Room-Temperature Synthesized Iron/Cobalt Metal-Organic Framework Nanosheets with Highly Efficient Catalytic Activity toward Luminol Chemiluminescence Reaction

Two-dimensional (2D) iron/cobalt metal-organic framework nanosheets (Fe/Co-MOF NSs) were synthesized via the cooperative self-assembly reaction of Fe3+/Co2+ and terephthalic acid at room temperature. The as-prepared 2D Fe/Co-MOF NSs display superior performance in catalysis of the chemiluminescence (CL) reaction between luminol and H2O2. The CL spectrum, UV-vis absorption spectroscopy, radical scavenger experiments, and electron spin resonance (ESR) spectroscopy are utilized to research the possible CL mechanism of the luminol-H2O2-Fe/Co-MOF NSs system. All results indicate that Fe/Co-MOF NSs present outstanding peroxidase-like activity and could catalyze H2O2 to produce 1O2, O2·-, and ·OH, which could react rapidly with the luminol anion radical and result in strong CL. With the highly efficient CL of the luminol-H2O2-Fe/Co-MOF NSs system, a sensitive sensor for the detection of dopamine (DA) is developed based on the inhibitory effect of DA on the CL intensity. Good linearity over the range of 50-800 nM is achieved with a limit of detection of 20.88 nM (S/N = 3). This research demonstrates that 2D Fe/Co-MOF NSs is a highly effective catalyst for luminol CL reaction and has great application potential in the CL field.

Enhanced Luminol Chemiluminescence with Oxidase-like Properties of FeOOH Nanorods for the Sensitive Detection of Uric Acid

FeOOH nanorods, as one-dimensional nanomaterials, have been widely used in many fields due to their stable properties, low cost, and easy synthesis, but their application in the field of chemiluminescence (CL) is rarely reported. In this work, FeOOH nanorods were synthesized by a simple and environmentally friendly one-pot hydrothermal method and used for the first time as a catalyst for generating strong CL with luminol without additional oxidant. Remarkably, luminol-FeOOH exhibits about 250 times stronger CL than the luminol-H₂O₂ system. Its CL intensity was significantly quenched by uric acid. We established a simple, rapid, sensitive, and selective CL method for the detection of uric acid with a linear range of 20-1000 nM and a detection limit of 6.3 nM (S/N = 3). In addition, we successfully applied this method to the detection of uric acid in human serum, and the standard recoveries were 95.6-106.4%.

Nucleotide Interaction with Nanocrystalline Ceria Surface

The adsorption of nucleotides on the surface of nanocrystalline cerium dioxide (pHpzc = 6.3) in NaCl solutions was investigated using multi-batch adsorption experiments over a wide range of pH. The obtained results were interpreted as a formation of outer and inner sphere surface complexes with the participation of phosphate moieties. The Basic Stern surface complexation model was applied to obtain quantitative equilibrium reaction constants.

Atomic Dispersion of Zn2+ on N-Doped Carbon Materials: From Non-Activity to High Activity for Catalyzing Luminol-H2O2 Chemiluminescence

Fe and Co single-atom catalysts (SACs) have been widely explored in many fields, while Zn SACs are still in their infancy stage. Herein, we unexpectedly found that atomically dispersed Zn²⁺ on N-doped carbon material (Zn-N-C) exhibited high catalytic activity on luminol-H₂O₂ chemiluminescence (CL) reaction. The Zn-N-C SACs were readily prepared through simple pyrolyzation of the cheap precursors (dopamine and ZnCl₂). The mechanism of Zn SAC-catalyzed CL reaction of luminol-H₂O₂ was investigated in detail. The activity of Zn SACs originated from the Zn-N sites in the Zn-N-C structure. The monoatomic dispersion makes Zn²⁺ catalytic performance change from no activity to high activity in luminol-H₂O₂ CL reaction. This study demonstrated the particularity of the monatomic metal catalyst over the conventional metal ion. This work provides the unprecedented perspective for design of new metal SACs in CL reaction.

