Engineering an Oxygen-Binding Protein for Photocatalytic CO2 Reductions in Water

While native CO2 -reducing enzymes display remarkable catalytic efficiency and product selectivity, few artificial biocatalysts have been engineered to allow understanding how the native enzymes work. To address this issue, we report cobalt porphyrin substituted myoglobin (CoMb) as a homogeneous catalyst for photo-driven CO2 to CO conversion in water. The activity and product selectivity were optimized by varying pH and concentrations of the enzyme and the photosensitizer. Up to 2000 TON(CO) was attained at low enzyme concentrations with low product selectivity (15 %), while a product selectivity of 74 % was reached by increasing the enzyme loading but with a compromised TON(CO). The efficiency of CO generation and overall TON(CO) were further improved by introducing positively charged residues (Lys or Arg) near the active stie of CoMb, which demonstrates the value of tuning the enzyme secondary coordination sphere to enhance the CO2 -reducing performance of a protein-based photocatalytic system.

Density functional theory and CCSD(T) evaluation of ionization potentials, redox potentials, and bond energies related to zirconocene polymerization catalysts

Quantum-mechanical-based computational design of molecular catalysts requires accurate and fast electronic structure calculations to determine and predict properties of transition-metal complexes. For Zr-based molecular complexes related to polyethylene catalysis, previous evaluation of density functional theory (DFT) and wavefunction methods only examined oxides and halides or select reaction barrier heights. In this work, we evaluate the performance of DFT against experimental redox potentials and bond dissociation enthalpies (BDEs) for zirconocene complexes directly relevant to ethylene polymerization catalysis. We also examined the ability of DFT to compute the fourth atomic ionization potential of zirconium and the effect the basis set selection has on the ionization potential computed with CCSD(T). Generally, the atomic ionization potential and redox potentials are very well reproduced by DFT, but we discovered relatively large deviations of DFT-calculated BDEs compared to experiment. However, evaluation of BDEs with CCSD(T) suggests that experimental values should be revisited, and our CCSD(T) values should be taken as most accurate.

Mechanism and Selectivity of Electrochemical Reduction of CO2 on Metalloporphyrin Catalysts from DFT Studies

Electrochemical reduction of CO₂ to value-added chemicals has been hindered by poor product selectivity and competition from hydrogen evolution reactions. This study aims to unravel the origin of the product selectivity and competitive hydrogen evolution reaction on [MP]⁰ catalysts (M = Fe, Co, Rh and Ir; P is porphyrin ligand) by analyzing the mechanism of CO₂ reduction and H₂ formation based on the results of density functional theory calculations. Reduction of CO₂ to CO and HCOO^- proceeds via the formation of carboxylate adduct ([MP-COOH]⁰ and ([MP-COOH]^-) and metal-hydride [MP-H]^-, respectively. Competing proton reduction to gaseous hydrogen shares the [MP-H]^- intermediate. Our results show that the pK_a of [MP-H]⁰ can be used as an indicator of the CO or HCOO^-/H₂ preference. Furthermore, an ergoneutral pH has been determined and used to determine the minimum pH at which selective CO₂ reduction to HCOO^- becomes favorable over the H₂ production. These analyses allow us to understand the product selectivity of CO₂ reduction on [FeP]⁰, [CoP]⁰, [RhP]⁰ and [IrP]⁰; [FeP]⁰ and [CoP]⁰ are selective for CO whereas [RhP]⁰ and [IrP]⁰ are selective for HCOO^- while suppressing H₂ formation. These descriptors should be applicable to other catalysts in an aqueous medium.

