Directing two-dimensional molecular crystallization using guest templates

Study on 2D Molecular Networks of Flexible Pentacarboxylic Acid Ligands Induced by Ether Bonds in Response to Selective Guest Inclusion

The flexibility of ligands allows for their bending, twisting, or rotation to adopt various conformations, leading to distinct symmetries during the self-assembled process. Flexible aromatic acid ligands modified by ether bonds are a promising type of self-assembled module when it comes to surfaces. Here, two pentacarboxylic acid ligands (H5L1 and H5L2) with minor skeleton differences have successfully self-assembled into disparate porous networks on the graphite surface and demonstrated excellent potential for the inclusion of guest molecules. The H5L1 molecule's network structure only accommodates coronene (COR) molecules. With fewer COR molecules, H5L1 molecules act as a host template to accommodate the COR molecules. When there are too many COR molecules, COR molecules will induce H5L1 molecules to transform into a new host-guest nanostructure. Additionally, H5L2 molecules showed the ability to capture C70 molecules and exhibited cavity selectivity. However, the assembled network of H5L2 was slightly deformed in attempts to trap the COR molecules. To understand these phenomena more deeply, various assembled mechanisms were analyzed in combination with building theoretical models and energy analysis. These results reveal the great potential of flexible aromatic acid ligands in two-dimensional self-assembly and host-guest systems for their application in related fields.

Anisotropic functionalized platelets: percolation, porosity and network properties

Anisotropic functionalized platelets are able to model the assembly behaviour of molecular systems in two dimensions thanks to the unique combination of steric and bonding constraints. The assembly scenarios can vary from open to close-packed crystals, finite clusters and chains, according to the features of the imposed constraints. In this work, we focus on the assembly of equilibrium networks. These networks can be seen as disordered, porous monolayers and can be of interest for instance in nano-filtration and optical applications. We investigate the formation and properties of two dimensional networks from shape anisotropic colloids functionalized with four patches. We characterize the connectivity properties, the typical local bonding motives, as well as the geometric features of the emerging networks for a large variety of different systems. Our results show that networks of shape anisotropic colloids assemble into highly versatile network topologies, that may be utilized for applications at the nanoscale.

Bidirectional Phase Transformation of Supramolecular Networks Using Two Molecular Signals

Reversible control of molecular self-assembly is omnipresent in adaptive biological systems, yet its realization in artificial systems remains a major challenge. Using scanning tunneling microscopy and density functional theory calculations, we show that a 2D supramolecular network formed by terthienobenzenetricarboxylic acid (TTBTA) can undergo a reversible structural transition between a porous and dense phase in response to different molecular signals (trimethyltripyrazolotriazine (TMTPT) and C₆₀). TMTPT molecules can induce a phase transition from the TTBTA honeycomb to the dense phase, whereas a reverse transition can be triggered by introducing C₆₀ molecules. This response stems from the selective association between signal molecules and TTBTA polymorphs. The successful realization of reversible molecular transformation represents important progress in controlling supramolecular surface nanostructures and could be potentially applicable in various areas of nanotechnology, including phase control, molecular sensing, and "smart" switchable surfaces.

Supramolecular Chemistry: Host-Guest Molecular Complexes

In recent times, researchers have emphasized practical approaches for capturing coordinated and selective guest entrap. The physisorbed nanoporous supramolecular complexes have been widely used to restrain various guest species on compact supporting surfaces. The host-guest (HG) interactions in two-dimensional (2D) permeable porous linkages are growing expeditiously due to their future applications in biocatalysis, separation technology, or nanoscale patterning. The different crystal-like nanoporous network has been acquired to enclose and trap guest molecules of various dimensions and contours. The host centers have been lumped together via noncovalent interactions (such as hydrogen bonds, van der Waals (vdW) interactions, or coordinate bonds). In this review article, we enlighten and elucidate recent progress in HG chemistry, explored via scanning tunneling microscopy (STM). We summarize the synthesis, design, and characterization of typical HG structural design examined on various substrates, under ambient surroundings at the liquid-solid (LS) interface, or during ultrahigh vacuum (UHV). We emphasize isoreticular complexes, vibrant HG coordination, or hosts functional cavities responsive to the applied stimulus. Finally, we critically discuss the significant challenges in advancing this developing electrochemical field.