Novel Chemiluminescence Sensor for Thrombin Detection Based on Dual-Aptamer Biorecognition and Mesoporous Silica Encapsulated with Iron Porphyrin

Thrombin is a marker of blood-related diseases, and its detection is of great significance in the fields of medical and biological research. Herein, a novel chemiluminescence (CL) sensor for thrombin detection was prepared based on dual-aptamer biorecognition and mesoporous silica encapsulated with iron porphyrin. Mesoporous silica encapsulated with hematin by aptamer1 (Apt1/hematin/M-SiO₂) and magnetic microspheres modified with aptamer2 (Apt2/NH₂-MS) were successfully prepared, and the two materials were used to construct a CL sensor to detect thrombin. Primarily, Apt2/NH₂-MS is used for pretreatment separation of thrombin samples by the biorecognition effect between the aptamer (Apt2) and target (thrombin). Then, thrombin/Apt2/NH₂-MS is again recognized with Apt1 on the surface of Apt1/hematin/M-SiO₂ and Apt1/thrombin/Apt2/NH₂-MS is formed, so dual-aptamer biorecognition is realized. Meanwhile, the generated Apt1/thrombin/Apt2/NH₂-MS makes Apt1 shed off the surface of M-SiO₂ and release hematin. The released hematin can catalyze the luminol-H₂O₂ CL reaction. Therefore, a sandwich-type CL sensor was constructed based on dual-aptamer biorecognition and hematin catalysis for the detection of thrombin. The sensor has a linear range of 7.5 × 10^-15 to 2.5 × 10^-10 mol·L^-1 and a detection limit of 2.2 × 10^-15 mol·L^-1 and also exhibits excellent selectivity, reproducibility, and stability. The sensor was successfully used for the detection of thrombin in serum samples, which makes it possible to apply the sensor in the detection of thrombin in actual samples.

Evaluation of the Cytotoxicity and Oxidative Stress Response of CeO2-RGO Nanocomposites in Human Lung Epithelial A549 Cells

Graphene-based nanocomposites have attracted enormous interest in nanomedicine and environmental remediation, owing to their unique characteristics. The increased production and widespread application of these nanocomposites might raise concern about their adverse health effects. In this study, for the first time, we examine the cytotoxicity and oxidative stress response of a relatively new nanocomposite of cerium oxide-reduced graphene oxide (CeO₂-RGO) in human lung epithelial (A549) cells. CeO₂-RGO nanocomposites and RGO were prepared by a simple hydrothermal method and characterized by relevant analytical techniques. Cytotoxicity data have shown that RGO significantly induces toxicity in A549 cells, evident by cell viability reduction, membrane damage, cell cycle arrest, and mitochondrial membrane potential loss. However, CeO₂-RGO nanocomposites did not cause statistically significant toxicity as compared to a control. We further observed that RGO significantly induces reactive oxygen species generation and reduces glutathione levels. However, CeO₂-RGO nanocomposites did not induce oxidative stress in A549 cells. Interestingly, we observed that CeO₂ nanoparticles (NPs) alone significantly increase glutathione (GSH) levels in A549 cells as compared to a control. The GSH replenishing potential of CeO₂ nanoparticles could be one of the possible reasons for the biocompatible nature of CeO₂-RGO nanocomposites. Our data warrant further and more advanced research to explore the biocompatibility/safety mechanisms of CeO₂-RGO nanocomposites in different cell lines and animal models.

A Hypericin Delivery System Based on Polydopamine Coated Cerium Oxide Nanorods for Targeted Photodynamic Therapy

