Solution studies of trimetallic lanthanide luminescent anion sensors: towards ratiometric sensing using an internal reference channel

Orthogonal binding and displacement of different guest types using a coordination cage host with cavity-based and surface-based binding sites

The octanuclear Co(ii) cubic coordination cage system H (or HW if it bears external water-solubilising substituents) has two types of binding site for guests. These are (i) the partially-enclosed central cavity where neutral hydrophobic organic species can bind, and (ii) the six 'portals' in the centres of each of the faces of the cubic cage where anions bind via formation of a network of CH⋯X hydrogen bonds between the anion and CH units on the positively-charged cage surface, as demonstrated by a set of crystal structures. The near-orthogonality of these guest binding modes provides the basis for an unusual dual-probe fluorescence displacement assay in which either a cavity-bound fluorophore (4-methyl-7-amino-coumarin, MAC; λ_em = 440 nm), or a surface-bound anionic fluorophore (fluorescein, FLU; λ_em = 515 nm), is displaced and has its emission ‘switched on’ according to whether the analyte under investigation is cavity-binding, surface binding, or a combination of both. A completely orthogonal system is demonstrated based using a Hw/MAC/FLU combination: addition of the anionic analyte ascorbate displaced solely FLU from the cage surface, increasing the 515 nm (green) emission component, whereas addition of a neutral hydrophobic guest such as cyclooctanone displaced solely MAC from the cage central cavity, increasing the 440 nm (blue) emission component. Addition of chloride results in some release of both components, and an intermediate colour change, as chloride is a rare example of a guest that shows both surface-binding and cavity-binding behaviour. Thus we have a colourimetric response based on differing contributions from blue and green emission components in which the specific colour change signals the binding mode of the analyte. Addition of a fixed red emission component from the complex [Ru(bipy)₃]²⁺ (Ru) provides a baseline colour shift of the overall colour of the luminescence closer to neutral, meaning that different types of guest binding result in different colour changes which are easily distinguishable by eye.

Orthogonal binding of neutral or anionic fluorophores to the cavity or surface, respectively, of a coordination cage host allows a dual-probe displacement assay which gives a different fluorescence colorimetric response according to where analyte species bind.

Highlights of the development and application of luminescent lanthanide based coordination polymers, MOFs and functional nanomaterials

The development of lanthanide based coordination polymer and metal-organic framework (CPs and MOFs) nanomaterials as novel functional (e.g. luminescent and magnetic) materials has attracted significant attention in recent times. This is in part due to the wide, but yet unique coordination requirements that the f-metal ions possess, as well as their attractive physical properties, which are often transferred to the bulk material. Hence, there is no surprise, that the design, synthesis and characterisation of lanthanide based CP/MOF materials (featuring either 'pure' lanthanides, or a mixture of both f- and d-metal ions) for applications in gas and small molecule absorption, storage, conversion/catalysis, chemical sensing, bio-imaging, drug delivery, etc. has been a prominent feature in the scientific literature. In this review, we give a selected overview of some of the recent developments in the area of Ln CP/MOF based nanomaterials for sensing, optical materials and bio-medicine research, as well as making reference to some more established examples, with the view of introducing, particularly to new researchers to the field, the powerful and attractive features of lanthanide based materials.

Construction of a crystalline 14-metal Zn–Nd rectangular nanocluster with a dual-emissive response towards metal ions

A crystalline 14-metal Zn–Nd cluster [Zn₆Nd₈L₂(OAc)₂₀(O)₂(NO₃)₄(OC₂H₅)₄] (1) was constructed using a flexible Schiff base ligand with long-chain (CH₂)₂O(CH₂)₂O(CH₂)₂ backbone. 1 exhibits a nanoscale rectangular structure (10 × 14 × 18 Å). Besides the visible ligand-centered emission, 1 displays typical NIR luminescence of Nd³⁺. Interestingly, 1 shows both a ligand-centered and lanthanide fluorescence response towards metal ions, especially to K⁺ and Co²⁺ at the ppm level.

A crystalline 14-metal Zn–Nd nanocluster was constructed, and it shows ligand-centered and lanthanide fluorescence response towards metal ions.

Solid-state sensors based on Eu3+-containing supramolecular polymers with luminescence colour switching capability

Polymers that exhibit changes of their luminescence colour in response to external stimuli are attractive candidates for sensing systems. We herein report the preparation of europium-based metallosupramolecular polymers, which can be processed into films and coatings that display readily detectable luminescence colour changes in response to various types of analytes.

White-light emission from discrete heterometallic lanthanide-directed self-assembled complexes in solution

Herein, we have developed a white-light-emitting system based on the formation of discrete lanthanide-based self-assembled complexes using a newly-designed ligand. We demonstrate that fine tuning of the lanthanide ions molar ratio in the self-assemblies combined with the intrinsic blue fluorescence of the ligand allows for the successful emission of pure white light with CIE coordinates of (0.33, 0.34).

White-light-emitting materials have attracted significant interest in recent years due to their potential applications in solid-state lighting and flat-panel displays. Design of such materials is challenging and often relies on the use of multiple fluorophores despite the fact that single component systems yield materials with enhanced stability and reproducibility. Herein, we have developed a white-light-emitting system based on the formation of discrete lanthanide-based self-assembled complexes using a newly-designed ligand. We demonstrate that fine tuning of the lanthanide ions molar ratio in the self-assemblies combined with the intrinsic blue fluorescence of the ligand allows for the successful emission of pure white light with CIE coordinates of (0.33, 0.34).

