Metal-Free Cyanation of gem-Difluoroalkenes via Azide-Mediated C-C Double Bond Fragmentation

Activation and cleavage of C-C double bonds are long-standing challenges in synthetic chemistry. Herein, we report an unprecedented azide-mediated C-C double bond fragmentation of gem-difluoroalkenes under mild and metal-free conditions, enabling the efficient synthesis of structurally diverse aromatic nitriles in moderate to good yields. This protocol is also amenable to the cyanation of gem-dichloro and dibromo alkenes. This reaction features simple operation and good functional group compatibility and can be implemented at a gram scale.

Transition Metal-Free N-S Bond Cleavage and C-N Bond Activation of Ugi-Adducts for Rapid Preparation of Primary Amides and α-Ketoamides

A novel method of transition metal-free N-S bond cleavage and subsequent C-N bond activation of Ugi-adducts was developed. Diverse primary amides and α-ketoamides were prepared in a rapid, step-economical and highly efficient manner in two steps. This strategy features excellent chemoselectivity, high yield and functional-group tolerance. Primary amides derived from the pharmaceuticals probenecid and febuxostat were prepared. This method opens a new pathway for the simultaneous synthesis of primary amides and α-ketoamides in an environmentally friendly manner.

Synthesis and catalytic performance of nickel phosphinite pincer complexes in deoxygenative hydroboration of amides

A series of imino-POCN^R, amino-POCN^R2, and bis(phosphinite) POCOP pincer complexes of Ni(II) were prepared and tested in catalytic deoxygenative hydroboration of amides with HBPin to the corresponding amines. In contrast to the deoxygenative hydrosilylation approach, primarily developed for tertiary amides, superior reactivity in Ni-catalyzed deoxygenative hydroboration was demonstrated for secondary carboxamides. The bis(phosphinite) hydride complex (POCOP)NiH proved the most active in these reactions, tolerating potentially reducible functionalities such as internal alkenes, esters, nitriles, heteroaromatic compounds, and tertiary amides. Preferable hydroboration of secondary amides was also demonstrated in the presence of primary amide functionalities. The reactions were conducted at 60-80 °C, representing a rare example of a base-metal catalytic system for selective deoxygenation of secondary amides to the corresponding amines under mild conditions. In contrast to secondary amides, deoxygenative hydroboration of primary amides was demonstrated using an iminophosphinite pre-catalyst (POCN^Dmp)Ni(CH₂TMS) (Dmp = 2,6-Me₂C₆H₃). Deoxygenation reactions were suggested to proceed via a direct C-O bond cleavage mechanism, which is triggered by dehydrogenative N-borylation to access more electrophilic N-borylamides amenable to the addition of HBPin to the carbonyl group.

Photoredox/Nickel Dual-Catalyzed Stereoselective Synthesis of Distal Cyano-Substituted Enamides

Herein, the efficient photoredox/nickel dual-catalyzed cyanoalkylation reaction of enamides is illustrated. A wide scope of enamides and cycloketone oxime esters was well-tolerated, affording the synthetically versatile and geometrically defined β-cyanoalkylated enamide scaffolds. The synthetic practicality of this protocol was revealed by gram-scale reactions, further transformations of enamides, and late-stage modifications of biologically active molecules.

Aryl acrylonitriles synthesis enabled by palladium-catalyzed α-alkenylation of arylacetonitriles with vinyl halides/triflates

Aryl acrylonitriles are an important subclass of acrylonitriles in the medicinal chemistry and pharmaceutical industry. Herein, an efficient synthesis of aryl acrylonitrile derivatives using a Palladium/NIXANTPHOS-based catalyst system was developed. This approach furnishes a variety of substituted and functionalized aryl acrylonitriles (up to 95% yield). The scalability of the transformation and the synthetic versatility of aryl acrylonitrile were demonstrated.

