Molecular oxygen activation by a molybdenum(iv) monooxo bis(β-ketiminato) complex

Dioxygen Activation by a Bioinspired Tungsten(IV) Complex

An increasing number of discovered tungstoenzymes raises interest in the biomimetic chemistry of tungsten complexes in oxidation states +IV, +V, and +VI. Bioinspired (sulfur-rich) tungsten(VI) dioxido complexes are relatively prevalent in literature. Still, their energetically demanding reduction directly correlates with a small number of known tungsten(IV) oxido complexes, whose chemistry is not well explored. In this paper, a reduction of the [WO₂(6-MePyS)₂] (6-MePyS = 6-methylpyridine-2-thiolate) complex with PMe₃ to a phosphine-stabilized tungsten(IV) oxido complex [WO(6-MePyS)₂(PMe₃)₂] is described. This tungsten(IV) complex partially releases one PMe₃ ligand in solution, creating a vacant coordination site capable of activating dioxygen to form [WO₂(6-MePyS)₂] and OPMe₃. Therefore, [WO₂(6-MePyS)₂] can be used as a catalyst for the aerobic oxidation of PMe₃, rendering this complex a rare example of a tungsten system utilizing dioxygen in homogeneous catalysis. Additionally, the investigation of the reactivity of the tungsten(IV) oxido complex with acetylene, substrate of a tungstoenzyme acetylene hydratase (AH), revealed the formation of the tungsten(IV) acetylene adduct. Although this adduct was previously reported as an oxidation product of the tungsten(II) acetylene carbonyl complex, here it is obtained via substitution at the sulfur-rich tungsten(IV) center, mimicking the initial step of the first shell mechanism for AH as suggested by computational studies.

Oxygen Atom Transfer Reactivity of Molybdenum(VI) Complexes Employing Pyrimidine- and Pyridine-2-thiolate Ligands

Four dioxidomolybdenum(VI) complexes of the general structure [MoO₂L₂] employing the S,N-bidentate ligands pyrimidine-2-thiolate (PymS, 1), pyridine-2-thiolate (PyS, 2), 4-methylpyridine-2-thiolate (4-MePyS, 3) and 6-methylpyridine-2-thiolate (6-MePyS, 4) were synthesized and characterized by spectroscopic means and single-crystal X-ray diffraction analysis (2-4). Complexes 1-4 were reacted with PPh₃ and PMe₃, respectively, to investigate their oxygen atom transfer (OAT) reactivity and catalytic applicability. Reduction with PPh₃ leads to symmetric molybdenum(V) dimers of the general structure [Mo₂O₃L₄] (6-9). Kinetic studies showed that the OAT from [MoO₂L₂] to PPh₃ is 5 times faster for the PymS system than for the PyS and 4-MePyS systems. The reaction of complexes 1-3 with PMe₃ gives stable molybdenum(IV) complexes of the structure [MoOL₂(PMe₃)₂] (10-12), while reduction of [MoO₂(6-MePyS)₂] (4) yields [MoO(6-MePyS)₂(PMe₃)] (13) with only one PMe₃ coordinated to the metal center. The activity of complexes 1-4 in catalytic OAT reactions involving Me₂SO and Ph₂SO as oxygen donors and PPh₃ as an oxygen acceptor has been investigated to assess the influence of the varied ligand frameworks on the OAT reaction rates. It was found that [MoO₂(PymS)₂] (1) and [MoO₂(6-MePyS)₂] (4) are similarly efficient catalysts, while complexes 2 and 3 are only moderately active. In the catalytic oxidation of PMe₃ with Me₂SO, complex 4 is the only efficient catalyst. Complexes 1-4 were also found to catalytically reduce NO₃^- with PPh₃, although their reactivity is inhibited by further reduced species such as NO, as exemplified by the formation of the nitrosyl complex [Mo(NO)(PymS)₃] (14), which was identified by single-crystal X-ray diffraction analysis. Computed ΔG^⧧ values for the very first step of the OAT were found to be lower for complexes 1 and 4 than for 2 and 3, explaining the difference in catalytic reactivity between the two pairs and revealing the requirement for an electron-deficient ligand system.

