Aqueous suspension of amphiphilic diblock copolymer nanoparticles prepared in situ from a water-soluble poly(sodium acrylate) alkoxyamine macroinitiator

Modern Trends in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.

A novel anti-washout curing solution of calcium phosphate cement prepared via irradiation polymerization

The anti-washout ability of calcium phosphate cement (CPC) determines its effectiveness in clinical application. In the current research, the common method for improving the anti-washout ability of CPC is to add anti-washout polymer agents. Sodium polyacrylate powder is an excellent anti-washout agent but when bonded with CPC it basically degrades the anti-washout performance of CPC after γ-ray irradiation, and is widely used in the sterilization process of CPC products. Therefore, we propose a method for the preparation of a sodium polyacrylate solution through irradiation polymerization as curing solution for CPC. This method first uses γ-ray irradiation sterilization to improve the anti-washout ability of CPC directly. It not only avoids the adverse effects of γ-rays on anti-washout agents, but also the CPC blended using this sodium polyacrylate solution had good biological properties and injectability. It provides a new method for promoting the anti-washout properties of calcium phosphate cement, which is of great significance for expanding the clinical application of CPC.

Prevention of marine biofouling in the aquaculture industry by a coating based on polydimethylsiloxane-chitosan and sodium polyacrylate

In this study, a series of novel hydrophobic/hydrophilic hybrid (HHH) coatings with the feature of preventing the fouling phenomenon was fabricated based on polydimethylsiloxane (PDMS), as matrix and two hydrophilic polymers: chitosan and sodium polyacrylate, as dispersed phases. Antibacterial activity, pseudo-barnacle adhesion strength, surface free energy, water contact angle, and water absorption were performed for all samples. Evaluating field immersion of the samples was performed in the natural seawater. The results showed that the dispersed phase containing PDMS coatings showed simultaneously both of antibacterial activity and foul release behavior. Among the samples, the PCs4 coating containing 4 wt% Cs indicated the lowest pseudo barnacle adhesion strength (0.04 MPa), the lowest surface free energy (18.94 mN/m), the highest water contact angle (116.05°), and the percentage of fouling organisms 9.8 % after 30 days immersion. The HHH coatings can be considered as novel eco-friendly antifouling/foul release coatings for aquaculture applications.

RAFT Copolymerization of Vinyl Acetate and Acrylic Acid in the Selective Solvent

Reversible addition-fragmentation chain transfer polymerization was successfully applied to the synthesis of the gradient copolymer of acrylic acid and vinyl acetate in the selective solvent. The gradient degree of the copolymer was varied by the monomer feed. The monomer conversion was found to affect the ability of the copolymer to self-assemble in aqueous solutions in narrowly dispersed micelles with an average hydrodynamic radius of about 250 nm. Furthermore, the synthesized copolymers also tended to self-assemble throughout copolymerization in the selective solvent.

Dispersion Polymerization versus Emulsifier-Free Emulsion Polymerization for Nano-Object Fabrication: A Comprehensive Comparison

Although the preparation of nano-objects by emulsifier-free controlled/living radical emulsion polymerization has drawn much attention, the morphologies of these formed objects are difficult to predict and to reproduce because of the much more complex nucleation mechanisms of emulsion polymerization compared to only one self-assembling nucleation mechanism of controlled radical dispersion polymerization. The present study compares dispersion polymerization with emulsifier-free emulsion polymerization in terms of nucleation mechanism, polymerization kinetics, and disappearance behavior of the macrochain transfer agent, gel permeation chromatograms curves of the obtained block copolymer as well as the structural and morphological differences between the produced nano-objects on the basis of published data. Moreover, the effects of the inherently heterogeneous nature of emulsion polymerization on the mechanism of reversible addition-fragmentation transfer polymerization and the nano-object morphology are examined, and efficient agitation and adequate solubility of the core-forming monomer in water are identified as the most crucial factors for the fabrication of nonspherical nano-objects.

Creation of polymeric nanostructures by living coordination block copolymerization of allene derivatives with fluoroalkyl substituents under polymerization-induced self-assembly conditions and their application to superhydrophobic surfaces

Block copolymer micelles with a fluorous corona were synthesized via living allene polymerization in fluorous media and a polymerization-induced self-assembly (PISA) process, resulting in excellent superhydrophobic optically transparent coatings.