Photodynamic therapy (PDT) as a non-aggressive therapy with fewer side effects has unique advantages over traditional treatments. However, PDT still has certain limitations in clinical applications, mainly because most photosensitizers utilized in PDT are hydrophobic compounds, which will self-aggregate in the aqueous phase and cause undesirable effects. In order to resolve this, we utilized the self-polymerization of dopamine molecules under alkaline conditions to coat cerium oxide nanorods (CeONR) with a dense polydopamine (PDA) film. Thereafter, thiolated galactose (Gal-SH) and hypericin (Hyp) were modified and loaded onto the surface to construct CeONR@PDA-Gal/Hyp, respectively, which can be used for targeted photodynamic therapy of human hepatoma HepG2 cells. CeONR@PDA-Gal/Hyp was characterized by transmission electron microscope (TEM), Zeta potential, Ultraviolet-visible (UV-Vis), and fluorescence spectroscopy, respectively. This hypericin delivery system possesses good biocompatibility and specific targeting ability, where the galactose units on the surface of CeONR@PDA-Gal/Hyp can specifically recognize the asialo-glycoprotein receptors (ASGP-R), which overexpress on HepG2 cell membrane. Furthermore, Hyp will detach from the surface of CeONR@PDA-Gal/Hyp after the nanorods enter cancer cells, and shows excellent PDT effect under the irradiation of light with a wavelength of 590 nm. Our work exemplifies a novel targeted delivery of hydrophobic photosensitizers for cancer treatment.

Combinatory Cancer Therapeutics with Nanoceria-Capped Mesoporous Silica Nanocarriers through pH-triggered Drug Release and Redox Activity

In the field of nanomedicine, drug-loaded nanocarriers that integrate nanotechnology and chemotherapeutics are widely used to achieve synergistic therapeutic effects. Here, we prepared mesoporous silica nanoparticles capped with cerium oxide nanoparticles (COP@MSN) wherein a pH trigger-responsive mechanism was used to control drug release and intracellular drug delivery. We blocked the mesopores of the carboxyl-functionalized MSN with aminated COP. These pores could be opened in acidic conditions to release the loaded drug, thus establishing a pH-responsive drug release system. We loaded doxorubicin (DOX) as anticancer biomolecule into the pores of MSN and capped with COP. The COP@DOX-MSN system showed a typical drug release profile in an acidic medium, which, however, was not observed in a neutral medium. In vitro studies using cancer cell line (HeLa) proved that the COP@DOX-MSN entered efficiently into HeLa cells and released DOX to the level sufficient for cytotoxicity. The cytotoxic effect of COP in cancer cells was facilitated by the pro-oxidant property of COPs, which considerably raised the reactive oxygen species (ROS) level, thereby leading to cellular apoptosis. The combination of DOX with COP (COP@DOX-MSN) showed even higher ROS level, demonstrating a cytotoxic synergism of drug and nanoparticle in terms of ROS generation. Collectively, the COP@DOX-MSN is considered useful for cancer treatment with the combined capacity of pH-controlled drug delivery, chemotherapeutics, and redox activity.

Tin oxide nanoparticles modified by copper as novel catalysts for the luminol–H2O2 based chemiluminescence system

Unique catalytic activity was found for SnO₂ nanoparticles modified by copper to enhance the chemiluminescence intensity of the luminol–H₂O₂ system.

Metal Oxide Nanoparticle Based Electrochemical Sensor for Total Antioxidant Capacity (TAC) Detection in Wine Samples

A single-use electrochemical screen-printed electrode is reported based on biomimetic properties of nanoceria particles (CeNPs). The developed tool showed an easy approach compared to the classical spectrophotometric methods reported in literature in terms of ease of use, cost, portability, and unnecessary secondary reagents. The sensor allowed the detection of the total antioxidant capacity (TAC) in wine samples. The sensor has been optimized and characterized electrochemically and then tested with antioxidant compounds occurred in wine samples. The electrochemical CeNPs modified sensor has been used for detection of TAC in white and red commercial wines and the data compared to the 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid (ABTS)-based spectrophotometric method. Finally, the obtained results have demonstrated that the proposed sensor was suitable for the simple and quick evaluation of TAC in beverage samples.

