Recognition and sensing of fluoride anion

Periodic Trends in Intra-ionic Excited State Quenching by Halide

The preassociation of reactants in a photoinitiated redox reaction through the use of noncovalent interactions can have a significant impact on excited state reactivity. As these noncovalent interactions render some stabilization to the associated species, they impact the kinetics and thermodynamics of photoinitiated electron transfer. Reported herein is a novel iridium(III) photocatalyst, equipped with an anion-sensitive, amide-substituted bipyridine ligand, and its reactivity with the halides (X = I-, Br-, Cl-) in acetonitrile and dichloromethane. A noteworthy periodic trend was observed, where the size and electron affinity dramatically altered the observed photoredox behavior. The binding affinity for the halides increased with decreasing ionic radius (Keq ∼103 to >106) in a polar medium but association was stoichiometric for each halide in a nonpolar medium. Evidence for the static quenching of iodide and bromide is presented while dynamic quenching was observed with all halides. These results highlight how the photophysics of halide adducts and the thermodynamics of intra-ionic photo-oxidation are impacted as a consequence of preassociation of a quencher through hydrogen bonding.

Novel Discrete and Imprinted Fluoride-Selective Sensors: Bridging the Gap from DMSO to Aqueous Samples

Fluoride in drinking water has beneficial or harmful health effects depending on its concentration. This highlights the need for new low-cost and portable sensors capable of in situ monitoring of F- ions. Unfortunately, achieving high levels of water compatibility and fluoride specificity remains a challenge. Here, four new urea-based discrete sensors are prepared and characterized. The sensors containing anthracenyl- (5) and 9H-fluorenyl- (7) signaling units exhibit intense luminescent emissions in dimethyl sulfoxide, the former being particularly sensitive and selective to fluoride. In water, 5 displays a superior sensitivity (871 M-1) and a detection limit (8 µm) below international guidelines, albeit with cross-sensitivity to H2PO4‾. To enhance the performance, 5 and 7 are embedded into a fluoride-imprinted polymeric matrix to give solid-state sensors (5P and 7P, respectively). 5P shows good sensitivity (360 M-1) and specificity in water. Besides, it has a low detection limit (35 µm) and a response linear range (118-6300 µm) encompassing the limit established by the Environmental Protection Agency (211 µm). Furthermore, 5P also displays good reusability and adequate recovery values in real-sample testing (102 ± 2%), constituting the first example of a low-cost anion-imprinted polymeric probe tailored for the selective sensing of fluoride in aqueous samples.

In Situ Ni(II) Complexation Induced Deprotonation of Bis-Thiourea-Based Tweezers in DMSO-Water Medium: An Approach toward Recognition of Fluoride Ions in Water with Organic Probe Molecules

Recognition of fluoride in water through the fluoride-induced Brönsted acid-base deprotonation reaction of an organic probe molecule is still a challenging task owing to the lower basicity of fluoride ions and the instability of the conjugate base of the probe molecules in aqueous medium. Herein, we report a complementary strategy in which the conjugate base of the studied bis-thiourea molecule in dimethyl sulfoxide (DMSO) medium is simultaneously stabilized through chelation of the Ni(II) ion, which eventually facilitates the recognition of the fluoride ion in water samples. The recognition methodology is validated colorimetrically and electrochemically, and finally, the applicability of the approach is explored with water samples collected from fluoride-affected areas. The limit of detection value for the fluoride ion in water medium was found to be 0.2 and 0.3 ppm with UV-visible spectroscopy and differential pulse voltammetry measurements, respectively. The methodology is also demonstrated on a paper strip for the detection of the fluoride ion with the naked eye and a smartphone-based RGB sensor. The scheme has been shown to be effective in enhancing the aqueous fluoride recognition ability of the organic probe molecules with acidic hydrogen prone to deprotonation by the fluoride ion.

