Mixed-ligand, radical, gold bis(dithiolene) complexes: from single-component conductors to controllable NIR-II absorbers

Neutral radical bis(dithiolene) gold complexes [Au(dt)2]˙ are known to exhibit a strong absorption in the 1400-2000 nm NIR absorption range. Here, we demonstrate that the NIR signature of mixed-ligand bis(dithiolene) gold complexes [Au(dtA)(dtD)]˙ associating two different dithiolene, dtA and dtD, is found at higher energy, out of the range of the homoleptic analogs [Au(dtA)2]˙ and [Au(dtD)2]˙, in the looked-after NIR-II 1000-1400 nm absorption range. An efficient synthetic approach towards precursor mixed-ligand monoanionic gold bis(dithiolene) complexes [Au(dtA)(dtD)]-1 is reported. Using this strategy, no symmetrical complexes are formed and, upon electrocrystallization, no scrambling was observed in solution, allowing for the isolation of radical gold bis(dithiolene) complex such as [Au(bdt)(Et-thiazdt)]˙ (bdt: benzene-1,2-dithiolate; Et-thiazdt: N-ethyl-thiazoline-2-thione-3,4-dithiolate), which behaves as a single-component conductor. It is shown from theoretical calculations that the spin polarization induced by electron repulsions leads to a strong localization of the spin-orbitals, and provides a sound basis to understand, (i) the different ligand-based oxidation potentials, (ii) the NIR optical absorption at notably higher energies and (iii) the larger potential difference of the two redox processes than in the parent symmetric complexes. The solid-state properties of the radical complex [Au(bdt)(Et-thiazdt)]˙ are the consequence of a strongly 1D electronic structure with weakly dimerized chains and electronic localization favoring a semiconducting behavior, stable under pressures up to 18.2 GPa. Altogether, the versatility of the preparation method of [Au(dtA)(dtD)]-1 salts opens the route for a wide library of different mixed-ligand radical complexes [Au(dtA)(dtD)]˙ with simultaneously an adaptable absorption in the NIR-II range and the rich structural chemistry of single-component conductors.

Investigations of the Photothermal Properties of a Series of Molecular Gold-bis(dithiolene) Complexes Absorbing in the NIR-III Region

The photothermal properties of a series of neutral radical gold-bis(dithiolene) complexes absorbing in the near-infrared-III window (1550-1870 nm) have been investigated. This class of complexes was found to be good photothermal agents (PTAs) in toluene under 1600 nm laser irradiation with photothermal efficiencies around 40 and 60 % depending on the nature of the dithiolene ligand. To the best of our knowledge, these complexes are the first small molecular photothermal agents to absorb so far into the near infrared. To test their applicability in water, these hydrophobic complexes have been encapsulated into nanoparticles constituted by amphiphilic block-copolymers. Stable suspensions of polymeric nanoparticles (NPs) encapsulating the gold-bis(dithiolene) complexes have been prepared which show a diameter around 100 nm. The encapsulation rate was found to be strongly dependent on the nature of the dithiolene ligands. The photothermal properties of the aqueous suspensions containing gold-bis(dithiolene) complexes were then studied under 1600 nm laser irradiation. These studies demonstrate that water has strong photothermal activity in the NIR-III region that, cannot be overcome even with the addition of gold complexes displaying good photothermal properties.

Mixed-Valence Conductors from Ni Bis(diselenolene) Complexes with a Thiazoline Backbone

Highly conducting, mixed-valence, multi-component nickel bis(diselenolene) salts were obtained by electrocrystallization of the monoanionic species [Ni(Me-thiazds)₂]^-1 (Me-thiazds: N-methyl-1,3-thiazoline-2-thione-4,5-diselenolate), with 1:2 and 1:3 stoichiometries depending of the counter ion used (Et₄N⁺ and nBu₄N⁺ vs Ph₄P⁺, respectively). This behavior strongly differs from that of the corresponding monoanionic dithiolene complexes whose oxidation afforded the single component neutral species. This provides additional rare examples of mixed-valence conducting salts of nickel diselenolene complexes, only known in two examples with the dsit (1,3-dithiole-2-thione-4,5-diselenolate) and dsise (1,3-dithiole-2-selone-4,5-diselenolate) ligands. The mixed-valence salts form highly dimerized or trimerized bi- and trimetallic units, rarely seen with such nickel complexes. Transport measurements under a high pressure (up to 10 GPa) and band structure calculations confirm the semiconducting character of [Ph₄P][Ni(Me-thiazds)₂]₃ and the quasi metallic character of [Et₄N][Ni(Me-thiazds)₂]₂ and [NBu₄]_x[Ni(Me-thiazds)₂]₂ salts (0 < x < 1).

