ligand

1, 1'-(3-Oxapentamethylene)dicyclopentadiene [O(CH(2)CH(2)C(5)H(5))(2)], containing a flexible chain-bridged group, was synthesized by the reaction of sodium cyclopentadienide with bis(2-chloroethyl) ether through a slightly modified literature procedure. Furthermore, the binuclear cobalt(III) complex O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(CO)I(2)](2) and insoluble polynuclear rhodium(III) complex {O[CH(2)CH(2)(eta(5)-C(5)H(4))RhI(2)](2)}(n) were obtained from reactions of with the corresponding metal fragments and they react easily with PPh(3) to give binuclear metal complexes, O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(PPh(3))I(2)](2) and O[CH(2)CH(2)(eta(5)-C(5)H(4))Rh(PPh(3))I(2)](2), respectively. Complexes react with bidentate dilithium dichalcogenolato ortho-carborane to give eight binuclear half-sandwich ortho-carboranedichalcogenolato cobalt(III) and rhodium(III) complexes O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(PPh(3))(E(2)C(2)B(10)H(10))](2) (E = S and Se), O[CH(2)CH(2)(eta(5)-C(5)H(4))](2)Co(2)(E(2)C(2)B(10)H(10)) (E = S and Se), O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(E(2)C(2)B(10)H(10))](2) (E = S and Se and O[CH(2)CH(2)(eta(5)-C(5)H(4))Rh(PPh(3))(E(2)C(2)B(10)H(10))](2) (E = S and Se). All complexes have been characterized by elemental analyses, NMR spectra ((1)H, (13)C, (31)P and (11)B NMR) and IR spectroscopy. The molecular structures were determined by X-ray diffractometry.

Synthesis and characterization of binuclear half-sandwich metal (Co, Ir and Ru) complexes containing ancillary ortho-carborane-1,2-dithiolato ligands

The assembly of soluble, air-stable, binuclear structures, namely {(p-cymene)Ru[S(2)C(2)(B(10)H(10))]}(2)(micro-pyz), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-pyz), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-bpy), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-bpe) and {Cp*Ir[E(2)C(2)(B(10)H(10))]}(2)(micro-bpo) (E = S (), Se), in which organometallic units are bridged by pyridyl-based organic linkers, are synthesized. The complexes have been fully characterized by IR and NMR spectroscopy, as well as elemental analysis. The molecular structures are established through X-ray crystallography.

Synthesis and structure of heterometallic complexes (RhFe, CoFe) containing bridging 1,2-dicarba-closo-dodecarborane-1,2-dichalcogenolato ligands

The prototype hetero-binuclear complexes containing metal-metal bonds, {CpRh[E2C2(B10H10)]}[Fe(CO)3] (Cp = Cp* = eta 5-Me5C5, E = S(5a), Se(5b); Cp = Cp = eta 5-1,3-tBu2C5H3, E = S(6a), Se(6b)) and {CpCo[E2C2(B10H10)]}[Fe(CO)3] (Cp = Cp* = eta 5-Me5C5, E = S(7a), Se(7b); Cp = Cp = eta 5-C5H5, E = S(8a), Se(8b)) were obtained from the reactions of 16-electron complexes CpRh[E2C2(B10H10)] (Cp = Cp*, E = S(1a), Se(1b); Cp = Cp, E = S(2a), Se(2b)), CpCo[E2C2(B10H10)] (Cp = Cp*, E = S(3a), Se(3b); Cp = Cp, E = S(4a), Se(4b)) with Fe(CO)5 in the presence of Me3NO. The molecular structures of {Cp*Rh[E2C2(B10H10)]}[Fe(CO)3] (E = S(5a), Se(5b)), {CpRh[S2C2(B10H10)]}[Fe(CO)3] (6a) {Cp*Co[S2C2(B10H10)]}[Fe(CO)3] (7a) and {CpCo[S2C2(B10H10)]}[Fe(CO)3] (8a) have been determined by X-ray crystallography. All these complexes were characterized by elemental analysis and IR and NMR spectra.