Backbone Reactivity of Lithium β-Diketiminate (NacNac) Complexes with CO2 , tBuNCO and iPrNCO

Though alkali metal NacNac (β-diketiminate) complexes have been utilised in synthesis as NacNac-transfer agents, studies of them in their own right with small molecules are exceptionally rare. Here, the lithium compound of the common 2,6-diisopropylphenyl-β-methyldiketiminate [NacNac(Dipp, Me)] ligand is investigated with carbon dioxide and isocyanates. In all four cases reaction occurs at the backbone γ-C atom of the NacNac ligand, which redistributes electronically into a diimine. Insertion of CO₂ gives an eight-atom carboxylate (Li₂ O₄ C₂ ) ring at the γ-C site in a dimer. Insertion of tBuNCO gives a secondary amide at the γ-C site in a monomer with TMEDA chelating lithium. Double insertion of tBuNCO and (adventitious) oxygen gives a dimer with a (LiO)₂ central core involving the latter source. Insertion of less bulky (iPrNCO) gives a dimer with dimerisation through the C=O bonds of the emergent secondary amide function.

Dioxygen Activation with Molybdenum Complexes Bearing Amide-Functionalized Iminophenolate Ligands

Two novel iminophenolate ligands with amidopropyl side chains (HL2 and HL3) on the imine functionality have been synthesized in order to prepare dioxidomolybdenum(VI) complexes of the general structure [MoO₂L₂] featuring pendant internal hydrogen bond donors. For reasons of comparison, a previously published complex featuring n-butyl side chains (L1) was included in the investigation. Three complexes (1–3) obtained using these ligands (HL1–HL3) were able to activate dioxygen in an in situ approach: The intermediate molybdenum(IV) species [MoO(PMe₃)L₂] is first generated by treatment with an excess of PMe₃. Subsequent reaction with dioxygen leads to oxido peroxido complexes of the structure [MoO(O₂)L₂]. For the complex employing the ligand with the n-butyl side chain, the isolation of the oxidomolybdenum(IV) phosphino complex [MoO(PMe₃)(L1)₂] (4) was successful, whereas the respective Mo(IV) species employing the ligands with the amidopropyl side chains were found to be not stable enough to be isolated. The three oxido peroxido complexes of the structure [MoO(O₂)L₂] (9–11) were systematically compared to assess the influence of internal hydrogen bonds on the geometry as well as the catalytic activity in aerobic oxidation. All complexes were characterized by spectroscopic means. Furthermore, molecular structures were determined by single-crystal X-ray diffraction analyses of HL3, 1–3, 9–11 together with three polynuclear products {[MoO(L2)₂]₂(µ-O)} (7), {[MoO(L2)]₄(µ-O)₆} (8) and [C₉H₁₃N₂O]₄[Mo₈O₂₆]·6OPMe₃ (12) which were obtained during the synthesis of reduced complexes of the type [MoO(PMe₃)L₂] (4–6).

Interaction of Metal Oxido Compounds with B(C6 F5 )3

Lewis acid-base pair chemistry has been placed on a new level with the discovery that adduct formation between an electron donor (Lewis base) and acceptor (Lewis acid) can be inhibited by the introduction of steric demand, thus preserving the reactivity of both Lewis centers, resulting in highly unusual chemistry. Some of these highly versatile frustrated Lewis pairs (FLP) are capable of splitting a variety of small molecules, such as dihydrogen, in a heterolytic and even catalytic manner. This is in sharp contrast to classical reactions where the inert substrate must be activated by a metal-based catalyst. Very recently, research has emerged combining the two concepts, namely the formation of FLPs in which a metal compound represents the Lewis base, allowing for novel chemistry by using the heterolytic splitting power of both together with the redox reactivity of the metal. Such reactivity is not restricted to the metal center itself being a Lewis acid or base, also ancillary ligands can be used as part of the Lewis pair, still with the benefit of the redox-active metal center nearby. This Minireview is designed to highlight the novel reactions arising from the combination of metal oxido transition-metal or rare-earth-metal compounds with the Lewis acid B(C₆ F₅ )₃ . It covers a wide area of chemistry including small molecule activation, hydrogenation and hydrosilylation catalysis, and olefin metathesis, substantiating the broad influence of the novel concept. Future goals of this young and exciting area are briefly discussed.