A Self-Contained Chemiluminescent Lateral Flow Assay for Point-of-Care Testing

Immunoassays whose readouts rely on chemiluminescence are increasingly useful for a broad range of analytical applications, but they are rarely made into point-of-care (POC) format because of the complex reagents required (some reagents have to be stored in low temperatures, and some reagents have to be freshly made right before the assay). This study reports a self-contained chemiluminescent lateral flow assay (CLFA), which prestores all necessary reagents. This CLFA contains three parts: the normal lateral flow assay (LFA) strip, the chemiluminescence substrate pad, and the polycarbonate (PC) holder. On the LFA strip, we simultaneously labeled horseradish peroxidase (HRP) and antibody on the gold nanoparticles (AuNPs) for the conjugate pad. For the substrate pad, we used sodium perborate as the oxidant and lyophilized the chemiluminescence substrate on the glass fiber, which allows long-term storage. After the transfer of substrate from the substrate pad to the nitrocellulose (NC) membrane, we captured the chemiluminescence signal for the quantification of the targets. The HRP on the AuNPs can amplify the chemiluminescence signal efficiently. We used this CLFA system to detect both macromolecules and small molecules successfully. This self-contained and easily processable device is exceedingly appropriate for rapid detection and is a convenient platform for POC testing.

Morphology- and pH-dependent peroxidase mimetic activity of nanoceria

The peroxidase mimetic properties of nanoceria have attracted extensive attention in recent years. In this work, the peroxidase mimetic properties of CeO2 nanocrystals with different morphologies, namely, nanocubes and nanorods, were investigated. Two types of oxidative species, HO˙ radicals and peroxide-like intermediates, were identified in the CeO2/H2O2 systems. The formation of these oxidative species is strongly dependent on the pH value and the morphology of the CeO2 nanocrystals. The origin of the peroxidase mimetic activity of nanoceria was mainly ascribed to the presence of HO˙ under acidic conditions, whereas the peroxide-like species also played a major role under neutral and basic conditions. CeO2 nanorods with excellent redox properties and higher concentration of Ce3+ and oxygen vacancies were more favorable for the generation of both HO˙ and peroxide-like intermediates than that of CeO2 nanocubes, exhibiting excellent peroxidase mimetic activity toward 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), methylene blue (MB), and congo red (CR) in the presence of H2O2.

Synergistic and targeted drug delivery based on nano-CeO2 capped with galactose functionalized pillar[5]arene via host-guest interactions

A smart drug delivery system based on porous CeO₂ nano-rods (CeONRs) capped with galactose functionalized pillar[5]arene via host-guest interactions has been constructed, which showed GSH-responsiveness, synergism with anticancer drugs and cancer targeting ability resulting from its disulphide unit, ceria properties and galactose units, respectively.

Cerium oxide nanoparticles: green synthesis and biological applications

CeO2 nanoparticles (NPs) have shown promising approaches as therapeutic agents in biology and medical sciences. The physicochemical properties of CeO2-NPs, such as size, agglomeration status in liquid, and surface charge, play important roles in the ultimate interactions of the NP with target cells. Recently, CeO2-NPs have been synthesized through several bio-directed methods applying natural and organic matrices as stabilizing agents in order to prepare biocompatible CeO2-NPs, thereby solving the challenges regarding safety, and providing the appropriate situation for their effective use in biomedicine. This review discusses the different green strategies for CeO2-NPs synthesis, their advantages and challenges that are to be overcome. In addition, this review focuses on recent progress in the potential application of CeO2-NPs in biological and medical fields. Exploiting biocompatible CeO2-NPs may improve outcomes profoundly with the promise of effective neurodegenerative therapy and multiple applications in nanobiotechnology.

Nucleic acid aptamers in cancer research, diagnosis and therapy

Aptamers are single-stranded DNA or RNA oligomers, identified from a random sequence pool, with the ability to form unique and versatile tertiary structures that bind to cognate molecules with superior specificity. Their small size, excellent chemical stability and low immunogenicity enable them to rival antibodies in cancer imaging and therapy applications. Their facile chemical synthesis, versatility in structural design and engineering, and the ability for site-specific modifications with functional moieties make aptamers excellent recognition motifs for cancer biomarker discovery and detection. Moreover, aptamers can be selected or engineered to regulate cancer protein functions, as well as to guide anti-cancer drug design or screening. This review summarizes their applications in cancer, including cancer biomarker discovery and detection, cancer imaging, cancer therapy, and anti-cancer drug discovery. Although relevant applications are relatively new, the significant progress achieved has demonstrated that aptamers can be promising players in cancer research.