Catalytic Cyanation of C-N Bonds with CO2/NH3

Cyanation of benzylic C-N bonds is useful in the preparation of important α-aryl nitriles. The first general catalytic cyanation of α-(hetero)aryl amines, analogous to the Sandmeyer reaction of anilines, was developed using reductive cyanation with CO₂/NH₃. A broad array of α-aryl nitriles was obtained in high yields and regioselectivity by C-N cleavage of intermediates as ammonium salts. Good tolerance of functional groups such as ethers, CF₃, F, Cl, esters, indoles, and benzothiophenes was achieved. Using ¹³CO₂, a ¹³C-labeled tryptamine homologue (five steps, 31% yield) and Cysmethynil (six steps, 37% yield) were synthesized. Both electronic and steric effects of ligands influence the reactivity of alkyl nickel species with electrophilic silyl isocyanates and thus determine the reactivity and selectivity of the cyanation reaction. This work contributes to the understanding of the controllable activation of CO₂/NH₃ and provides the promising potential of the amine cyanation reaction in the synthesis of bio-relevant molecules.

Nitrile Synthesis via Desulfonylative-Smiles Rearrangement

Herein, we designed a simple nitrile synthesis from N-[(2-nitrophenyl)sulfonyl]benzamides via base-promoted intramolecular nucleophilic aromatic substitution. The process features redox-neutral conditions as well as no requirement of toxic cyanide species and transition metals. Our process shows broad scope and various functional group compatibility, affording a variety of (hetero)aromatic nitriles in good to excellent yields.

Preparation of Polyfunctionalized Aromatic Nitriles from Aryl Oxazolines

A selective ortho,ortho'-functionalization of readily available aryl oxazolines by two successive magnesiations with sBu2 Mg in toluene followed by trapping reactions with electrophiles, such as (hetero)aryl iodides or bromides, iodine, tosyl cyanide, ethyl cyanoformate or allylic bromides (39 examples, 62-99 % yield) is reported. Treatment of these aryl oxazolines with excess oxalyl chloride and catalytic amounts of DMF (50 °C, 4 h) provided the corresponding nitriles (36 examples, 73-99 % yield). Conversions of these nitriles to valuable heterocycles are reported, and a tentative mechanism is proposed.

Copper-Catalyzed One-Pot Synthesis of Quinazolinones from 2-Nitrobenzaldehydes with Aldehydes: Application toward the Synthesis of Natural Products

A novel, efficient, and atom-economical approach for the construction of quinazolinones from 2-nitrobenzaldehydes has been unveiled via copper-catalyzed nitrile formation, hydrolysis, and reduction in one pot for the first time. In this reaction, urea is used as a source of nitrogen for nitrile formation, hydrazine hydrate is used for both the reduction of the nitro group and the hydrolysis of nitrile, and atmospheric oxygen is used as the sole oxidant. The method portrays a wide substrate scope with good functional group tolerances. Moreover, this method was applied for the synthesis of schizocommunin, tryptanthrin, phaitanthrin-A, phaitanthrin-B, and 8H-quinazolino[4,3-b]quinazolin-8-one.

Deoxygenative hydroboration of carboxamides: a versatile and selective synthetic approach to amines

Deoxygenative reduction of amides is considered as an attractive method for preparation of synthetically valuable amines. However, the low electrophilicity of the amide carbonyl group, high thermodynamic stability and kinetic inertness of the amides make their reduction a challenging task. Until recently, most efforts for catalytic deoxygenation of amides to amines were concentrated on hydrogenation and hydrosilylation approaches, which mainly employed precious metal catalysts and often required harsh reaction conditions and showed insufficient selectivities. Moreover, these reactions are mostly limited to secondary and tertiary amides, whereas direct reduction of primary amides to primary amines remained arduous. In contrast, deoxygenative hydroboration of amides, although it appeared less then a decade ago, has already proved advantageous in terms of the amide scope, reaction conditions and selectivity of transformations. This article provides an overview of the developments in hydroboration of amides, focusing on mechanistic aspects of these transformations and advantages of hydroboration compared to hydrogenation and hydrosilylation approaches.

