Mechanistic investigations of the Fe(ii) mediated synthesis of squaraines

The scission and homologation of CO is a fundamental process in the Fischer-Tropsch reaction. However, given the heterogeneous nature of the catalyst and forcing reaction conditions, it is difficult to determine the intermediates of this reaction. Here we report detailed mechanistic insight into the scission/homologation of CO by two-coordinate iron terphenyl complexes. Mechanistic investigations, conducted using in situ monitoring and reaction sampling techniques (IR, NMR, EPR and Mössbauer spectroscopy) and structural characterisation of isolable species, identify a number of proposed intermediates. Crystallographic and IR spectroscopic data reveal a series of migratory insertion reactions from 1Mes to 4Mes. Further studies past the formation of 4Mes suggest that ketene complexes are formed en route to squaraine 2Mes and iron carboxylate 3Mes, with a number of ketene containing structures being isolated, in addition to the formation of unbound, protonated ketene (8). The synthetic and mechanistic studies are supported by DFT calculations.

Unlocking the Metalation Applications of TMP-powered Fe and Co(II) bis(amides): Synthesis, Structure and Mechanistic Insights

Typified by LiTMP and TMPMgCl.LiCl, (TMP=2,2,6,6-tetramethylpiperidide), s-block metal amides have found widespread applications in arene deprotonative metalation. On the contrary, transition metal amides lack sufficient basicity to activate these substrates. Breaking new ground in this field, here we present the synthesis and full characterisation of earth-abundant transition metals M(TMP)2 (M=Fe, Co). Uncovering a new reactivity profile towards fluoroarenes, these amide complexes can promote direct M-H exchange processes regioselectively using one or two of their basic amide arms. Remarkably, even when using a perfluorinated substrate, selective C-H metalation occurs leaving C-F bonds intact. Their kinetic basicity can be boosted by LiCl or NBu4Cl additives which enables formation of kinetically activated ate species. Combining spectroscopic and structural studies with DFT calculations, mechanistic insights have been gained on how these low polarity metalation processes take place. M(TMP)2 can also be used to access ferrocene and cobaltocene by direct deprotonation of cyclopentadiene and undergo efficient CO2 insertion of both amide groups under mild reaction conditions.

Trisyl-based multidentate ligands: synthesis and their transition-metal complexes

Herein we report the synthesis and applications of unusual trisyl-based multidentate ligands [trisyl = tris(trimethylsilyl)methyl, -C(SiMe₃)₃]. First, by applying a new trisyl synthon (Me₃Si)₂CH(SiMe₂CH₂Cl) 1, trisyl-based S- or N-containing compounds 2 were efficiently obtained. On treatment of these compounds 2 with MeLi, their corresponding S- or N-coordinated pincer-like trisyl-based lithium salts 3, including the S-bridged ditrisyl compound 3a [Li{C(SiMe₃)₂SiMe₂CH₂SCH₂SiMe₂C(SiMe₃)₂}Li(DME)₃] and the N-coordinated monotrisyl compounds 3b [(NacNac^DippLiCH₂SiMe₂C(SiMe₃)₂Li(THF)], 3c [Li(THF){C(SiMe₃)₂SiMe₂CH₂N(Me)CH₂C₅H₄N-2}], and 3d [Li{C(SiMe₃)₂SiMe₂CH₂N(Me)CH₂CH₂N(ⁱPr)₂}] were synthesized and structurally characterized by single-crystal X-ray structural analysis. Second, to test these novel lithium salts as straightforward precursors for the synthesis of transition-metal complexes with unique structures, these lithium salts were applied to react with MCl₂ (M = Cr, Mn, Fe, Co). Their corresponding transition-metal complexes 4-8 were obtained in high yields and structurally characterized by single-crystal X-ray structural analysis. Third, the preliminary reactivities of compound 4 were explored.

High-spin carbonyl complexes of iron(I) and cobalt(I)

Metal carbonyl complexes are almost exclusively found in a low-spin state due to the strong-field nature of the CO ligand. Here the characterisation of highly labile three-coordinate metal(I) monocarbonyl complexes of iron and cobalt is presented. Experimental and quantum chemical examinations reveal their high-spin configuration.

