A facile synthesis of linear benzene-fused bis(tetrathiafulvalene) compounds and their application for organic field-effect transistors

Molecular Orientation Control of Liquid Crystal Organic Semiconductor for High-Performance Organic Field-Effect Transistors

The control of molecular orientation and ordering of liquid crystal (LC) organic semiconductor (OSC) for high-performance and thermally stable organic thin-film transistors is investigated. A liquid crystalline molecule, 2-(4-dodecyl thiophenyl)[1]dibenzothiopheno[6,5-b:6',5'-f]-thieno[3,2-b]thiophene (C12-Th-DBTTT) is synthesized, showing the highly ordered smectic X (SmX) phase, demonstrating molecular reorganization via thermal annealing. The resulting thermally evaporated polycrystalline film and solution-sheared thin film show high charge carrier mobilities of 9.08 and 27.34 cm² V^-1 s^-1, respectively. Atomic force microscopy and grazing-incidence X-ray diffraction analyses prove that the random SmA₁-like structure (smectic monolayer) is reorganized to the highly ordered SmA₂-like structure (smectic bilayer) of C12-Ph-DBTTT at the crystal-SmX transition temperature region. Because of the strong intermolecular interactions between rigid DBTTT cores, the thin film devices of C12-Th-DBTTT show excellent thermal stability up to 300 °C, indicating that LC characterization of conventional OSC materials can obtain high electrical performance as well as superior thermal durability.

A tetrathiafulvalene–l-glutamine conjugated derivative as a supramolecular gelator for embedded C60 and absorbed rhodamine B

An l-glutamine-containing tetrathiafulvalene gelator could form charge-transfer complex gels in the presence of C₆₀, and also the native gel exhibited excellent absorption properties for the removal of rhodamine B from aqueous solution.

T-shaped monopyridazinotetrathiafulvalene-amino acid diad based chiral organogels with aggregation-induced fluorescence emission

A series of pyridazine coupled tetrathiafulvalene T-shaped derivatives with varying amino acid moieties have been synthesized and their gelation properties were studied in various organic solvents. Among these derivatives, two gelators bearing glycine or phenylalanine units display efficient gelation in aromatic and polar solvents. Interestingly, these gelators, except for the gelator containing two tryptophan units, are able to gel DMF via a solution-to-gel transformation when triggered with sonication for less than 20 s or cooled below zero. A number of experiments revealed that these gelator molecules self-assembled into elastically interpenetrating three-dimensional chiral fibrillar aggregates. Importantly, all of the resulting gels result in a dramatic enhancement of the fluorescence intensity compared with their hot solution in spite of the absence of a conventional fluorophore unit and the fluorescence was effectively quenched by the introduction of C60. Moreover, the gelators can be utilized for the removal of different types of toxic molecules, such as aromatic solvents and cationic dyes, from wastewater.

Cycloaddition reactions of 2H-1-benzothietes and 1,3,5,7-tetrathio-s-indacene-2,6-dithiones

2H-1-benzothiete (1) and 2H,5H-benzo[1,2-b:4,5-b′]bisthiete (3) react in form of their open valence isomers with the trithiocarbonic acid esters 2a–c. The one- or twofold cycloaddition reactions yield 1,3-dithiin rings, in which C-2 is a spiro-C atom, that bears four sulfur groups. The bifunctional reactant 3 gives additionally band-shaped, hardly soluble oligomers.

Single-Crystal X-ray Structures of conductive π-Stacking Dimers of Tetrakis(alkylthio)benzene Radical Cations

Salts containing radical cations of 1,2,4,5-tetrakis(isopropylthio)benzene (TPB) and 1,2,4,5-tetrakis(ethylthio) benzene (TEB) have been successfully synthesized with . These newly synthesized salts have been characterized by UV-Vis absorption, EPR spectroscopy, conductivity measurement, single crystal X-ray diffraction analysis as well as DFT calculation. This study raises the first crystal structure of conductive π-stacking radical cation with single phenyl ring and reveals their conductivity has relationship with the stack structure which affected by the substituent.

Gel properties of T-shaped tetrathiafulvalene–pyridazine conjugates and F4TCNQ-induced morphological transformation

T-shaped organic π-conjugates and their F₄TCNQ charge-transfer (CT) complexes are developed as LMOGs. The morphological changes of the organogels occur obviously due to the CT interaction.

Bis(vinylenedithio)tetrathiafulvalene analogues of BEDT-TTF

This review aims to give an overview of the current status of our research on the synthesis of π-electron donor bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF, ET) analogues prepared from 1,8-diketones via a ring forming reaction. The new synthesized π-electron donors have vinyl moieties producing extended π-electron delocalization over the substituent phenyl rings at the peripheries.

