Immobilized Keratin HPLC Stationary Phase-A Forgotten Model of Transdermal Absorption: To What Molecular and Biological Properties Is It Relevant?

Chromatographic retention data collected on immobilized keratin (KER) or immobilized artificial membrane (IAM) stationary phases were used to predict skin permeability coefficient (log Kp) and bioconcentration factor (log BCF) of structurally unrelated compounds. Models of both properties contained, apart from chromatographic descriptors, calculated physico-chemical parameters. The log Kp model, containing keratin-based retention factor, has slightly better statistical parameters and is in a better agreement with experimental log Kp data than the model derived from IAM chromatography; both models are applicable primarily to non-ionized compounds.Based on the multiple linear regression (MLR) analyses conducted in this study, it was concluded that immobilized keratin chromatographic support is a moderately useful tool for skin permeability assessment.However, chromatography on immobilized keratin may also be of use for a different purpose-in studies of compounds' bioconcentration in aquatic organisms.

Liposomes: preparation and characterization with a special focus on the application of capillary electrophoresis

Liposomes are nowadays a matter of tremendous interest. Due to their amphiphilic character, various substances with different properties can be incorporated into them and they are especially suitable as a model system for controlled transport of bioactive substances and drugs to the final destination in the body; for example, COVID-19 vaccines use liposomes as a carrier of mRNA. Liposomes mimicking composition of various biological membranes can be prepared with a proper choice of the lipids used, which proved to be important tool in the early drug development. This review deals with commonly used methods for the preparation and characterization of liposomes which is essential for their later use. The alternative capillary electrophoresis methods for physico-chemical characterization such as determination of membrane permeability of liposome, its size and charge, and encapsulation efficiency are included. Two different layouts using liposomes to yield more efficient separation of various analytes are also presented, capillary electrochromatography, and liposomal electrokinetic chromatography.

IAM Chromatographic Models of Skin Permeation

Chromatographic retention factor log k_IAM obtained from IAM HPLC chromatography with buffered aqueous mobile phases and calculated molecular descriptors (surface area—S_a; molar volume—V_M; polar surface area—PSA; count of freely rotable bonds—FRB; H-bond acceptor count—HA; energy of the highest occupied molecular orbital—E_HOMO; energy of the lowest unoccupied orbital—E_LUMO; and polarizability—α) obtained for a group of 160 structurally unrelated compounds were tested in order to generate useful models of solutes’ skin permeability coefficient log K_p. It was established that log k_IAM obtained in the conditions described in this study is not sufficient as a sole predictor of the skin permeability coefficient. Simple put, potentially useful models based on log k_IAM and readily available calculated descriptors, accounting for 85 to 91% of the total variability, were generated using Multiple Linear Regression (MLR).The models proposed in the study were tested on a group of 20 compounds with known experimental log K_p values.

Evaluating micellar liquid chromatographic methods on octadecyl particle-based and monolithic columns to predict the skin permeation of drug and cosmetic molecules

A micellar liquid chromatographic method was developed to assist in the modeling of the skin permeability of pharmaceutical and cosmetic compounds. The composition of the mobile phase was determined by means of a two-factor central composite design, after which it was tested on both a particle-based and monolithic column. The latter provided the opportunity to increase the flow rate from 1 to 8 mL/min without reaching too high backpressures. The micellar conditions allowed analyzing a large test set of compounds with diverse characteristics with just one mobile-phase composition. The obtained experimental chromatographic descriptors besides two sets of theoretical molecular descriptors were used to model the skin permeability coefficient log K_p, applying multiple linear regression and partial least squares regression approaches. The micellar method on the monolithic column provided useful models with similar or even slightly better performance parameters than the method on the particle-based column. Furthermore, a much faster analysis can be achieved when applying a flow rate of 8 mL/min, making the micellar monolithic method ideal to estimate skin permeability.

Determination of lipid-water partition coefficient of neutral and ionic drugs by liposome electrokinetic chromatography

Profiling of lipid-water partition coefficients (K_L/W ) of drugs is an essential issue during the early stage of drug development. In this study, two liposomes, including 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) + cholesterol (Chol) (DSPC/Chol liposomes) and soybean lecithin (SPC) + Chol (SPC/Chol liposomes), were prepared for the liposome electrokinetic chromatography (LEKC) analysis, and the logarithm of lipid-water partition coefficients (log K_L/W ) of neutral and ionic drugs were determined based on an iterative method. The log K_L/W values determined by the SPC/Chol or DSPC/Chol liposomes LEKC were linearly fitted, which showed a good fitting coefficient (R² = 0.89). Furthermore, the linear relationship between the data obtained from LEKC system and octanol-water system, immobilized artificial membrane, Caco-2 cell model, and software prediction was analyzed, respectively. Results illustrated that DSPC/Chol liposomes or SPC/Chol liposomes had a good linear relationship with Caco-2 cell model, and R² was 0.81 and 0.72, respectively. Moreover, the linear free energy relationship analysis suggested that the solute volume, hydrogen bond basicity, and J^- were the main descriptors that drove the partition process of solutes in the SPC/Chol or DSPC/Chol LEKC system. In addition, the normalized properties of the SPC/Chol and DSPC/Chol LEKC systems through linear free energy relationship analysis were very close. In short, DSPC/Chol liposomes are more suitable for simulating cell membranes than SPC/Chol liposomes, and the developed LEKC is an effective partitioning model for measuring the log K_L/W of drugs.

