Dual-signal fenamithion probe by combining fluorescence with colorimetry based on Rhodamine B modified silver nanoparticles

Dual fluorescence-colorimetric sensor based on silver nanoparticles for determination of tobramycin in its pharmaceutical preparations

The purpose of this study is to develop a dual fluorescence-colorimetric sensor for determination of the non-chromophoric drug, tobramycin using fluorescein-modified silver nanoparticles. Fluorescein is adsorbed on the surface of silver nanoparticles resulting in quenching of the fluorescence intensity of fluorescein at 513 nm. Upon addition of tobramycin to fluorescein-bound silver nanoparticles, tobramycin can displace fluorescein from the surface of nanoparticles resulting in nanoparticles aggregation and liberation of free fluorescein restoring its fluorescence. The interaction of tobramycin with fluorescein-bound silver nanoparticles is manifested by a decrease in the surface plasmon resonance band of silver nanoparticles at 395 nm, an increase in the fluorescence intensity of fluorescein at 513 nm and color change of the colloidal solution from yellow to light pink. These spectral effects are directly proportional to the concentration of tobramycin with a linearity range of 0.10 - 0.45 μg mL-1 and 0.05 - 0.45 μg mL-1 for the spectrophotometric and spectrofluorimetric methods, respectively. The proposed methods were applied for determination of tobramycin in Tobrin® ophthalmic solution with mean %recovery ± standard deviation of 99.036 ± 1.737 for the spectrophotometric method and 101.192 ± 1.315 for the spectrofluorimetric method. The optical sensor is simple, rapid, and cost-effective and can be used for determination of tobramycin in bulk and in its pharmaceutical preparations.

Role of Capping Agent for the Colorimetric and Fluorescent Sensing of Different Materials Using Metal Nanoparticles

Background:

The selection of capping agent depends on the method of synthesis, nature of nanoparticles (NPs), and type of the compounds to be analyzed. Therefore, different types of capping agents such as surfactants, drugs, amino acids, fatty acids, and polymers are used to increase stability of NPs, avoid aggregation, keep NPs away from one another, thereby achieving desired morphology as well as the size of NPs.

Introduction:

Recently, the fabrication of NPs has been extensively carried out using synthetic chemical routes in a wide range of materials. In this review, a comprehensive assessment of the colorimetric and fluorescent sensing of metal nanoparticles using different capped agents, such as surfactants, drugs, amino acids, fatty acids, and polymers has been summarized for the present and future strategies.

Method:

For the synthesis of metal nanoparticles, different methods, metals, and a variety of capping agents are used to obtain new properties and explore opportunities for innovative applications.

Result:

Capping agents perform their significant role as stabilizers to avoid the over-growth and coagulation of nanoparticles.

Conclusion:

Capping agents play an essential role in the colorimetric and fluorescent sensing of metal nanoparticles for particular analytes.

Organic-Molecule-Based Fluorescent Chemosensor for Nerve Agents and Organophosphorus Pesticides

Organophosphorus (OP) compounds are typically a broad class of compounds that possess various uses such as insecticides, pesticides, etc. One of the most evil utilizations of these compounds is as chemical warfare agents, which pose a greater threat than biological weapons because of their ease of access. OP compounds are highly toxic compounds that cause irreversible inhibition of enzyme acetylcholinesterase, which is essential for hydrolysis of neurotransmitter acetylcholine, leading to series of neurological disorders and even death. Due to the extensive use of these organophosphorus compounds in agriculture, there is an increase in the environmental burden of these toxic chemicals, with severe environmental consequences. Hence, the rapid and sensitive, selective, real-time detection of OP compounds is very much required in terms of environmental protection, health, and survival. Several techniques have been developed over a few decades to easily detect them, but still, numerous challenges and problems remain to be solved. Major advancement has been observed in the development of sensors using the spectroscopic technique over recent years because of the advantages offered over other techniques, which we focus on in the presented review.

Recent Advances on Detection of Insecticides Using Optical Sensors

Insecticides are enormously important to industry requirements and market demands in agriculture. Despite their usefulness, these insecticides can pose a dangerous risk to the safety of food, environment and all living things through various mechanisms of action. Concern about the environmental impact of repeated use of insecticides has prompted many researchers to develop rapid, economical, uncomplicated and user-friendly analytical method for the detection of insecticides. In this regards, optical sensors are considered as favorable methods for insecticides analysis because of their special features including rapid detection time, low cost, easy to use and high selectivity and sensitivity. In this review, current progresses of incorporation between recognition elements and optical sensors for insecticide detection are discussed and evaluated well, by categorizing it based on insecticide chemical classes, including the range of detection and limit of detection. Additionally, this review aims to provide powerful insights to researchers for the future development of optical sensors in the detection of insecticides.