Selective Sensing of Tyrosine Phosphorylation in Peptides Using Terbium(III) Complexes

Phosphorylation of tyrosine residues in proteins, as well as their dephosphorylation, is closely related to various diseases. However, this phosphorylation is usually accompanied by more abundant phosphorylation of serine and threonine residues in the proteins and covers only 0.05% of the total phosphorylation. Accordingly, highly selective detection of phosphorylated tyrosine in proteins is an urgent subject. In this review, recent developments in this field are described. Monomeric and binuclear Tb(III) complexes, which emit notable luminescence only in the presence of phosphotyrosine (pTyr), have been developed. There, the benzene ring of pTyr functions as an antenna and transfers its photoexcitation energy to the Tb(III) ion as the emission center. Even in the coexistence of phosphoserine (pSer) and phosphothreonine (pThr), pTyr can be efficintly detected with high selectivity. Simply by adding these Tb(III) complexes to the solutions, phosphorylation of tyrosine in peptides by protein tyrosine kinases and dephosphorylation by protein tyrosine phosphatases can be successfully visualized in a real-time fashion. Furthermore, the activities of various inhibitors on these enzymes are quantitatively evaluated, indicating a strong potential of the method for efficient screening of eminent inhibitors from a number of candidates.

Displacement assay detection by a dimeric lanthanide luminescent ternary Tb(III)-cyclen complex: high selectivity for phosphate and nitrate anions

The luminescent dimeric ternary lanthanide–cyclen complexes (2-(Ln.1)2; Ln = Tb/Eu) were designed and both their self-assembly formation and their ability to detect anions via displacement assays were investigated using spectrophotometric titrations in MeOH solution. The formation of 2-(Tb.1)2 and 2-(Eu.1)2 was investigated in solution, and determination of the binding constants and stoichiometry showed that the former was formed almost exclusively over the 1:1 complex 2-(Tb.1) after the addition of two equivalents of 2; while for 2-(Eu.1)2 a mixture of both stoichiometries existed even after the addition of four equivalents of 2. Of these two systems, 2-(Tb.1)2 was studied in details as a probe for anions, where significant changes where observed in the photophysical properties of the complex; with the characteristic Tb(III)-centred emission being fully switched off upon the sensing of phosphates and nitrate, giving rise to the formation of a H2PO4(-):Tb.1 complex in a 1:2 stoichiometry upon sensing of H2PO4(-) by 2-(Tb.1)2, while NO3(-) gave 1:1 complex formation and two equivalents of NO3(-)·Tb.1.

Turning an aptamer into a light-switch probe with a single bioconjugation

We describe a method for transforming a structure-switching aptamer into a luminescent light-switch probe via a single conjugation. The methodology is demonstrated using a known aptamer for Hg²⁺ as a case study. This approach utilizes a lanthanide-based metallointercalator, Eu-DOTA-Phen, whose luminescence is quenched almost entirely and selectively by purines, but not at all by pyrimidines. This complex, therefore, does not luminesce while intercalated in dsDNA, but it is bright red when conjugated to a ssDNA that is terminated by several pyrimidines. In its design, the light-switch probe incorporates a structure-switching aptamer partially hybridized to its complementary strand. The lanthanide complex is conjugated to either strand via a stable amide bond. Binding of the analyte by the structure-switching aptamer releases the complementary strand. This release precludes intercalation of the intercalator in dsDNA, which switches on its luminescence. The resulting probe turns on 21-fold upon binding to its analyte. Moreover, the structure switching aptamer is highly selective, and the long luminescence lifetime of the probe readily enables time-gating experiments for removal of the background autofluorescence of the sample.

Determination of fluoroquinolone antibiotics through the fluorescent response of Eu(III) based nanoparticles fabricated by layer-by-layer technique

The present work introduces the determination of fluoroquinolone antibiotics (FQs) in aqueous solutions through the fluorescent response of Eu(TTA)3 and [Eu(TTA)(3)1] (TTA(-) and 1 are thenoyltrifluoroacetonate and phosphine oxide derivative) complexes encapsulated into the polyelectrolyte capsules fabricated through layer-by-layer deposition of poly(sodium 4-styrenesulfonate) (PSS) and polyethyleneimine (PEI). The variation of luminescent core, polyelectrolyte deposition and concentration conditions reveals two modes of fluorescent response on FQs of diverse structure namely the sensitization and quenching of Eu(III) centered luminescence. The obtained regularities reveal the ternary complex formation and the ligand exchange occurring at the interface of polyelectrolyte coated [Eu(TTA)(3)1] based colloids as the reasons of the diverse fluorescent response of Eu(III) centered luminescence on FQs. The factors affecting the fluorescent response have been revealed, which are: the content of luminescent core, the mode of polyelectrolyte deposition, concentration and structure of FQs. The discrimination of moxifloxacin and lomefloxacin from levofloxacin, ofloxacin, difloxacin, perfloxacin through the quenching of Eu(III) luminescence in PSS-[Eu(TTA)(3)1] colloids has been revealed.

Luminescent Terbium Contrast Agent for Bone Microdamage Detection

The synthesis and photophysical evaluation of a new lanthanide luminescence imaging agent is presented. The agent, a terbium-based cyclen complex can, through the use of an iminodiacetate moiety, bind to damaged bone surface via chelation to exposed Ca(ii) sites, enabling the imaging of the damage using confocal fluorescence scanning microscopy.

Luminescent self-assembly formation on a gold surface observed by reversible 'off-on' switching of Eu(III) emission

The formation of a self-assembly between a sensitising antenna and an Eu(III) functionalised cyclen complex 1.Eu, tethered to a gold surface via a C(12) alkyl thiol spacer, is described where changes in the Eu(III) emission signal the formation, and dissociation, of a ternary complex.