A fritless, EOF microchip pump for high pressure pumping of aqueous and organic solvents

Low-voltage efficient electroosmotic pumps with ultrathin silica nanoporous membrane

In this work, an efficient electroosmotic pump (EOP) based on the ultrathin silica nanoporous membrane (u-SNM), which can drive the motion of fluid under the operating voltage as low as 0.2 V, has been fabricated. Thanks to the ultrathin thickness of u-SNM (∼75 nm), the effective electric field strength across u-SNM could be as high as 8.27 × 10⁵ V m^-1 in 0.4 M KCl when 1.0 V of voltage was applied. The maximum normalized electroosmotic flow (EOF) rate was as high as 172.90 mL/min/cm² /V, which was larger than most of other nanoporous membrane based EOPs. In addition to the ultrathin thickness, the high porosity of this membrane (with a pore density of 4 × 10¹² cm^-2 , corresponding to a porosity of 16.7%) also contribute to such a high EOF rate. Moreover, the EOF rate was found to be proportional to both the applied voltage and the electrolyte concentration. Because of small electrokinetic radius of u-SNM arising from its ultrasmall pore size (ca. 2.3 nm in diameter), the EOF rate increased with increasing the electrolyte concentration and reached the maximum at a concentration of 0.4 M. This dependence was rationalized by the variations of both zeta potential and electrokinetic radius with the electrolyte concentration.

Advancement of electroosmotic pump in microflow analysis: A review

This review (with 152 references) covers the progress made in the development and application of electroosmotic pumps in a period from 2009 through 2018 in microflow analysis. Following a short introduction, the review first categorizes various electroosmotic pumps into five subclasses based on the materials used for pumping: i) open channel EOP, 2) packed-column EOP, iii) porous monolith EOP, iv) porous membrane EOP, and v) other types of EOP. Pumps in each subclass are discussed. A next section covers EOP applications, primarily the applications of EOPs in micro flow analysis and micro/nano liquid chromatography. Other scattered applications are also examined. Perspectives, trends and challenges are discussed in the final section.

NANO/MICROSCALE TECHNOLOGIES FOR DRUG DELIVERY

Nano- and microscale technologies have made a marked impact on the development of drug delivery systems. The loading efficiency and particle size of nano/micro particles can be better controlled with these new technologies than conventional methods. Moreover, drug delivery systems are moving from simple particles to smart particles and devices with programmable functions. These technologies are also contributing to in vitro and in vivo drug testing, which are important to evaluate drug delivery systems. For in vitro tests, lab-on-a-chip models are potentially useful as alternatives to animal models. For in vivo test, nano/micro-biosensors are developed for testing chemicals and biologics with high sensitivity and selectivity. Here, we review the recent development of nanoscale and microscale technologies in drug delivery including drug delivery systems, in vitro and in vivo tests.

A micro surface tension pump (MISPU) in a glass microchip

A non-membrane micro surface tension pump (MISPU) was fabricated on a glass microchip by one-step glass etching. It needs no material other than glass and is driven by digital gas pressure. The MISPU can be seen working like a piston pump inside the glass microchip under a microscope. The design of the valves (MISVA) and pistons (MISTON) was based on the surface tension theory of the micro surface tension alveolus (MISTA). The digital gas pressure controls the moving gas-liquid interface to open or close the input and output MISVAs to refill or drive the MISTON for pumping a liquid. Without any moving parts, a MISPU is a kind of long-lasting micro pump for micro chips that does not lose its water pumping efficiency over a 20-day period. The volumetric pump output varied from 0 to 10 nl s(-1) when the pump cycle time decreased from 5 min to 15 s. The pump head pressure was 1 kPa.

Lab on a chip packing of submicron particles for high performance EOF pumping

The packing of submicrometer sized silica beads inside a microchannel was enabled by a novel method which avoids the complication and limitations of generating a frit using conventional approaches and the restriction of flow using a submicrometer sized weir. A micrometer sized weir and two short columns of 5 μm and 800 nm silica beads packed in succession behind the weir together functioned as a high pressure frit to allow the construction of a primary packed bed of 390 nm silica beads. This packed bed microchannel was tested as an EOF pump, wherein it exhibited superior performance with regards to pressure tolerance, i.e., sustaining good flow rate under extremely high back pressure, and maximal pressure generation. Under a modest applied electric field strength of 150 V/cm, the flow rate against a back pressure of 1200 psi (∼8.3 MPa) was 40 nL/min, and the maximal pressure reached 1470 psi (∼10 MPa). This work has demonstrated that it is possible to create a high performance packed bed microchannel EOF pump using nanometer sized silica beads, as long as proper care is taken during the packing process to minimize the undesirable mixing of two different sized particles at the boundaries between particle segments and to maximize the packing density throughout the entire packed bed.