Enhanced photoelectrochemical aptasensing platform based on exciton energy transfer between CdSeTe alloyed quantum dots and SiO2@Au nanocomposites

High-efficient exciton energy transfer between CdSeTe alloyed quantum dots and SiO2@Au nanocomposites was applied to develop an enhanced photoelectrochemical aptasensing platform with ultrahigh sensitivity, good selectivity, reproducibility and stability.

Three-dimensional Fe- and N-incorporated carbon structures as peroxidase mimics for fluorescence detection of hydrogen peroxide and glucose

3D Fe- and N-incorporated carbon structures have been synthesized as peroxidase mimics for fluorescence detection of hydrogen peroxide and glucose.

A promising nanocomposite from CNTs and nano-ceria: nanostructured fillers in polyurethane coatings for surface protection

The balanced combination of nanostructured carbon materials and metal oxide nanoparticles has been considered as an efficient reinforcement material in developing next-generation multifunctional coatings.

An amplified electrochemical aptasensor for thrombin detection based on pseudobienzymic Fe3O4-Au nanocomposites and electroactive hemin/G-quadruplex as signal enhancers

A sensitive and selective electrochemical aptasensor for thrombin detection was constructed based on hemin/G-quadruplex as the signal label and Fe3O4-Au nanocomposites with glucose oxidase (GOx-) and peroxide-mimicking enzyme activity as the signal enhancers. Due to their large surface area and good biocompatibility, Fe3O4-Au nanocomposites were employed to immobilize electroactive hemin/G-quadruplex, which was formed by the conjugation between a single-stranded guanine-rich nucleic acid and hemin. Based on the GOx-mimicking enzyme activity, Au nanoparticles on the surface of the Fe3O4-Au nanocomposites effectively catalyzed the oxidization of glucose in the presence of dissolved O2, accompanied by the production of H2O2. Both the Fe3O4 cores of Fe3O4-Au nanocomposites and hemin/G-quadruplex with H2O2-mimicking enzyme activity could catalyze the reduction of the generated H2O2, which promoted the electron transfer of hemin and amplified the electrochemical signal. The proposed electrochemical aptasensor had a wide dynamic linear range of 0.1 pM to 20 nM with a lower detection limit of 0.013 pM, which provided a promising method for a sensitive assay for the detection of proteins in electrochemical aptasensors.

An electrochemical aptasensor for thrombin using synergetic catalysis of enzyme and porous Au@Pd core-shell nanostructures for signal amplification

In this work, a sensitive electrochemical aptasensor for thrombin (TB) based on synergetic catalysis of enzyme and porous Au@Pd core-shell nanostructure has been constructed. With the advantages of large surface area and outstanding catalytic performance, porous Au@Pd core-shell nanostructures were firstly employed as the nanocarrier for the immobilization of electroactive toluidine blue (Tb), hemin/G-quadruplex formed by intercalating hemin into the TB aptamer (TBA) and glucose oxidase (GOx). As a certain amount of glucose was added into the detection cell, GOx rapidly catalyzed the oxidation of glucose, coupling with the local generation of H2O2 in the presence of dissolved O2. Then, porous Au@Pd nanoparticles and hemin/G-quadruplex as the peroxidase mimics efficiently catalyzed the reduction of H2O2, amplifying the electrochemical signal and improving the sensitivity. Finally, a detection limit of 0.037pM for TB was achieved. The excellent performance of the aptasensor indicated its promising prospect as a valuable tool in simple and cost-effective TB detection in clinical application.

Luminol chemiluminescence enhanced by copper nanoclusters and its analytical application

It was found that Cu nanoclusters could enhance the chemiluminescence (CL) emission from the luminol–hydrogen peroxide system in an alkaline medium.