Interfacing single-atom catalysis with continuous-flow organic electrosynthesis

The global warming crisis has sparked a series of environmentally cautious trends in chemistry, allowing us to rethink the way we conduct our synthesis, and to incorporate more earth-abundant materials in our catalyst design. "Single-atom catalysis" has recently appeared on the catalytic spectrum, and has truly merged the benefits that homogeneous and heterogeneous analogues have to offer. Further still, the possibility to activate these catalysts by means of a suitable electric potential could pave the way for a true integration of diverse synthetic methodologies and renewable electricity. Despite their esteemed benefits, single-atom electrocatalysts are still limited to the energy sector (hydrogen evolution reaction, oxygen reduction, etc.) and numerous examples in the literature still invoke the use of precious metals (Pd, Pt, Ir, etc.). Additionally, batch electroreactors are employed, which limit the intensification of such processes. It is of paramount importance that the field continues to grow in a more sustainable direction, seeking new ventures into the space of organic electrosynthesis and flow electroreactor technologies. In this piece, we discuss some of the progress being made with earth abundant homogeneous and heterogeneous electrocatalysts and flow electrochemistry, within the context of organic electrosynthesis, and highlight the prospects of alternatively utilizing single-atom catalysts for such applications.

Study of geometric, electronic structures and vibrations of 4, 4′, 4′′, 4′′′-(porphine-5,10,15,20 tetrayl) tetrakis (benzene sulfonic acid) compound by computational and experimental techniques

The optimized geometry and vibrational frequencies of a substituted compound of tetraphenylporphine namely 4, 4[Formula: see text], 4[Formula: see text], 4[Formula: see text]-(porphine-5,10,15,20 tetrayl) tetrakis (benzene sulfonic acid) have been investigated using density functional theory. The vibrational spectra of tetraphenylporphine and its substituted complex were simulated to study the substitution effects of sulfonic acid group at the peripheral sites of tetraphenylporphine. Experimentally, vibrational properties of these molecules have been studied using infrared absorption spectroscopic technique. The vibrational frequencies obtained from the theoretical studies generally agree with the experimental values. For substituted molecules, due to a change in charge distribution, ring vibrations accompanied by the S–O motions also appear at the higher wavenumbers. In the lower region, C–H bending vibrations diminish and SO3 group vibrations arise. The electronic absorption spectra of the substituted tetraphenylporphine in different solvents have been studied using UV-vis spectroscopy. In addition to dipole-dipole and electrostatic interactions, hydrogen bonding plays a key role in molecular-solvent interactions. The energy gap between the highest occupied and lowest unoccupied molecular orbitals and natural bonding orbital analysis show the intermolecular charge transfer interactions. The molecular electrostatic potential and solvent accessible surface area analysis were made in order to study the interaction sites of the molecules. The current-voltage characteristics for the substituted molecule were also plotted. It was found that substituted tetraphenylporphine show good photoconductivity.

Active Role of the Buffer in the Proton-Coupled Electron Transfer of Immobilized Iron Porphyrins

Evaluation of the proton-coupled electron transfer thermodynamics of immobilized hemin is challenging due to the disparity of its electrochemical titration curves reported in the literature. Deviations from the one-electron, one-proton transfer at circumneutral pHs have been commonly ascribed to either the formation of dimeric species or the ionization of a second iron-bound water molecule. Herein, however, we report on non-idealities in the more acidic region, whose onset and extent vary with the nature and concentration of the commonly used phosphate and acetate buffers. It is shown that these deviations originate in the ligand-exchange binding between the oxidized aquo-hemin complex and the anionic components of the buffer, so that they are restricted to the pH interval where these forms coexist. A stepwise approach was developed to quantify unambiguously the apparent and intrinsic binding equilibrium constants. The apparent binding equilibrium constant exhibits a peak-shaped pH dependence, whose maximum is located at approximately the midpoint between the pK_a of the iron-bound water and the first pK_a of the buffer, and its magnitude is greater for the phosphate than for the acetate buffer. But strikingly, the opposite trend was found for the magnitude of the intrinsic binding equilibrium constants determined from the apparent ones, due to the different relative locations of the phosphoric and acetic pK_a values with respect to that of the oxidized aquo-hemin. To probe the role of the heme propionic residues, a similar study was carried out with a propionic-free iron porphyrin containing eight ethyl residues. These substituents decrease the acidity of the iron-bound water, strengthen the iron(III)-acetate binding, weaken the iron(III)-dihydrogen phosphate binding, and enable the binding between iron(III) and monohydrogen phosphate, which was hampered in hemin by the presence of the negatively charged propionate residues. Overall, this work provides a more complete speciation of immobilized iron porphyrins under acidic conditions than previously considered, showing the substitutional lability of the aqua ligand in the oxidized state of the iron center and the reluctance of its hydroxyl counterpart to anion exchange. Knowledge of these redox- and pH-dependent bindings with the buffer components is crucial for a rigorous quantification of the proton-coupled electron transfer and the electrocatalytic activity of iron porphyrins.