Bis[1,2-bis-(4-chloro-phen-yl)-ethyl-ene-1,2-dithiol-ato(1-)]nickel(II)

The title compound, [Ni(S2C2(C6H4-p-Cl)2)2] or [Ni(C14H8Cl2S2)2], crystallizes in the triclinic space group P as pairs of mol-ecules disposed about an inversion center at the bc face of the cell. Close inter-molecular C-H⋯S (2.884 Å) and C-H⋯Ni (3.032 Å) contacts that are less than the sum of the van der Waals radii appear to induce slight bowing of the mol-ecular planes toward one another. The angles at which the four p-ClC6H4- rings join the NiS2C2 chelate rings [39.37 (9)- 53.41 (6)°] are similarly influenced by these inter-molecular contacts. In the larger packing arrangement, sheets of mol-ecules extend in the direction of the ac face diagonal.

A radical mixed-ligand gold bis(dithiolene) complex

Asymmetry in the electronic structure of a mixed-ligand gold bis(dithiolene) complex explains its peculiar optical, electrochemical and structural features.

Electrochemical deposition of a semiconducting gold dithiolene complex with NIR absorption

Here, the synthesis of a new anionic gold dithiolene complex, NBu₄·[1-i], and that of its corresponding neutral gold complex 2 is reported. Complex 2 shows strong absorption into the IR, semiconductivity (σ_RT = 3.06 × 10^-7 S cm^-1) with an activation energy of 0.25 eV, and weakly temperature dependent paramagnetic susceptibility, indicating strong intermolecular interactions in the solid state. As a consequence of their strong intermolecular interactions, neutral gold dithiolene complexes are often highly insoluble, limiting their utility and processability. Electrochemical deposition is used to deposit conductive films of complex 2, which retain the NIR properties present in the bulk material, indicting that the strong intermolecular interactions are retained in the film.

A Mixed-Valence Tetra-Nuclear Nickel Dithiolene Complex: Synthesis, Crystal Structure, and the Lability of Its Nickel Sulfur Bonds

In this study, by employing a common synthetic protocol, an unusual and unexpected tetra-nuclear nickel dithiolene complex was obtained. The synthesis of the [Ni4(ecpdt)6]2− dianion (ecpdt = (Z)-3-ethoxy-3-oxo-1-phenylprop-1-ene-1,2-bis-thiolate) with two K+ as counter ions was then intentionally reproduced. The formation of this specific complex is attributed to the distinct dithiolene precursor used and the combination with the then coordinated counter ion in the molecular solid-state structure, as determined by X-ray diffraction. K2[Ni4(ecpdt)6] was further characterized by ESI-MS, FT-IR, UV-Vis, and cyclic voltammetry. The tetra-nuclear complex was found to have an uncommon geometry arising from the combination of four nickel centers and six dithiolene ligands. In the center of the arrangement, suspiciously long Ni–S distances were found, suggesting that the tetrameric structure can be easily split into two identical dimeric fragments or two distinct groups of monomeric fragments, for instance, upon dissolving. A proposed variable magnetism in the solid-state and in solution due to the postulated dissociation was confirmed. The Ni–S bonds of the “inner” and “outer” nickel centers differed concurrently with their coordination geometries. This observation also correlates with the fact that the complex bears two anionic charges requiring the four nickel centers to be present in two distinct oxidation states (2 × +2 and 2 × +3), i.e., to be hetero-valent. The different coordination geometries observed, together with the magnetic investigation, allowed the square planar “outer” geometry to be assigned to d8 centers, i.e., Ni2+, while the Ni3+ centers (d7) were in a square pyramidal geometry with longer Ni–S distances due to the increased number of donor atoms and interactions.