Functionalized silver nanoparticles as colorimetric probes for sensing tricyclazole

A colorimetric assay for highly selective and sensitive detection of tricyclazole using fluorescein-functionalized silver nanoparticles (F-AgNPs) as sensing probes was investigated. As the addition of tricyclazole to F-AgNPs, a drastic decrease in the absorbance at 394 nm was detected, which was accompanied with a noticeable color change from yellow to gray. The sensing mechanism involved an interaction between tricyclazole and F-AgNPs, which led to aggregation of the latter, inducing a color change from yellow to gray. An excellent linear calibration curve (R² = 0.9994) was achieved between absorbance at 394 nm and the tricyclazole concentration in the range between 0.06 and 1.0 ppm. Moreover, the detection limit was estimated at 0.051 ppm. The developed colorimetric assay also showed good selectivity and was successfully utilized to quantify tricyclazole in rice samples with satisfactory recoveries. The proposed assay has been successfully applied for monitoring tricyclazole in rice samples.

Dual Fluorescence-colorimetric Silver Nanoparticles Based Sensor for Determination of Olanzapine: Analysis in Rat Plasma and Pharmaceuticals

The present work describes a dual-readout assay for the determination of an antipsychotic drug olanzapine using Rhodamine B modified silver nanoparticles (AgNPs). AgNPs, when mixed with Rhodamine B, quenched its fluorescence emission with high quenching efficiency as evident from the Stern Volmer plot. Transmission electron microscopy image and Dynamic Light Scattering histogram of Rhodamine B bound AgNPs showed a stable monodispersed nanosuspension. Addition of olanzapine to Rhodamine B-bound AgNPs resulted in reappearance of fluorescence, which was dependent on the amount of olanzapine added to the system. Besides displacing the surface bound Rhodamine B molecules, it caused aggregation of AgNPs which formed the basis of dual-readout sensor. Several parameters such as pH, reaction time and order of addition of the three components which may influence the analytical signal were studied and optimized. The method was validated for linearity, sensitivity, selectivity, accuracy, precision and recovery. Based on this dual-readout system, linear concentration range was established from 0.05 to 10 µM (fluorescence measurement) and 5.0 to 50 µM (colorimetric response) for olanzapine. The limit of detection (LOD) using fluorescence and colorimetric approach was 0.013 µM and 1.25 µM, respectively. The proposed method showed excellent selectivity for olanzapine in presence of several antipsychotic drugs, cations, sugars and amino acids. Finally, the method was successfully applied to a pharmacokinetic study of olanzapine in rats and also for analyzing pharmaceutical formulations.

Ultrasensitive fluorescent detection of pesticides in real sample by using green carbon dots

Pesticides, widely used in modern agriculture, could potentially cause environmental pollution and affect human lives. Hence, the development of a highly sensitive sensing element to detect pesticide residues is crucial for food safety and ecosystem protection. Optical methods based on fluorescence properties provide an ideal approach for screening and quantification of these compounds in different medias including water, plant, and nutritional products. The development of fluorescence emitting carbon dot-based sensors for monitoring pesticides has attracted great attention in recent years. In comparison to other fluorophores, carbon dots have more promising optical features, higher quantum yields and better biocompatibility. This article aims to present a novel fluorescent sensing method of diazinon, glyphosate, and amicarbazone using plant-based carbon dots. A comprehensive characterization of carbon dots obtained from cauliflower was performed by methods including UV-visible, FTIR spectroscopy, fluorometry, AFM, DLS, and zeta sizer. Following this step, carbon dots were used to detect pesticides. The fluorescence quenching property of carbon dots has been utilized to identify detection limit of 0.25, 0.5, and 2 ng ml-1 for diazinon, amicarbazone, and glyphosate, respectively. Also, real sample study revealed that the detection of pesticides accompanied by our developed nano-sensor is repeatable and accurate. According to carbon dots specificity determination, the prepared nano sensor does not have the potential to identify "bromacil" and "dialen super" pesticides but the other three mentioned pesticides are detectable. The results confirm that synthesized green carbon dots are well qualified for application in food safety and environmental monitoring.