Molecular dopant determines the structure of a physisorbed self-assembled molecular network

A small percentage of an impurity was shown, via scanning tunneling microscopy, to drastically change the on-surface self-assembly behavior of an aromatic tetracarboxylic acid, by initiating the nucleation and growth of a different polymorph. Molecular modelling simulations were used to shed further light onto the dopant-controlled assembly behaviour.

A Matter of Size and Placement: Varying the Patch Size of Anisotropic Patchy Colloids

Non-spherical colloids provided with well-defined bonding sites—often referred to as patches—are increasingly attracting the attention of materials scientists due to their ability to spontaneously assemble into tunable surface structures. The emergence of two-dimensional patterns with well-defined architectures is often controlled by the properties of the self-assembling building blocks, which can be either colloidal particles at the nano- and micro-scale or even molecules and macromolecules. In particular, the interplay between the particle shape and the patch topology gives rise to a plethora of tilings, from close-packed to porous monolayers with pores of tunable shapes and sizes. The control over the resulting surface structures is provided by the directionality of the bonding mechanism, which mostly relies on the selective nature of the patches. In the present contribution, we investigate the effect of the patch size on the assembly of a class of anisotropic patchy colloids—namely, rhombic platelets with four identical patches placed in different arrangements along the particle edges. Larger patches are expected to enhance the bond flexibility, while simultaneously reducing the bond selectivity as the single bond per patch condition—which would guarantee a straightforward mapping between local bonding arrangements and long-range pattern formation—is not always enforced. We find that the non-trivial interplay between the patch size and the patch position can either promote a parallel particle arrangement with respect to a non-parallel bonding scenario or give rise to a variety a bonded patterns, which destroy the order of the tilings. We rationalize the occurrence of these two different regimes in terms of single versus multiple bonds between pairs of particles and/or patches.

Simulations of the 2D self-assembly of tripod-shaped building blocks

We introduce a molecular dynamics (MD) coarse-grained model for the description of tripod building blocks. This model has been used by us already for linear, V-shape, and tetratopic molecules. We wanted to further extend its possibilities to trifunctional molecules to prove its versatility. For the chosen systems we have also compared the MD results with Monte Carlo results on a triangular lattice. We have shown that the constraints present in the latter method can enforce the formation of completely different structures, not reproducible with off-lattice simulations. In addition to that, we have characterized the obtained structures regarding various parameters such as theoretical diffraction pattern and average association number.

Trapping a pentagonal molecule in a self-assembled molecular network: an alkoxylated isosceles triangular molecule does the job

We herein report a unique example of on-surface adaptive self-assembly. A pentagon-shaped macrocycle, cyclic [5]meta-phenyleneacetylene [5]CMPA, is trapped by the adaptive supramolecular network formed by an isosceles triangular molecule, alkoxy substituted dehydrobenzo[14]annulene [14]ISODBA at the liquid/graphite interface, leading to a highly ordered and large-area bicomponent self-assembled molecular network (SAMN), as revealed by scanning tunneling microscopy (STM).

Design of Patchy Rhombi: From Close-Packed Tilings to Open Lattices

In the realm of functional materials, the production of two-dimensional structures with tunable porosity is of paramount relevance for many practical applications: surfaces with regular arrays of pores can be used for selective adsorption or immobilization of guest units that are complementary in shape and/or size to the pores, thus achieving, for instance, selective filtering or well-defined responses to external stimuli. The principles that govern the formation of such structures are valid at both the molecular and the colloidal scale. Here we provide simple design directions to combine the anisotropic shape of the building units-either molecules or colloids-and selective directional bonding. Using extensive computer simulations, we show that regular rhombic platelets decorated with attractive and repulsive interaction sites form specific tilings, going smoothly from close-packed arrangements to open lattices. The rationale behind the rich tiling scenario observed can be described in terms of steric incompatibilities, unsatisfied bonding geometries, and interplays between local and long-range order.

