Giant Optical Anisotropy in a Covalent Molybdenum Tellurite via Oxyanion Polymerization

Large birefringence is a crucial but hard-to-achieve optical parameter that is a necessity for birefringent crystals in practical applications involving modulation of the polarization of light in modern opto-electronic areas. Herein, an oxyanion polymerization strategy that involves the combination of two different types of second-order Jahn-Teller distorted units is employed to realize giant anisotropy in a covalent molybdenum tellurite. Mo(H2O)Te2O7 (MTO) exhibits a record birefringence value for an inorganic UV-transparent oxide crystalline material of 0.528 @ 546 nm, which is also significantly larger than those of all commercial birefringent crystals. MTO has a UV absorption edge of 366 nm and displays a strong powder second-harmonic generation response of 5.4 times that of KH2PO4. The dominant roles of the condensed polytellurite oxyanions [Te8O20]8- in combination with the [MoO6]6- polyhedra in achieving the giant birefringence in MTO are clarified by structural analysis and first-principles calculations. The results suggest that polymerization of polarizability-anisotropic oxyanions may unlock the promise of birefringent crystals with exceptional birefringence.

Cd2 Nb2 Te4 O15 : A Novel Pseudo-Aurivillius-Type Tellurite with Unprecedented Nonlinear Optical Properties and Excellent Stability

Oxides are emerging candidates for mid-infrared (mid-IR) nonlinear optical (NLO) materials. However, their intrinsically weak second harmonic generation (SHG) effects hinder their further development. A major design challenge is to increase the nonlinear coefficient while maintaining the broad mid-IR transmission and high laser-induced damage threshold (LIDT) of the oxides. In this study, it is reported on a polar NLO tellurite, Cd2 Nb2 Te4 O15 (CNTO), featuring a pseudo-Aurivillius-type perovskite layered structure composed of three types of NLO active groups, including CdO6 octahedra, NbO6 octahedra, and TeO4 seesaws. The uniform orientation of the distorted units induces a giant SHG response that is ≈31 times larger than that of KH2 PO4 , the largest value among all reported metal tellurites. Additionally, CNTO exhibits a large band gap (3.75 eV), a wide optical transparency window (0.33-14.5 µm), superior birefringence (0.12@ 546 nm), high LIDT (23 × AgGaS2 ), and strong acid and alkali resistance, indicating its potential as a promising mid-IR NLO material.

Noncentrosymmetric γ-Cs2I4O11 Obtained from IO4 Polyhedral Rearrangements in the Centrosymmetric β-Phase

We report the synthesis and optical properties of noncentrosymmetric (NCS) γ-Cs₂I₄O₁₁ that was obtained through IO₄ polyhedral rearrangements from centrosymmetric (CS) β-Cs₂I₄O₁₁. Trifluoroacetic acid (TFA) acts as a structure-directing agent and plays a key role in the synthesis. It is suggested that the function of TFA is to promote rearrangement reactions found in the organic synthesis of stereoisomers. γ-Cs₂I₄O₁₁ crystallizes in the NCS monoclinic space group P2₁ (No. 4) and exhibits a strong second-harmonic-generation (SHG) response of 5.0 × KDP (KH₂PO₄) under 1064 nm laser radiation. Additional SHG experiments indicate that the material is type I phase matchable. First-principles calculations show that SHG intensity mainly comes from its d₃₄, d₂₁, and d₂₃ SHG tensor components. The synthetic strategy of discovering γ-Cs₂I₄O₁₁ provides a new way for designing novel NCS SHG materials.

BaLiTe2O5X (X = Cl, Br): mixed alkali/alkaline-earth metal tellurite halides with [Te2O5]∞ chains

Isostructural BaLiTe₂O₅X (X = Cl, Br) feature [BaLiTe₂O₅]_∞ double layers, demonstrating wide optical bandgaps and large birefringence.

Pb2Cd(SeO3)2X2 (X = Cl and Br): two halogenated selenites with phase matchable second harmonic generation

The second harmonic generation (SHG) efficiencies of Pb₂Cd(SeO₃)₂X₂ (X = Cl and Br) are higher than that of commercial KDP (KH₂PO₄) and their laser damage thresholds are 30 times more than that of AGS (AgGaS₂).

Expansion of the structural diversity of f-element bearing molybdate iodates: synthesis, structures, and optical properties

Expanding the family of f-element bearing molybdate iodates has resulted in eleven new complexes with periodically evolved topologies and intriguing optical properties.

