ERIC-PCR technique applied to monitoring and quantification of DNA damage during water disinfection process

In this work, we propose a novel application of ERIC-PCR technique to study DNA damage after ultraviolet radiation (UV) and peracetic acid (PAA) treatment for water disinfection purpose. The efficacy of both treatments on E. coli suspension was evaluated by two approaches: through monitoring of inactivation by conventional culture technique, and by analyzing DNA damage with ERIC-PCR. All the experiments were carried out in a batch reactor, using three intensities of UV-C radiation (10.5, 4.2 and 2.1 mW/cm2) and different PAA concentrations (4 to 16 ppm). Both treatments produced bacterial inactivation in a dose-response fashion. Based on the results of bacterial count we obtained an index of inactivation (INACI). For each sample, DNA extraction was performed and evaluated by ERIC-PCR. Qualitative modifications were observed in ERIC-PCR band patterns for all the UV-C radiation intensities used, but no changes were detected at any of the PAA concentrations. The banding pattern modifications observed are consequence of the interruption of Taq polymerase enzyme amplification-activity, caused by the presence of alterations on the DNA structure (dimer and hydrates formation). Furthermore, an index was proposed to measure DNA damage (DNADI) regarding the changes in the relative optical density values of the amplification products. A linear correlation was obtained with a high correspondence between the inactivation index (INACI) and the DNA damage index (DNADI), that was expressed as DNADI = 0.05881×INACI. This approach proves that ERIC-PCR is a feasible and valuable tool for detecting and quantifying DNA damage and it may provide a useful strategy for bacterial identification, tracking changes in DNA and providing reliable and reproducible data.

Bactericidal effects of deep ultraviolet light-emitting diode for solutions during intravenous infusion

Background: Ultraviolet irradiation is effectively used as a disinfection method for inactivating microorganisms. Methods: We investigated the bactericidal effects by irradiation with a deep-ultraviolet light-emitting diode (DUV-LED) on the causative microorganisms of catheter related blood stream infection contaminating the solution for intravenous infusion. For irradiation, prototype modules for water disinfection with a DUV-LED were used. Experiments were conducted on five kinds of microorganisms. We examined the dependence of bactericidal action on eleven solutions. Administration sets were carried out three types. Results: When the administration set JY-PB343L containing the infusion tube made of polybutadiene was used, the bactericidal action of the DUV-LED against all tested microorganisms in the physiological saline solutions was considered to be effective. We confirmed that the number of viable bacteria decreased in 5% glucose solution and electrolyte infusions with DUV-LED irradiation. Conclusions: These results indicate that the DUV-LED irradiation has bactericidal effects in glucose infusion and electrolyte infusions by irradiating via a plasticizer-free polybutadiene administration set. We consider DUV-LED irradiation to be clinically applicable.

Toxic cyanobacteria and drinking water: Impacts, detection, and treatment

Blooms of toxic cyanobacteria in water supply systems are a global issue affecting water supplies on every major continent except Antarctica. The occurrence of toxic cyanobacteria in freshwater is increasing in both frequency and distribution. The protection of water supplies has therefore become increasingly more challenging. To reduce the risk from toxic cyanobacterial blooms in drinking water, a multi-barrier approach is needed, consisting of prevention, source control, treatment optimization, and monitoring. In this paper, current research on some of the critical elements of this multi-barrier approach are reviewed and synthesized, with an emphasis on the effectiveness of water treatment technologies for removing cyanobacteria and related toxic compounds. This paper synthesizes and updates a number of previous review articles on various aspects of this multi-barrier approach in order to provide a holistic resource for researchers, water managers and engineers, as well as water treatment plant operators.

Arsenic removal from water employing a combined system: photooxidation and adsorption

A combined system employing photochemical oxidation (UV/H2O2) and adsorption for arsenic removal from water was designed and evaluated. In this work, a bench-scale photochemical annular reactor was developed being connected alternately to a pair of adsorption columns filled with titanium dioxide (TiO2) and granular ferric hydroxide (GFH). The experiences were performed by varying the relation of As concentration (As (III)/As (V) weight ratio) at constant hydrogen peroxide concentration and incident radiation. Experimental oxidation results were compared with theoretical predictions using an intrinsic kinetic model previously obtained. In addition, the effectiveness of the process was evaluated using a groundwater sample. The mathematical model of the entire system was developed. It could be used as an effective tool for the design and prediction of the behaviour of these types of systems. The combined technology is efficient and promising for arsenic removal to small and medium scale.