Formation of multicomponent 2D assemblies of C 2v-symmetric terphenyl tetracarboxylic acid at the solid/liquid interface: recognition, selection, and transformation

We report on the two-dimensional self-assembly of C_2v-symmetric [1,1′:3′,1′′-terphenyl]-3,3′′,5,5′′-tetracarboxylic acid (TPTA) at the solid/liquid interface by using scanning tunneling microscopy (STM). Two kinds of different self-assembly structure, i.e. a close-packed and porous rosette structure, are formed by TPTA molecules through intermolecular hydrogen bonds. When adding coronene (COR) as a guest into the TPTA assembly, structural transformation from a densely packed row structure to a rosette network structure is observed. It was found that two kinds of cavities with different sizes in the rosette network structure can be used to realize the selective co-adsorption of guest molecules with appropriate shape and size. Three-component 2D host–guest structures were successfully constructed by using 1,2,3,4,5,6-hexakis(4-bromophenyl)benzene (HBPBE) and copper phthalocyanine (CuPc) as guest molecules.

The formation process of multicomponent 2D assemblies of C_2v-symmetric terphenyl tetracarboxylic acid on a surface.

Halogenated building blocks for 2D crystal engineering on solid surfaces: lessons from hydrogen bonding

Halogen bonding has emerged as a promising tool in two-dimensional (2D) crystal engineering. Since halogen bonds are similar to hydrogen bonds in a number of aspects, the existing knowledge of hydrogen bonded systems can be applied to halogenated systems. Here we evaluate the applicability of a retrosynthetic approach based on topological similarity between hydrogen and halogen bonds to obtain predictable halogen bonded networks. The self-assembly of 1,3-dibromo-5-alkoxybenzene derivatives was studied in analogy with well-explored alkoxy isophthalic acids using a combination of experimental and theoretical tools. Scanning tunneling microscopy (STM) characterization of the networks formed at the liquid-graphite interface revealed that while the retrosynthetic approach works at the level of small clusters of molecules within the 2D network, the overall structure of the network deviates from the anticipated structure. The monolayers consist of fractured rows of halogen-bonded modules instead of the expected continuous lamellar structure. Each module consists of a discrete number of halogen-bonded molecules. The interactions responsible for the stabilization of halogen bonded dimers are delineated through detailed density functional theory (DFT) calculations coupled with natural bonding orbitals (NBO) and perturbation analysis. A modified force field that includes an extra charged site to imitate the σ hole on the halogen atom was developed and applied to extract total potential energies of the anticipated and observed networks. Plausible reasons for the deviation from the anticipated structure are discussed. Finally, a modified molecular design that allows successful application of the hydrogen bond-halogen bond analogy was tested experimentally.

Self-assembled flower structures formed by C3-symmetric aromatic carboxylic acids with meta-carboxyl groups

H₆BTE self-assembled into flower-like structures with two types of cavities at the HA/HOPG interface, and the guest molecule COR was only trapped in the A-type cavities at low and high concentrations of COR.

Probing functional self-assembled molecular architectures with solution/solid scanning tunnelling microscopy

Over the past two decades, solution/solid STM has made clear contributions to our fundamental understanding of the thermodynamic and kinetic processes that occur in molecular self-assembly at surfaces. As the field matures, we provide an overview of how solution/solid STM is emerging as a tool to elucidate and guide the use of self-assembled molecular systems in practical applications, focusing on small molecule device engineering, molecular recognition and sensing and electronic modification of 2D materials.

Surfaces with Controllable Topography and Chemistry Used as a Template for Protein Crystallization

Surfaces with controllable topography and chemistry were prepared to act as substrates for protein crystallization, in order to investigate the influence of these surface properties on the protein crystallization outcome. Three different methods were investigated to deposit 1,3,5-tris(10-carboxydecyloxy)benzene (TCDB) on a muscovite mica substrate to find the best route for controlled topography. Of these three, sublimation worked best. Contact angle measurements revealed that the surfaces with short exposure to the TCDB vapor (20 min or less) are hydrophilic, while surfaces exposed for 30 min or longer are hydrophobic. The hydrophilic surfaces are flat with low steps, while the hydrophobic surfaces contain macrosteps. Four model proteins were used for crystallization on the surfaces with controlled topography and chemistry. Hen egg white lysozyme crystals were less numerous on the surface with macrosteps than on smoother surfaces. On the other hand, insulin nucleated faster on the hydrophobic surfaces with macrosteps, and therefore, the crystals were more abundant and smaller. Bovine serum albumin and talin protein crystals were more numerous on all TCDB functionalized surfaces, compared to the reference clean muscovite mica surfaces. Overall, this shows that surface topography and chemistry is an important factor that partly determines the outcome in a protein crystallization experiment.