Homoleptic quasilinear metal(i/ii) silylamides of Cr-Co with phenyl and allyl functions - impact of the oxidation state on secondary ligand interactions

Herein we describe the synthesis and characterization of a variety of new quasilinear metal(i/ii) silylamides of the type [M(N(Dipp)SiR₃)₂]^0,- (M = Cr-Co) with different silyl substituents (SiR₃ = SiPh_3-nMe_n (n = 1-3), SiMe₂(allyl)). By comparison of the solid state structures we show that in the case of phenyl substituents secondary metal-ligand interactions are suppressed upon reduction of the metal. Introduction of an allyl substituted silylamide gives divalent complexes with additional metal-π-alkene interactions with only weak activation of the C[double bond, length as m-dash]C bond but substantial bending of the principal N-M-N axis. 1e^--reduction makes cobalt a more strongly bound alkene substituent, whereas for chromium, reduction and intermolecular dimerisation of the allyl unit are observed. It thus indicates that the general view of low-coordinate 3d-metal ions as electron deficient seems not to apply to anionic metal(i) complexes. Additionally, the obtained cobalt(i) complexes are reacted with an aryl azide giving trigonal imido metal complexes. These can be regarded as rare examples of high-spin imido cobalt compounds from their structural and solution magnetic features.

Low-Coordinate Iron Chalcogenolates and Their Complexes with Diethyl Ether and Ammonia

Treatment of Fe{N(SiMe₃)₂}₂ with 2 equiv of the appropriate phenol or thiol affords the dimers {Fe(OC₆H₂-2,6-Bu^t₂-4-Me)₂}₂ (1) and {Fe(OC₆H₃-2,6-Bu^t₂)₂}₂ (2) or the monomeric Fe{SC₆H₃-2,6-(C₆H₃-2,6-Prⁱ₂)₂}₂ (3) in moderate to excellent yields. Recrystallization of 1 and 2 from diethyl ether gives the corresponding three-coordinate ether complexes Fe(OC₆H₃-2,6-Bu^t₂-4-Me)₂(OEt₂) (4) and Fe(OC₆H₃-2,6-Bu^t₂)₂(OEt₂) (5). In contrast, no diethyl ether complex is formed by the dithiolate 3. The ¹H NMR spectra of 4 and 5 show equilibria between the ether complexes and the base-free dimers. A comparison of these spectra with those of the dimeric 1 and 2 allows an unambiguous assignment of the paramagnetically shifted signals. Treatment of 1 with excess ammonia gives the tetrahedral diammine Fe(OC₆H₂-2,6-Bu^t₂-4-Me)₂(NH₃)₂ (6). Ammonia is strongly coordinated in 6, with no apparent loss of ammine ligand either in solution or upon heating under low pressure. In contrast, significantly weaker ammonia coordination is observed when dithiolate 3 is treated with excess ammonia, which gives the diammine Fe{SC₆H₃-2,6-(2,6-Prⁱ₂-C₆H₃)₂}₂(NH₃)₂ (7). Complex 7 readily loses ammonia either in solution or under reduced pressure to give the monoammine complex Fe{SC₆H₃-2,6-(2,6-Prⁱ₂-C₆H₃)₂}₂(NH₃) (8). The weak binding of ammonia by iron thiolate 7 reflects the likely behavior of the proposed iron-sulfur active site in nitrogenases, where release of ammonia is required to close the catalytic cycle.

Self-assembly of an organometallic Fe9O6 cluster from aerobic oxidation of (tmeda)Fe(CH2tBu)2

Aerobic oxidation of (tmeda)Fe(CH₂^tBu)₂ in toluene or THF solution leads to the self-assembly of a magic-sized all-ferrous oxide cluster containing the Fe₉O₆ subunit and bearing organometallic and diamine ligands. Mössbauer studies of the cluster are consistent with an all-ferrous assignment and magnetometry reveals complex intracluster and intercluster magnetic interactions.

A transition metal–gallium cluster formed via insertion of “GaI”

Synthesis of a new transition metal-group 13 cluster from a low-coordinate diaryl and “GaI”, demonstrates entry into new cluster compounds.

Low-coordinate first-row transition metal complexes in catalysis and small molecule activation

In this Perspective, we will highlight selected examples of transition metal complexes with low coordination numbers whose high reactivity has been exploited in catalysis and the activation of small molecules featuring strong bonds (N₂, CO₂, and CO).

Selective reduction and homologation of carbon monoxide by organometallic iron complexes

Carbon monoxide is a key C₁ feedstock for the industrial production of hydrocarbons, where it is used to make millions of tonnes of chemicals, fuels, and solvents per annum. Many transition metal complexes can coordinate CO, but the formation of new C−C bonds in well-defined compounds from the scission and subsequent coupling of two or more CO moieties at a transition metal centre remains a challenge. Herein, we report the use of low-coordinate iron(II) complexes for the selective scission and homologation of CO affording unusual squaraines and iron carboxylates at ambient temperature and pressure. A modification of the ligand framework allows for the isolation and structural characterisation of a proposed metallacyclic Fe(II) carbene intermediate. These results indicate that, with the appropriate choice of supporting ligands, it is possible to cleave and homologate carbon monoxide under mild conditions using an abundant and environmentally benign low-coordinate, first row transition metal.