A Reversible Fluorescent Chemosensor for the Selective Detection of Cu2+ and CN- ions by Displacement Approach

A novel fluorescence chemosensor BDP (2-(1-(benzothiazol-2-yl)-5-(4-(diphenylamino)phenyl)-4,5-dihydro-1H-pyrazol-3-yl)phenol) has been synthesized and its sensing behavior has been screened towards various cations by absorption, emission and mass spectroscopic techniques. The probe BDP detects Cu2+ ions preferentially over other metal ions, and the resulting BDP-Cu2+ ensemble acts as a secondary sensor for cyanide anion detection over other anions. The fluorescence intensity of the probe BDP is quenched when it comes into contact with Cu2+ ions, but it is increased reversibly when it comes into contact with cyanide anion, according to spectroscopic measurements. Along with this, optical studies indicate that the sensor BDP has capability to sense Cu2+ and CN- ions selectively over other examined competitive ions with the LOD of 2.57×10-8 M and 2.98×10-8 M respectively. The detection limit of Cu2+ ions is lower than the WHO recommended Cu2+ ions concentration (31.5 µM) in drinking water. On the basis of "on-off-on" fluorescence change of the probe BDP upon interaction with Cu2+ and CN- ions, a possible mechanism for this selective sensing behavior was presented and IMPLICATION logic gate was successfully designed. Furthermore, cell imaging investigations were used to investigate the probe BDP's biological applicability.

A novel ratiometric fluorescence probe based on the FRET-ICT mechanism for detecting fluoride ions and viscosity

Fluoride ion is not only important for dental health, but also a contributing factor in a variety of diseases. At the same time, fluoride ions and cell viscosity are both important to the physiological environment of mitochondria. We developed a dual-response ratiometric fluorescent probe BDF based on Förster resonance energy transfer (FRET) and intramolecular charge transfer (ICT) mechanism for the detection of F- and viscosity. BDF has an outstanding intramolecular energy transfer efficiency of 97.7% and shows excellent performance for fluorine ion detection. In addition, when the system viscosity increases, the fluorescence emission intensity of BDF is greatly heightened, indicating the possibility of viscosity detection. Finally, based on the fluorescence properties of BDF, we used the probe to detect F- in the toothpaste sample and image exogenous fluoride ions in HeLa cells.

Design of molecular sensors and switches based on luminescent ruthenium-terpyridine complexes bearing active methylene and triphenylphosphonium motifs as anion recognition sites: experimental and DFT/TD-DFT investigation

Synthesis, characterization and thorough investigation of the photophysical and electrochemical properties of a new category of emissive homo- and heteroleptic Ru(II)-complexes derived from the [4'-(p-triphenylphosphonium methyl phenyl)-2,2':6',2''-terpyridine]bromide (tpy-PhCH2PPh3Br) ligand have been executed in this work. Incorporation of the PhCH2PPh3+Br- group at the terpyridine motif appropriately adjusts the triplet metal-to-ligand charge transfer (3MLCT) and metal-centered (3MC) excited states so that the complexes luminesce at room temperature (RT) having lifetimes within the range of 6.82-9.63 ns. The RT emission characteristics of the complexes get further enhanced via aggregation phenomena through the use of different solvent/non-solvent mixtures (DMSO/H2O and DMSO/PhCH3 mixtures). Temperature dependent emission spectral measurements indicate that the emission intensity, quantum yield and lifetime increase upon dropping down the temperature, thereby designated as the on-state, while the increase of temperature causes a reduction of the said properties, indicating the off-state and the process is fully reversible. Taking advantage of the active methylene group coupled with a phosphonium motif, anion sensing characteristics of the complexes are investigated systematically in DMSO through the use of various optical channels and spectroscopic tools. The complexes are very much sensitive to fluoride and to a lesser extent acetate and dihydrogen phosphate among the studied anions. In essence, the complexes function as sensors for temperature and fluoride ion. Computational investigations were also executed via density functional theory (DFT) and time-dependent (TD)-DFT to obtain a clear understanding of the electronic structures of the metalloreceptors, appropriate assignment of the spectral bands and their mode of interaction with selected anions.

Diphenylpyrrole-Strapped Calix[4]pyrrole Extractant for the Fluoride and Chloride Anions

The anion binding features of diphenylpyrrole-strapped calix[4]pyrrole 1 have been investigated by means of 1 H NMR spectroscopy and ITC (isothermal titration calorimetry), as well as single crystal X-ray diffraction analyses. Receptor 1 bearing an auxiliary pyrrolic NH donor and solubilizing phenyl groups on the strap was found to bind F- , Cl- , and Br- as their tetrabutylammonium salts with high affinity in DMSO-d6 . In addition, receptor 1 was found to extract the fluoride anion (as both its tetraethylammonium (TEA+ ) and tetrabutylammonium (TBA+ ) salts), as well as the chloride anion into chloroform-d from an aqueous source phase. Cation metathesis using TBAI or the use of a dual host approach involving crown ethers enabled receptor 1 to extract simple alkali metal fluoride or chloride salts from water. Quantitative binding of NaF by receptor 1 was observed in 20 % D2 O-DMSO-d6 allowing for the direct determination of the NaF concentration in an unknown sample.

