Reversible Perspiring Artificial "Fingertips"

Fingertip perspiration is a vital process within human predation, to which the species owes its survival and its biological success. In this paper, the unique human ability of extensive perspiration and controlled friction in self-assembled cholesteric liquid crystals is recreated, mimicking the natural processes that occur in the dermis and epidermis of human skin. This is achieved by inducing porosity in responsive, liquid-bearing material through the controlled-polymerization phase-separation process. The unique topography of human fingerprints is further emulated in the materials by balancing the parallel chirality-induced force and the perpendicular substrate-anchoring force during synthesis. As a result, artificial fingertips are capable of secreting and re-absorbing liquid upon light illumination. By demonstrating the function of the soft material in a tribological aspect, it exhibits a controllable anti-sliding property comparable to human fingertips and subsequently attains a higher degree of biomimicry. This biomimetic fingertip is envisioned being applied in a multitude of fields, ranging from biomedical instruments to interactive, human-like soft robotic devices.

Beyond Sol-Gel: Molecular Gels with Different Transitions

The existence of sol–gel transitions is one of the most manifest properties of molecular gels. These transitions reflect their nature since they correspond to the association or dissociation of low weight molecules through non-covalent interactions to form the network constitutive of the gel. Most described molecular gels undergo only one gel-to-sol transition upon heating, and the reverse sol-to-gel transition upon cooling. It has been long observed that different conditions of formation could lead to gels with different morphologies, and that gels can undergo a transition from gel to crystals. However, more recent publications report molecular gels which exhibit additional transitions, for instance gel-to-gel transitions. This review surveys the molecular gels for which, in addition to sol–gel transitions, transitions of different nature have been reported: gel-to-gel transitions, gel-to-crystal transition, liquid–liquid phase separations, eutectic transformations, and synereses.

Controlling Syneresis of Hydrogels Using Organic Salts

Supramolecular hydrogels can spontaneously undergo syneresis through fibre-fibre interactions and expel significant amounts of water upon aging. In this process, the hydrophobicity of fibres which regulates the 3D-rearrangement of the self-assembled structures during syneresis is important. Here, we show that we can control the hydrophobic microenvironment of gels by incorporating organic salts into the co-assembled gel fibres thereby enabling control of the macroscopic gel volume phase transition.

Controlling hydrogel properties by tuning non-covalent interactions in a charge complementary multicomponent system

Mixing small molecule gelators is a promising route to prepare useful and exciting materials that cannot be accessed from any of the individual components. Here, we describe pH-triggered hydrogelation by mixing of two non-gelling amphiphiles. The intermolecular interactions among the molecules can be tuned either by controlling the degree of ionization of the components or by a preparative pathway, which enables us to control material properties such as gel strength, gel stiffness, thermal stability, and an unusual shrinking/swelling behaviour.

Shear-induced slab-like domains in a directed percolated colloidal gel

We explore the structural changes of a gel-forming colloid polymer mixture under shear by employing Brownian dynamics simulations of a colloidal system with short-ranged attractive depletion interaction in a linear flow profile. While the structure of unpercolated systems changes only slightly under shearing, we discover the formation of slab-like clusters in sheared directed percolated gel networks that are confined between two walls. These gel-slabs are stable over a long time and seem to be related to the syneresis phenomena that can be observed in directed percolated colloidal gels. Only at large shear strength the slabs are destroyed and a homogeneous state with many unbounded particles can be observed. We also quantitatively analyze our results by determining void volumes.

On the syneresis of an OPV functionalised dipeptide hydrogel

We describe a new dipeptide hydrogel based on an oligophenylene vinylene core. After gelation, the initial network evolves, expelling solvent and resulting in syneresis. We describe this process and the effects in the bulk properties of the material.

