Low-Background Tip-Enhanced Raman Spectroscopy Enabled by a Plasmon Thin-Film Waveguide Probe

Tip-enhanced Raman spectroscopy (TERS) is a nano-optical approach to extract spatially resolved chemical information with nanometer precision. However, in the case of direct-illumination TERS, which is often employed in commercial TERS instruments, strong fluorescence or far-field Raman signals from the illuminated areas may be excited as a background. They may overwhelm the near-field TERS signal and dramatically decrease the near-field to far-field signal contrast of TERS spectra. It is still challenging for TERS to study the surface of fluorescent materials or a bulk sample that cannot be placed on an Au/Ag substrate. In this study, we developed an indirect-illumination TERS probe that allows a laser to be focused on a flat interface of a thin-film waveguide located far away from the region generating the TERS signal. Surface plasmon polaritons are generated stably on the waveguide and eventually accumulated at the tip apex, thereby producing a spatially and energetically confined hotspot to ensure stable and high-resolution TERS measurements with a low background. With this thin-film waveguide probe, TERS spectra with obvious contrast from a diamond plate can be acquired. Furthermore, the TERS technique based on this probe exhibits excellent TERS signal stability, a long lifetime, and good spatial resolution. This technique is expected to have commercial potential and enable further popularization and development of TERS technology as a powerful analytical method.

Electrochemical Tip-Enhanced Raman Spectroscopy with Improved Sensitivity Enabled by a Water Immersion Objective

Electrochemical tip-enhanced Raman spectroscopy (EC-TERS) appears as a promising in situ nanospectroscopic tool for characterization and understanding of the electrochemical interfacial processes at the nanometer scale and molecular level. However, the wide application of EC-TERS is hampered by its low sensitivity as a result of the optical path distortion due to the refractive index mismatch of the multilayer media (air, glass, and electrolyte). Here, we propose a new side-illumination EC-TERS setup by coupling a water immersion objective with a high numerical aperture to a scanning tunneling microscope scanning head customized with a large open space and a compact spectroelectrochemical cell. It not only effectively eliminates the optical distortion but also increases the sensitivity remarkably, which allows sensitive monitoring of the electrochemical redox processes of anthraquinone molecules. More importantly, EC-TERS is able to independently control the tip position and laser illumination position. By utilizing this feature, we reveal that the irreversible reduction reaction of anthraquinone observed in EC-TERS is induced by the synergistic effect of the negative potential and laser illumination rather than the localized surface plasmon. The highly improved sensitivity and the flexibility to control the tip and laser illumination position on the nanometer scale endows EC-TERS as an important tool for the fundamental understanding of the photo- or plasmon electrochemistry and the interfacial structure-activity relationship of important electrochemical systems.

Amplified cross-linking efficiency of self-assembled monolayers through targeted dissociative electron attachment for the production of carbon nanomembranes

The determination of the negative ion yield of 2'-chloro-1,1'-biphenyl (2-Cl-BP), 2'-bromo-1,1'-biphenyl (2-Br-BP) and 2'-iodo-1,1'-biphenyl (2-I-BP) upon dissociative electron attachment (DEA) at an electron energy of 0 eV revealed cross section values that were more than ten times higher for iodide loss from 2-I-BP than for the other halogenides from the respective biphenyls (BPs). Comparison with dissociative ionization mass spectra shows that the ratio of the efficiency of electron impact ionization induced fragmentation of 2-I-BP, 2-Br-BP, and 2-Cl-BP amounts to approximately 1:0.7:0.6. Inspired by these results, self-assembled monolayers (SAMs) of the respective biphenyl-4-thiols, 2-Cl-BPT, 2-Br-BPT, 2-I-BPT as well as BPT, were grown on a Au(111) substrate and exposed to 50 eV electrons. The effect of electron irradiation was investigated by X-ray photoelectron spectroscopy (XPS), to determine whether the high relative DEA cross section for iodide loss from 2-I-BPT as compared to 2-Br-BP and 2-Cl-BP is reflected in the cross-linking efficiency of SAMs made from these materials. Such sensitization could reduce the electron dose needed for the cross-linking process and may thus lead to a significantly faster conversion of the respective SAMs into carbon nanomembranes (CNMs) without the need for an increased current density. XPS data support the notation that DEA sensitization may be used to achieve more efficient electron-induced cross-linking of SAMs, revealing more than ten times faster cross-linking of 2-I-BPT SAMs compared to those made from the other halogenated biphenyls or from native BPT at the same current density. Furthermore, the transfer of a freestanding membrane onto a TEM grid and the subsequent investigation by helium ion microscopy (HIM) verified the existence of a mechanically stable CNM created from 2-I-BPT after exposure to an electron dose as low as 1.8 mC/cm2. In contrast, SAMs made from BPT, 2-Cl-BPT and 2-Br-BPT did not form stable CNMs after a significantly higher electron dose of 9 mC/cm2.