Metal-mediated activation of CO for C-C coupling reactions is a valuable approach to carbon monoxide valorization. Here, the authors use low-coordinate iron(II) complexes for the selective scission and homologation of CO affording unusual squaraines and iron carboxylates under mild conditions.

Effects of Remote Ligand Substituents on the Structures, Spectroscopic, and Magnetic Properties of Two-Coordinate Transition-Metal Thiolate Complexes

The first-row transition-metal(II) dithiolates M(SAr^iPr₄)₂ [Ar^iPr₄ = C₆H₃-2,6-(C₆H₃-2,6-iPr₂)₂; M = Cr (1), Mn (3), Fe (4), Co (5), Ni (6), and Zn (7)] and Cr(SAr^Me₆)₂ [2; Ar^Me₆ = C₆H₃-2,6-(C₆H₂-2,4,6-Me₃)₂] and the ligand-transfer reagent (NaSAr^iPr₄)₂ (8) are described. In contrast to their M(SAr^iPr₆)₂ (M = Cr, Mn, Fe, Co, Ni, and Zn; Ar^iPr₆ = C₆H₃-2,6-(C₆H₂-2,4,6-iPr₃)₂) congeners, which differ from 1 and 3-6 in having p-isopropyl groups on the flanking aryl rings of the terphenyl substituents, compounds 1 and 4-6 display highly bent coordination geometries with S-M-S angles of 109.802(2)° (1), 120.2828(3)° (4), 91.730(3)° (5), and 92.68(2)° (6) as well as relatively close metal-flanking aryl ring η⁶ interactions with metal-centroid distances of 2.11477(6) Å (1), 1.97188(3) Å (2), 2.15269(6) Å (4), 1.62058(9) Å (5), and 1.724(8) Å (6). However, the d⁵ (Mn) and d¹⁰ (Zn) complexes 3 and 7 display linear or near-linear coordination with no close metal-ligand distances. The nonlinear geometries of 1 and 4-6 also contrast with those of their Ar^iPr₄-substituted alkoxo and amido congeners, which have strictly linear coordination. Complexes 1-7 were synthesized by the reaction of the lithium or sodium thiolate salt with the metal dihalide or, in the case of 3, by the reaction of the thiol with the amido complex Mn[N(SiMe₃)₂]₂. All compounds were characterized by electronic spectroscopy, X-ray crystallography, and magnetic measurements using Evans' method and SQUID magnetometry. It was concluded that, despite the large bulk of the Ar^iPr₄ substituents, the absence of p-isopropyl groups on the flanking rings of the ligand permits close secondary metal-flanking ring distances. The compounds are characterized by more intense colors and display magnetic moments that are generally lower than the spin-only values, in agreement with the covalent character of the close metal-flanking ring η⁶ interactions.

Philip Power at 65: an icon of organometallic chemistry

We are delighted to present this collection of articles to celebrate the work of Philip Power on the occasion of his 65th birthday.

Heteroleptic, two-coordinate [M(NHC){N(SiMe3)2}] (M = Co, Fe) complexes: synthesis, reactivity and magnetism rationalized by an unexpected metal oxidation state

The linear, two-coordinate and isostructural heteroleptic [M(IPr){N(SiMe₃)₂}] (IPr = 1,3-bis(diisopropylphenyl)-imidazol-2-ylidene), formally M^I complexes (M = Co, 3; Fe, 4) were obtained by the reduction of [M(IPr)Cl{N(SiMe₃)₂}] with KC₈, or [Co(IPr){N(SiMe₃)₂}₂] with mes*PH₂, mes* = 2,4,6-tBu₃C₆H₂. The magnetism of 3 and 4 implies Co^II and Fe^II centres coupled to one ligand-delocalized electron, in line with XPS and XANES data; the ac susceptibility of 4 detected a pronounced frequency dependence due to slow magnetization relaxation. Reduction of [Fe(IPr)Cl{N(SiMe₃)₂}] with excess KC₈ in toluene gave the heteronuclear 'inverse-sandwich' Fe-K complex 7, featuring η⁶-toluene sandwiched between one Fe⁰ and one K⁺ centre.

Cyclotrimerisation of isocyanates catalysed by low-coordinate Mn(ii) and Fe(ii) m-terphenyl complexes

Isocyanurates can be synthesised through the cyclotrimerisation of primary isocyanates catalysed by low-coordinate manganese(ii) and iron(ii) m-terphenyl complexes under mild conditions.