Directed percolation identified as equilibrium pre-transition towards non-equilibrium arrested gel states

The macroscopic properties of gels arise from their slow dynamics and load-bearing network structure, which are exploited by nature and in numerous industrial products. However, a link between these structural and dynamical properties has remained elusive. Here we present confocal microscopy experiments and simulations of gel-forming colloid–polymer mixtures. They reveal that gel formation is preceded by continuous and directed percolation. Both transitions lead to system-spanning networks, but only directed percolation results in extremely slow dynamics, ageing and a shrinking of the gel that resembles synaeresis. Therefore, dynamical arrest in gels is found to be linked to a structural transition, namely directed percolation, which is quantitatively associated with the mean number of bonded neighbours. Directed percolation denotes a universality class of transitions. Our study hence connects gel formation to a well-developed theoretical framework, which now can be exploited to achieve a detailed understanding of arrested gels.

Gels exhibit very slow dynamics, for which a structural reason remains elusive. Here, Kohl et al. show the gel formation is accompanied by a succession of continuous and directed percolation, with only the latter found to lead to the arrested dynamics.

Tweaking of the supramolecular gelation properties of a dipeptide based ambidextrous organogelator through the cooperative influence of hydrophobicity, steric bulk and conformational flexibility of the side chain residue of a single hydrophobic α-amino acid encrypted on a designed molecular frame

Fine tuning of gelation behavior via singular alteration of hydrophobic C_α-amino acid on the backbone of a dipeptide based ambidextrous organogelator.

Syneresis and delayed detachment in agar plates

Biogels made of crosslinked polymers such as proteins or polysaccharides behave as porous soft solids and store large amounts of solvent. These gels undergo spontaneous aging, called syneresis, which consists of the shrinkage of the gel matrix and the progressive expulsion of solvent. As a result, a biogel originally casted in a container often loses contact with the container sidewalls, and the detachment time is difficult to anticipate a priori, since it may occur over variable time spans (from hours to days). Here we report on syneresis phenomena in agar plates, which consist of Petri dishes filled with a gel mainly composed of agar. Direct observations and speckle pattern correlation analysis allow us to rationalize the delayed detachment of the gel from the sidewall of the Petri dish. The detachment time t* is surprisingly not controlled by the mass loss as one would intuitively expect. Instead, t* is strongly correlated to the gel minimum thickness emin measured along the sidewall of the plate, and increases as a robust function of emin, independently of the prior mass-loss history. Time-resolved correlation spectroscopy atypically applied to such weakly diffusive media gives access to the local thinning rate of the gel. This technique also allows us to detect the gel micro-displacements that are triggered by water evaporation prior to the detachment, and even to anticipate the latter from a few hours. Our work provides observables to predict the detachment time of agar gels in dishes, and highlights the relevance of speckle pattern correlation analysis for the quantitative investigation of the syneresis dynamics in biopolymer gels.

A systematic understanding of gelation self-assembly: solvophobically assisted supramolecular gelation via conformational reorientation across amide functionality on a hydrophobically modulated dipeptide based ambidextrous gelator, N-n-acyl-(l)Val-X(OBn), (X = 1,ω-amino acid)

Gelator backbone conformational flexibility plays an important role in a supramolecular self-assembly which is synergistically assisted by solvophobic interaction leading to a gelation of three sets of hydrophobically modulated dipeptidic gelators.

Anion-activated, thermoreversible gelation system for the capture, release, and visual monitoring of CO2

Carbon dioxide (CO2) is an important green house gas. This is providing an incentive to develop new strategies to detect and capture CO2. Achieving both functions within a single molecular system represents an unmet challenge in terms of molecular design and could translate into enhanced ease of use. Here, we report an anion-activated chemosensor system, NAP-chol 1, that permits dissolved CO2 to be detected in organic media via simple color changes or through ratiometric differences in fluorescence intensity. NAP-chol 1 also acts as a super gelator for DMSO. The resulting gel is transformed into a homogeneous solution upon exposure to fluoride anions. Bubbling with CO2 regenerates the gel. Subsequent flushing with N2 or heating serves to release the CO2 and reform the sol form. This series of transformations is reversible and can be followed by easy-to-discern color changes. Thus, NAP-chol 1 allows for the capture and release of CO2 gas while acting as a three mode sensing system. In particular, it permits CO2 to be detected through reversible sol-gel transitions, simple changes in color, or ratiometric monitoring of the differences in the fluorescence features.

