Species-specific differences and temperature-dependence of Na+/K+-ATPase in freshwater mussels Anodonta anatina and Unio tumidus (Bivalvia: Unionidae)

The predicted global warming of surface waters can be challenging to aquatic ectotherms like freshwater mussels. Especially animals in northern temperate latitudes may face and physiologically acclimate to significant stress from seasonal temperature fluctuations. Na+/K+-ATPase enzyme is one of the key mechanisms that allow mussels to cope with changing water temperatures. This enzyme plays a major role in osmoregulation, energy control, ion balance, metabolite transport and electrical excitability. Here, we experimentally studied the effects of temperature on Na+/K+-ATPase activity of gills in two freshwater mussel species, Anodonta anatina and Unio tumidus. The study animals were acclimated to three ambient temperatures (+4, +14, +24 °C) and Na+/K+-ATPase activity was measured at those temperatures for each acclimation group. Both species had their highest gill Na+/K+-ATPase activity at the highest acclimation temperature. Na+/K+-ATPase activity of gills exhibited species-specific differences, and was higher in A. anatina than U. tumidus in all test groups at all test temperatures. Temperature dependence of Na+/K+-ATPase was confirmed in both species, being highest at temperatures between +4 and + 14 °C when Q10 values in the acclimation groups varied between 5.06 and 6.71. Our results underline the importance of Na+/K+-ATPase of gills for the freshwater mussels in warming waters. Because Na+/K+-ATPase is the driving force behind ciliary motion, our results also suggest that in warming waters A. anatina may be more tolerant at sustaining vigorous ciliary action (associated with elevated respiration rates and filter-feeding) than U. tumidus. Overall, our results indicate great flexibility of the mussel's ecophysiological characteristics as response to changing conditions.

Toward Realistic Models of the Electrocatalytic Oxygen Evolution Reaction

The electrocatalytic oxygen evolution reaction (OER) supplies the protons and electrons needed to transform renewable electricity into chemicals and fuels. However, the OER is kinetically sluggish; it operates at significant rates only when the applied potential far exceeds the reversible voltage. The origin of this overpotential is hidden in a complex mechanism involving multiple electron transfers and chemical bond making/breaking steps. Our desire to improve catalytic performance has then made mechanistic studies of the OER an area of major scientific inquiry, though the complexity of the reaction has made understanding difficult. While historically, mechanistic studies have relied solely on experiment and phenomenological models, over the past twenty years ab initio simulation has been playing an increasingly important role in developing our understanding of the electrocatalytic OER and its reaction mechanisms. In this Review we cover advances in our mechanistic understanding of the OER, organized by increasing complexity in the way through which the OER is modeled. We begin with phenomenological models built using experimental data before reviewing early efforts to incorporate ab initio methods into mechanistic studies. We go on to cover how the assumptions in these early ab initio simulations─no electric field, electrolyte, or explicit kinetics─have been relaxed. Through comparison with experimental literature, we explore the veracity of these different assumptions. We summarize by discussing the most critical open challenges in developing models to understand the mechanisms of the OER.

Four Generations of Volcano Plots for the Oxygen Evolution Reaction: Beyond Proton-Coupled Electron Transfer Steps?

ConspectusDue to its importance for electrolyzers or metal-air batteries for energy conversion or storage, there is huge interest in the development of high-performance materials for the oxygen evolution reaction (OER). Theoretical investigations have aided the search for active material motifs through the construction of volcano plots for the kinetically sluggish OER, which involves the transfer of four proton-electron pairs to form a single oxygen molecule. The theory-driven volcano approach has gained unprecedented popularity in the catalysis and energy communities, largely due to its simplicity, as adsorption free energies can be used to approximate the electrocatalytic activity by heuristic descriptors.In the last two decades, the binding-energy-based volcano method has witnessed a renaissance with special concepts being developed to incorporate missing factors into the analysis. To this end, this Account summarizes and discusses the different generations of volcano plots for the example of the OER. While first-generation methods relied on the assessment of the thermodynamic information for the OER reaction intermediates by means of scaling relations, the second and third generations developed strategies to include overpotential and kinetic effects into the analysis of activity trends. Finally, the fourth generation of volcano approaches allowed the incorporation of various mechanistic pathways into the volcano methodology, thus paving the path toward data- and mechanistic-driven volcano plots in electrocatalysis.Although the concept of volcano plots has been significantly expanded in recent years, further research activities are discussed by challenging one of the main paradigms of the volcano concept. To date, the evaluation of activity trends relies on the assumption of proton-coupled electron transfer steps (CPET), even though there is experimental evidence of sequential proton-electron transfer (SPET) steps. While the computational assessment of SPET for solid-state electrodes is ambitious, it is strongly suggested to comprehend their importance in energy conversion and storage processes, including the OER. This can be achieved by knowledge transfer from homogeneous to heterogeneous electrocatalysis and by focusing on the material class of single-atom catalysts in which the active center is well defined. The derived concept of how to analyze the importance of SPET for mechanistic pathways in the OER over solid-state electrodes could further shape our understanding of the proton-electron transfer steps at electrified solid/liquid interfaces, which is crucial for further progress toward sustainable energy and climate neutrality.

