Relationship between stability and bioluminescence color of firefly luciferase

An insight into the potentials of carbon dots for in vitro live-cell imaging: recent progress, challenges, and prospects

Carbon dots (CDs) are a strong alternative to conventional fluorescent probes for cell imaging due to their brightness, photostability, tunable fluorescence emission, low toxicity, inexpensive preparation, and chemical diversity. Improving the targeting efficiency by modulation of the surface functional groups and understanding the mechanisms of targeted imaging are the most challenging issues in cell imaging by CDs. Firstly, we briefly discuss important features of fluorescent CDs for live-cell imaging application in this review. Then, the newest modulated CDs for targeted live-cell imaging of whole-cell, cell organelles, pH, ions, small molecules, and proteins are elaborately discussed, and their challenges in these fields are explained.

Bioenergetic Heterogeneity in Mycobacterium tuberculosis Residing in Different Subcellular Niches

ATP/ADP depicts the bioenergetic state of Mycobacterium tuberculosis (Mtb). However, the metabolic state of Mtb during infection remains poorly defined due to the absence of appropriate tools. Perceval HR (PHR) was recently developed to measure intracellular ATP/ADP levels, but it cannot be employed in mycobacterial cells due to mycobacterial autofluorescence. Here, we reengineered the ATP/ADP sensor Perceval HR into PHR-mCherry to analyze ATP/ADP in fast- and slow-growing mycobacteria. ATP/ADP reporter strains were generated through the expression of PHR-mCherry. Using the Mtb reporter strain, we analyzed the changes in ATP/ADP levels in response to antimycobacterial agents. As expected, bedaquiline induced a decrease in ATP/ADP. Interestingly, the transcriptional inhibitor rifampicin led to the depletion of ATP/ADP levels, while the cell wall synthesis inhibitor isoniazid did not affect the ATP/ADP levels in Mtb. The usage of this probe revealed that Mtb faces depletion of ATP/ADP levels upon phagocytosis. Furthermore, we observed that the activation of macrophages with interferon gamma and lipopolysaccharides leads to metabolic stress in intracellular Mtb. Examination of the bioenergetics of mycobacteria residing in subvacuolar compartments of macrophages revealed that the bacilli residing in phagolysosomes and autophagosomes have significantly less ATP/ADP than the bacilli residing in phagosomes. These observations indicate that phagosomes represent a niche for metabolically active Mtb, while autophagosomes and phagolysosomes harbor metabolically quiescent bacilli. Interestingly, even in activated macrophages, Mtb residing in phagosomes remains metabolically active. We further observed that macrophage activation affects the metabolic state of intracellular Mtb through the trafficking of Mtb from phagosomes to autophagosomes and phagolysosomes.

The elusive relationship between structure and colour emission in beetle luciferases

In beetles, luciferase enzymes catalyse the conversion of chemical energy into light through bioluminescence. The principles of this process have become a fundamental biotechnological tool that revolutionized biological research. Different beetle species can emit different colours of light, despite using the same substrate and highly homologous luciferases. The chemical reasons for these different colours are hotly debated yet remain unresolved. This Review summarizes the structural, biochemical and spectrochemical data on beetle bioluminescence reported over the past three decades. We identify the factors that govern what colour is emitted by wild-type and mutant luciferases. This topic is controversial, but, in general, we note that green emission requires cationic residues in a specific position near the benzothiazole fragment of the emitting molecule, oxyluciferin. The commonly emitted green-yellow light can be readily changed to red by introducing a variety of individual and multiple mutations. However, complete switching of the emitted light from red to green has not been accomplished and the synergistic effects of combined mutations remain unexplored. The minor colour shifts produced by most known mutations could be important in establishing a 'mutational catalogue' to fine-tune emission of beetle luciferases, thereby expanding the scope of their applications.

Histidine substitution in the most flexible fragments of firefly luciferase modifies its thermal stability

Molecular dynamics (MD) at two temperatures of 300 and 340 K identified two histidine residues, His461 and His489, in the most flexible regions of firefly luciferase, a light emitting enzyme. We therefore designed four protein mutants H461D, H489K, H489D and H489M to investigate their enzyme kinetic and thermodynamic stability changes. Substitution of His461 by aspartate (H461D) decreased ATP binding affinity, reduced the melting temperature of protein by around 25 °C and shifted its optimum temperature of activity to 10 °C. In line with the common feature of psychrophilic enzymes, the MD data showed that the overall flexibility of H461D was relatively high at low temperature, probably due to a decrease in the number of salt bridges around the mutation site. On the other hand, substitution of His489 by aspartate (H489D) introduced a new salt bridge between the C-terminal and N-terminal domains and increased protein rigidity but only slightly improved its thermal stability. Similar changes were observed for H489K and, to a lesser degree, H489M mutations. Based on our results we conclude that the MD simulation-based rational substitution of histidines by salt-bridge forming residues can modulate conformational dynamics in luciferase and shift its optimal temperature activity.