Hydrosilylative reduction of primary amides to primary amines catalyzed by a terminal [Ni-OH] complex

A terminal [Ni-OH] complex 1, supported by triflamide-functionalized NHC ligands, catalyzes the hydrosilylative reduction of a range of primary amides into primary amines in good to excellent yields under base-free conditions with key functional group tolerance. Catalyst 1 is also effective for the reduction of a variety of tertiary and secondary amides. In contrast to literature reports, the reactivity of 1 towards amide reduction follows an inverse trend, i.e., 1° amide > 3° amide > 2° amide. The reaction does not follow a usual dehydration pathway.

Facile Preparation of Aryl Nitriles from Aryl Aldehydes in PEG-DME 250

:

A facie and efficient method for one-pot transformation of aryl aldehydes to aryl nitriles using hydroxylamine hydrochloride and phosphorus tribromide in PEG-DME 250 is reported. The conversion of various aryl aldehydes to the corresponding aryl nitriles occurred smoothly in high yields under the present reaction conditions.

Metal carbonyl clusters of groups 8-10: synthesis and catalysis

In this review article, we discuss advances in the chemistry of metal carbonyl clusters (MCCs) spanning the last three decades, with an emphasis on the more recent reports and those involving groups 8-10 elements. Synthetic methods have advanced and been refined, leading to higher-nuclearity clusters and a wider array of structures and nuclearities. Our understanding of the electronic structure in MCCs has advanced to a point where molecular chemistry tools and other advanced tools can probe their properties at a level of detail that surpasses that possible with other nanomaterials and solid-state materials. MCCs therefore advance our understanding of structure-property-reactivity correlations in other higher-nuclearity materials. With respect to catalysis, this article focuses only on homogeneous applications, but it includes both thermally and electrochemically driven catalysis. Applications in thermally driven catalysis have found success where the reaction conditions stabilise the compounds toward loss of CO. In more recent years, MCCs, which exhibit delocalised bonding and possess many electron-withdrawing CO ligands, have emerged as very stable and effective for reductive electrocatalysis reactions since reduction often strengthens M-C(O) bonds and since room-temperature reaction conditions are sufficient for driving the electrocatalysis.

Ni-Catalyzed radical cyclization of vinyl azides with cyclobutanone oxime esters to access cyanoalkyl containing quinoxalin-2(1H)-ones

A nickel-catalyzed cascade addition/cyclization of 2-azido-N-arylacrylamides and cyclobutanone oxime esters for the construction of 3-cyanoalkylated quinoxalin-2(1H)-ones is developed. This reaction proceeds under mild conditions with good functional group tolerance and broad substrate scope. A preliminary mechanistic experiment indicated that the cyanoalkyl radical might be involved in this transformation.

Iodine Promoted Conversion of Esters to Nitriles and Ketones under Metal-Free Conditions

We report a novel strategy to prepare valuable nitriles and ketones through the conversion of esters under metal-free conditions. By using the I₂/PCl₃ system, various substrates including aliphatic and aromatic esters could react with acetonitrile and arenes to afford the desired products in good to excellent yields. This method is compatible with a number of functional groups and provides a simple and practical approach for the synthesis of nitrile compounds and aryl ketones.

Organic synthesis with the most abundant transition metal–iron: from rust to multitasking catalysts

The promising aspects of iron in synthetic chemistry are being explored for three-four decades as a green and eco-friendly alternative to late transition metals. This present review unveils these rich iron-chemistry towards different transformations.

Aerobic oxidation of primary benzylic amines to amides and nitriles catalyzed by ruthenium carbonyl clusters carrying N,O-bidentate ligands

Four trinuclear ruthenium carbonyl clusters, (6-BrPyCHRO)₂Ru₃(CO)₈ (R = 4-OCH₃C₆H₄, 1a; R = 4-BrC₆H₄, 1b) and (2-OC₆H₄-HC[double bond, length as m-dash]N-C₆H₄R)₂Ru₃(CO)₈ (R = 4-OCH₃, 2a; R = 4-Br, 2b), were synthesized from the reactions of Ru₃(CO)₁₂ with the corresponding N,O-bidentate ligands (two pyridyl alcohols and two Schiff bases) respectively in a ratio of 1 : 2. Three new complexes 1b, 2a and 2b have been fully characterized by elemental analysis, FT-IR, NMR and X-ray crystallography. The catalytic activity of these ruthenium complexes for the aerobic oxidation of primary benzylic amines to amides and nitriles in the presence of t-BuOK was investigated, of which the Schiff base complex 2a was found to exhibit the highest activity.

