Shot-to-shot 2D IR spectroscopy at 100 kHz using a Yb laser and custom-designed electronics

The majority of 2D IR spectrometers operate at 1-10 kHz using Ti:Sapphire laser technology. We report a 2D IR spectrometer designed around Yb:KGW laser technology that operates shot-to-shot at 100 kHz. It includes a home-built OPA, a mid-IR pulse shaper, and custom-designed electronics with optional on-chip processing. We report a direct comparison between Yb:KGW and Ti:Sapphire based 2D IR spectrometers. Even though the mid-IR pulse energy is much lower for the Yb:KGW driven system, there is an 8x improvement in signal-to-noise over the 1 kHz Ti:Sapphire driven spectrometer to which it is compared. Experimental data is shown for sub-millimolar concentrations of amides. Advantages and disadvantages of the design are discussed, including thermal background that arises at high repetition rates. This fundamental spectrometer design takes advantage of newly available Yb laser technology in a new way, providing a straightforward means of enhancing sensitivity.

Quantum approaches to vibrational dynamics and spectroscopy: is ease of interpretation sacrificed as rigor increases?

The subject of this Perspective is quantum approaches, beyond the harmonic approximation, to vibrational dynamics and IR spectroscopy.

Teaching vibrational spectra to assign themselves

A new paradigm for assigning vibrational spectra is described. Instead of proceeding from potential to Hamiltonian to eigenvalues/eigenvectors/intensities to spectrum, the new method goes "backwards" directly from spectrum to eigenvectors. The eigenvectors then "assign" the spectrum, in that they identify the basis states that contribute to each eigenvalue. To start, we demonstrate an algorithm that can obtain useful estimates of the eigenvectors connecting a real, symmetric Hamiltonian to its eigenvalues even if the only available information about the Hamiltonian is its diagonal elements. When this algorithm is augmented with information about transition intensities, it can be used to assign a complex vibrational spectrum using only information about (1) eigenvalues (the peak centers of the spectrum) and (2) a harmonic basis set (taken to be the diagonal elements of the Hamiltonian). Examples will be discussed, including application to the vibrationally complex spectral region of the formic acid dimer.

Probe of Alcohol Structures in the Gas and Liquid States Using C⁻H Stretching Raman Spectroscopy

Vibrational spectroscopy is a powerful tool for probing molecular structures and dynamics since it offers a unique fingerprint that allows molecular identification. One of important aspects of applying vibrational spectroscopy is to develop the probes that can characterize the related properties of molecules such as the conformation and intermolecular interaction. Many examples of vibrational probes have appeared in the literature, including the azide group (⁻N₃), amide group (⁻CONH₂), nitrile groups (⁻CN), hydroxyl group (⁻OH), ⁻CH group and so on. Among these probes, the ⁻CH group is an excellent one since it is ubiquitous in organic and biological molecules and the C⁻H stretching vibrational spectrum is extraordinarily sensitive to the local molecular environment. However, one challenge encountered in the application of C⁻H probes arises from the difficulty in the accurate assignment due to spectral congestion in the C⁻H stretching region. In this paper, recent advances in the complete assignment of C⁻H stretching spectra of aliphatic alcohols and the utility of C⁻H vibration as a probe of the conformation and weak intermolecular interaction are outlined. These results fully demonstrated the potential of the ⁻CH chemical group as a molecular probe.