Host-guest chemistry in two-dimensional supramolecular networks

Nanoporous supramolecular networks physisorbed on solid surfaces have been extensively used to immobilize a variety of guest molecules. Host-guest chemistry in such two-dimensional (2D) porous networks is a rapidly expanding field due to potential applications in separation technology, catalysis and nanoscale patterning. Diverse structural topologies with high crystallinity have been obtained to capture molecular guests of different sizes and shapes. A range of non-covalent forces such as hydrogen bonds, van der Waals interactions, coordinate bonds have been employed to assemble the host networks. Recent years have witnessed a surge in the activity in this field with the implementation of rational design strategies for realizing controlled and selective guest capture. In this feature article, we review the development in the field of surface-supported host-guest chemistry as studied by scanning tunneling microscopy (STM). Typical host-guest architectures studied on solid surfaces, both under ambient conditions at the solution-solid interface as well as those formed at the ultrahigh vacuum (UHV)-solid interface, are described. We focus on isoreticular host networks, hosts functionalized pores and dynamic host-guest systems that respond to external stimuli.

Probing the in-air growth of large area of 3D functional structures into a 2D supramolecular nanoporous network

2D host–guest chemistry combined with drop-casting allows to trap functionalized 3D Zn–phthalocyanine complex into a large 2D porous supramolecular template.

Selective Adsorption of Coronene atop the Polycyclic Aromatic Diimide Monolayer Investigated by STM and DFT

The self-assemblies of polycyclic aromatic diimide (PAI) compounds on solid surfaces have attracted great interest because of the versatile and attractive properties for application in organic electronics. Here, a planar guest species (coronene) selectively adsorbs on the helicene-typed PAI1 monolayer strongly, depending on the conjugated cores of these PAIs. PAI1 molecule displays evidently a bowl structure lying on the highly oriented pyrolytic graphite surface due to the torsion of the "C"-shaped fused benzene rings. In combination with density functional theory calculation, the selective inclusion of coronene atop the backbone of the PAI1 array might be attributed to the bowl structure, which provides a groove for immobilizing coronene molecules. On the other planar densely packed arrays, it is difficult to observe the unstable adsorption of coronene. The selective addition of coronene molecules would be a strategic step toward the controllable multicomponent supramolecular architectures.

Frontiers of supramolecular chemistry at solid surfaces

Supramolecular chemistry on solid surfaces represents an exciting field of research that continues to develop in new and unexpected directions.

Complexity of two-dimensional self-assembled arrays at surfaces

The developing field of complexity in self-assembled systems on surfaces is discussed.

The impact of grafted surface defects and their controlled removal on supramolecular self-assembly

We demonstrate the use of covalently modified graphite as a convenient and powerful test-bed for the versatile investigation and control of 2-D crystallization at the liquid solid interface. Grafted aryls act as surface defects and create barriers to supramolecular self-assembly. An easily tunable grafting density allows for varying the effect of such defects on supramolecular self-assembly. Finally, the defects can be locally removed, triggering monolayer reconstructions and allowing in situ investigations of thermodynamically unstable or metastable morphologies.

A size, shape and concentration controlled self-assembling structure with host-guest recognition at the liquid-solid interface studied by STM

In the present investigation, we reported the fabrication of host networks formed by two newly prepared phenanthrene-butadiynylene macrocycles (PBMs) at the liquid-solid interface. Size, shape and concentration controlled experiments have been performed to investigate the PBMs/coronene (COR) host-guest system with the structural polymorphism phenomenon. Initially, PBM1 could form a regular linear network structure and PBM2 form a well-ordered nanoporous network structure. When the COR molecules were introduced, the self-assembled structure of PBM1 remained unchanged, while COR could be entrapped into the cavities of the PBM2 nanoporous network, and the co-assembly of the PBM2/COR host-guest systems underwent a structural transformation with the increase of concentration of COR. Scanning tunneling microscopy (STM) measurements and density functional theory (DFT) calculations are utilized to reveal the formation mechanism of the molecular nanoarrays controlled by the solution concentration.

In-solution patterning of standing up porphyrin based nanostructures within hydrogen bonded porous networks--a structural effect of a host matrix on guest entities

Through an all-solution process, we elaborate a host-guest system based on the self-assembly of a porphyrin derivative entrapped in a PTCDI-melamine porous network on Au(111). In contrast to the unpatterned molecular assembly, complementary STM and surface IR spectroscopy show that the host template modifies the packing and the tilt angle of porphyrin nanodomains.