Application of RP-18 TLC Retention Data to the Prediction of the Transdermal Absorption of Drugs

Several chromatographic parameters (R_M⁰ and S obtained from RP-18 TLC with methanol—pH 7.4 phosphate buffer mobile phases by extrapolation to zero concentration of methanol; R_f and R_M obtained from RP-18 TLC with acetonitrile—pH 7.4 phosphate buffer 70:30 v/v as a mobile phase) and calculated molecular descriptors (molecular weight—M_W; molar volume—V_M; polar surface area—PSA; total count of nitrogen and oxygen atoms—(N+O); H-bond donor count—HD; H-bond acceptor count—HA; distribution coefficient—log D; total energy—E_T; binding energy—E_b; hydration energy—E_h; energy of the highest occupied molecular orbital—E_HOMO; energy of the lowest unoccupied orbital—E_LUMO; electronic energy—E_e; surface area—S_a; octanol-water partition coefficient—log P; dipole moment—DM; refractivity—R, polarizability—α) and their combinations (R_f/PSA, R_M/M_W, R_M/V_M) were tested in order to generate useful models of solutes’ skin permeability coefficient log K_p. It was established that neither R_M⁰ nor S obtained in the conditions used in this study is a good predictor of the skin permeability coefficient. The chromatographic parameters R_f and R_f/PSA were also unsuitable for this purpose. A simple and potentially useful, purely computational model based on (N+O), log D and HD as independent variables and accounting for ca. 83% of total variability was obtained. The evaluation of parameters derived from R_M (R_M, R_M/M_W, R_M/V_M) as independent variables in log K_p models proved that R_M/V_M is the most suitable descriptor belonging to this group. In a search for a reliable log K_p model based on this descriptor two possibilities were considered: a relatively simple model based on 5 independent variables: (N+O), log D, R_M/V_M, E_T and E_h and a more complex one, involving also E_b, M_W and PSA.

Application of separation methods for in vitro prediction of blood-brain barrier permeability-The state of the art

Despite many efforts, drug discovery pipeline is still a highly inefficient process. Nowadays, when combinatorial chemistry enables to synthesize hundreds of new drugs candidates, methods for rapid assessment of biopharmaceutical parameters of new compounds are highly desired. Over one-third of drugs candidates is rejected because of unsatisfactory pharmacokinetic properties. In the drug discovery process, the blood-brain barrier (BBB) permeability plays a critical role for central nervous system active drugs candidates as well as non-central nervous system active drugs. For this reason, knowledge on the BBB permeability of compounds is essential in the development of new medicines. The review was focused on the application of different separation methods for BBB permeability assessment. Both chromatographic and electrophoretic methods were described. In the article, the advantages and limitations of well-established chromatographic methods like immobilized artificial membrane chromatography or micellar liquid chromatography, and less common techniques were discussed. Special attention was devoted to methods were microemulsion is used as mobile or pseudostationary phases.

Phospholipid bilayer affinities and solvation characteristics by electrokinetic chromatography with a nanodisc pseudostationary phase

Phospholipid bilayer nanodiscs composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine and synthetic maleic acid-styrene copolymer belts have been introduced as a pseudostationary phase (PSP) in electrokinetic chromatography and demonstrated good performance. The nanodiscs provide a suitable migration range and high theoretical plate counts. Using this nanodisc pseudostationary phase, the affinity of the bilayer structure for probe solutes was determined and characterized. Good correlation is observed between retention factors and octanol water partition coefficients for particular categories of solutes, but the general correlation is weak primarily because the nanodiscs show stronger affinity than octanol for hydrogen bond donors. This suggests that a more appropriate application of this technology is to measure and characterize interactions between solutes and lipid bilayers directly. Linear solvation energy relationship analysis of the nanodisc-solute interactions in this study demonstrates that the nanodiscs provide a solvation environment with low cohesivity and weak hydrogen bond donating ability, and provide relatively strong hydrogen bond acceptor strength.

In vitro skin models as a tool in optimization of drug formulation

(Trans)dermal drug therapy is gaining increasing importance in the modern drug development. To fully utilize the potential of this route, it is important to optimize the delivery of active ingredient/drug into/through the skin. The optimal carrier/vehicle can enhance the desired outcome of the therapy therefore the optimization of skin formulations is often included in the early stages of the product development. A rational approach in designing and optimizing skin formulations requires well-defined skin models, able to identify and evaluate the intrinsic properties of the formulation. Most of the current optimization relies on the use of suitable ex vivo animal/human models. However, increasing restrictions in use and handling of animals and human skin stimulated the search for suitable artificial skin models. This review attempts to provide an unbiased overview of the most commonly used models, with emphasis on their limitations and advantages. The choice of the most applicable in vitro model for the particular purpose should be based on the interplay between the availability, easiness of the use, cost and the respective limitations.

Recent advances in capillary electrophoretic migration techniques for pharmaceutical analysis

Since the introduction about 30 years ago, CE techniques have gained a significant impact in pharmaceutical analysis. The present review covers recent advances and applications of CE for the analysis of pharmaceuticals. Both small molecules and biomolecules such as proteins are considered. The applications range from the determination of drug-related substances to the analysis of counterions and the determination of physicochemical parameters. Furthermore, general considerations of CE methods in pharmaceutical analysis are described.

Lipophilicity and its relationship with passive drug permeation

In this review, we first summarize the structure and properties of biological membranes and the routes of passive drug transfer through physiological barriers. Lipophilicity is then introduced in terms of the intermolecular interactions it encodes. Finally, lipophilicity indices from isotropic solvent systems and from anisotropic membrane-like systems are discussed for their capacity to predict passive drug permeation across biological membranes such as the intestinal epithelium, the blood-brain barrier (BBB) or the skin. The broad evidence presented here shows that beyond the predictive power of lipophilicity parameters, the various intermolecular forces they encode allow a mechanistic interpretation of passive drug permeation.