IR Spectra of (HCOOH)2 and (DCOOH)2: Experiment, VSCF/VCI, and Ab Initio Molecular Dynamics Calculations Using Full-Dimensional Potential and Dipole Moment Surfaces

We report quantum VSCF/VCI and ab initio molecular dynamics (AIMD) calculations of the IR spectra of (HCOOH)₂ and (DCOOH)₂, using full-dimensional, ab initio potential energy and dipole moment surfaces (PES and DMS). These surfaces are fits, using permutationally invariant polynomials, to 13 475 ab initio CCSD(T)-F12a electronic energies and MP2 dipole moments. Here "AIMD" means using these ab initio potential and dipole moment surfaces in the MD calculations. The VSCF/VCI calculations use all (24) normal modes for coupling, with a four-mode representation of the potential. The quantum spectra align well with jet-cooled and room-temperature experimental spectra over the spectral range 600-3600 cm^-1. Analyses of the complex O-H and C-H stretch bands are made based on the mixing of the VSCF/VCI basis functions. The comparisons of the AIMD IR spectra with both experimental and VSCF/VCI ones provide tests of the accuracy of the AIMD approach. These indicate good accuracy for simple bands but not for the complex O-H stretch band, which is upshifted from experimental and VSCF/VCI bands by roughly 300 cm^-1. In addition to testing the AIMD approach, the PES, DMS, and VSCF/VCI calculations for formic acid dimer provide opportunities for testing other methods to represent high-dimensional data and other methods that perform postharmonic vibrational calculations.

Quantum and classical IR spectra of (HCOOH)2, (DCOOH)2 and (DCOOD)2 using ab initio potential energy and dipole moment surfaces

Full-dimensional (24 modes) quantum calculation of the IR spectrum of (DCOOD)₂, and comparison with classical MD one.

Line shape analysis of two-dimensional infrared spectra

Ultrafast two-dimensional infrared (2D IR) spectroscopy probes femtosecond to picosecond time scale dynamics ranging from solvation to protein motions. The frequency-frequency correlation function (FFCF) is the quantitative measure of the spectral diffusion that reports those dynamics and, within certain approximations, can be extracted directly from 2D IR line shapes. A variety of methods have been developed to extract the FFCF from 2D IR spectra, which, in principle, should give the same FFCF parameters, but the complexity of real experimental systems will affect the results of these analyses differently. Here, we compare five common analysis methods using both simulated and experimental 2D IR spectra to understand the effects of apodization, anharmonicity, phasing errors, and finite signal-to-noise ratios on the results of each of these analyses. Our results show that although all of the methods can, in principle, yield the FFCF under idealized circumstances, under more realistic experimental conditions they behave quite differently, and we find that the centerline slope analysis yields the best compromise between the effects we test and is most robust to the distortions that they cause.

General strategy for the bioorthogonal incorporation of strongly absorbing, solvation-sensitive infrared probes into proteins

A high-sensitivity metal-carbonyl-based IR probe is described that can be incorporated into proteins or other biomolecules in very high yield via Click chemistry. A two-step strategy is demonstrated. First, a methionine auxotroph is used to incorporate the unnatural amino acid azidohomoalanine at high levels. Second, a tricarbonyl (η(5)-cyclopentadienyl) rhenium(I) probe modified with an alkynyl linkage is coupled via the Click reaction. We demonstrate these steps using the C-terminal domain of the ribosomal protein L9 as a model system. An overall incorporation level of 92% was obtained at residue 109, which is a surface-exposed residue. Incorporation of the probe into a surface site is shown not to perturb the stability or structure of the target protein. Metal carbonyls are known to be sensitive to solvation and protein electrostatics through vibrational lifetimes and frequency shifts. We report that the frequencies and lifetimes of this probe also depend on the isotopic composition of the solvent. Comparison of the lifetimes measured in H2O versus D2O provides a probe of solvent accessibility. The metal carbonyl probe reported here provides an easy and robust method to label very large proteins with an amino-acid-specific tag that is both environmentally sensitive and a very strong absorber.

Molecular mechanics force field-based general map for the solvation effect on amide I probe of peptide in different micro-environments

A general electrostatic potential map based on molecular mechanics force field for modeling the amide I frequency is presented. This map is applied to N-methylacetamide (NMA) and designed to be transferable in different micro-environments. The electrostatic potentials from solvent and peptide side chain are projected on the amide unit of NMA to induce the frequency shift of amide I mode. It is shown that the predicted amide I frequency reproduces the experimental data satisfactorily, especially when NMA in polar solvents. The amide I frequency shift is largely determined by the solvents in aqueous solution while it is dominated by the local structure of peptide in other solvent environments. The map parameters are further applied on NMA-MeOH system and the obtained IR spectra show doublet peak profile with negligible deviation from the experimental data, suggesting the usefulness of this general map for providing information about vibrational parameters of amide motions of peptide in different environments.