New triangular steroid-based A(LS)3 type gelators for selective fluoride sensing application

A new series of triangular steroid-based A(LS)₃ type gelators has been developed which exhibited selective fluoride sensing abilities. The gelation, self-assembly and anion sensing properties of these gelators could be controlled by systematically altering their molecular structures.

Self-Assembly and Nanostructures in Organogels Based on a Bolaform Cholesteryl Imide Compound with Conjugated Aromatic Spacer

The self-assembly of small functional molecules into supramolecular structures is a powerful approach toward the development of new nanoscale materials and devices. As a class of self-assembled materials, low weight molecular organic gelators, organized in special nanoarchitectures through specific non-covalent interactions, has become one of the hot topics in soft matter research due to their scientific values and many potential applications. Here, a bolaform cholesteryl imide compound with conjugated aromatic spacer was designed and synthesized. The gelation behaviors in 23 solvents were investigated as efficient low-molecular-mass organic gelator. The experimental results indicated that the morphologies and assembly modes of as-formed organogels can be regulated by changing the kinds of organic solvents. Scanning electron microscopy and atomic force microscopy observations revealed that the gelator molecule self-assemble into different aggregates, from wrinkle and belt to fiber with the change of solvents. Spectral studies indicated that there existed different H-bond formations between imide groups and assembly modes. Finally, some rational assembly modes in organogels were proposed and discussed. The present work may give some insight to the design and character of new organogelators and soft materials with special structures.

Spacer effect on nanostructures and self-assembly in organogels via some bolaform cholesteryl imide derivatives with different spacers

In this paper, new bolaform cholesteryl imide derivatives with different spacers were designed and synthesized. Their gelation behaviors in 23 solvents were investigated, and some of them were found to be low molecular mass organic gelators. The experimental results indicated that these as-formed organogels can be regulated by changing the flexible/rigid segments in spacers and organic solvents. Suitable combination of flexible/rigid segments in molecular spacers in the present cholesteryl gelators is favorable for the gelation of organic solvents. Scanning electron microscopy and atomic force microscopy observations revealed that the gelator molecules self-assemble into different aggregates, from wrinkle and belt to fiber with the change of spacers and solvents. Spectral studies indicated that there existed different H-bond formations between imide groups and assembly modes, depending on the substituent spacers in molecular skeletons. The present work may give some insight into the design and character of new organogelators and soft materials with special molecular structures.

Molecular hydrogelators of peptoid-peptide conjugates with superior stability against enzyme digestion

We report on molecular hydrogelators based on peptoid-peptide conjugates with good biocompatibility to different cells and superior stability against proteinase K digestion.

Fluorescence and morphology modulation in a photochromic diarylethene self-assembly system

Switchable supramolecular self-assemblies on the basis of interaction between melamine group containing photochromic diarylethene unit (DTE) and naphthalimide derivate (1) were designed and fabricated. 1 can gelate several aprotic solvents with different morphologies. The gel turned into partial gel in ethyl acetate with the addition of DTE as a guest molecule. Both the absorption and fluorescence spectra of the assembly can be reversibly switched by alternating UV/visible light irradiation. Meanwhile, the morphology of the coassembly of 1(2)·DTE changed to film from original pieces of gel 1 in ethyl acetate. When 1(2)·DTE was irradiated by UV light, the film morphology was converted into aggregated flakes. Moreover, the surface wettability of the complex can also be switched by light irradiation. The photochromic diarylethene unit is able to modulate the fluorescence and morphology of the assembled system only by virtue of light irradiation. Therefore, these results provide further insights into fluorescence and morphology controlling, especially application in upscale smart responsive materials.

Functional IrIII complexes and their applications

Iridium complexes are drawing great interest because they exhibit high phosphorescence quantum efficiency. Extensive efforts have been devoted to the molecular design of ligands to achieve phosphorescent emission over a wide range of wavelengths that is compatible with many applications. In this research news article, we focus on materials design to improve the performance of phosphorescent Ir(III) complexes for organic light-emitting diodes (OLEDs), luminescence sensitizers, and biological imaging.