DFT and Empirical Considerations on Electrocatalytic Water/Carbon Dioxide Reduction by CoTMPyP in Neutral Aqueous Solutions*

A combined experimental and density functional theory (DFT) investigation was employed in order to examine the mechanism of electrochemical CO₂ reduction and H₂ formation from water reduction in neutral aqueous solutions. A water soluble cobalt porphyrin, cobalt [5,10,15,20-(tetra-N-methyl-4-pyridyl)porphyrin], (CoTMPyP), was used as catalyst. The possible attachment of different axial ligands as well as their effect on the electrocatalytic cycles were examined. A cobalt porphyrin hydride is a key intermediate which is generated after the initial reduction of the catalyst. The hydride is involved in the formation of H₂ and formate and acts as an indirect proton source for the formation of CO in these H⁺ -starving conditions. The experimental results are in agreement with the computations and give new insights into electrocatalytic mechanisms involving water soluble metalloporphyrins. We conclude that in addition to the porphyrin's structure and metal ion center, the electrolyte surroundings play a key role in dictating the products of CO₂ /H₂ O reduction.

Can one use the electronic absorption spectra of metalloporphyrins to benchmark electronic structure methods? A case study on the cobalt porphyrin

In this article, we describe calculations on the absorption spectrum of cobalt(ii) porphyrin, using density functional (DFT) and multireference n-electron valence perturbation (NEVPT) theories. With these calculations, we describe the lowest-energy states of doublet and quartet spin multiplicities, the excited states that originate the Q and B bands of porphyrins, some higher-energy π-π* excitations and charge-transfer states, HOMO-LUMO gaps, and ionisation potentials. Results undoubtedly show that the position of B band is essentially independent on the DFT functional, while the Q band is better described by pure functionals, and these bands do not depend on the initial state of the transition (whether doublet or quartet) as well. However, other excitation energies, orbital energies, and ionisation potentials strongly depend on the functional, in some cases varying more than 2 eV. Based on these results we conclude that one should not use the UV-Vis spectrum of metalloporphyrins to benchmark density functionals, mainly those properties related to coordination with the metallic ion. Furthermore, the results show that functionals that yield correct spectra may be based on an incorrect ground state description. Moreover, we reinforce that one must be skeptical about the reference chosen to benchmark electronic structure calculations, such as DFT functionals and active spaces for multireference calculations.

Computational screening of transition metal-doped phthalocyanine monolayers for oxygen evolution and reduction

Rationally designing efficient, low-cost and stable catalysts toward the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR) is of significant importance to the development of renewable energy technologies. In this work, we have systematically investigated a series of potentially efficient and stable single late transition metal atom doped phthalocyanines (TM@Pcs, TM = Mn, Fe, Co, Ni, Cu, Ru, Rh, Pd, Ir and Pt) as single-atom catalysts (SACs) for applications toward the OER and ORR through a computational screening approach. Our calculations indicate that TM atoms can tightly bind with Pc monolayers with high diffusion energy barriers to prevent the isolated atoms from clustering. The interaction strength between intermediates and TM@Pc governs the catalytic activities for the OER and ORR. Among all the considered TM@Pc catalysts, Ir@Pc and Rh@Pc were found to be efficient OER electrocatalysts with overpotentials η OER of 0.41 and 0.44 V, respectively, and for the ORR, Rh@Pc exhibits the lowest overpotential η ORR of 0.44 V followed by Ir@Pc (0.55 V), suggesting that Rh@Pc is an efficient bifunctional catalyst for both the OER and ORR. Moreover, it is worth noting that the Rh@Pc catalyst can remain stable against dissolution under the pH = 0 condition. Ab initio molecular dynamic calculations suggest that Rh@Pc could remain stable at 300 K. Our findings highlight a novel family of two-dimensional (2D) materials as efficient and stable SACs and offer a new strategy for catalyst design.