Neutral MOF Anion Receptor: Radical-Promoted Precise Anion Recognition

Precise ion recognition plays a key role in the anionic decontamination in water. However, the established anionic recognition based on neutral or cationic anion receptor is still restricted by the inherent limitation, such as narrow application scope in organic solvent rather than water for neutral anion receptor and poor selectivity due to non-directional electrostatic interaction for cationic anion receptor. Herein, for the first time, a neutral metal-organic framework (MOF) anion receptor is shown, enabling precise anion recognition, for example, the presence of a variety of 1000-fold competitive anions does not affect the selective adsorption of the target anion at all. A radical-dominating anion-recognition mechanism is proposed for rationalizing the efficacy of the neutral MOF.

Infrared Ion Spectroscopic Characterization of the Gaseous [Co(15-crown-5)(H2O)]2+ Complex

We report fingerprint infrared multiple-photon dissociation spectra of the gaseous monohydrated coordination complex of cobalt(II) and the macrocycle 1,4,7,10,13-pentaoxacyclopentadecane (or 15-crown-5), [Co(15-crown-5)(H2O)]2+. The metal-ligand complexes are generated using electrospray ionization, and their IR action spectra are recorded in a quadrupole ion trap mass spectrometer using the free-electron laser FELIX. The electronic structure and chelation motif are derived from spectral comparison with computed vibrational spectra obtained at the density functional theory level. We focus here on the gas-phase structure, addressing the question of doublet versus quartet spin multiplicity and the chelation geometry. We conclude that the gas-phase complex adopts a quartet spin state, excluding contributions of doublet species, and that the chelation geometry is pseudo-octahedral with the six oxygen centers of 15-crown-5 and H2O coordinated to the metal ion. We also address the possible presence of higher-energy conformers based on the IR spectral evidence and calculated thermodynamics.

Ratiometric colorimetric detection of fluoride ions using a schiff base sensor: enhancing selectivity and sensitivity for naked-eye analysis

A Schiff base receptor with an active -NH group was designed and synthesized for the selective and sensitive colorimetric detection of inorganic fluoride (F^-) ions in an aqueous medium. The sensitivity of the receptor for F^- ions was enhanced by the influence of two electron-withdrawing -NO₂ groups at ortho and para positions which result in a vivid color change. The receptor underwent a remarkable color change from light yellow to violet, enabling naked-eye detection of F^- ions without the need for spectroscopic equipment. To ensure the structural integrity of the synthesized receptors, prominent spectroscopic techniques such as ¹H NMR, FTIR, and GCMS analysis were used for characterization. With a limit of detection (LoD) of 0.0996 ppm, a 1 : 2 stoichiometric binding ratio was observed for receptor and F^- ions. The binding mechanism confirmed the deprotonation of the -NH group followed by the formation of -HF₂, resulting in an intramolecular charge transfer (ICT) transition, which correlates with UV-vis and ¹H NMR titration results. In addition, the proposed binding mechanism of F^- ion interaction with the receptor was theoretically validated using DFT and TDDFT calculations. Furthermore, as a real-life implementation of the receptor, quantification of the F^- ions present in a commercially available mouthwash was demonstrated. To assess the sensitivity performance, a paper-based dip sensor and a solid substrate sensor by functionalizing the receptor on diatomaceous earth were demonstrated. Finally, sensors were built into smartphones that could recognize the red, green, and blue percentages (RGB%) where each parameter defines the intensity of the color, which could also be used as a supplement to the colorimetric investigations.

