Protein modulation of electrochemical signals: application to immunobiosensing

High toughness resorbable brushite-gypsum fiber-reinforced cements

The ideal bone substitute material should be mechanically strong, biocompatible with a resorption rate matching the rate of new bone formation. Brushite (dicalcium phosphate dihydrate) cement is a promising bone substitute material but with limited resorbability and mechanical properties. To improve the resorbability and mechanical performance of brushite cements, we incorporated gypsum (calcium sulfate dihydrate) and diazonium-treated polyglactin fibers which are well-known for their biocompatibility and bioresorbability. Here we show that by combining brushite and gypsum, we were able to fabricate biocompatible composite cements with high fracture toughness (0.47 MPa·m^1/2) and a resorption rate that matched the rate of new bone formation. Adding functionalized polyglactin fibers to this composite cement further improved the fracture toughness up to 1.00 MPa·m^1/2. XPS and SEM revealed that the improvement in fracture toughness is due to the strong interfacial bonding between the functionalized fibers and the cement matrix. This study shows that adding gypsum and functionalized polyglactin fibers to brushite cements results in composite biomaterials that combine high fracture toughness, resorbability, and biocompatibility, and have great potential for bone regeneration.

Shape controlled assembly of carboxylic acids: formation of a binary monolayer by intercalation into molecular nanotunnels

Binary self-assembled monolayers (SAMs) combining a Y-shaped aromatic carboxylic acid (1,3,5-benzenetribenzoic acid, H3BTB) and a cage-type alicyclic carboxylic acid (adamantane carboxylic acid, AdCA) were investigated by scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The SAMs, prepared by molecular adsorption from solution on Au substrates modified by underpotential deposition of Ag, exhibit a pronounced dependence of their structure on the assembly protocol. Exposing an H3BTB SAM to AdCA, the highly regular row structure of the native H3BTB layer persists and STM imaging does not show signs of AdCA adsorption. This is in striking contrast to the disordered arrangements of H3BTB and the presence of AdCA employing the inverted adsorption sequence or coadsorption of the two molecules. However, spectroscopic analysis of the H3BTB SAM exposed to AdCA reveals the presence also of the latter, suggesting that the AdCA molecules are hidden in the nanotunnels of the H3BTB monolayer. Direct evidence for the intercalation of AdCA is obtained by STM manipulation experiments which lay bare areas of AdCA molecules upon local removal of H3BTB. Surprisingly, these are densely packed and arranged into a highly ordered monolayer. Formation of such a compact AdCA layer is explained by expulsion of AdCA from the H3BTB nanotunnels of the surrounding intact mixed SAM, driven by release of stress in the nanotunnels built up when AdCA is intercalated.

Versatile electrochemical approaches towards the fabrication of molecular electronic devices

We highlight state-of-the-art electrochemical approaches for diazonium electroreduction on various electrodes that may be suitable for flexible molecular electronic junctions.

Nanostructure-based Sensitive Electrochemical Immunosensors

It is well-known that electrochemical immunosensors have many advantages, including but not limited to high sensitivity, simplicity in application, low-cost production, automated control and potential miniaturization. Due to specific antigen–antibody recognition, electrochemical immunosensors also have provided exceptional possibilities for real-time trace detection of analytical biotargets, which consists of small molecules (such as natural toxins and haptens), macromolecules, cells, bacteria, pathogens or viruses. Recently, the advances in the development of electrochemical immunosensors can be classified into the following directions: the first is using electrochemical detection techniques (voltammetric, amperometric, impedance spectroscopic, potentiometric, piezoelectric, conductometric and alternating current voltammetric) to achieve high sensitivity regarding the electrochemical change of electrochemical signal transduction; the second direction is developing sensor configurations (microfluidic and paper-based platforms, microelectrodes and electrode arrays) for simultaneous multiplex high-throughput analyses; and the last is designing nanostructured materials serving as sensing interfaces to improve sensor sensitivity and selectivity. This chapter introduces the working principle and summarizes the state-of-the-art of electrochemical immunosensors during the past few years with practically relevant details for: (a) metal nanoparticle- and quantum dot-labeled immunosensors; (b) enzyme-labeled immunosensors; and (c) magnetoimmunosensors. The importance of various types of nanomaterials is also thoroughly reviewed to obtain an insight into understanding the theoretical basis and practical orientation for the next generation of diagnostic devices.

Integrated Affinity Biosensing Platforms on Screen-Printed Electrodes Electrografted with Diazonium Salts

Adequate selection of the electrode surface and the strategies for its modification to enable subsequent immobilization of biomolecules and/or nanomaterials integration play a major role in the performance of electrochemical affinity biosensors. Because of the simplicity, rapidity and versatility, electrografting using diazonium salt reduction is among the most currently used functionalization methods to provide the attachment of an organic layer to a conductive substrate. This particular chemistry has demonstrated to be a powerful tool to covalently immobilize in a stable and reproducible way a wide range of biomolecules or nanomaterials onto different electrode surfaces. Considering the great progress and interesting features arisen in the last years, this paper outlines the potential of diazonium chemistry to prepare single or multianalyte electrochemical affinity biosensors on screen-printed electrodes (SPEs) and points out the existing challenges and future directions in this field.