Cooperative Stabilization of the [Pyridinium-CO2-Co] Adduct on a Metal-Organic Layer Enhances Electrocatalytic CO2 Reduction

Pyridinium has been shown to be a cocatalyst for the electrochemical reduction of CO₂ on metal and semiconductor electrodes, but its exact role has been difficult to elucidate. In this work, we create cooperative cobalt-protoporphyrin (CoPP) and pyridine/pyridinium (py/pyH⁺) catalytic sites on metal-organic layers (MOLs) for an electrocatalytic CO₂ reduction reaction (CO₂RR). Constructed from [Hf₆(μ₃-O)₄(μ₃-OH)₄(HCO₂)₆] secondary building units (SBUs) and terpyridine-based tricarboxylate ligands, the MOL was postsynthetically functionalized with CoPP via carboxylate exchange with formate capping groups. The CoPP group and the pyridinium (pyH⁺) moiety on the MOL coactivate CO₂ by forming the [pyH⁺-^-O₂C-CoPP] adduct, which enhances the CO₂RR and suppresses hydrogen evolution to afford a high CO/H₂ selectivity of 11.8. Cooperative stabilization of the [pyH⁺-^-O₂C-CoPP] intermediate led to a catalytic current density of 1314 mA/mgCo for CO production at -0.86 V_RHE, which corresponds to a turnover frequency of 0.4 s^-1.

Linkage Effect in the Heterogenization of Cobalt Complexes by Doped Graphene for Electrocatalytic CO2 Reduction

Immobilization of planar Co^II -2,3-naphthalocyanine (NapCo) complexes onto doped graphene resulted in a heterogeneous molecular Co electrocatalyst that was active and selective to reduce CO₂ into CO in aqueous solution. A systematic study revealed that graphitic sulfoxide and carboxyl dopants of graphene were the efficient binding sites for the immobilization of NapCo through axial coordination and resulted in active Co sites for CO₂ reduction. Compared to carboxyl dopants, the sulfoxide dopants further improved the electron communication between NapCo and graphene, which led to the increase of turnover frequency of the Co sites by about 3 times for CO production with a Faradic efficiency up to 97 %. Pristine NapCo in the absence of a graphene support did not display efficient electron communication with the electrode and thus failed to serve as the electrochemical active site for CO₂ reduction under the identical conditions.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Tris(2-benzimidazolylmethyl)amine-Directed Synthesis of Single-Atom Nickel Catalysts for Electrochemical CO Production from CO2

The electrochemical reduction of carbon dioxide (CO₂ ) to value-added products is a promising approach to reducing excess CO₂ in the atmosphere. However, the development of electrocatalysts for highly selective and efficient electrochemical CO₂ reduction has been challenging because protons are usually easier to reduce than CO₂ in an aqueous electrolyte. Recently, single-atom catalysts (SACs) have been suggested as candidate CO₂ reduction catalysts due to their unique catalytic properties. To prepare single-atom metal active sites, the stabilization of metal atoms over conductive supports such as graphene sheets to prevent metal aggregation is crucial. To address this issue, a facile method was developed to prepare single-atom nickel active sites on reduced graphene oxide (RGO) sheets for the selective production of carbon monoxide (CO) from CO₂ . The tris(2-benzimidazolylmethyl)amine (NTB) ligand was introduced as a linker that can homogeneously disperse nickel atoms on the graphene oxide (GO) sheets. Because the NTB ligands form strong interactions with the GO sheets by π-π interactions and with nickel ions by ligation, they can effectively stabilize nickel ions on GO sheets by forming Ni(NTB)-GO complexes. High-temperature annealing of Ni(NTB)-GO under inert atmosphere produces nickel- and nitrogen-doped reduced graphene oxide sheets (Ni-N-RGO) with single-atom Ni-N₄ active sites. Ni-N-RGO shows high CO₂ reduction selectivity in the reduction of CO₂ to CO with 97 % faradaic efficiency at -0.8 V vs. RHE (reversible hydrogen electrode).

