Manipulated photocurrent generation from pigment-exchanged photosynthetic proteins adsorbed to nanostructured WO3–TiO2 electrodes

On the Mechanism of Selective Chemical Exchange of Bacteriopheophytins in the Reaction Centers of Rhodobacter sphaeroides R-26

To elucidate the mechanism of site-selective chemical replacement of chromophores in the reaction centers (RCs) of photosynthetic bacteria by external pigments, we investigated how the efficiency of incorporation of plant pheophytin a (Pheo) into the binding sites for bacteriopheophytin a molecules (BPheo) in the isolated Rhodobacter sphaeroides R-26 RCs depended on the incubation medium temperature, Pheo aggregation state, and the presence of organic solvent (acetone). When Pheo was in a form of monomers in free detergent micelles in a water-detergent incubation medium, the degree of selective replacement of photochemically inactive BPheo H_B molecules upon incubation of the RC/Pheo mixture at 5°C was ~15%. The exchange efficiency increased to 40% upon incubation at 25°C and reached 100% at the same temperature when 10% acetone was added to the incubation medium. At both 5 and 25°C, the degree of pigment exchange increased approximately twice, when a mixture of Pheo monomers and dimers in the presence of 10% acetone was used as the incubation medium. The removal of acetone from this medium with the preservation of pigment forms led to a significant decrease in the efficiency of Pheo incorporation. The effect of acetone on the pigment exchange was also observed at an elevated incubation temperature (43.5°C), when functionally active BPheo H_A molecules were partially replaced. The results are discussed in terms of the mechanism according to which (i) the temperature-dependent internal movements of the RC protein facilitate the release of the BPheo molecule from the binding site with simultaneous insertion of the Pheo molecule into the same site in a coupled process, (ii) the role of temperature largely depends on the steric accessibility of binding pockets in the RC protein, (iii) the incorporation of Pheo occurs from a pool of monomeric molecules included in the RC-detergent micelles, and (iv) the presence of acetone in the incubation medium facilitates the exchange of Pheo monomers between micelles in the solution and the detergent belt of the RC complex.

In Situ, Protein-Mediated Generation of a Photochemically Active Chlorophyll Analogue in a Mutant Bacterial Photosynthetic Reaction Center

All possible natural amino acids have been substituted for the native LeuL185 positioned near the B-side bacteriopheophytin (H_B) in the bacterial reaction center (RC) from Rhodobacter sphaeroides. Additional mutations that enhance electron transfer to the normally inactive B-side cofactors are present. Approximately half of the isolated RCs with Glu at L185 contain a magnesium chlorin (C_B) in place of H_B. The chlorin is not the common BChl a oxidation product 3-desvinyl-3-acetyl chlorophyll a with a C-C bond in ring D and a C═C bond in ring B but has properties consistent with reversal of these bond orders, giving 17,18-didehydro BChl a. In such RCs, charge-separated state P⁺C_B^- forms in ∼5% yield. The other half of the GluL185-containing RCs have a bacteriochlorophyll a (BChl a) denoted β_B in place of H_B. Residues His, Asp, Asn, and Gln at L185 yield RCs with ≥85% β_B in the H_B site, while most other amino acids result in RCs that retain H_B (≥95%). To the best of our knowledge, neither bacterial RCs that harbor five BChl a molecules and one chlorophyll analogue nor those with six BChl a molecules have been reported previously. The finding that altering the local environment within a cofactor binding site of a transmembrane complex leads to in situ generation of a photoactive chlorin with an unusual ring oxidation pattern suggests new strategies for amino acid control over pigment type at specific sites in photosynthetic proteins.

Ease synthesis of mesoporous WO3-TiO2 nanocomposites with enhanced photocatalytic performance for photodegradation of herbicide imazapyr under visible light and UV illumination

Herein, we report the ease synthesis of mesoporous WO3-TiO2 nanocomposites at different WO3 contents (0-5wt%) together with their photocatalytic performance for the degradation of the imazapyr herbicide under visible light and UV illumination. XRD and Raman spectra indicated that the highly crystalline anatase TiO2 phase and monoclinic and triclinic of WO3 were formed. The mesoporous TiO2 exhibits large pore volumes of 0.267cm(3)g-1 and high surface areas of 180m(2)g(-1) but they become reduced to 0.221cm(3)g(-1) and 113m(2)g(-1), respectively upon WO3 incorporation, with tunable mesopore diameter in the range of 5-6.5nm. TEM images show WO3-TiO2 nanocomposites are quite uniform with 10-15nm of TiO2 and 5-10nm of WO3 sizes. Under UV illumination, the overall photocatalytic efficiency of the 3% WO3-TiO2 nanocomposite is 3.5 and 6.6 times higher than that of mesoporous TiO2 and commercial UV-100 photocatalyst, respectively. The 3% WO3-TiO2 nanocomposite is considered to be the optimum photocatalyst which is able to degrade completely (100% conversion) of imazapyr herbicide along 120min with high photonic efficiency ∼8%. While under visible light illumination, the 0.5% WO3-TiO2 nanocomposite is the optimum photocatalyst which achieves 46% photocatalytic efficiency.