Periodic Functionalization of Surface-Confined Pores in a Two-Dimensional Porous Network Using a Tailored Molecular Building Block

We present here the periodic functionalization of a two-dimensional (2D) porous molecular network using a tailored molecular building block. For this purpose, a dehydrobenzo[12]annulene (DBA) derivative, 1-isoDBA, having an isophthalic acid unit connected by an azobenzene linker to a C12 alkyl chain and five C14 chains, was designed and synthesized. After the optimization of monolayer preparation conditions at the 1,2,4-trichlorobezene (TCB)/graphite interface, scanning tunneling microscopy (STM) observation of the self-assembled monolayer of 1-isoDBA revealed the formation of extended domains of a porous honeycomb-type molecular network, which consists of periodically located nanowells each functionalized by a cyclic hexamer of hydrogen-bonded isophthalic acid units and those without functional groups. This result demonstrates that the present strategy based on precise molecular design is a viable route to site-specific functionalization of surface-confined nanowells. The nanowells of different size can be used for guest coadsorption of different guests, coronene COR and hexakis[4-(phenylethynyl)phenylethynyl]benzene HPEPEB, whose size and shape match the respective nanowells. STM observation of a ternary mixture (1-isoDBA/COR/HPEPEB) at the TCB/graphite interface revealed the site-selective immobilization of the two different guest molecules at the respective nanowells, producing a highly ordered three-component 2D structure.

Reversible Local and Global Switching in Multicomponent Supramolecular Networks: Controlled Guest Release and Capture at the Solution/Solid Interface

Dynamically switchable supramolecular systems offer exciting possibilities in building smart surfaces, the structure and thus the function of which can be controlled by using external stimuli. Here we demonstrate an elegant approach where the guest binding ability of a supramolecular surface can be controlled by inducing structural transitions in it. A physisorbed self-assembled network of a simple hydrogen bonding building block is used as a switching platform. We illustrate that the reversible transition between porous and nonporous networks can be accomplished using an electric field or applying a thermal stimulus. These transitions are used to achieve controlled guest release or capture at the solution-solid interface. The electric field and the temperature-mediated methods of guest release are operative at different length scales. While the former triggers the transition and thus guest release at the nanometer scale, the latter is effective over a much larger scale. The flexibility associated with physisorbed self-assembled networks renders this approach an attractive alternative to conventional switchable systems.

van der Waals-Induced Chromatic Shifts in Hydrogen-Bonded Two-Dimensional Porphyrin Arrays on Boron Nitride

The fluorescence of a two-dimensional supramolecular network of 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin (TCPP) adsorbed on hexagonal boron nitride (hBN) is red-shifted due to, primarily, adsorbate-substrate van der Waals interactions. TCPP is deposited from solution on hBN and forms faceted islands with typical dimensions of 100 nm and either square or hexagonal symmetry. The molecular arrangement is stabilized by in-plane hydrogen bonding as determined by a combination of molecular-resolution atomic force microscopy performed under ambient conditions and density functional theory; a similar structure is observed on MoS2 and graphite. The fluorescence spectra of submonolayers of TCPP on hBN are red-shifted by ∼30 nm due to the distortion of the molecule arising from van der Waals interactions, in agreement with time-dependent density functional theory calculations. Fluorescence intensity variations are observed due to coherent partial reflections at the hBN interface, implying that such hybrid structures have potential in photonic applications.

Solution concentration controlled self-assembling structure with host-guest recognition at the liquid-solid interface

In the present investigation, we reported the fabrication of a chicken-wire porous 2D network formed by triphenylene-2,6,10-tricarboxylic acid (H3TTCA) at the liquid-solid interface. When coronene (COR) molecules were added into the system, the H3TTCA honey-comb network was broken and the reconstructed structures of the H3TTCA/COR host-guest systems were subsequently formed. Scanning tunneling microscopic (STM) measurements and density function theory (DFT) calculations were utilized to reveal the structural variety in the co-assembly of H3TTCA/COR controlled by the solution concentration at 1-heptanoic acid/HOPG interface.