Synthesis of Large Mesoporous-Macroporous and High Pore Volume, Mixed Crystallographic Phase Manganese Oxide, Mn2O3/Mn3O4 Sponge

The controlled synthesis of mixed crystallographic phase Mn₂O₃/Mn₃O₄ sponge material by varying heating rates and isothermal segments provides valuable information about the morphological and physical properties of the obtained sample. The well-characterized Mn₂O₃/Mn₃O₄ sponge and applicability of difference in reactivity of H₂ and CO₂ desorbed during the synthesis provide new developments in the synthesis of metal oxide materials with unique morphological and surface properties. We report the preparation of a Mn₂O₃/Mn₃O₄ sponge using a metal nitrate salt, water, and Dextran, a biopolymer consisting of glucose monomers. The Mn₂O₃/Mn₃O₄ sponge prepared at 1 °C·min^-1 heating rate to 500 °C and held isothermally for 1 h consisted of large mesopores-macropores (25.5 nm, pore diameter) and a pore volume of 0.413 mL/g. Furthermore, the prepared Mn₂O₃/Mn₃O₄ and 5 mol %-Fe-Mn₂O₃/Mn₃O₄ sponges provide potential avenues in the development of solid-state catalyst materials for alcohol and amine oxidation reactions.

Effects of Substrate and Polymer Encapsulation on CO2 Electroreduction by Immobilized Indium(III) Protoporphyrin

Heterogenization of molecular catalysts for CO₂ electroreduction has attracted significant research activity, due to the combined advantages of homogeneous and heterogeneous catalysts. In this work, we demonstrate the strong influence of the nature of the substrate on the selectivity and reactivity of electrocatalytic CO₂ reduction, as well as on the stability of the studied immobilized indium(III) protoporphyrin IX, for electrosynthesis of formic acid. Additionally, we investigate strategies to improve the CO₂ reduction by tuning the chemical functionality of the substrate surface by means of electrochemical and plasma treatment and by catalyst encapsulation in polymer membranes. We point out several underlying factors that affect the performance of electrocatalytic CO₂ reduction. The insights gained here allow one to optimize heterogenized molecular systems for enhanced CO₂ electroreduction without modification of the catalyst itself.

Using porphyrin–amino acid pairs to model the electrochemistry of heme proteins: experimental and theoretical investigations

Deconstructing the complex electrochemistry of heme proteins into simpler heme–amino acid interactions.

Electrocatalytic reduction of carbon dioxide to carbon monoxide and methane at an immobilized cobalt protoporphyrin

The electrochemical conversion of carbon dioxide and water into useful products is a major challenge in facilitating a closed carbon cycle. Here we report a cobalt protoporphyrin immobilized on a pyrolytic graphite electrode that reduces carbon dioxide in an aqueous acidic solution at relatively low overpotential (0.5 V), with an efficiency and selectivity comparable to the best porphyrin-based electrocatalyst in the literature. While carbon monoxide is the main reduction product, we also observe methane as by-product. The results of our detailed pH-dependent studies are explained consistently by a mechanism in which carbon dioxide is activated by the cobalt protoporphyrin through the stabilization of a radical intermediate, which acts as Brønsted base. The basic character of this intermediate explains how the carbon dioxide reduction circumvents a concerted proton–electron transfer mechanism, in contrast to hydrogen evolution. Our results and their mechanistic interpretations suggest strategies for designing improved catalysts.

The conversion of carbon dioxide to useful products is a major challenge in energy research. Here, the authors report a cobalt protoporphyrin immobilized on graphite that is capable of the selective and efficient electrochemical reduction of carbon dioxide, primarily to carbon monoxide, in acidic media.