Design of a One-Dimensional Stacked Spin Peierls System with Room-Temperature Switching from Quantum Mechanical Predictions

Planar bis-1,2-dithiolene complex anions of a transition metal (denoted as [M(dithiolato)₂]^- and M = Ni, Pd, or Pt ion) favor forming columnar stacks of anions in the crystal that feature S = 1/2 spin-chains, and such a spin-chain compound often undergoes a spin-Peierls-type transition, making this a promising material for conducting and magnetic switching. However, current examples show the transition temperatures are far too low for most applications. We use quantum mechanics to predict that changing the cation arrangement from the boat-type to the chair-type packing configuration in a spin-Peierls-type [Ni(dithiolato)₂]^- complex will substantially stabilize the antiferromagnetic coupling, dramatically increasing the transition temperature. We estimate that the [Ni(mnt)₂]-based complexes (mnt = maleonitriledithiolate) with chair-type packing of cations will lead to critical temperatures of ∼170, ∼252, and ∼310 K for S-, Se-, and Te-based mnt, respectively. We also suggest how to stabilize the chair-type configurations of these systems.

Enabling single qubit addressability in a molecular semiconductor comprising gold-supported organic radicals

A bis(dithiolene)gold complex is presented as a model for an organic molecular electron spin qubit attached to a metallic surface that acts as a conduit to electrically address the qubit. A two-membered electron transfer series is developed of the formula [AuIII(adt)2]1-/0, where adt is a redox-active dithiolene ligand that is sequentially oxidized as the series is traversed while the central metal ion remains AuIII and steadfastly square planar. One-electron oxidation of diamagnetic [AuIII(adt)2]1- (1) produces an S = 1/2 charge-neutral complex, [AuIII(adt2 3-˙)] (2) which is spectroscopically and theoretically characterized with a near negligible Au contribution to the ground state. A phase memory time (T M) of 21 μs is recorded in 4 : 1 CS2/CCl4 at 10 K, which is the longest ever reported for a coordination complex possessing a third-row transition metal ion. With increasing temperature, T M dramatically decreases becoming unmeasurable above 80 K as a consequence of the diminishing spin-lattice (T 1) relaxation time fueled by spin-orbit coupling. These relaxation times are 1-2 orders of magnitude shorter for the solid dilution of 2 in isoelectronic [Ni(adt)2] because this material is a molecular semiconductor. Although the conducting properties of this material provide efficient pathways to dissipate the energy through the lattice, it can also be used to electrically address the paramagnetic dopant by tapping into the mild reduction potential to switch magnetism "on" and "off" in the gold complex without compromising the integrity of its structure. These results serve to highlight the need to consider all components of these spintronic assemblies.

Construction of dimetal-containing dithiolene and Schiff base conjugated polymer coating: exploiting metal coordination as a design strategy for improving infrared stealth properties

Dimetal-containing dithiolene and Schiff base conjugated polymer coatings are constructed and exhibit excellent stealth abilities in the NIR (near-infrared) and MFIR (mid–far-infrared) range.

Biocompatible nanoparticles containing hydrophobic nickel-bis(dithiolene) complexes for NIR-mediated doxorubicin release and photothermal therapy

Nickel-bis(dithiolene) containing NPs: controlled release of Dox and photothermal therapy under NIR Irradiation.

Construction of flexible and stable near-infrared absorbing polymer films containing nickel-bis(dithiolene) moieties via ligand-exchange post-polymerization modification

The expected combinational merits of polymeric materials and nickel-bis(dithiolene) complexes are successfully achieved by a ligand-exchange post-polymerization modification method.

Single-Component Conductors: A Sturdy Electronic Structure Generated by Bulky Substituents

While the introduction of large, bulky substituents such as tert-butyl, -SiMe3, or -Si(isopropyl)3 has been used recently to control the solid state structures and charge mobility of organic semiconductors, this crystal engineering strategy is usually avoided in molecular metals where a maximized overlap is sought. In order to investigate such steric effects in single component conductors, the ethyl group of the known [Au(Et-thiazdt)2] radical complex has been replaced by an isopropyl one to give a novel single component molecular conductor denoted [Au(iPr-thiazdt)2] (iPr-thiazdt: N-isopropyl-1,3-thiazoline-2-thione-4,5-dithiolate). It exhibits a very original stacked structure of crisscross molecules interacting laterally to give a truly three-dimensional network. This system is weakly conducting at ambient pressure (5 S·cm(-1)), and both transport and optical measurements evidence a slowly decreasing energy gap under applied pressure with a regime change around 1.5 GPa. In contrast with other conducting systems amenable to a metallic state under physical or chemical pressure, the Mott insulating state is stable here up to 4 GPa, a consequence of its peculiar electronic structure.