Formation of Multicomponent Star Structures at the Liquid/Solid Interface

To demonstrate key roles of multiple interactions between multiple components and multiple phases in the formation of an uncommon self-assembling pattern, we present here the construction of a porous hexagonal star (h-star) structure using a trigonal molecular building block at the liquid/solid interface. For this purpose, self-assembly of hexaalkoxy-substituted dehydrobenzo[12]annulene derivatives DBA-OCns was investigated at the tetradecane/graphite interface by means of scanning tunneling microscopy (STM). Monolayer structures were significantly influenced by coadsorbed tetradecane molecules depending on the alkyl chains length (C13-C16) of DBA-OCn. However, none of DBA-OCn molecules formed the expected trigonal complexes, indicating that an additional driving force is necessary for the formation of the trigonal complex and its assembly into the h-star structure. As a first approach, we employed the "guest induced structural change" for the formation of the h-star structure. In the presence of two guest molecules, nonsubstituted DBA and hexakis(phenylethynyl)benzene which fit the respective pores, an h-star structure was formed by DBA-OC15 at the tetradecane/graphite interface. Moreover, a tetradecane molecule was coadsorbed between a pair of alkyl chains of DBA-OC15, thereby blocking the interdigitation of the alkyl chain pairs. Therefore, the h-star structure results from the self-assembly of the four molecular components including the solvent molecule. The second approach is based on aggregation of perfluoroalkyl chains via fluorophilicity of DBA-F, in which the perfluoroalkyl groups are substituted at the end of three alkyl chains of DBA-OCn via p-phenylene linkers. A trigonal complex consisting of DBA-F and three tetradecane molecules formed an h-star structure, in which the perfluoroalkyl groups that orient into the alkane solution phase aggregated at the hexagonal pore via fluorophilicity. The present result provides useful insight into the design and control of complex molecular self-assembly at the liquid/solid interface.

Diarylethene Self-Assembled Monolayers: Cocrystallization and Mixing-Induced Cooperativity Highlighted by Scanning Tunneling Microscopy at the Liquid/Solid Interface

Stimulus control over 2D multicomponent molecular ordering on surfaces is a key technique for realizing advanced materials with stimuli-responsive surface properties. The formation of 2D molecular ordering along with photoisomerization was monitored by scanning tunneling microscopy at the octanoic acid/highly oriented pyrolytic graphite interface for a synthesized amide-containing diarylethene, which underwent photoisomerization between the open- and closed-ring isomers and also a side-reaction to give the annulated isomer. The nucleation (Kn) and elongation (Ke) equilibrium constants were determined by analysis of the concentration dependence of the surface coverage by using a cooperative model at the liquid/solid interface. It was found that the annulated isomer has a very large equilibrium constant, which explains the predominantly observed ordering of the annulated isomer. It was also found that the presence of the closed-ring isomer induces cooperativity into the formation of molecular ordering composed of the open-ring isomer. A quantitative analysis of the formation of ordering by using the cooperative model has provided a new view of the formation of 2D multicomponent molecular ordering.

Emergent rhombus tilings from molecular interactions with M-fold rotational symmetry

We show that model molecules with particular rotational symmetries can self-assemble into network structures equivalent to rhombus tilings. This assembly happens in an emergent way, in the sense that molecules spontaneously select irregular fourfold local coordination from a larger set of possible local binding geometries. The existence of such networks can be rationalized by simple geometrical arguments, but the same arguments do not guarantee a network's spontaneous self-assembly. This class of structures must in certain regimes of parameter space be able to reconfigure into networks equivalent to triangular tilings.

Multicomponent self-assembly with a shape-persistent N-heterotriangulene macrocycle on Au(111)

Multicomponent network formation by using a shape-persistent macrocycle (MC6) at the interface between an organic liquid and Au(111) surface is demonstrated. MC6 serves as a versatile building block that can be coadsorbed with a variety of organic molecules based on different types of noncovalent interactions at the liquid-solid interface. Scanning tunneling microscopy (STM) reveals the formation of crystalline bicomponent networks upon codeposition of MC6 with aromatic molecules, such as fullerene (C60) and coronene. Tetracyanoquinodimethane, on the other hand, was found to induce disorder into the MC6 networks by adsorbing on the rim of the macrocycle. Immobilization of MC6 itself was studied in two different noncovalently assembled host networks. MC6 assumed a rather passive role as a guest and simply occupied the host cavities in one network, whereas it induced a structural transition in the other. Finally, the central cavity of MC6 was used to capture C60 in a complex three-component system. Precise immobilization of organic molecules at discrete locations within multicomponent networks, as demonstrated here, constitutes an important step towards bottom-up fabrication of functional surface-based nanostructures.