Heterolytic Si-H Bond Cleavage at a Molybdenum-Oxido-Based Lewis Pair

The reaction of a molybdenum(VI) oxido imido complex with the strong Lewis acid B(C6 F5 )3 gave access to the Lewis adduct [Mo{OB(C6 F5 )3 }(NtBu)L2 ] featuring reversible B-O bonding in solution. The resulting frustrated Lewis pair (FLP)-like reactivity is reflected by the compound's ability to heterolytically cleave Si-H bonds, leading to a clean formation of the novel cationic MoVI species 3 a (R=Et) and 3 b (R=Ph) of the general formula [Mo(OSiR3 )(NtBu)L2 ][HB(C6 F5 )3 ]. These compounds possess properties highly unusual for molybdenum d0 species such as an intensive, charge-transfer-based color as well as a reversible redox couple at very low potentials, both dependent on the silane used. Single-crystal X-ray diffraction analyses of 2 and 4 b, a derivative of 3 b featuring the [FB(C6 F5 )3 ]- anion, picture the stepwise elongation of the Mo=O bond, leading to a large increase in the electrophilicity of the metal center. The reaction of 3 a and 3 b with benzaldehyde allowed for the regeneration of compound 2 by hydrosilylation of the benzaldehyde. NMR spectroscopy suggested an unusual mechanism for the transformation, involving a substrate insertion in the B-H bond of the borohydride anion.

Formation of Mono Oxo Molybdenum(IV) PNP Pincer Complexes: Interplay between Water and Molecular Oxygen

The synthesis of cationic mono oxo MoIV PNP pincer complexes of the type [Mo(PNPMe-iPr)(O)X]+ (X = I, Br) from [Mo(PNPMe-iPr)(CO)X2] is described. These compounds are coordinatively unsaturated and feature a strong Mo≡O triple bond. The formation of these complexes proceeds via cationic 14e intermediates [Mo(PNPMe-iPr)(CO)X]+ and requires both molecular oxygen and water. ESI MS measurements with 18O labeled water (H2 18O) and molecular oxygen (18O2) indicates that water plays a crucial role in the formation of the Mo≡O bond. A plausible mechanism based on DFT calculations is provided. The X-ray structure of [Mo(PNPMe-iPr)(O)I]SbF6 is presented.

Activation of Molecular Oxygen by a Molybdenum(IV) Imido Compound

Activation of molecular dioxygen at a molybdenum(IV) imido compound led to the isolation and full characterization of a remarkably stable transition-metal imidoperoxido complex.

Synthesis, characterization and oxygen atom transfer reactivity of a pair of Mo(iv)O- and Mo(vi)O2-enedithiolate complexes – a look at both ends of the catalytic transformation

A novel pair of mono-oxo and di-oxo bis-dithiolene molybdenum complexes were synthesized, characterized and catalytically investigated as models for a molybdenum dependent oxidoreductase.

Oxygen activation and catalytic aerobic oxidation by Mo(iv)/(vi) complexes with functionalized iminophenolate ligands

Synthesis of molybdenum(vi) dioxido complexes 1-3, coordinated by one or two functionalized iminophenolate ligands HL1 or HL2, bearing a donor atom side chain or a phenyl substituent, respectively, allowed for systematic investigation of the oxygen atom transfer (OAT) reactivity of such complexes towards phosphanes. Depending on stoichiometry and employed phosphane (PMe3 or PPh3), different molybdenum(iv) and molybdenum(v) complexes 4-7 were obtained. Whereas molybdenum(iv) complexes 4 and 5, bearing a terminal PMe3 ligand, readily reacted with molecular O2 to form oxido peroxido complexes 8 and 9, phosphane free μ-oxido bridged dinuclear molybdenum(v) complexes 6 and 7 proved to be stable towards oxidation with molecular O2 under ambient conditions. Single-crystal X-ray diffraction analyses revealed different isomeric structures in the solid state for dioxido complexes 1 and 2 in comparison with oxido phosphane complex 5, dinuclear oxido μ-oxido complex 6 and oxido peroxido complexes 8 and 9, pointing towards an isomeric rearrangement during OAT. Compounds 1 and 2 were furthermore tested for their ability to catalyze the aerobic oxidation of PMe3 and PPh3. A significant difference in catalytic activity has been observed in the oxidation of PMe3, where complex 1 bearing donor atom functionalized ligands led to higher conversion and selectivity than complex 2 coordinated by phenyl iminophenolate ligands. In the oxidation of PPh3, complex 2 leads to higher conversion compared to 1. In a control experiment, phenyl-based dinuclear μ-oxido complex 7, derived from complex 2, was found to be catalytically active, which suggests a lower energy barrier for disproportionation into [MoO(L)2] and [MoO2(L)2] in comparison with methoxypropylene based compound 6, a prerequisite for subsequent reactivity toward molecular O2.