A strongly absorbing class of non-natural labels for probing protein electrostatics and solvation with FTIR and 2D IR spectroscopies

A series of non-natural infrared probes is reported that consist of a metal-tricarbonyl modified with a -(CH2)n- linker and cysteine-specific leaving group. They can be site-specifically attached to proteins using mutagenesis and similar protocols for EPR spin labels, which have the same leaving group. We characterize the label's frequencies and lifetimes using 2D IR spectroscopy in solvents of varying dielectric. The frequency range spans 10 cm(-1), and the variation in lifetimes ranges from 6 to 19 ps, indicating that these probes are very sensitive to their environments. Also, we attached probes with -(CH2)-, -(CH2)3-, and -(CH2)4- linkers to ubiquitin at positions 6 and 63 and collected spectra in aqueous buffer. The frequencies and lifetimes were correlated for 3C and 4C linkers, as they were in the solvents, but did not correlate for the 1C linker. We conclude that lifetime measures solvation, whereas frequency reflects the electrostatics of the environment, which in the case of the 1C linker is a measure of the protein electrostatic field. We also labeled V71C α-synuclein in buffer and membrane-bound. Unlike most other infrared labels, this label has extremely strong cross sections and thus can be measured with 2D IR spectroscopy at sub-millimolar concentrations. We expect that these labels will find use in studying the structure and dynamics of membrane-bound, aggregated, and kinetically evolving proteins for which high signal-to-noise at low protein concentrations is imperative.

Ligand binding studied by 2D IR spectroscopy using the azidohomoalanine label

We explore the capability of the azidohomoalanine (Aha) as a vibrational label for 2D IR spectroscopy to study the binding of the target peptide to the PDZ2 domain. The Aha label responds sensitively to its local environment and its peak extinction coefficient of 350-400 M(-1) cm(-1) is high enough to routinely measure it in the low millimolar concentration regime. The central frequency, inhomogeneous width and spectral diffusion times deduced from the 2D IR line shapes of the Aha label at various positions in the peptide sequence is discussed in relationship to the known X-ray structure of the peptide bound to the PDZ2 domain. The results suggest that the Aha label introduces only a small perturbation to the overall structure of the peptide in the binding pocket. Finally, Aha is a methionine analog that can be incorporated also into larger proteins at essentially any position using protein expression. Altogether, Aha thus fulfills the requirements a versatile label should have for studies of protein structure and dynamics by 2D IR spectroscopy.

Monitoring Intramolecular Proton Transfer with Two-Dimensional Infrared Spectroscopy: A Computational Prediction

Proton transfer processes are ubiquitous and play a vital role in a broad range of chemical and biochemical phenomena. The ability of two-dimensional infrared (2D IR) spectroscopy with a carbon-deuterium (C-D) reporter to monitor the kinetics of proton transfer in the model compound malonaldehyde was demonstrated computationally. One of the two carbonyl/enol carbon atoms in malonaldehyde was labeled with a C-D bond. The C-D stretch vibrational frequency provides ∼150 cm(-1) of sensitivity to the two tautomers of malonaldehyde. Mixed quantum mechanics/molecular mechanics simulations employing the self-consistent-charge density functional tight binding (SCC-DFTB) method were used to compute 2D IR line shapes for the C-D stretch of labeled malonaldehyde in aqueous solution. The 2D IR spectra reveal cross peaks from the chemical exchange of the proton. The kinetics for the growth of the cross-peaks (and the decay of the diagonal peaks) precisely match the proton transfer rate observed in the SCC-DFTB simulations.