A chemiluminescence microarray based on catalysis by CeO(2) nanoparticles and its application to determine the rate of removal of hydrogen peroxide by human erythrocytes

In this work, cerium oxide nanoparticles are capable of strongly enhancing the chemiluminescence (CL) of the luminol-hydrogen peroxide (H2O2) system. Based on this, a microarray CL method for the determination of the removal rate constant of H2O2 by human erythrocytes has been developed. It is providing direct evidence for a H2O2-removing enzyme in human erythrocytes that acts as the predominant catalyst. A reaction mechanism is discussed. The proposed microarray CL method is sensitive, selective, simple and time-saving, and has good reproducibility and high throughput. Relative CL intensity is linearly related to the concentration of H2O2 in the range from 0.01 to 50 μM. The limit of detection is as low as 6.5 × 10(-11) M (3σ), and the relative standard deviation is 2. 1 % at 1 μM levels of H2O2 (for n = 11).

Cerium oxide-graphene as the matrix for cholesterol sensor

A simple and sensitive electrogenerated chemiluminescence (ECL) cholesterol biosensor was prepared based on cerium oxide-graphene (CeO(2)-graphene) composites as an efficient matrix. CeO(2)-graphene composites were prepared by depositing CeO(2) onto graphene and were characterized by scanning electron microscopy. The experimental results demonstrated that CeO(2)-graphene could catalyze the ECL of a luminol-H(2)O(2) (hydrogen peroxide) system to amplify the luminol ECL signal greatly. In addition, the use of CeO(2)-graphene provided a better biocompatible microenvironment for the immobilized enzyme, resulting in excellent stability and a long lifetime of the ECL biosensor. The surface assembly process, ECL behaviors, and electrochemistry of the biosensor were investigated in detail. The quantity of cholesterol was in the linear range from 12 μM to 7.2 mM with a detection limit of 4.0 μM (signal/noise = 3). In addition, the biosensor exhibited outstanding reproducibility, long-term stability, and selectivity. Moreover, this cholesterol biosensor offers an alternative analytical method with low cost and high speed.

Enhanced chemiluminescence of the luminol-hydrogen peroxide system by colloidal cupric oxide nanoparticles as peroxidase mimic

As a peroxidase mimic, cupric oxide nanoparticles were found to enhance the chemiluminescence (CL) of luminol-H(2)O(2) system up to 400 folds. The CL spectra and radical scavengers were conducted to investigate the possible CL enhancement mechanism. It was suggested that the enhanced CL could be attributed to the peroxidase-like activity of CuO nanoparticles, which effectively catalyzed the decomposition of hydrogen peroxide into hydroxyl radicals. The effects of the reactant concentrations and some organic compounds were also investigated. The proposed method could be used as a sensitive detection tool for hydrogen peroxide and glucose.

Silver nanoparticle-initiated chemiluminescence reaction of luminol-AgNO3 and its analytical application

Ag(+) has been regarded as an inert chemiluminescent oxidant. In this work, it was found that in the presence of silver nanoparticles (AgNPs), AgNO(3) could react with luminol to produce strong chemiluminescence (CL). The AgNPs with smaller size could initiate stronger CL emission. To investigate the CL mechanism of the AgNPs-luminol-AgNO(3) system, the UV-visible spectra and the CL spectrum of the CL system were obtained. The CL reaction mechanism involving catalysis was proposed. Compared with the reported nanoparticles-luminol-H(2)O(2) CL system, the AgNPs-luminol-AgNO(3) CL system has the advantages of low background and good stability. Moreover, the new CL system was used in immunoassay for IgG.

Synthesis of novel Fe3O4@SiO2@CeO2 microspheres with mesoporous shell for phosphopeptide capturing and labeling

Fe(3)O(4)@SiO(2)@CeO(2) microspheres with magnetic core and mesoporous shell were synthesized, and the multifunctional materials were utilized to capture phosphopeptides and catalyze the dephosphorylation simultaneously, thereby labeling the phosphopeptides for rapid identification.