Chiral, radical, gold bis(dithiolene) complexes

Chiral gold(iii) dithiolene complexes are investigated for further oxidation to the neutral radical species, as potential single component conductors.

Molecular Alloys of Neutral Gold/Nickel Dithiolene Complexes in Single-Component Semiconductors

Control of band filling or doping of molecular (semi)conductors can be performed by substitutional insertion of molecules with a similar shape but a different electron count, with one more or one less electron. This strategy has been explored here within the semiconducting, single-component, radical gold dithiolene complex [AuOC4] bearing para-butoxyphenyl substituents. Alloying with the corresponding neutral nickel dithiolene complex [NiOC4] lacking one electron afforded a complete isostructural series [NiOC4]1-x[AuOC4]x, spanning the whole composition range from x = 0 to x = 1 by 0.1 increments, further characterized by X-ray diffraction and EDX analyses. Magnetic susceptibility data confirm the antiferromagnetic interactions between neighboring radical gold dithiolene complexes. The electrical conductivity increases exponentially with the x gold fraction, while the activation energy remains constant in the more conducting, gold-rich samples. This behavior is tentatively assigned to the tunneling barriers of variable width (with x) but of constant height, separating more conducting gold-rich segments. Comparison of redox potentials for the 1e(-) oxidation and reduction of both [NiOC4] and [AuOC4] dithiolene complexes indicates that the [NiOC4] nickel complex does not act as a dopant for the radical [AuOC4] complex.

Radical or not radical: compared structures of metal (M = Ni, Au) bis-dithiolene complexes with a thiazole backbone

A complete series of dianionic, monoanionic, and neutral dithiolene complexes formulated as [Ni(Et-thiazdt)2](n), with n = -2, -1, 0, and Et-thiazdt: N-ethyl-1,3-thiazoline-2-thione-4,5-dithiolate, is prepared using an optimized procedure described earlier for the N-Me derivatives. Electrochemical and spectroscopic properties confirm the electron-rich character of the Et-thiazdt dithiolate ligand. The three complexes are structurally characterized by single-crystal X-ray diffraction. The paramagnetic anionic complex [Ni(Et-thiazdt)2](-1), as Ph4P(+) salt, exhibits side-by-side lateral interactions leading to a Heisenberg spin chain behavior. The solid-state structure of the neutral, diamagnetic [Ni(Et-thiazdt)2](0) complex shows a face-to-face organization with a large longitudinal shift, at variance with the structure of its radical and neutral gold dithiolene analogue described earlier and formulated as [Au(Et-thiazdt)2](•). Comparison of the two structures, and those of the other few structurally characterized pairs of Ni/Au dithiolene complexes, demonstrates the important role played by overlap interactions between gold dithiolene radical species. Despite its closed-shell character, the neutral nickel complex [Ni(Et-thiazdt)2](0) exhibits a semiconducting behavior with a room-temperature conductivity σRT ≈ 0.014 S cm(-1).

Unexpected isotopic effect of a deuteriumed countercation on the spin-Peierls-type transitions in quasi-one-dimensional bis(maleonitriledithiolato)nickelate monoanion spin systems

Two deuteriumed quasi-one-dimensional (quasi-1D) spin-Peierls-type compounds, 4-X-benzylpyridinium-d(5) bis(maleo-nitriledithiolato)nickelate (the substituent X = Br or Cl), were structurally characterized. Compared with the corresponding non-deuteration compounds, the transition temperature T(C) shifts to higher temperature. The isotopic effect of countercations on T(C) is probably related to the change of phonon frequency ω(0) and 'chemical pressure' resulted from the substitution of pyridine by pyridine-d(5).