SpyTag/SpyCatcher Cyclization Enhances the Thermostability of Firefly Luciferase

SpyTag can spontaneously form a covalent isopeptide bond with its protein partner SpyCatcher. Firefly luciferase from Photinus pyralis was cyclized in vivo by fusing SpyCatcher at the N terminus and SpyTag at the C terminus. Circular LUC was more thermostable and alkali-tolerant than the wild type, without compromising the specific activity. Structural analysis indicated that the cyclized LUC increased the thermodynamic stability of the structure and remained more properly folded at high temperatures when compared with the wild type. We also prepared an N-terminally and C-terminally shortened form of the SpyCatcher protein and cyclization using this truncated form led to even more thermostability than the original form. Our findings suggest that cyclization with SpyTag and SpyCatcher is a promising and effective strategy to enhance thermostability of enzymes.

SpyTag/SpyCatcher Cyclization Enhances the Thermostability of Firefly Luciferase

SpyTag can spontaneously form a covalent isopeptide bond with its protein partner SpyCatcher. Firefly luciferase from Photinus pyralis was cyclized in vivo by fusing SpyCatcher at the N terminus and SpyTag at the C terminus. Circular LUC was more thermostable and alkali-tolerant than the wild type, without compromising the specific activity. Structural analysis indicated that the cyclized LUC increased the thermodynamic stability of the structure and remained more properly folded at high temperatures when compared with the wild type. We also prepared an N-terminally and C-terminally shortened form of the SpyCatcher protein and cyclization using this truncated form led to even more thermostability than the original form. Our findings suggest that cyclization with SpyTag and SpyCatcher is a promising and effective strategy to enhance thermostability of enzymes.

The role of proline substitutions within flexible regions on thermostability of luciferase

Improving the stability of firefly luciferase has been a critical issue for its wider industrial applications. Studies about hyperthermophile proteins show that flexibility could be an effective indicator to find out weak spots to engineering thermostability of proteins. However, the relationship among flexibility, activity and stability in most of proteins is unclear. Proline is the most rigid residue and can be introduced to rigidify flexible regions to enhance thermostability of proteins. We firstly apply three different methods, molecular dynamics (MD) simulation, B-FITTER and framework rigidity optimized dynamics algorithm (FRODA) to determine the flexible regions of Photinus pyralis luciferase: Fragment 197-207; Fragment 471-481 and Fragment 487-495. Then, introduction of proline is used to rigidify these flexible regions. Two mutants D476P and H489P within most flexible regions are finally designed. In the results, H489P mutant shows improved thermostability while maintaining its catalytic efficiency compared to that of wild type luciferase. Flexibility analysis confirms that the overall rigidity and local rigidity of H489P mutant are greatly strengthened. D476P mutant shows decreased thermosatbility and the reason for this is elucidated at the molecular level. S307P mutation is randomly chosen outside the flexible regions as a control. Thermostability analysis shows that S307P mutation has decreased kinetic stability and enhanced thermodynamic stability.

Bioluminescence imaging: a shining future for cardiac regeneration

Advances in bioanalytical techniques have become crucial for both basic research and medical practice. One example, bioluminescence imaging (BLI), is based on the application of natural reactants with light-emitting capabilities (photoproteins and luciferases) isolated from a widespread group of organisms. The main challenges in cardiac regeneration remain unresolved, but a vast number of studies have harnessed BLI with the discovery of aequorin and green fluorescent proteins. First described in the luminous hydromedusan Aequorea victoria in the early 1960s, bioluminescent proteins have greatly contributed to the design and initiation of ongoing cell-based clinical trials on cardiovascular diseases. In conjunction with advances in reporter gene technology, BLI provides valuable information about the location and functional status of regenerative cells implanted into numerous animal models of disease. The purpose of this review was to present the great potential of BLI, among other existing imaging modalities, to refine effectiveness and underlying mechanisms of cardiac cell therapy. We recount the first discovery of natural primary compounds with light-emitting capabilities, and follow their applications to bioanalysis. We also illustrate insights and perspectives on BLI to illuminate current efforts in cardiac regeneration, where the future is bright.