Emerging micropollutant oxidation during disinfection processes using UV-C, UV-C/H2O2, UV-A/TiO2 and UV-A/TiO2/H2O2

Regeneration of wastewater treatment plant effluents constitutes a solution to increase the availability of water resources in arid regions. Water reuse legislation imposes an exhaustive control of the microbiological quality of water in the operation of disinfection tertiary treatments. Additionally, recent reports have paid increasing attention to emerging micropollutants with potential biological effects even at trace level concentration. This work focuses on the evaluation of several photochemical technologies as disinfection processes with the aim of simultaneously achieving bacterial inactivation and oxidation of pharmaceuticals as examples of emerging micropollutants typically present in water and widely studied in the literature. UV-C-based processes show a high efficiency to inactivate bacteria. However, the bacterial damages are reversible and only when using H(2)O(2), bacterial reproduction is affected. Moreover, a complete elimination of pharmaceutical compounds was not achieved at the end of the inactivation process. In contrast, UV-A/TiO(2) required a longer irradiation time to inactivate bacteria but pharmaceuticals were completely removed along the process. In addition, its oxidation mechanism, based on hydroxyl radicals (OH), leads to irreversible bacterial damages, not requiring of chemicals to avoid bacterial regrowth. For UV-A/TiO(2)/H(2)O(2) process, the addition of H(2)O(2) improved Escherichia coli inactivation since the cell wall weakening, due to OH attacks, allowed H(2)O(2) to diffuse into the bacteria. However, a total elimination of the pharmaceuticals was not achieved during the inactivation process.

Evaluation of in vitro efficacy of combined riboflavin and ultraviolet a for Acanthamoeba isolates

PURPOSE

To evaluate in vitro the amoebicidal effects of riboflavin and ultraviolet A (UVA) collagen cross-linking.

DESIGN

Experimental study, laboratory investigation.

METHODS

Two different strains of Acanthamoeba species were tested identically. Four treatment groups were considered: group 1 consisted of 0.1% riboflavin and 30-minute UVA irradiation; group 2 consisted of 0.1% riboflavin and 60-minute UVA irradiation; group 3 consisted of no riboflavin and no UVA exposure; group 4 consisted of 0.1% riboflavin and no UVA exposure. The application of UVA was performed under the parameters used for in vivo corneal collagen cross-linking.

RESULTS

In all cases, cysts and trophozoites were detected 24 hours after treatment at a radial distance from the center of the seeding point more than 5 mm, indicating that the amoebae were viable. All treated and untreated groups of amoebae from the 2 strains exhibited growth (radii of 14 to 15 mm in groups 1, 3, and 4; radius of 12 mm in group 2). The final morphologic features of the 2 strains of trophozoites that received treatment were similar to those of the initial seeding group and the untreated control group.

CONCLUSIONS

The results obtained in our study show that a single dose (30 or 60 minutes) of cross-linking cannot achieve eradication in the 2 different Acanthamoeba strains examined. However, in vitro results do not always indicate in vivo efficacy, so future studies should test the validity of this treatment for Acanthamoeba keratitis.

Biofilm control in water by a UV-based advanced oxidation process

An ultraviolet (UV)-based advanced oxidation process (AOP), with hydrogen peroxide and medium-pressure (MP) UV light (H(2)O(2)/UV), was used as a pretreatment strategy for biofilm control in water. Suspended Pseudomonas aeruginosa cells were exposed to UV-based AOP treatment, and the adherent biofilm formed by the surviving cells was monitored. Control experiments using H(2)O(2) or MP UV irradiation alone could inhibit biofilm formation for only short periods of time (<24 h) post-treatment. In a H(2)O(2)/filtered-UV (>295 nm) system, an additive effect on biofilm control was shown vs filtered-UV irradiation alone, probably due to activity of the added hydroxyl radical (OH•). In a H(2)O(2)/full-UV (ie full UV spectrum, not filtered) system, this result was not obtained, possibly due to the germicidal UV photons overwhelming the AOP system. Generally, however, H(2)O(2)/UV prevented biofilm formation for longer periods (days) only when maintained with residual H(2)O(2). The ratio of surviving bacterial concentration post-treatment to residual H(2)O(2) concentration played an important role in biofilm prevention and bacterial regrowth. H(2)O(2) treatments alone resulted in poorer biofilm control compared to UV-based AOP treatments maintained with similar levels of residual H(2)O(2), indicating a possible advantage of AOP.

Dramatic enhancement of solar disinfection (SODIS) of wild Salmonella sp. in PET bottles by H2O2 addition on natural water of Burkina Faso containing dissolved iron

Disinfection of surface water containing dissolved iron (0.3 mg L(-1)) at natural neutral pH ( approximately 7.5) was carried out via solar disinfection (SODIS) treatment in PET bottles with H(2)O(2) (10 mg L(-1)). Wild coliforms and Salmonella sp. were monitored for 6 h of sunlight irradiation and 72 h of dark post-treatment period. In our conditions, SODIS treatment could not avoid Salmonella sp. re-growth during dark storage, meanwhile the addition of 10 mg L(-1) of H(2)O(2) showed a strong enhancement of the inactivation rate without any re-growth of both bacteria. Finally, total coliforms (Escherichia coli included) demonstrated to be an inappropriate indicator for monitoring bacterial contamination in water during solar disinfection processes.