Advances on Aryldiazonium Salt Chemistry Based Interfacial Fabrication for Sensing Applications

Aryldiazonium salts as coupling agents for surface chemistry have evidenced their wide applications for the development of sensors. Combined with advances in nanomaterials, current trends in sensor science and a variety of particular advantages of aryldiazonium salt chemistry in sensing have driven the aryldiazonium salt-based sensing strategies to grow at an astonishing pace. This review focuses on the advances in the use of aryldiazonium salts for modifying interfaces in sensors and biosensors during the past decade. It will first summarize the current methods for modification of interfaces with aryldiazonium salts, and then discuss the sensing applications of aryldiazonium salts modified on different transducers (bulky solid electrodes, nanomaterials modified bulky solid electrodes, and nanoparticles). Finally, the challenges and perspectives that aryldiazonium salt chemistry is facing in sensing applications are critically discussed.

Effects of Surface Epitope Coverage on the Sensitivity of Displacement Assays that Employ Modified Nanoparticles: Using Bisphenol A as a Model Analyte

With the ever-increasing use of nanoparticles in immunosensors, a fundamental study on the effect of epitope density is presented herein, with a small molecule epitope, on the performance of the displacement assay format in an enzyme-linked immunosorbent assay (ELISA). Thiolated bisphenol A (BPA) functionalized gold nanoparticles (cysBPAv-AuNPs) and specific anti-BPA antibodies are employed for this purpose. It is shown that the displacement of cysBPAv-AuNPs bound to the immobilized antibodies was influenced by both the avidity of bound cysBPAv-AuNPs and the concentration of free BPA to displace it. The importance of surface epitope density was that it changed the number of epitopes in close proximity to the antibody-binding site. This then influenced the avidity of cysBPAv-AuNPs bound to the immobilized antibody. Furthermore, the molar epitope concentration in an assay appears to affect the degree of antibody binding site saturation. Controlling surface epitope density of the functionalized nanoparticles and molar epitope concentration in an assay leads to a decrease of the concentration of free BPA required to displace the bound cysBPAv-AuNP, and hence better assay performance with regards to the D50 value and dynamic range in the displacement assay.

Strategies To Achieve Control over the Surface Ratio of Two Different Components on Modified Electrodes Using Aryldiazonium Salts

Controlling the composition of an interface is very important in tuning the chemical and physical properties of a surface in many applications including biosensors, biomaterials, and chemical catalysis. Frequently, this requires one molecular component to a minor component in a mixed layer. Such subtle control of composition has been difficult to achieve using aryldiazonium salts. Herein, aryldiazonium salts of carboxyphenyl (CP) and phenylphosphorylcholine (PPC), generated in situ from their corresponding anilines, are electrografted to form molecular platform that are available for further functionalization. These two components are chosen because CP provides a convenient functionality for further coupling of biorecognition species while PPC offers resistance to nonspecific adsorption of proteins to the surface. Mixed layers of CP and PPC were prepared by grafting them either simultaneously or consecutively. The latter strategy allows an interface to be developed in a controlled way where one component is at levels of less than 1% of the total layer.

Toward the Control of the Creation of Mixed Monolayers on Glassy Carbon Surfaces by Amine Oxidation

A versatile and simple methodology for the creation of mixed monolayers on glassy carbon (GC) surfaces was developed, using an osmium-bipyridyl complex and anthraquinone as model redox probes. The work consisted in the electrochemical grafting on GC of a mixture of mono-protected diamine linkers in varying ratios which, after attachment to the surface, allowed orthogonal deprotection. After optimisation of the deprotection conditions, it was possible to remove one of the protecting groups selectively, couple a suitable osmium complex and cap the residual free amines. The removal of the second protecting group allowed the coupling of anthraquinone. The characterisation of the resulting surfaces by cyclic voltammetry showed the variation of the surface coverage of the two redox centres in relation to the initial ratio of the linking amine in solution.

Diazonium cation-exchanged clay: an efficient, unfrequented route for making clay/polymer nanocomposites

We describe a simple, off-the-beaten-path strategy for making clay/polymer nanocomposites through tandem diazonium salt interface chemistry and radical photopolymerization. Prior to photopolymerization, sodium montmorillonite (MMT) was ion exchanged with N,N'-dimethylbenzenediazonium cation (DMA) from the tetrafluoroborate salt precursor. DMA acts as a hydrogen donor for benzophenone in solution; this pair of co-initiators permits us to photopolymerize glycidyl methacrylate (GMA) between the lamellae of the diazonium-modified clay, therefore providing intercalated MMT-PGMA nanocomposites with an onset of exfoliation. This work conclusively provides a new approach for bridging reactive and functional polymers to layered nanomaterials via aryl diazonium salts in a simple, fast, efficient cation-exchange approach.