Design, Synthesis, and Density Functional Theory Studies of Indole Hydrazones as Colorimetric "Naked Eye" Sensors for F Ions

A new series of sensors SM-1 to SM-3 was designed and synthesized using indole carboxaldehydes (2a-2c) and 2,4-dinitrophenyl hydrazine. Accompanied by the synthesis, density functional theory investigation was also accomplished at the M06-2X/6-311G+(d,p) functional. A reduction in band gap (ΔE = 4.702-4.230 eV) along with a bathochromic shift (λ_max = 433.223-471.584 nm) was seen in deprotonated chromophores than their neutral sensors. Further, significant charge transference from indole toward dinitrophenyl hydrazine was also examined. Global reactivity parameters also expressed the greater stability of sensors than that of their deprotonated form. SM-3 displayed high selectivity toward F ions as compared to SM-1 and SM-2, which respond to both F^- and CN^- ions. The electronic absorption spectrum was recorded in CH₃CN. The sensor SM-3 showed high selectivity toward F^- ions with a low detection limit (8.69 × 10^-8), and the binding constant for SM-3 was determined as 7.7 × 10⁵. The sensor displayed naked eye views as the color of solution changed from mustard to purple with a red shift of 96 nm. The mechanism suggests deprotonation from the NH group, which was confirmed by ¹H NMR. The sensor is found to be useful for detection of F^- ions in the real sample and for analytical application (test strip).

Facial vs. meridional coordination in gaseous Ni(II)-hexacyclen complexes revealed with infrared ion spectroscopy

We report fingerprint infrared multiple-photon dissociation (IRMPD) spectra of the isolated gaseous hexa-coordinated complex of the macrocycle hexa-aza-18-crown-6 (hexacyclen, 1,4,7,10,13,16-hexaazacyclooctadecane, 18-azacrown-6) with Ni2+. The metal-ligand complexes are generated using electrospray ionization (ESI) and IR action spectra are recorded in a Fourier transform ion cyclotron resonance mass spectrometer (FTICR) MS coupled to the infrared free-electron laser FELIX. We investigate geometric structure of the complexes and in particular the chelation motif, by comparison with computed vibrational spectra, obtained using density functional theory (DFT) at the B3LYP/6-31++G(d,p) level. The quasi-octahedral chelation motif of the complex has been well documented in condensed-phase studies, and we focus here on the gas-phase structure, addressing in particular the question of a facial (fac) versus a meridional (mer) octahedral chelation geometry. Based on the good agreement between calculated linear IR spectra and experimental IRMPD spectra, we conclude that the gas-phase complex adopts a mer chelation geometry and we exclude significant contribution of the fac isomer, which is computed to lie about 10 kJ mol-1 higher in energy. We also address the possible presence of both meridional diastereomers and of higher energy conformers of meridional isomers. Finally, as expected for the d8 Ni2+-ion in an octahedral ligand environment, the IR spectrum also shows that the complexes are in a high-spin electron configuration.

Rhenium(I)-Based Neutral Coordination Cages with a Spherical Cavity for Selective Recognition of Fluoride

Neutral heteroleptic trinuclear coordination cages containing a preorganized well-defined small spherical endocavity, which is made up of electron-deficient bowl frameworks, three coordination-induced neutral polar C-H donors, and a phenyl motif, were self-assembled via a one-pot approach; the endocavity accommodates fluoride selectively in the presence of other halides.

Perylenemonoimide-Based Colorimetric Probe with High Contrast for Naked-Eye Detection of Fluoride Ions

Excessive fluoride ions (F^-) in drinking water are harmful to the environment and human health. However, most reported probes of F^- can only detect fluorocarbons rather than aqueous F^-. Herein, a colorimetric and fluorescent probe (PMI-OH) based on perylenemonoimide is designed and synthesized for the detection of aqueous F^-, with high sensitivity, good selectivity, and reversibility. The F^- causes deprotonation of PMI-OH, leading to a significant red shift of 222 nm (from 520 to 742 nm) of the absorption band. Upon the addition of fluorocarbons, the fluorescence intensities of PMI-OH show good linearity against the concentrations of F^-, realizing the quantitative detection of fluorocarbons with a limit of detection as low as 0.495 μM. Finally, PMI-OH is applied to detect F^- in drinking water. The color of PMI-OH solution shows remarkable response from pink to green when the concentrations of F^- exceed the upper limit set by the World Health Organization (WHO), realizing rapid and naked-eye detection of aqueous F^-.