A family of unsymmetrical hydroxyl-substituted BEDT-TTF donors: syntheses, structures and preliminary thin film studies

Synthetic routes to three novel OH-functionalized BEDT-TTF donorsH1–H3are presented. Charge transfer salts ofH1and2and polystyrene blend thin films ofH3have been studied after doping with iodine.

HOMO stabilisation in π-extended dibenzotetrathiafulvalene derivatives for their application in organic field-effect transistors

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB-TTF) central core and a 2,1,3-chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB-TTF, have been synthesised as active materials for organic field-effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron-withdrawing 2,1,3-chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution-processed single-crystal transistors exhibit high performance with a hole mobility up to 0.04 cm(2)  V(-1)  s(-1) as well as good ambient stability.

New unsymmetrically benzene-fused bis (tetrathiafulvalene): synthesis, characterization, electrochemical properties and electrical conductivity of their materials

The synthesis of new unsymmetrically benzene-fused bis (tetrathiafulvalene) has been carried out by a cross-coupling reaction of the respective 4,5-dialkyl-1,3-dithiole-2-selenone 6-9 with 2-(4-(p-nitrophenyl)-1,3-dithiole-2-ylidene)-1,3,5,7-tetrathia-s-indacene-6-one 5 prepared by olefination of 4-(p-nitrophenyl)-1,3-dithiole-2-selenone 3 and 1,3,5,7-tetrathia-s-indacene-2,6-dione 4. The conversion of the nitro moiety 10a-d to amino 11a-d then dibenzylamine 12a-d groups respectively used reduction and alkylation methods. The electron donor ability of these new compounds has been measured by cyclic voltammetry (CV) technique. Charge transfer complexes with tetracyanoquino-dimethane (TCNQ) were prepared by chemical redox reactions. The complexes have been proven to give conducting materials.

Using the nitro group to induce π-stacking in terthiophenes

A new synthetic route to mononitrated oligothiophenes is described, as well as the preparation of halogenated derivatives (Br, I) thereof. An unusual deep red colour is observed and explained, with the aid of DFT calculations, as arising from a significant quinoidal contribution to the molecular structure. The crystal structures of two compounds, H(C4H2S)3NO2 and Br(C4H2S)3NO2, are presented. Both compounds have planar sheets held together by intermolecular short contacts (hydrogen bonds and, for the latter, NO2···Br interactions); the sheets do not directly superimpose, so the effect of the π-stacking is not maximized. Solid-state fluorescence and extended-Hückel band-structure calculations are also presented for these materials.

Sub-50 nm positioning of organic compounds onto silicon oxide patterns fabricated by local oxidation nanolithography

We present a process to fabricate molecule-based nanostructures by merging a bottom-up interaction and a top-down nanolithography. Direct nanoscale positioning arises from the attractive electrostatic interactions between the molecules and silicon dioxide nanopatterns. Local oxidation nanolithography is used to fabricate silicon oxide domains with variable gap separations ranging from 40 nm to several microns in length. We demonstrate that an ionic tetrathiafulvalene (TTF) semiconductor can be directed from a macroscopic liquid solution (1 µM) and selectively deposited onto predefined nanoscale regions of a 1 cm(2) silicon chip with an accuracy of 40 nm.

Chemical and Constitutional Influences in the Self-Assembly of Functional Supramolecular Hydrogen-Bonded Nanoscopic Fibres

A new series of secondary amides bearing long alkyl chains with pi-electron-donor cores has been synthesized and characterised, and their self-assembly upon casting at surfaces has been studied. The different supramolecular assemblies of the materials have been visualized by using atomic force microscopy (AFM) and transmission electron microscopy (TEM). It is possible to obtain well-defined fibres of these aromatic core molecules as a result of the hydrogen bonds between the amide groups. Indeed, by altering the alkyl-chain lengths, constitutions, concentrations and solvent, it is possible to form different rodlike aggregates on graphite. Aggregate sizes with a lower limit of 6-8 nm width have been reached for different amide derivatives, while others show larger aggregates with rodlike morphologies which are several micrometers in length. For one compound that forms nanofibres, doping was performed by using a chemical oxidant, and the resulting layer on graphite was shown to exhibit metallic-like spectroscopy curves when probed with current-sensing AFM. This technique also revealed current maps of the surface of the molecular material. Fibre formation not only takes place on the graphite surface: nanometre scale rods have been imaged by using TEM on a grid after evaporation of solutions of the compounds in chloroform. Molecular modelling proves the importance of the hydrogen bonds in the generation of the fibres, and indicates that the constitution of the molecules is vital for the formation of the desired columnar stacks, results that are consistent with the images obtained by microscopic techniques. The results show the power of noncovalent bonds in self-assembly processes that can lead to electrically conducting nanoscale supramolecular wires.