Photoactive rose bengal-based latex via RAFT emulsion polymerization-induced self-assembly

Rose bengal shell- or core-functionalized acrylic latex synthesized by RAFT emulsion PISA: interfacial photosensitized ¹O₂ production under visible light.

Functionalization-induced self-assembly under ambient conditions via thiol-epoxide “click” chemistry

Polymer micelles were formed using thiol-epoxide “click” chemistry to trigger functionalization-induced self-assembly (FISA) of block copolymers by modifying a reactive glycidyl methacrylate block with solvophobes.

Polymerization techniques in polymerization-induced self-assembly (PISA)

The development of controlled/“living” polymerization greatly stimulated the prosperity of the fabrication and application of block copolymer nano-objects.

Polymerization-induced self-assembly for the fabrication of polymeric nano-objects with enhanced structural stability by cross-linking

This review discusses the strategies of core-cross-linking in most of the PISA literatures (including post-polymerization cross-linking, photo-cross-linking and in situ cross-linking) and the applications of the cross-linked nano-objects.

Characterization of hydrosoluble fraction and oligomers in poly(vinylidene chloride) latexes by capillary electrophoresis using electrophoretic mobility modeling

The characterization of hydrosoluble oligomers in latexes is an important topic in emulsion polymerization since oligomers are suspected to be responsible for latex destabilization. In this work, the hydrosoluble fraction of poly(vinylidene chloride) latexes synthesized by emulsion polymerization of three monomers (acrylic acid, methyl acrylate, vinylidene chloride) was characterized by capillary electrophoresis (CE). CE using direct UV detection permitted to estimate residual monomers and surfactants concentrations contained in the latexes serums. Water soluble oligomers, polymerization initiator (persulfate) and other inorganic anions were detected by indirect UV detection. The oligomers content in the dry extract of serum was estimated to be about 6% (% m/m) represented mainly by 9 different compounds belonging to 3 different families. Using a semi-empirical electrophoretic mobility modeling, the charge number of these oligomers was estimated to be -2 and the molar masses were estimated in the range of ∼300-550 g.mol^-1. Oligomer samples obtained by surfactant-free polymerization, with different initial monomers proportions, provided qualitatively 14 different oligomers, including the 9 oligomers previously detected in the serums. Finally, the latex was characterized (electrophoretic mobility and zeta potential) using its serum as a background electrolyte. This approach could be very useful to study the behavior of the latexes, and possibly destabilization effect, in analytical conditions very close to its real environment / applications.

Functionalization-Induced Self-Assembly of Block Copolymers for Nanoparticle Synthesis

Nanoparticle synthesis was demonstrated via functionalization-induced self-assembly (FISA) of block copolymers using Suzuki-Miyaura cross-coupling. In situ self-assembly was triggered in organic media by the progressive installation of solvophobic pendant groups onto an initially soluble diblock copolymer, rendering the reactive block insoluble and causing the formation of spherical polymeric micelles. Self-assembly was found to depend on the percent functionalization (f_%), where after a critical threshold micelles were accessible that increased in size with increasing f_% values. We found the chemical nature of the installed functional group to be crucial for conducting FISA and for controlling the solution morphology, with relatively solvophilic adducts remaining as unimers and increasingly solvophobic adducts trending toward larger micelles, from ca. 40 to 100 nm in diameter. The core and corona of the anticipated micellar structure were visualized using fluorine mapping through electron energy loss spectroscopy, in conjunction with FISA achieved through pendent trifluorophenyl functionality. This work establishes FISA as a new, versatile synthetic strategy to create nanoparticles having tunable morphologies with potential application as molecular payload delivery vehicles.

Polymerization-Induced Nanostructural Transitions Driven by In Situ Polymer Grafting

Polymerization-induced structural transitions have gained attention recently due to the ease of creating and modifying nanostructured materials with controlled morphologies and length scales. Here, we show that order-order and disorder-order nanostructural transitions are possible using in situ polymer grafting from the diblock polymer, poly(styrene)-block-poly(butadiene). In our approach, we are able to control the resulting nanostructure (lamellar, hexagonally packed cylinders, and disordered spheres) by changing the initial block polymer/monomer ratio. The nanostructural transition occurs by a grafting from mechanism in which poly(styrene) chains are initiated from the poly(butadiene) block via the creation of an allylic radical, which increases the overall molecular weight and the poly(styrene) volume fraction. The work presented here highlights how the chemical process of converting standard linear diblock copolymers to grafted block polymers drives interesting and controllable polymerization-induced morphology transitions.