Highly regenerative, fast colorimetric response for organo-toxin and oxo-anions in an aqueous medium using a discrete luminescent Cd(II) complex in a heterogeneous manner with theoretical revelation

The highly luminescent complex [CdQ₂(H₂O)₂] (1) shows ultra-selectivity and high sensitivity to the explosive organo-toxin trinitrophenol (TNP). This detection is extremely fast with a high quenching constant (5.3 × 10⁴ M^-1) and a very low limit of detection (LOD) of 137 nM/59 ppb. This motivated us to detect the lethal carcinogenic arsenical drug roxarsone (ROX), which is reported here for the first time. The quenching constant and LOD for ROX using 1 were found to be 4.9 × 10⁴ M^-1 and 86 nM (or 37 ppb), respectively. Moreover, the probe also recognizes three lethal toxic oxo-anions (MnO₄^-, Cr₂O₇^2- and CrO₄^2-) with outstanding quenching constant (2.2 × 10⁴ M^-1, 1.4 × 10⁴ M^-1 and 1.1 × 10⁴ M^-1) and very low LODs (141 nM/61 ppb, 178 nM/78 ppb and 219 nM/95 ppb). Compared to the previously reported homogeneous sensing nature of the discrete complexes, our complex showed the detection of toxic pollutants in a heterogeneous manner, which results in high recyclability and hence multi-cycle sensing capability. Interestingly, 1 shows the possibility for real-time monitoring through naked eye detection by visible colorimetric changes in solid, solution and strip paper methods, i.e., triphasic detection ability. In addition, the sensor also exhibited the cross-sensing ability for these pollutants. The experimental sensing mechanism is strongly supported by the exhaustive theoretical investigation. Based on the fluorescence signal shown by each analyte, an integrated AND-OR logic gate is constructed. Furthermore, the sensing ability of 1 remains intact towards the detection of versatile real field samples including lethal carcinogenic arsenical drug roxarsone in the real food sample.

Fluorescence Sensors Based on Hydroxycarbazole for the Determination of Neurodegeneration-Related Halide Anions

The environmental presence of anions of natural origin or anthropogenic origin is gradually increasing. As a tool to tackle this problem, carbazole derivatives are an attractive gateway to the development of luminescent chemosensors. Considering the different mechanisms proposed for anion recognition, the fluorescence properties and anion-binding response of several newly synthesised carbazole derivatives were studied. Potential anion sensors were designed so that they combined the native fluorescence of carbazole with the presence of hydrogen bonding donor groups in critical positions for anion recognition. These compounds were synthesised by a feasible and non-expensive procedure using palladium-promoted cyclodehydrogenation of suitable diarylamine under microwave irradiation. In comparison to the other carbazole derivatives studied, 1-hydroxycarbazole proved to be useful as a fluorescent sensor for anions, as it was able to sensitively recognise fluoride and chloride anions by establishing hydrogen bond interactions through the hydrogen atoms on the pyrrolic nitrogen and the hydroxy group. Solvent effects and excited-state proton transfer (ESPT) of the carbazole derivatives are described to discard the role of the anions as Brönsted bases on the observed fluorescence behaviour of the sensors. The anion-sensor interaction was confirmed by 1H-NMR. Molecular modelling was employed to propose a mode of recognition of the sensor in terms of complex stability and interatomic distances. 1-hydroxycarbazole was employed for the quantitation of fluoride and chloride anions in commercially available medicinal spring water and mouthwash samples.

The sensing mechanism of a flavone-based ESIPT fluorescent chemodosimeter for selective recognition towards fluoride: a theoretical

The sensing mechanism of 3-hydroxyflavone-based (3-HF) fluorescent chemodosimeter 3-triisopropylsilylflavone (3-TPSF) for detecting fluoride (F-) has been theoretically investigated. The calculated Laplacian bond order confirms that the Si-O bond of 3-TPSF is the reaction site of F-. The free energy barrier of 18.33 kcal mol-1 indicates that F-triggered desilylation reaction can occur and then form the anionic state of 3-HF (3-HF-) with a fluorescence peak at 545 nm. 3-HF- captures H+ of the mixed aqueous medium to be transformed into 3-HF with an intramolecular hydrogen bond (O1-H⋯O2). The energy barrier of 1.86 kcal mol-1 in the S1 state obtained from the constructed potential energy curves confirms that the excited state intramolecular proton transfer (ESIPT) in 3-HF occurs to form a tautomer structure, which produces a long-wavelength emission of 549 nm. The fluorescence emitted from both 3-HF- and 3-HF agrees with the experimental value of 530 nm appearing after adding F-. Charge transfer analyses indicate that the extent of intramolecular charge transfer in 3-HF- is more intense than that of 3-TPSF, which induces a large Stokes shift of 180 nm. Therefore, the sensing mechanism is attributed to the combination of a large charge transfer feature and ESIPT that are caused by desilylation reaction. The significant fluorescence change makes 3-TPSF a chemodosimeter for detecting F-.