A novel porphyrinic photosensitizer based on the molecular complex of meso-tetraphenylporphyrin with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone: higher photocatalytic activity, photooxidative stability and solubility in non-chlorinated solvents

The 1 : 2 molecular complex ofmeso-tetraphenylporphyrin with 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) has been used as a promising photosensitizer for the aerobic oxidation of olefins in different chlorinated and non-chlorinated solvents.

Activation of molecular oxygen by a molybdenum complex for catalytic oxidation

A sterically demanding molybdenum(VI) dioxo complex was found to catalytically activate molecular oxygen and to transfer its oxygen atoms to phosphines. Intermediate peroxo as well as reduced mono-oxo complexes were isolated and fully characterized. Monomeric Mo(IV) monooxo species proved to be of an unusual nature with the coordinated phosphine trans to the oxo group. The reduced molybdenum centers can activate O2 to form a stable Mo(VI) oxo-peroxo complex unambiguously characterized by single crystal X-ray diffraction analysis. NMR experiments demonstrate that both oxygen atoms of the peroxo unit are transferred to an accepting substrate, generating the Mo(IV) intermediate and restarting the catalytic cycle.

Influence of the oxygen atom acceptor on the reaction coordinate and mechanism of oxygen atom transfer from the dioxo-Mo(VI) complex, Tp(iPr)MoO(2)(OPh), to tertiary phosphines

The oxygen atom transfer reactivity of the dioxo-Mo(VI) complex, Tp(iPr)MoO(2)(OPh) (Tp(iPr) = hydrotris(3-isopropylpyrazol-1-yl)borate), with a range of tertiary phosphines (PMe(3), PMe(2)Ph, PEt(3), PBu(n)(3), PEt(2)Ph, PEtPh(2), and PMePh(2)) has been investigated. The first step in all the reactions follows a second-order rate law indicative of an associative transition state, consistent with nucleophilic attack by the phosphine on an oxo ligand, namely, Tp(iPr)MoO(2)(OPh) + PR(3) --> Tp(iPr)MoO(OPh)(OPR(3)). The calculated free energy of activation for the formation of the OPMe(3) intermediate (Chem. Eur. J. 2006, 12, 7501) is in excellent agreement with the experimental DeltaG() value reported here. The second step of the reaction, that is, the exchange of the coordinated phosphine oxide by acetonitrile, Tp(iPr)MoO(OPh)(OPR(3)) + MeCN --> Tp(iPr)MoO(OPh)(MeCN) + OPR(3), is first-order in starting complex in acetonitrile. The reaction occurs via a dissociative interchange (I(d)) or associative interchange (I(a)) mechanism, depending on the nature of the phosphine oxide. The activation parameters for the solvolysis of Tp(iPr)MoO(OPh)(OPMe(3)) (DeltaH(++) = 56.3 kJ mol(-1); DeltaS(++) = -125.9 J mol(-1) K(-1); DeltaG(++) = 93.8 kJ mol(-1)) and Tp(iPr)MoO(OPh)(OPEtPh(2)) (DeltaH(++) = 66.5 kJ mol(-1); DeltaS(++) = -67.6 J mol(-1) K(-1); DeltaG(++) = 86.7 kJ mol(-1)) by acetonitrile are indicative of I(a) mechanisms. In contrast, the corresponding parameters for the solvolysis reaction of Tp(iPr)MoO(OPh)(OPEt(3)) (DeltaH(++) = 95.8 kJ mol(-1); DeltaS(++) = 26.0 J mol(-1) K(-1); DeltaG(++) = 88.1 kJ mol(-1)) and the remaining complexes by the same solvent are indicative of an I(d) mechanism. The equilibrium constant for the solvolysis of the oxo-Mo(V) phosphoryl complex, [Tp(iPr)MoO(OPh)(OPMe(3))](+), by acetonitrile was calculated to be 1.9 x 10(-6). The oxo-Mo(V) phosphoryl complex is more stable than the acetonitrile analogue, whereas the oxo-Mo(IV) acetonitrile complex is more stable than the phosphoryl analogue. The higher stability of the Mo(V) phosphoryl complex may explain the phosphate inhibition of sulfite oxidase.