Living Ab Initio Emulsion Polymerization of Methyl Methacrylate in Water Using a Water-Soluble Organotellurium Chain Transfer Agent under Thermal and Photochemical Conditions

Ab initio emulsion polymerization of methyl methacrylate (MMA) using a water-soluble organotellurium chain transfer agent in the presence of the surfactant Brij 98 in water is reported. Polymerization proceeded under both thermal and visible light-irradiation conditions, giving poly(methyl methacrylate) (PMMA) with controlled molecular weight and low dispersity (Đ<1.5). Despite the formation of an opaque latex, the photoactivation of the organotellurium dormant species took place efficiently, as demonstrated by the quantitative monomer conversion and temporal control. Control of polymer particle size (PDI<0.030) was also achieved using a semi-batch monomer addition process. The PMMA polymer in the particles retained high end-group fidelity and was successfully used for the synthesis of block copolymers.

RAFT/MADIX emulsion copolymerization of vinyl acetate and N-vinylcaprolactam: towards waterborne physically crosslinked thermoresponsive particles

Controlled radical emulsion polymerization as a tool to synthesize thermoresponsive PVCL-based amphiphilic copolymer particles crosslinked by supramolecular hydrophobic interactions.

An insight into polymerization-induced self-assembly by dissipative particle dynamics simulation

Polymerization-induced self-assembly is a one-pot route to produce concentrated dispersions of block copolymer nano-objects. Herein, dissipative particle dynamics simulations with a reaction model were employed to investigate the behaviors of polymerization-induced self-assembly. The polymerization kinetics in the polymerization-induced self-assembly were analyzed by comparing with solution polymerization. It was found that the polymerization rate enhances in the initial stage and decreases in the later stage. In addition, the effects of polymerization rate, length of macromolecular initiators, and concentration on the aggregate morphologies and formation pathway were studied. The polymerization rate and the length of the macromolecular initiators are found to have a marked influence on the pathway of the aggregate formations and the final structures. Morphology diagrams were mapped correspondingly. A comparison between simulation results and experimental findings is also made and an agreement is shown. This work can enrich our knowledge about polymerization-induced self-assembly.

Drug-Initiated Synthesis of Polymer Prodrugs: Combining Simplicity and Efficacy in Drug Delivery

In the field of nanomedicine, the global trend over the past few years has been toward the design of highly sophisticated drug delivery systems with active targeting and/or imaging capabilities, as well as responsiveness to various stimuli to increase their therapeutic efficacy. However, providing sophistication generally increases complexity that could be detrimental in regards to potential pharmaceutical development. An emerging concept to design efficient yet simple drug delivery systems, termed the "drug-initiated" method, consists of growing short polymer chains from drugs in a controlled fashion to yield well-defined drug-polymer prodrugs. These materials are obtained in a reduced amount of synthetic steps and can be self-assembled into polymer prodrug nanoparticles, be incorporated into lipid nanocarriers or be used as water-soluble polymer prodrugs. This Perspective article will capture the recent achievements from the "drug-initiated" method and highlight the great biomedical potential of these materials.

Addition of water to an alcoholic RAFT PISA formulation leads to faster kinetics but limits the evolution of copolymer morphology

Addition of water leads to a much faster rate for the RAFT dispersion polymerization of benzyl methacrylate in ethanol, enabling degrees of polymerization of up to 1500 to be achieved.

Porous membranes from acid decorated block copolymer nano-objects via RAFT alcoholic dispersion polymerization

Acid decorated diblock copolymer nano-objects were prepared by polymerization-induced self-assembly via RAFT dispersion polymerization of methyl methacrylate. Spheres were used to prepare thin film membranes.

Block copolymer synthesis by controlled/living radical polymerisation in heterogeneous systems

We review the range of CLRP-controlled syntheses of block copolymer particles in dispersed systems, which are being exploited to create new opportunities for the design of nanostructured soft materials.