Rational fabrication of a gold-coated AFM TERS tip by pulsed electrodeposition

Reproducible fabrication of sharp gold- or silver-coated tips has become the bottleneck issue in tip-enhanced Raman spectroscopy, especially for atomic force microscopy (AFM)-based TERS. Herein, we developed a novel method based on pulsed electrodeposition to coat a thin gold layer over atomic force microscopy (AFM) tips to produce plasmonic TERS tips with high reproducibility. We systematically investigated the influence of the deposition potential and step time on the surface roughness and sharpness. This method allows the rational control of the radii of gold-coated TERS tips from a few to hundreds of nanometers, which allows us to systematically study the dependence of the TERS enhancement on the radius of the gold-coated AFM tip. The maximum TERS enhancement was achieved for the tip radius in the range of 60-75 nm in the gap mode. The coated gold layer has a strong adhesion with the silicon tip surface, which is highly stable in water, showing the great potential for application in the aqueous environment.

Modulation of electrochemical hydrogen evolution rate by araliphatic thiol monolayers on gold

Electroreductive desorption of a highly ordered self-assembled monolayer (SAM) formed by the araliphatic thiol (4-(4-(4-pyridyl)phenyl)phenyl)methanethiol leads to a concurrent rapid hydrogen evolution reaction (HER). The desorption process and resulting interfacial structure were investigated by voltammetric techniques, in situ spectroscopic ellipsometry, and in situ vibrational sum-frequency-generation (SFG) spectroscopy. Voltammetric experiments on SAM-modified electrodes exhibit extraordinarily high peak currents, which di er between Au(111) and polycrystalline Au substrates. Association of reductive desorption with HER is shown to be the origin of the observed excess cathodic charges. The studied SAM preserves its two-dimensional order near Au surface throughout a fast voltammetric scan even when the vertex potential is set several hundred millivolt beyond the desorption potential. A model is developed for the explanation of the observed rapid HER involving ordering and pre-orientation of water present in the nanometer-sized reaction volume between desorbed SAM and the Au electrode, by the structurally extremely stable monolayer, leading to the observed catalysis of the HER.

Third-order effects in resonant sum-frequency-generation signals at electrified metal/liquid interfaces

Vibrational sum-frequency-generation (SFG) spectroscopy experiments at electrified interfaces involve incident laser radiation at frequencies in the IR and near-IR/visible regions as well as a static electric field on the surface. Here we show that mixing the three fields present on the surface can result in third-order effects in resonant SFG signals. This was achieved for closed packed self-assembled monolayers (SAMs) with molecular groups of high optical nonlinearity and surface potentials similar to those typically applied in cyclic voltammograms. Broadband SFG spectroscopy was applied to study a hydrophobic well-ordered araliphatic SAM on a Au(111) surface using a thin-layer analysis cell for spectro-electrochemical investigations in a 100 mM NaOH electrolyte solution. Resonant contributions were experimentally separated from non-resonant contributions of the Au substrate and theoretically analyzed using a fitting function including third-order terms. The resulting ratio of third-order to second-order susceptibilities was estimated to be [Formula: see text](10^-10) m/V.

The oriented and patterned growth of fluorescent metal-organic frameworks onto functionalized surfaces

A metal-organic framework (MOF) material, [Zn(2)(adc)(2)(dabco)] (adc = anthracene-9,10-dicarboxylate, dabco = 1,4-diazabicyclo[2.2.2]-octane), the fluorescence of which depends on the loading of its nanopores, was synthesized in two forms: as free-flowing nanocrystals with different shapes and as surface-attached MOFs (SURMOFs). For the latter, we used self-assembled monolayers (SAMs) bearing functional groups, such as carboxylate and pyridyl groups, capable of coordinating to the constituents of the MOF. It could be demonstrated that this directed coordination also orients the nanocrystals deposited at the surface. Using two different patterning methods, i.e., microcontact printing and electron-beam lithography, the lateral distribution of the functional groups could be determined in such a way that the highly localized deposition of the SURMOF films became possible.