Colorimetric and fluorimetric detection of fluoride ion using thiazole derived receptor

Thiazole based receptor 3, was designed and synthesized by condensation reactionof5-chlorosalicylaldehyde with 4-(4-phenylthiazol-2-yl)semicarbazide for colorimetric and fluorimetric detection of fluoride ion. Receptor 3 was characterized by ¹H NMR, ¹³C NMR, and HRMS, and shows absorption in 280-400 nm region with emission at 442 nm in tetrahydrofuran (THF). Addition of fluoride ion to the THF solution of receptor 3 results in color change from colorless to yellow with significant change in UV-Visible absorption. The receptor-anion interaction occurs via hydrogen bonding followed by deprotonation which results in large bathochromic shift in absorption spectra and naked-eye color change. The colorimetric changes show selective response for fluoride ions over other anions. Fluorescence studies exhibit remarkable enhancement in emission intensity upon addition of fluoride ion with a limit of detection (LOD) of 8.6 nM. The ¹H NMR titration studies exhibit deprotonation of the -OH proton of the salicylaldimine moiety resulting significant colorimetric and fluorimetric changes.

Selective luminescent sensing of metal ions and nitroaromatics over a porous mixed-linker cadmium(ii) based metal–organic framework

A potential luminescent sensor based on porous metal organic framework for the detection of metal ions (Al3+, Fe3+ or Cr3+) and nitro-explosive, 2,4,6-tri-nitrophenol has been discovered. MOF is capable of detecting aqueous phase analyte through luminescent sensing.

Surfactant-derived water-soluble carbon dots for quantitative determination of fluoride via a turn-off–on strategy

Surfactants play a vital role as precursors for achieving carbon cores, heteroatom π-systems, and stability in carbon dots (CDs).

Polymorphic solvates, ionic cocrystals and C–N bond formation to form ionic cocrystals in sulfamethoxazole and sulfathiazole-derived urea

Solvates and ionic cocrystals of two sulfa-drug based urea derivatives were studied, where also polymorphs of a solvate, thermal stability, unusual C–N bond formation and desolvation were elucidated.

Bio-inspired Track-Etched Polymeric Nanochannels: Steady-State Biosensors for Detection of Analytes

Bio-inspired polymeric nanochannel (also referred as nanopore)-based biosensors have attracted considerable attention on account of their controllable channel size and shape, multi-functional surface chemistry, unique ionic transport properties, and good robustness for applications. There are already very informative reviews on the latest developments in solid-state artificial nanochannel-based biosensors, however, which concentrated on the resistive-pulse sensing-based sensors for practical applications. The steady-state sensing-based nanochannel biosensors, in principle, have significant advantages over their counterparts in term of high sensitivity, fast response, target analytes with no size limit, and extensive suitable range. Furthermore, among the diverse materials, nanochannels based on polymeric materials perform outstandingly, due to flexible fabrication and wide application. This compressive Review summarizes the recent advances in bio-inspired polymeric nanochannels as sensing platforms for detection of important analytes in living organisms, to meet the high demand for high-performance biosensors for analysis of target analytes, and the potential for development of smart sensing devices. In the future, research efforts can be focused on transport mechanisms in the field of steady-state or resistive-pulse nanochannel-based sensors and on developing precisely size-controlled, robust, miniature and reusable, multi-functional, and high-throughput biosensors for practical applications. Future efforts should aim at a deeper understanding of the principles at the molecular level and incorporating these diverse pore architectures into homogeneous and defect-free multi-channel membrane systems. With the rapid advancement of nanoscience and biotechnology, we believe that many more achievements in nanochannel-based biosensors could be achieved in the near future, serving people in a better way.