The influence of organic-film morphology on the efficient electron transfer at passivated polymer-modified electrodes to which nanoparticles are attached

The impact of polymer-film morphology on the electron-transfer process at electrode/organic insulator/nanomaterial architectures is studied. The experimental data are discussed in the context of the most recent theory modelling the nanoparticle-mediated electron-transfer process at electrode/insulator/nanomaterial architectures proposed by Chazalviel and Allongue [J. Am. Chem. Soc. 2011, 133, 762-764]. A previous report [Anal. Chem. 2013, 85, 1073-1080] by us qualitatively verified the theory and demonstrates a transition from thickness-independent to thickness-dependent electron transfer as the layer thickness exceeds a certain threshold. This follow-up study explores a different polymer, poly(phenylenediamine), and focuses on the effect of the uniformity of organic film on electron transfer at these hybrid structures. Electron-transfer kinetics of modified surfaces, which were assessed using the redox species Ru(NH3)6(3+) in aqueous solution, showed that a thickness-dependent electron-transfer regime is achieved with poly(phenylenediamine). This is attributed to the sufficiently thin films never being fabricated with this polymer. Rather, it is suggested that thin poly(phenylenediamine) layers have a globular structure with poor film homogeneity and pinhole defects.

The impact of antibody/epitope affinity strength on the sensitivity of electrochemical immunosensors for detecting small molecules

A displacement immunoassay involves having a labelled analogue of the analyte (the epitope) already bound to the antibody. The presence of the analyte causes a competition for antibodies, and some of the antibodies dissociates from the epitope so that it can bind with the analyte. Herein, the influence of the affinity of the surface-bound epitope for the antibody on the sensitivity and selectivity of a displacement immunosensor is explored both theoretically and experimentally. An electrochemical immunosensor described previously, where the dissociation of antibodies from an electrode surface causes an increase in current from surface-bound ferrocene species, is used for this purpose. As expected, the ease and effectiveness of the bound antibody being displaced is inversely related to the affinity of the antibody to the surface-bound epitope relative to the analyte in solution as expected. However, if the affinity constant is too low, selectivity and/or sensitivity are compromised. Experimental results are qualitatively compared with a simple mass-action model.

Towards the fabrication of a label-free amperometric immunosensor using SWNTs for direct detection of paraoxon

A label-free immunosensor based on SWNTs modified GC electrodes has been developed for the direct detection of paraoxon. Based on aryldiazonium salt chemistry, forest of SWNTs can be vertically aligned on mixed monolayers of aryldiazonium salt modified GC electrodes by C-C bonding, which provides an interface showing efficient electron transfer between biomolecules. PEG molecules were introduced to the interface to resist non-specific protein adsorption. Ferrocenedimethylamine (FDMA) was subsequently attached to the ends of SWNTs through the amide bonding followed by the attachment of epitope i.e., paraoxon hapten to which a paraoxon antibody would bind. This immunosensor shows good selectivity and high specificity to paraoxon, and is functional for the detection of paraoxon in both laboratory and field by a displacement assay. There is a linear relationship between electrochemical signal of FDMA and the concentration of paraoxon over the range of 2-2500 ppb with a lowest detected limit of 2 ppb in 0.1 M phosphate buffer at pH 7.0. The SWNTs based amperometric immunosensor provides an opportunity to develop the sensing system for on-site sensitive detection of a spectrum of insecticides.

Diazonium salt-derived 4-(dimethylamino)phenyl groups as hydrogen donors in surface-confined radical photopolymerization for bioactive poly(2-hydroxyethyl methacrylate) grafts

In this paper we describe a novel methodology for grafting polymers via radical photopolymerization initiated on gold surfaces by aryl layers from diazonium salt precursors. The parent 4-(dimethylamino)benzenediazonium salt was electroreduced on a gold surface to provide 4-(dimethylamino)phenyl (DMA) hydrogen donor layers; free benzophenone in solution was used as a photosensitizer to strip hydrogen from the grafted DMA. This system permitted efficient surface initiation of photopolymerization of 2-hydroxyethyl methacrylate. The resulting poly(2-hydroxyethyl methacrylate) (PHEMA) grafts were found to be very adherent to the surface as they resist total failure after being soaked in the well-known paint stripper methyl ethyl ketone. The PHEMA grafts were reacted with 1,1'-carbonyldiimidazole to yield carbamate groups that are able to react readily with amino groups from proteins. The final surface consisted of protein-functionalized PHEMA grafts where bovine serum albumin (BSA) protein is specifically linked to the grafts by covalent bonds. We used X-ray photoelectron spectroscopy to monitor the chemical changes at the gold surface all along the process from the neat gold to the end-protein-functionalized polymer grafts: the PHEMA graft thickness ranged from 7 to 27 nm, and the activation by 1,1'-carbonyldiimidazole reached 37% of the OH groups, which was sufficient for 90% surface coverage of the grafts by BSA. This work conclusively provides a new approach for bridging reactive and functional polymers to surfaces via aryl diazonium salts in a simple, fast, and efficient approach of importance in biomedical and other applications.