Electrocatalytic Nitrate Reduction by a Cobalt Protoporphyrin Immobilized on a Pyrolytic Graphite Electrode

A series of simple molecular catalysts, i.e., Co(III), Fe(II), Ni(II), Cu(II), and Rh(II) protoporphyrins (metal-PP), directly adsorbed on pyrolytic graphite have been utilized for catalyzing the electrochemical reduction of nitrate. These catalysts are studied by combining cyclic voltammetry with online electrochemical mass spectrometry (OLEMS) to monitor volatile products and online ion chromatography (IC) to detect ionic products in the aqueous electrolyte solution. Among all investigated porphyrins, the Co-based protoporphyrin shows the highest selectivity toward hydroxylamine (NH2OH), which made it the catalyst of primary interest in the article. The reactivity and selectivity of the immobilized Co-protoporphyrin depend significantly on pH, with more acidic conditions leading to higher reactivity and higher selectivity toward hydroxylamine over ammonia. Potential controlled electrolysis results show that the potential also greatly influences the selectivity: at pH 1, hydroxylamine is the main product around -0.5 V with approximately 100% selectivity, while hydroxylamine and ammonia are both formed at a more negative potential, -0.75 V. The mechanism of the reaction is discussed, invoking of the possibility of two pathways for hydroxylamine/ammonia formation: a sequential pathway in which hydroxylamine is produced as an intermediate, with ammonia subsequently formed through the reduction of NH2OH/NH3OH(+), and a parallel pathway in which the formation of hydroxylamine and ammonia is derived from a common intermediate.

Computational electrochemistry: prediction of liquid-phase reduction potentials

This article reviews recent developments and applications in the area of computational electrochemistry. Our focus is on predicting the reduction potentials of electron transfer and other electrochemical reactions and half-reactions in both aqueous and nonaqueous solutions. Topics covered include various computational protocols that combine quantum mechanical electronic structure methods (such as density functional theory) with implicit-solvent models, explicit-solvent protocols that employ Monte Carlo or molecular dynamics simulations (for example, Car-Parrinello molecular dynamics using the grand canonical ensemble formalism), and the Marcus theory of electronic charge transfer. We also review computational approaches based on empirical relationships between molecular and electronic structure and electron transfer reactivity. The scope of the implicit-solvent protocols is emphasized, and the present status of the theory and future directions are outlined.

Spectroelectrochemistry of FeIII- and CoIII-mimochrome VI artificial enzymes immobilized on mesoporous ITO electrodes

UV-visible absorption spectroelectrochemistry elucidated the different redox behaviours of Fe^III- and Co^III-mimochrome VI artificial enzymes, adsorbed on mesoporous conductive films of ITO.

Significant effect of spin flip on the oxygen atom transfer reaction from (oxo)manganese(V) corroles to thioanisole: insights from density functional calculations

The electronic and structural features of (oxo)manganese(V) corroles and their catalyzed oxygen atom transfers to thioanisole in different spin states have been investigated by the B3LYP functional calculations. Calculations show that these corrole-based oxidants and their complexes with thioanisole generally have the singlet ground state, and their triplet forms are also accessible in consideration of the spin-orbit coupling interaction. Due to strong d-π conjugation interactions between Mn and the corrole ring arising from the π electron donation of the corrole moiety, the five-coordinated Mn approximately has the stable 18-electron configuration. The predicted free energy barriers for the singlet oxygen atom transfer reactions are generally larger than 22 kcal mol(-1), while the spin flip in reaction may remarkably increase the reactivity. In particular, the bromination on β-pyrrole carbon atoms of the meso-substituted (oxo)manganese(V) corrole strikingly enhances the spin-orbit coupling interaction and results in the dramatic increase of reactivity. The multiple spin changes are predicted to be involved in the low-energy reaction pathway. The present results show good agreement with the experimental observation and provide a detailed picture for the oxygen atom transfer reaction induced by the (oxo)manganese(V) corroles.