Dibenzo crown ether layer formation on muscovite mica

Stable layers of crown ethers were grown on muscovite mica using the potassium-crown ether interaction. The multilayers were grown from solution and from the vapor phase and were analyzed with atomic force microscopy (AFM), matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry, and surface X-ray diffraction (SXRD). The results show that the first molecular layer of the three investigated dibenzo crown ethers is more rigid than the second because of the strong interaction of the first molecular layer with the potassium ions on the surface of muscovite mica. SXRD measurements revealed that for all of the investigated dibenzo crown ethers the first molecule lies relatively flat whereas the second lies more upright. The SXRD measurements further revealed that the molecules of the first layer of dibenzo-15-crown-5 are on top of a potassium atom, showing that the binding mechanism of this layer is indeed of the coordination complex form. The AFM and SXRD data are in good agreement, and the combination of these techniques is therefore a powerful way to determine the molecular orientation at surfaces.

Switchable supramolecular assemblies on graphene

We studied the self-assembly of trimesic acid on single- and few-layer graphene supported by SiO2 substrates. A scanning tunneling microscope operated under ambient conditions was utilized to image supramolecular networks of trimesic acid at liquid-graphene interfaces. Trimesic acid can self-assemble into large-scale, highly ordered adlayers on graphene surfaces. Phase transition of the trimesic acid adlayer from a close-packed structure to a porous chicken-wire structure was observed by changing from single- to few-layer graphene, which was attributed to the modulation of molecule-graphene interactions by the layer number of graphene. The guest-induced phase transition of trimesic acid by complexation with coronene on single-layer graphene further confirms that supramolecular networks on graphene can be rationally tailored with sub-nanometer resolution by balancing between intermolecular vs. molecule-graphene interactions. We further investigated the effects of trimesic acid adlayers on the electronic transport properties of graphene transistors. The adsorption of trimesic acid induces p-doping and defects in the adlayers cause scattering of charge carriers in single-layer graphene.

Fullerenes as adhesive layers for mechanical peeling of metallic, molecular and polymer thin films

We show that thin films of C60 with a thickness ranging from 10 to 100 nm can promote adhesion between a Au thin film deposited on mica and a solution-deposited layer of the elastomer polymethyldisolaxane (PDMS). This molecular adhesion facilitates the removal of the gold film from the mica support by peeling and provides a new approach to template stripping which avoids the use of conventional adhesive layers. The fullerene adhesion layers may also be used to remove organic monolayers and thin films as well as two-dimensional polymers which are pre-formed on the gold surface and have monolayer thickness. Following the removal from the mica support the monolayers may be isolated and transferred to a dielectric surface by etching of the gold thin film, mechanical transfer and removal of the fullerene layer by annealing/dissolution. The use of this molecular adhesive layer provides a new route to transfer polymeric films from metal substrates to other surfaces as we demonstrate for an assembly of covalently-coupled porphyrins.

Adaptive reorganization of 2D molecular nanoporous network induced by coadsorbed guest molecule

The ordered array of nanovoids in nanoporous networks, such as honeycomb, Kagome, and square, provides a molecular template for the accommodation of "guest molecules". Compared with the commonly studied guest molecules featuring high symmetry evenly incorporated into the template, guest molecules featuring lower symmetry are rare to report. Herein, we report the formation of a distinct patterned superlattice of guest molecules by selective trapping of guest molecules into the honeycomb network of trimesic acid (TMA). Two distinct surface patterns have been achieved by the guest inclusion induced adaptive reconstruction of a 2D molecular nanoporous network. The honeycomb networks can synergetically tune the arrangement upon inclusion of the guest molecules with different core size but similar peripherals groups, resulting in a trihexagonal Kagome or triangular patterns.

Control of a two-dimensional molecular structure by cooperative halogen and hydrogen bonds

The cooperative effect of hydrogen and halogen bonds on the two-dimensional (2D) molecular arrangement on highly oriented pyrolytic graphite (HOPG) was studied by scanning tunneling microscopy.

Kagome-like lattice of π–π stacked 3-hydroxyphenalenone on Cu(111)

Three-dimensional arrangement of 3-HPLN on a 2D surface, involving π–π stacking and perpendicular molecule attachment, results in a Kagome lattice.