NHC-catalyzed silylative dehydration of primary amides to nitriles at room temperature

Herein we report an abnormal N-heterocyclic carbene catalyzed dehydration of primary amides in the presence of a silane. This process bypasses the energy demanding 1,2-siloxane elimination step usually required for metal/silane catalyzed reactions. A detailed mechanistic cycle of this process has been proposed based on experimental evidence along with computational study.

Visible-light photoredox-catalyzed dual C–C bond cleavage: synthesis of 2-cyanoalkylsulfonylated 3,4-dihydronaphthalenes through the insertion of sulfur dioxide

A novel visible-light photoredox-catalyzed dual C–C bond cleavage of methylenecyclopropanes and cycloketone oximes for accessing 2-cyanoalkylsulfonated 3,4-dihydronaphthalenes is established.

A combined experimental and computational study of NHC-promoted desulfonylation of tosylated aldimines

NHC-catalyzed mild desulfonylation of tosylated aldimines provides efficient access to aryl nitriles with broad substrate scope. DFT calculations demonstrate that the reaction undergoes multiple stepwise processes.

Recent developments in dehydration of primary amides to nitriles

Various dehydration methods available for the direct conversion of amides to the corresponding nitriles have been reviewed.

Base Metal Catalysts for Deoxygenative Reduction of Amides to Amines

The development of efficient methodologies for production of amines attracts significant attention from synthetic chemists, because amines serve as essential building blocks in the synthesis of many pharmaceuticals, natural products, and agrochemicals. In this regard, deoxygenative reduction of amides to amines by means of transition-metal-catalyzed hydrogenation, hydrosilylation, and hydroboration reactions represents an attractive alternative to conventional wasteful techniques based on stoichiometric reductions of the corresponding amides and imines, and reductive amination of aldehydes with metal hydride reagents. The relatively low electrophilicity of the amide carbonyl group makes this transformation more challenging compared to reduction of other carbonyl compounds, and the majority of the reported catalytic systems employ precious metals such as platinum, rhodium, iridium, and ruthenium. Despite the application of more abundant and environmentally benign base metal (Mn, Fe, Co, and Ni) complexes for deoxygenative reduction of amides have been developed to a lesser extent, such catalytic systems are of great importance. This review is focused on the current achievements in the base-metal-catalyzed deoxygenative hydrogenation, hydrosilylation, and hydroboration of amides to amines. Special attention is paid to the design of base metal catalysts and the mechanisms of such catalytic transformations.

An effective preparation of both 1,3-diketones and nitriles from alkynones with oximes as hydroxide sources

An effective phosphine-catalyzed protocol has been established for the syntheses of 1,3-diketones and nitriles from alkynones with oximes as hydroxide surrogates. This method features the use of a phosphine catalyst, compatibility with various functional groups and ambient temperature, which makes this approach very practical. A plausible mechanism was proposed.

Haridasan R, Das A, Ahmed J, Mandal SK. Primary amides to amines or nitriles: a dual role by a single catalyst

We report the first earth abundant single mononuclear Mn(iii) complex which can selectively and catalytically transform primary amides to nitriles as well as reduce primary amides to amines.

A two-step telescoped continuous flow switchable process leading to nitriles, diaziridine or hydrazine derivatives

Primary and benzylic alcohols were converted into nitriles on a continuous flow MJOD reactor platform or with a batch protocol. The two steps process involves TEMPO as the precatalyst with DIH and DCH as the terminal oxidants, respectively.

POCN Ni(ii) pincer complexes: synthesis, characterization and evaluation of catalytic hydrosilylation and hydroboration activities

(POCN)Ni(ii) complexes were found to mediate a variety of carbonyl hydroboration reactions, including chemoselective hydroboration of benzaldehyde and hydroborative reduction of amides.