Hybrid system of semiconductor and photosynthetic protein

Photosynthetic protein has the potential to be a new attractive material for solar energy absorption and conversion. The development of semiconductor/photosynthetic protein hybrids is an example of recent progress toward efficient, clean and nanostructured photoelectric systems. In the review, two biohybrid systems interacting through different communicating methods are addressed: (1) a photosynthetic protein immobilized semiconductor electrode operating via electron transfer and (2) a hybrid of semiconductor quantum dots and photosynthetic protein operating via energy transfer. The proper selection of materials and functional and structural modification of the components and optimal conjugation between them are the main issues discussed in the review. In conclusion, we propose the direction of future biohybrid systems for solar energy conversion systems, optical biosensors and photoelectric devices.

Advances in biomimetic and nanostructured biohybrid materials

The rapid increase of interest in the field of biohybrid and biomimetic materials that exhibit improved structural and functional properties is attracting more and more researchers from life science, materials science, and nanoscience. Concomitant results offer valuable opportunities for applications that involve disciplines dealing with engineering, biotechnology, medicine and pharmacy, agriculture, nanotechnology, and others. In the current contribution we collect recent illustrative examples of assemblies between materials of biological origin and inorganic solids of different characteristics (texture, structure, and particle size). We introduce here a general overview on strategies for the preparation and conformation of biohybrids, the synergistic effects that determine the final properties of these materials, and their diverse applications, which cover areas as different as tissue engineering, drug delivery systems, biosensing devices, biocatalysis, green nanocomposites, etc.

Photoelectrochemical properties of alternating multilayer films composed of titania nanosheets and Zn porphyrin

Alternating multilayer films composed of titania nanosheets and Zn porphyrins were prepared by use of a previously reported Langmuir-Blodgett film-transfer method in order to fabricate photoelectrochemical devices. Closely packed titania nanosheet monolayers on indium tin oxide (ITO), mica, and quartz surfaces strongly adsorbed cationic [5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrinatozinc]4+ (ZnTMPyP4+) by electrostatic interactions. The alternating deposition process afforded nanometer-scale multilayer films with the following structure: solid surface/(titania nanosheet/ZnTMPyP4+)n (n is the number of layers). The multilayer films were characterized by various physical measurements, including AFM, XRD, and UV-visible spectra. The visible-light irradiation of this multilayer film on an ITO electrode in the presence of triethanolamine as an electron donor yielded an anodic photocurrent. The action spectrum was consistent with the absorption spectrum of ZnTMPyP4+, which indicates that the photoexcitation of ZnTMPyP4+ is responsible for the photocurrent generation. However, the photocurrent density decreased with an increasing number of layers, which indicates that the harvesting of photoexcited electrons vertically through the titania nanosheets in the ITO/(titania nanosheet/ZnTMPyP4+)n structure was not efficient. To overcome this problem, the use of a lateral interlayer connection to all of the titania nanosheets with Ag paste was examined. As a result, a dramatic improvement in the photocurrent density was obtained. Thus, for efficient photocurrent generation with the titania nanosheet-ZnTMPyP4+ composite material, the lateral connection to all of the titania nanosheet layers is effective.

Photosynthetic reaction center functionalized nano-composite films: effective strategies for probing and exploiting the photo-induced electron transfer of photosensitive membrane protein

Photosynthetic reaction center (RC), a robust transmembrane pigment-protein complex, works as the crucial component participating the primary event of the photo-electrochemical conversion in bacteria. Sparked by the high photo-induced charge separation yield (ca. 100%) of RC, great interests have been aroused to fabricate versatile RC-functionalized nano-composite films for exploring the initial photosynthetic electron transfer (ET) of RC, and thus exploiting well-designed bio-photoelectric converters. In this review, we classify and summarize the current status about the concepts and methods of constructing RC-immobilized nano-composite films or devices for probing the photo-induced ET, and applying to novel bioelectronics if it is possible.