A Large Family of Centrosymmetric and Chiral f-Element-Bearing Iodate Selenates Exhibiting Coordination Number and Dimensional Reductions

The exploration of phase formation in the f-element-bearing iodate selenate system has resulted in 14 novel rare-earth-containing iodate selenates, Ln(IO₃)(SeO₄) (Ln = La, Ce, Pr, Nd; LnISeO-1), Ln(IO₃)(SeO₄)(H₂O) (Ln = Sm, Eu; LnISeO-2), and Ln(IO₃)(SeO₄)(H₂O)₂·H₂O (Ln = Gd, Dy, Ho, Er, Tm, Yb, Lu, Y; LnISeO-3), as well as two new thorium iodate selenates, Th(OH)(IO₃)(SeO₄)(H₂O) (ThISeO-1) and Th(IO₃)₂(SeO₄) (ThISeO-2). LnISeO-3 and ThISeO-2 crystallize in the chiral space group P2₁2₁2₁, while LnISeO-1, LnISeO-2, and ThISeO-1 crystallize in the centrosymmetric space group P2₁/c. The numbers of both coordinating and hydrating water molecules crystallized in LnISeO-1, LnISeO-2, and LnISeO-3 increase along these three series, in line with the increasingly negative values of hydration enthalpies of heavier trivalent lanthanide ions. Such a systematic change in compositions, especially the first coordination sphere of Ln, further induces structural rearrangements, including coordination number and dimensional reductions. More specifically, the structures of LnISeO-1, LnISeO-2, and LnISeO-3 have undergone transitions from 2D Ln-oxo layers with 10-coordinate Ln centers to 1D Ln-oxo chains with 9-coordinate Ln centers and then to 0D Ln-oxo monomers with 8-coordinate Ln centers, respectively. The formation and characterization of this large family of Ln/Th iodate selenates suggest that such a mixed-anion system not only exhibits richer structural chemistry but also can be capable of generating intriguing properties, such as the second-harmonic generation (SHG) effect.

A series of new silver selenites with d0-TM cations

Four silver selenites containing d⁰-TM cations have been reported, one of them displays a moderately strong SHG response.

Structural and magnetic studies on three new mixed metal copper(II) selenites and tellurites

Three new transition metal copper(II) selenites or tellurites, namely, CdCu(SeO3)2 (1), HgCu(SeO3)2 ()2, and Hg2Cu3(Te3O8)2 (3), have been obtained by conventional hydrothermal reactions of CdO (or Hg2Cl2), CuO and SeO2 (or TeO2). Compounds 1 and 2 are isostructural and crystallize in P2(1)/c. Their structures feature a 3D anionic framework of Cu(SeO3)2(2-) with 1D channels of eight-membered rings (MRs) along the c-axis and a-axis, respectively, which are filled by Cd(2+) or Hg(2+) cations. Compound 3 crystallizes in a tetragonal system of space group P42(1)2. Its structure is characterized by a [Cu3(Te3O8)2](2-) honeycomb layer composed of [Te3O8](4-) anions interconnected by Cu(2+) ions with 1D channels of 8-MRs along the c-axis. TOPOS analysis indicates that the copper(ii) tellurite layer exhibits a new topological structure with a Schläfli symbol of {4(6)·8(9)}(2){4(6)}(3). The above anionic copper(II) tellurite layers are further linked by dumbbell Hg2(2+) cations to form a novel 3D framework. Magnetic measurements based on magnetic susceptibility and heat capacity indicate that compounds 1 and 2 show a spin-singlet ground state with a spin gap based on the [Cu2O8](12-) dimeric model, whereas compound e3 xhibits a 2D spin-system with an antiferromagnetic ordering around 25 K correlated with its honeycomb [Cu3(Te3O8)2](2-) layer. Furthermore, crystalline structures, thermal stabilities, IR spectra and UV-Vis diffuse reflectance spectra have also been studied.

PbPt(IO3)6(H2O): a new polar material with two types of stereoactive lone-pairs and a very large SHG response

A new polar material containing two types of stereoactive lone-pairs has been synthesized. The unique parallel alignment of the stereoactive lone-pairs on Pb(2+) cations and the synergistic effect of two types of stereoactive lone-pairs on I(5+) and Pb(2+) cations make it exhibit a very large second-harmonic generation response of about 8 × KDP (KH(2)PO(4)).

A series of new phases in the alkali metal-Nb(V)/Ta(V)-Se(IV)/Te(IV)-O systems

Six new phases in the alkali metal-Nb(V)/Ta(V)-Se(IV)/Te(IV)-O systems have been prepared by solid-state reactions at high-temperatures. Their structures were determined by single-crystal X-ray diffraction studies. AM(3)O(6)(QO(3))(2) (A = K, Rb, M = Nb, Ta, Q = Te; A = K, M = Nb, Q = Se) are isomorphous and their structures feature a 3D network with 1D 4- and 6-MRs tunnels along the a-axis which is composed of 2D layers of corner-sharing MO(6) octahedra bridged by QO(3) groups. The alkali metal ions are located at the above 1D tunnels of 6-MRs. The structure of Cs(3)Nb(9)O(18)(TeO(3))(2)(TeO(4))(2) features a thick Nb-Te-O layer built of corner-sharing NbO(6) octahedra, TeO(3) and TeO(4) groups. The 2D layer of the NbO(6) octahedra with 1D tunnels of 6-MRs along the c-axis are formed by 1D chains of NbO(6) chains along the c-axis and linear Nb(4)O(21) tetramers by corner-sharing. The TeO(3) and TeO(4) groups are grafted on both sides of the niobium-oxide layer via Nb-O-Te or/and Te-O-Te bridges. The caesium(i) ions are located at the above 1D tunnels of 6-MRs. TGA, UV-vis and infrared spectral measurements as well as electronic structure calculations have also been performed.