Scanning probe image wizard: a toolbox for automated scanning probe microscopy data analysis

We describe SPIW (scanning probe image wizard), a new image processing toolbox for SPM (scanning probe microscope) images. SPIW can be used to automate many aspects of SPM data analysis, even for images with surface contamination and step edges present. Specialised routines are available for images with atomic or molecular resolution to improve image visualisation and generate statistical data on surface structure.

Packing of Isophthalate Tetracarboxylic Acids on Au(111): Rows and Disordered Herringbone Structures

Scanning tunnelling microscopy (STM) has been used to investigate the formation of hydrogen-bonded structures of the isophthalate tetracarboxylic acids, biphenyl-3,3',5,5'-tetracarboxylic acid (BPTC), terphenyl-3,3″,5,5″-tetracarboxylic acid (TPTC), and quarterphenyl-3,3‴,5,5‴-tetracarboxylic acid (QPTC), via deposition from solution onto Au(111). STM data reveal that ordered structures can be formed from an aqueous solution leading to the formation of rows for the shortest acid BPTC, while the longer molecules TPTC and QPTC adopt a herringbone-like structure with significant degrees of disorder. The influence of solvent and substrate on the molecular ordering is discussed, and density functional theory is used to identify molecular models for these new phases.

Development of structural complexity by liquid-crystal self-assembly

Since the discovery of the liquid-crystalline state of matter 125 years ago, this field has developed into a scientific area with many facets. This Review presents recent developments in the molecular design and self-assembly of liquid crystals. The focus is on new exciting soft-matter structures distinct from the usually observed nematic, smectic, and columnar phases. These new structures have enhanced complexity, including multicompartment and cellular structures, periodic and quasiperiodic arrays of spheres, and new emergent properties, such as ferroelctricity and spontaneous achiral symmetry-breaking. Comparisons are made with developments in related fields, such as self-assembled monolayers, multiblock copolymers, and nanoparticle arrays. Measures of structural complexity used herein are the size of the lattice, the number of distinct compartments, the dimensionality, and the logic depth of the resulting supramolecular structures.

Temperature-induced structural phase transitions in a two-dimensional self-assembled network

Two-dimensional (2D) supramolecular self-assembly at liquid-solid interfaces is a thermodynamically complex process producing a variety of structures. The formation of multiple network morphologies from the same molecular building blocks is a common occurrence. We use scanning tunnelling microscopy (STM) to investigate a structural phase transition between a densely packed and a porous phase of an alkylated dehydrobenzo[12]annulene (DBA) derivative physisorbed at a solvent-graphite interface. The influence of temperature and concentration are studied and the results combined using a thermodynamic model to measure enthalpy and entropy changes associated with the transition. These experimental results are compared to corresponding values obtained from simulations and theoretical calculations. This comparison highlights the importance of considering the solvent when modeling porous self-assembled networks. The results also demonstrate the power of using structural phase transitions to study the thermodynamics of these systems and will have implications for the development of predictive models for 2D self-assembly.

Two-dimensional self-assembly of a symmetry-reduced tricarboxylic acid

Investigations of the self-assembly of simple molecules at the solution/solid interface can provide useful insight into the general principles governing supramolecular chemistry in two dimensions. Here, we report on the assembly of 3,4',5-biphenyl tricarboxylic acid (H3BHTC), a small hydrogen bonding unit related to the much-studied 1,3,5-benzenetricarboxylic acid (trimesic acid, TMA), which we investigate using scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. STM images show that H3BHTC assembles by itself into an offset zigzag chain structure that maximizes the surface molecular density in favor of maximizing the number density of strong cyclic hydrogen bonds between the carboxylic groups. The offset geometry creates "sticky" pores that promote solvent coadsorption. Adding coronene to the molecular solution produces a transformation to a high-symmetry host-guest lattice stabilized by a dimeric/trimeric hydrogen bonding motif similar to the TMA flower structure. Finally, we show that the H3BHTC lattice firmly immobilizes the guest coronene molecules, allowing for high-resolution imaging of the coronene structure.

Steering supramolecular patterns by nucleobase-terminated molecules

Supramolecular patterns formed by adsorption from a liquid of nucleobase-terminated molecular rods on a graphite surface were investigated by scanning tunneling microscopy.