The chemistry of bioluminescence: an analysis of chemical functionalities

Firefly luciferase is one of the most studied bioluminescent systems, both theoretically and experimentally. Herein we review the current understanding of the bioluminescent process from a chemical functionality perspective based on those investigations. Three key components are emphasized: the chemiluminophore, the electron-donating fragment, and how these are affected by the substrate-enzyme interaction. The understanding is based on details of how the peroxide -O-O- bond supports the production of electronically excited products and how the charge-transfer (CT) mechanism, with the aid of an electron-donating group, lowers the activation barrier to support a reaction occurs in living organisms. For the substrate-enzyme complex it is demonstrated that the enzyme can affect the hydrogen-bonding around the CT-controlling group, resulting in a mechanism for color modulation. Finally, we analyse other luciferin-luciferase systems and compare them to the key chemical functionalities of the fragments of the luciferin-luciferase complex with respect to similarities and differences.

Molecular enigma of multicolor bioluminescence of firefly luciferase

Firefly luciferase-catalyzed reaction proceeds via the initial formation of an enzyme-bound luciferyl adenylate intermediate. The chemical origin of the color modulation in firefly bioluminescence has not been understood until recently. The presence of the same luciferin molecule, in combination with various mutated forms of luciferase, can emit light at slightly different wavelengths, ranging from red to yellow to green. A historical perspective of development in understanding of color emission mechanism is presented. To explain the variation in the color of the bioluminescence, different factors have been discussed and five hypotheses proposed for firefly bioluminescence color. On the basis of recent results, light-color modulation mechanism of firefly luciferase propose that the light emitter is the excited singlet state of OL(-) [(1)(OL(-))*], and light emission from (1)(OL(-))* is modulated by the polarity of the active-site environment at the phenol/phenolate terminal of the benzothiazole fragment in oxyluciferin.

Systematic Theoretical Investigation on the Light Emitter of Firefly

This is a systematic theoretical investigation on all the possible light emitters of firefly using a multireference method. Six chemical forms of oxyluciferin (OxyLH2) molecules/anions were studied by a multistate complete active space second-order perturbation (MS-CASPT2) method in vacuum and dimethyl sulfoxide. The calculated results and subsequent analysis excluded enol-OxyLH2, keto-OxyLH2, and enolate-OxyLH(-) as possible light emitters. The remaining three candidates, phenolate-enol-OxyLH(-), phenolate-keto-OxyLH(-), and OxyL(2-), were further investigated in protein by a MS-CASPT2/molecular mechanics (MM) study to explain the natural bioluminescence of firefly. By comparison of the MS-CASPT2/MM calculated results of phenolate-enol-OxyLH(-), phenolate-keto-OxyLH(-), and OxyL(2-) with the experimental observation and detailed analysis, we concluded that the direct decomposition excited-state product of firefly dioxetanone in vivo and the only light emitter of firefly in natural bioluminescence is the first singlet excited state (S1) of phenolate-keto-OxyLH(-).

Spectroscopic studies on the irreversible heat-induced structural transition of Pin1

Previously, the mechanism of the thermal unfolding of Pin1 (on-line measurements) was studied, revealing that Pin1 has a relatively high thermal stability. However, it is still questionable whether the unfolding of Pin1 is reversible. In the present work, intrinsic tryptophan fluorescence, ANS fluorescence, RLS, FTIR and CD spectroscopies are used to evaluate the reversibility of the thermal unfolding of Pin1. Intrinsic tryptophan fluorescence studies indicate that structural changes around tryptophan motifs in Pin1 are possibly reversible after heat treatment (even above 98°C), for no significant change in the intensity or λ(max) of the spectra was observed. ANS fluorescence measurements indicate the irreversible exposure of the hydrophobic clusters in Pin1 after heat treatment at 98°C, with increase in the fluorescence intensity and blue shift in λmax. Also, RLS signals of the Pin1-ANS system increased after heat treatment, possibly implying both the unfolding and the aggregation of Pin1. In addition, FTIR and CD results confirmed the irreversible unfolding of the secondary structure in Pin1 after heat treatment above 90°C, showing decreases in both α-helix and β-sheet. In summary, the present work mainly suggests that heat treatment, especially above 90°C, has an important impact on the structural stability of Pin1, and the structural unfolding induced by heat was proved to be irreversible.