Efficient Colorimetric Fluoride Anion Sensor Based on π-Conjugated Carbazole Small Molecule

The ability to detect fluoride anions with high selectivity and sensitivity by using the naked eye is crucial yet challenging. In this study, a novel, simple conjugated organic dye, N-tert-butyldimethylsilyl-3,6-diiodocarbazole (CA-TBMDS) was developed and used for the first time as a colorimetric sensor for fluoride. CA-TBMDS was found to be a highly sensitive fluoride chemosensor, with a detection limit as low as 3 × 10⁻⁵ M. The reaction of CA-TBMDS with fluoride anions in a tetrahydrofuran solution resulted in a color change from colorless to yellow under ambient light, which can be discriminated by the naked eye. The sensor operated via intermolecular proton transfer between the amide units and the fluoride anion, as confirmed by proton nuclear magnetic resonance titration. CA-TBMDS is not only highly sensitive to fluoride anions, but also exhibits high sensitivity in the presence of various ions. This work demonstrates that N-butyldimethylchlorosilane-based organic dyes have prospective utility as a type of fluoride anion chemosensor.

Hydrogen-Bonded Colorimetric and Fluorescence Chemosensor for Fluoride Anion With High Selectivity and Sensitivity: A Review

In recent years, the wide application of fluoride materials has grown rapidly, therefore excessive discharge in the surrounding environment, especially in drinking water and organic effluent, has become a potential hazard to humans, and has even resulted in fluorosis disease. The development of a highly effective and convenient method to recognize fluoride anions in surrounding environments seems necessary and urgent. Among which, the development of a colorimetric and fluorescence fluoride chemosensor with obvious color changing allowing for naked-eye detection with high sensitivity and selectivity is more interesting and challenging. In this minireview, current novel colorimetric and fluorescence chemosensors for fluoride anions by hydrogen-bond interaction are introduced, including obvious color changing by naked-eye detection, high sensitivity and selectivity, non-pollution and fluoride extraction ability, aqueous detection, and other additional functions. Finally, the perspective of the fluoride chemosensor design concept and potential evolution trends are pointed out.

The fluoride permeation pathway and anion recognition in Fluc family fluoride channels

Fluc family fluoride channels protect microbes against ambient environmental fluoride by undermining the cytoplasmic accumulation of this toxic halide. These proteins are structurally idiosyncratic, and thus the permeation pathway and mechanism have no analogy in other known ion channels. Although fluoride-binding sites were identified in previous structural studies, it was not evident how these ions access aqueous solution, and the molecular determinants of anion recognition and selectivity have not been elucidated. Using x-ray crystallography, planar bilayer electrophysiology, and liposome-based assays, we identified additional binding sites along the permeation pathway. We used this information to develop an oriented system for planar lipid bilayer electrophysiology and observed anion block at one of these sites, revealing insights into the mechanism of anion recognition. We propose a permeation mechanism involving alternating occupancy of anion-binding sites that are fully assembled only as the substrate approaches.

Highly efficient coumarin-derived colorimetric chemosensors for sensitive sensing of fluoride ions and their applications in logic circuits

In this study, three new compounds 6-substituted-3-acetylcoumarin 4-(2'-isocamphanyl)thiosemicarbazones (3a, 3b, and 3c) were facilely synthesized and employed as colorimetric chemosensors for fluoride ions. The recognition behaviors of receptors 3a, 3b, and 3c toward F^- were investigated by using UV-vis absorption spectroscopy. Among them, the receptor 3c displayed more superior sensitivity and rapid response time toward F^- with a swift naked-eye color change from colorless to purple, and its detection limit was as low as 6.3 × 10^-7 M, and the binding constant was calculated to be 2.58 × 10⁴ M^-1. Furthermore, the interaction mechanism between the receptor 3c and F^- was studied by ¹H NMR, HRMS, and density functional theory (DFT) studies, suggesting that initial formation of a hydrogen-bonded host-guest complex and the subsequent deprotonation of receptor 3c upon the addition of excess F^-, which was responsible for the remarkable changes in the absorption spectra of 3c. Besides, a combinatorial logic circuit of IMPLICATION and INHIBITION gates at the molecular level was fabricated using the reversibility of receptor 3c toward F^- and Mg²⁺. Finally, the test strips coated with receptor 3c revealed a good sensitivity for F^- in an aqueous medium. Apart from that, the excellent performance of receptor 3c for detecting F^- was reconfirmed by grinding them with KBr powder.