Study of Proton Coupled Electron Transfer in a Biomimetic Dimanganese Water Oxidation Catalyst with Terminal Water Ligands

The oxomanganese complex [H(2)O(terpy)Mn(III)(μ-O)(2)Mn(IV)(terpy)H(2)O](3+) (1, terpy = 2,2':6-2″-terpyridine) is a biomimetic model of the oxygen evolving complex of photosystem II with terminal water ligands. When bound to TiO(2) surfaces, 1 is activated by primary oxidants (e.g., Ce(4+)(aq), or oxone in acetate buffers) to catalyze the oxidation of water yielding O(2) evolution [G. Li et al. Energy Environ. Sci. 2, 230-238 (2009)]. The activation is thought to involve oxidation of the inorganic core [Mn(III)(μ-O)(2)Mn(IV)](3+) to generate the [Mn(IV)(μ-O)(2)Mn(IV)](4+) state 1(ox) first and then the highly reactive Mn oxyl species Mn(IV)O(•) through proton coupled electron transfer (PCET). Here, we investigate the step 1 → 1(ox) as compared to the analogous conversion in an oxomanganese complex without terminal water ligands, the [(bpy)(2) Mn (III) (μ-O)(2) Mn (IV) (bpy)(2)](3+) complex (2, bpy = 2,2'-bipyridyl). We characterize the oxidation in terms of free energy calculations of redox potentials and pKa's as directly compared to cyclic voltammogram measurements. We find that the pKa's of terminal water ligands depend strongly on the oxidation states of the Mn centers, changing by ~13 pH units (i.e., from 14 to 1) during the III, IV→IV, IV transition. Furthermore, we find that the oxidation potential of 1 is strongly dependent on pH (in contrast to the pH-independent redox potential of 2) as well as by coordination of Lewis base moieties (e.g., carboxylate groups) that competitively bind to Mn by exchange with terminal water ligands. The reported analysis of ligand binding free energies, pKa's and redox potentials indicates that the III, IV→IV, IV oxidation of 1 in the presence of acetate (AcO(-)) involves the following PCET: [H(2)O(terpy)Mn(III)(μ-O)(2)Mn(IV)(terpy)AcO](2+) → [HO(terpy)Mn(IV)(μ-O)(2)Mn(IV)(terpy)AcO](2+) + H(+) + e(-).

Characterization of proton coupled electron transfer in a biomimetic oxomanganese complex: Evaluation of the DFT B3LYP level of theory

The capabilities and limitations of the Becke-3-Lee-Yang-Parr (B3LYP) density functional theory (DFT) for modeling proton coupled electron transfer (PCET) in the mixed-valence oxomanganese complex 1 [(bpy)(2)Mn(III)(mu-O)(2)Mn(IV)(bpy)(2)](3+) (bpy = 2,2'-bipyridyl) are analyzed. Complex 1 serves as a prototypical synthetic model for studies of redox processes analogous to those responsible for water oxidation in the oxygen-evolving complex (OEC) of photosystem II (PSII). DFT B3LYP free energy calculations of redox potentials and pKa's are obtained according to the thermodynamic cycle formalism applied in conjunction with a continuum solvation model. We find that the pKa's of the oxo-ligands depend strongly on the oxidation states of the complex, changing by approximately 10 pH units (i.e., from pH~2 to pH~12) upon III,IV-->III,III reduction of complex 1. These computational results are consistent with the experimental pKa's determined by solution magnetic susceptibility and near-IR spectroscopy as well as with the pH dependence of the redox potential reported by cyclic voltammogram measurements, suggesting that the III,IV-->III,III reduction of complex 1 is coupled to protonation of the di-mu-oxo bridge as follows: [(bpy)(2)Mn(III)(mu-O)(2) Mn(IV)(bpy)(2)](3+)+H(+)+e(-)-->[(bpy)(2)Mn(III)(mu-O)(mu-OH)Mn(III)(bpy)(2)](3+). It is thus natural to expect that analogous redox processes might strongly modulate the pKa's of oxo and hydroxo/water ligands in the OEC of PSII, leading to deprotonation of the OEC upon oxidation state transitions.