Ultrasensitive chemiluminescence biosensors using nucleic acid-functionalized silver-cysteine nanowires as signal amplifying labels

Ultrasensitive chemiluminescence (CL) sensors for biomolecules (DNA and proteins) have been developed by adopting DNA-functionalized silver-cysteine hybrid nanowires (p-SCNWs) as signal amplifying labels. The sensing is established from a sandwich-type DNA hybridization, where the target DNA strands are initially hybridized with the capture DNA located at paramagnetic microspheres (PMs) and subsequently hybridized with p-SCNWs functionalized with the signal DNA probe. After magnetic separation, p-SCNWs on the hybrids were completely decomposed with HNO3 to release numerous silver ions. The powerful catalysis of silver ions toward the redox reaction of K2S2O8-Mn2+-H3PO4 causes the generation of KMnO4 that is capable of oxidizing luminol at high pH, triggering an amplified chemiluminescent signal emission. The sensing combines the extraordinary sensitivity of the catalytic chemiluminescence technology and the amplifying strategy via releasing large quantities of silver ions as the catalyst from each hybrid, enabling the assay of target DNA strands at a concentration as low as 0.34 fM. The CL signals associated with single-base pair mismatched DNA strands and non-complementary DNA strands are able to be discriminated well from the CL signal related to the complementary DNA hybridization. Likewise, the combination of p-SCNWs functionalized with an aptamer and PMs/aptamer/thrombin complex allowed the chemiluminescence sensing of thrombin with a low limit of detection corresponding to 0.17 pM.

Development of Dual-Pore Coexisting Branched Silica Nanoparticles for Efficient Gene-Chemo Cancer Therapy

Various strategies for combination therapy to overcome current limitations in cancer therapy have been actively investigated. Among them, simultaneous delivery of multiple drugs is a subject of high interest due to anticipated synergistic effect, but there have been difficulties in designing and developing effective nanomaterials for this purpose. In this work, dual-pore coexisting hybrid porous silica nanoparticles are developed through Volmer-Weber growth pathway for efficient co-delivery of gene and anticancer drug. Based on the different pore sizes (2-3 and 40-45 nm) and surface modifications of the core and branch domains, loading and controlled release of gene and drug are achieved by appropriate strategies for each environment. With excellent loading capacity and low cytotoxicity of the present platform, the combinational cancer therapy is successfully demonstrated against human cervical cancer cell line. Through a series of quantitative analyses, the excellent gene-chemo combinational therapeutic efficiency is successfully demonstrated. It is expected that the present nanoparticle will be applicable to various biomedical fields that require co-delivery of small molecule and nucleic acid.

An on–off–on gold nanocluster-based fluorescent probe for sensitive detection of organophosphorus pesticides

In this study, a highly sensitive fluorescent probe based on bovine serum protein-protected gold nanoclusters (BSA-AuNCs) was developed for the determination of organophosphorus pesticides (OPs).

Determination of aerosol oxidative activity using silver nanoparticle aggregation on paper-based analytical devices

Airborne particulate matter (PM) pollution significantly impacts human health, but the cellular mechanisms of PM-induced toxicity remain poorly understood. A leading hypothesis on the effects of inhaled PM involves the generation of cellular oxidative stress. To investigate PM-induced oxidative stress, analytical methods have been developed to study the chemical oxidation of dithiothreitol (DTT) in the presence of PM. Although DTT readily reacts with several forms of reactive oxygen species, this molecule is not endogenously produced in biological systems. Glutathione (GSH), on the other hand, is an endogenous antioxidant that is produced throughout the body and is directly involved in combating oxidative stress in the lungs and other tissues. We report here a new method for measuring aerosol oxidative activity that uses silver nanoparticle (AgNP) aggregation coupled to glutathione (GSH) oxidation in a paper-based analytical device. In this assay, the residual reduced GSH from the oxidation of reduced GSH to its disulfide induces the aggregation of AgNPs on a paper-based analytical device, which produces a reddish-brown product. Two methods for aerosol oxidative reactivity are presented: one based on change in color intensity using a traditional paper-based techniques and one based on the length of the color product formed using a distance-based device. These methods were validated against traditional spectroscopic assays for DTT and GSH that employ Elman's reagent. No significant difference was found between the levels measured by all three GSH methods (our two paper-based devices and the traditional method) at the 95% confidence level. PM reactivity towards GSH was less than towards DTT most likely due to the difference in the oxidation potential between the two molecules.