Synthesis and Structural Characterization of Lithium and Titanium Complexes Bearing a Bulky Aryloxide Ligand Based on a Rigid Fused-Ring s-Hydrindacene Skeleton

The bulky aryl alcohols, (Rind)OH (1) [Rind = EMind (a) and Eind (b)], based on the rigid fused-ring 1,1,3,3,5,5,7,7-octa-R-substituted s-hydrindacene skeleton were prepared by the reaction of (Rind)Li with nitrobenzene followed by protonation. The treatment of 1 with (n)BuLi affords the lithium aryloxide dimers [(Rind)OLi(THF)]2 (2) or trimers [(Rind)OLi]3 (3), depending on the employed solvents (THF = tetrahydrofuran). The salt metathesis reaction of [(EMind)OLi(THF)]2 (2a) with TiCl4(THF)2 leads to the formation of the mononuclear diamagnetic mono- and bis(aryloxide) Ti(IV) complexes, [(EMind)O]TiCl3(THF) (4a) and [(EMind)O]2TiCl2 (5a). We also isolated a trace amount of the tris(aryloxide) Ti(IV) complex, [(EMind)O]3TiCl (6a). The reaction between 2a and TiCl3(THF)3 resulted in the isolation of the mononuclear paramagnetic mono- and bis(aryloxide) Ti(III) complexes, [(EMind)O]TiCl2(THF)2 (7a) and [(EMind)O]2TiCl(THF)2 (8a). The discrete monomeric structures of the titanium complexes 4a, 5a, 6a, 7a, and 8a were determined by X-ray crystallography.

Iron(ii) β-ketiminate complexes as mediators of controlled radical polymerisation

A series of novel iron(ii) β-ketiminate complexes have been prepared and screened in styrene and methyl methacrylate CRP.

Quasi-three-coordinate iron and cobalt terphenoxide complexes {Ar(iPr8)OM(μ-O)}2 (Ar(iPr8) = C6H-2,6-(C6H2-2,4,6-(i)Pr3)2-3,5-(i)Pr2; M = Fe or Co) with M(III)2(μ-O)2 core structures and the peroxide dimer of 2-oxepinoxy relevant to benzene oxidation

The bis(μ-oxo) dimeric complexes {Ar(iPr8)OM(μ-O)}2 (Ar(iPr8) = C6H-2,6-(C6H2-2,4,6-(i)Pr3)2-3,5-(i)Pr2; M = Fe (1), Co (2)) were prepared by oxidation of the M(I) half-sandwich complexes {Ar(iPr8)M(η(6)-arene)} (arene = benzene or toluene). Iron species 1 was prepared by reacting {Ar(iPr8)Fe(η(6)-benzene)} with N2O or O2, and cobalt species 2 was prepared by reacting {Ar(iPr8)Co(η(6)-toluene)} with O2. Both 1 and 2 were characterized by X-ray crystallography, UV-vis spectroscopy, magnetic measurements, and, in the case of 1, Mössbauer spectroscopy. The solid-state structures of both compounds reveal unique M2(μ-O)2 (M = Fe (1), Co(2)) cores with formally three-coordinate metal ions. The Fe···Fe separation in 1 bears a resemblance to that in the Fe2(μ-O)2 diamond core proposed for the methane monooxygenase intermediate Q. The structural differences between 1 and 2 are reflected in rather differing magnetic behavior. Compound 2 is thermally unstable, and its decomposition at room temperature resulted in the oxidation of the Ar(iPr8) ligand via oxygen insertion and addition to the central aryl ring of the terphenyl ligand to produce the 5,5'-peroxy-bis[4,6-(i)Pr2-3,7-bis(2,4,6-(i)Pr3-phenyl)oxepin-2(5H)-one] (3). The structure of the oxidized terphenyl species is closely related to that of a key intermediate proposed for the oxidation of benzene.

Ligand field influence on the electronic and magnetic properties of quasi-linear two-coordinate iron(ii) complexes

The magnetic properties and ligand-field effects for quasi-linear iron(ii) complexes are explored with the aid of theoretical models.

DFT study of the reaction of a two-coordinate iron(II) dialkyl complex with molecular oxygen

DFT studies are reported of a monomeric iron dialkyl for which oxygen atom insertion into metal-methyl bonds occurs with O2: FeMe2 + O2 → Fe(OMe)2. Computation of the reaction coordinate implicates the intermediacy of Fe(III)-peroxo, Fe(VI)-dioxo, and Fe(IV)-oxo intermediates, connected by O2 oxidative addition and two methyl migration steps. Analysis of the reaction of O2 with d(6)-Fe(Me)2 indicates that oxy-insertion for this iron complex occurs with lower free energy barriers than competing homolytic/radical pathways, exploiting "spin-flip" processes via minimum energy crossing points (MECPs).

Oxy-functionalization of Group 9 and 10 transition metal methyl ligands: use of pyridine-based hemi-labile ligands

Hemi-labile ligands (HLLs) are intriguing candidates for catalysts since they may facilitate bond activation and bond formation through facile ligand dissociation/association.