Fluoride ion promoted NH deprotonation of dioxaPhlorin with NIR absorption vs. acid induced facile conversion to aromatic dioxaSapphyrin: Synthesis, spectroscopic and theoretical characterization

Synthesis, spectroscopic and solid state structural proof of hitherto unknown highly stable meso-pyrrole appended expanded dioxaphlorin is reported. The macrocycle was susceptible to NH deprotonation upon TBAF titration leading to NIR absorption with vivid colour change to the naked eye paving the way towards the application as a fluoride ion sensor. Contrarily, efficient conversion to aromatic dioxasapphyrin has been anticipated upon trifluoroacetic acid reaction owing to facile elimination of meso-appended pyrrole ring. The conformational preorganzation and anion induced conformational reorganization owing to the base promoted NH deprotonation are thoroughly investigated by various spectroscopic techniques and DFT level theoretical calculations.

Carbazole sulfonamide-based macrocyclic receptors capable of selective complexation of fluoride ion

Two carbazole sulfonamide-based macrocycles 1 and 2 were facilely synthesized and carefully evaluated for their anion recognition properties. The obtained results revealed that macrocycle 1 with a 1,3-xylyl linker was able to bind fluoride ion more strongly and selectively in acetonitrile medium than its strong competitors (like acetate and dihydrogen phosphate anions), with a large binding constant (K_a) of 50 878 M⁻¹. More importantly, an exclusive fluoride recognition was achieved for macrocycle 1 in the more polar DMSO-d₆ solution, albeit with a moderate affinity of K_a = 147 M⁻¹. Compared with macrocycle 1, macrocycle 2 bearing a 2,6-lutidinyl linkage exhibited a remarkable change not only in the anion affinity but also in the anion selectivity, although with only a slight difference in their molecular structures.

Two carbazole sulfonamide-based macrocycles 1 and 2 were facilely synthesized and carefully evaluated for their anion recognition properties.

AIE-based fluorescent sensors for low concentration toxic ion detection in water

Ions, including anions and heavy metals, are extremely toxic and easily accumulate in the human body, threatening the health of humans and even causing human death at low concentrations. It is therefore necessary to detect these toxic ions in low concentrations in water. Fluorescent sensing is a good method for detecting these ions, but some conventional dyes often exhibit an aggregation caused quench (ACQ) effect in their solid state, limiting their large-scale application. Fluorescent probes based on aggregation-induced emission (AIE) properties have received significant attention due to their high fluorescence quantum yields in their nano aggragated states, easy fabrication, use of moderate conditions, and selevtive recognization of organic/inorganic compounds in water with obvious changes in fluorescence. We surmarize the recent advances of AIE-based sensors for low concentration toxic ion detection in water. The detection probes can be divided into three categories: chemical reaction types, chemical interaction types and physical interaction types. Chemical reaction types utilize nucleophilic addition and coordination reaction, while chemical interaction types rely on hydrogen bonding and anion-π interactions. The physical interaction types are composed of electrostatic attractions. We finally comment on the challenges and outlook of AIE-active sensors.

Sensing mechanism of fluorogenic urea with fluoride in solvent media: A new fluorescence quenching mechanism

The interaction of 1-Phenyl-3-(pyren-1-yl) urea (LH) and fluoride anion (F^-) with a unique ON¹-OFF-ON² fluorescent response has been investigated by the density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations. The hydrogen-bonding dynamics and photophysical properties of the complex LH-F, as well as its isolated receptor LH and anion form L-H₁, have been studied in detail. We demonstrate that the intermolecular hydrogen bond (N-H…F) of the complex LH-F is greatly enhanced in the electronically excited state. The nonradiative deactivation via electron transfer and internal conversion rather than excited-state intramolecular proton transfer (ESIPT) can be facilitated by the excited state hydrogen bond strengthening. The results have been cross-validated by molecular structure, electronic spectra, frontier molecular orbitals, and infrared spectra as well as hydrogen bond binding energy. These results indicate that the current calculations completely reproduce the experimental results and provide compelling evidence for the sensing mechanism of LH for F^-.

Membrane Exporters of Fluoride Ion

Microorganisms contend with numerous and unusual chemical threats and have evolved a catalog of resistance mechanisms in response. One particularly ancient, pernicious threat is posed by fluoride ion (F^-), a common xenobiotic in natural environments that causes broad-spectrum harm to metabolic pathways. This review focuses on advances in the last ten years toward understanding the microbial response to cytoplasmic accumulation of F^-, with a special emphasis on the structure and mechanisms of the proteins that microbes use to export fluoride: the CLC^F family of F^-/H⁺ antiporters and the Fluc/FEX family of F^- channels.