Importance of the Walden Inversion for the Activity Volcano Plot of Oxygen Evolution

Since the birth of the computational hydrogen electrode approach, it is considered that activity trends of electrocatalysts in a homologous series can be quantified by the construction of volcano plots. This method aims to steer materials discovery by the identification of catalysts with an improved reaction kinetics, though evaluated by means of thermodynamic descriptors. The conventional approach for the volcano plot of the oxygen evolution reaction (OER) relies on the assumption of the mononuclear mechanism, comprising the * OH, * O, and * OOH intermediates. In the present manuscript, two new mechanistic pathways, comprising the idea of the Walden inversion in that bond-breaking and bond-making occurs simultaneously, are factored into a potential-dependent OER activity volcano plot. Surprisingly, it turns out that the Walden inversion plays an important role since the activity volcano is governed by mechanistic pathways comprising Walden steps rather than by the traditionally assumed reaction mechanisms under typical OER conditions.

On the mechanistic complexity of oxygen evolution: potential-dependent switching of the mechanism at the volcano apex

The anodic four-electron oxygen evolution reaction (OER) corresponds to the limiting process in acidic or alkaline electrolyzers to produce gaseous hydrogen at the cathode of the device. In the last decade, tremendous efforts have been dedicated to the identification of active OER materials by electronic structure calculations in the density functional theory approximation. Most of these works rely on the assumption that the mononuclear mechanism, comprising the *OH, *O, and *OOH intermediates, is operative under OER conditions, and that a single elementary reaction step (most likely *OOH formation) governs the kinetics. In the present manuscript, six different OER mechanisms are analyzed, and potential-dependent volcano curves are constructed to comprehend the electrocatalytic activity of these pathways in the approximation of the descriptor G_max(U), a potential-dependent activity measure based on the notion of the free-energy span model. While the mononuclear description mainly describes the legs of the volcano plot, corresponding to electrocatalysts with low intrinsic activity, it is demonstrated that the preferred pathway at the volcano apex is a strong function of the applied electrode potential. The observed mechanistic complexity including a switch of the favored pathway with increasing overpotential sets previous investigations aiming at the identification of reaction mechanisms and limiting steps into question since the entire breadth of OER pathways was not accounted for. A prerequisite for future atomic-scale studies on highly active OER catalysts refers to the evaluation of several mechanistic pathways so that neither important mechanistic features are overlooked nor limiting steps are incorrectly determined.

From absolute potentials to a generalized computational standard hydrogen electrode for aqueous and non-aqueous solvents

We describe a simple and efficient procedure to compute a conversion factor for the absolute potential of the standard hydrogen electrode in water to any other solvent. In contrast to earlier methods our procedure only requires the pKa of an arbitrary acid in water and few simple quantum chemical calculations as input. Thus, it is not affected adversely by experimental shortcomings related to measurements in non-aqueous solvents. By combining this conversion factor with the absolute potential in water, the absolute potential in the solvent of interest is obtained. Based on this procedure a new generalized computational standard hydrogen electrode for the computation of electron transfer and proton-coupled electron transfer potentials in non-aqueous solvents and ionic liquids is developed. This enables for the first time the reliable prediction of redox potentials in any solvent. The method is tested through calculation of absolute potentials in 36 solvents. Using the Kamlet-Taft linear solvation energy model we find that the relative absolute potentials consistently increase with decreasing polarisability and decreasing hydrogen bonding ability. For protic solvents good agreement with literature is observed while significant deviations are found for aprotic solvents. The obtained conversion factors are independent of the quantum chemical method, while minor differences are observed between solvation models. This does, however, not affect the global trends.

Method for the accurate prediction of electron transfer potentials using an effective absolute potential

A protocol for the accurate computation of electron transfer (ET) potentials from ab initio and density functional theory (DFT) calculations is described. The method relies on experimental pKa values, which can be measured accurately, to compute a computational setup dependent effective absolute potential. The effective absolute potentials calculated using this protocol display strong variations between the different computational setups and deviate in several cases significantly from the "generally accepted" value of 4.28 V. The most accurate estimate, obtained from CCSD(T)/aug-ccpvqz, indicates an absolute potential of 4.14 V for the normal hydrogen electrode (nhe) in water. Using the effective absolute potential in combination with CCSD(T) and a moderately sized basis, we are able to predict ET potentials accurately for a test set of small organic molecules (σ = 0.13 V). Similarly we find the effective absolute potential method to perform equally good or better for all considered DFT functionals compared to using one of the literature values for the absolute potential. For, M06-2X, which comprises the most accurate DFT method, standard deviation of 0.18 V is obtained. This improved performance is a result of using the most appropriate effective absolute potential for a given method.

Mechanism of Water Oxidation Catalyzed by a Mononuclear Manganese Complex

The design and synthesis of biomimetic Mn complexes to catalyze oxygen evolution is a very appealing goal because water oxidation in nature employs a Mn complex. Recently, the mononuclear Mn complex [LMn^II (H₂ O)₂ ]²⁺ [1, L=Py₂ N(tBu)₂ , Py=pyridyl] was reported to catalyze water oxidation electrochemically at an applied potential of 1.23 V at pH 12.2 in aqueous solution. Density functional calculations were performed to elucidate the mechanism of water oxidation promoted by this catalyst. The calculations showed that 1 can lose two protons and one electron readily to produce [LMn^III (OH)₂ ]⁺ (2), which then undergoes two sequential proton-coupled electron-transfer processes to afford [LMn^V OO]⁺ (4). The O-O bond formation can occur through direct coupling of the two oxido ligands or through nucleophilic attack of water. These two mechanisms have similar barriers of approximately 17 kcal mol^-1 . The further oxidation of 4 to generate [LMn^VI OO]²⁺ (5), which enables O-O bond formation, has a much higher barrier. In addition, ligand degradation by C-H activation has a similar barrier to that for the O-O bond formation, and this explains the relatively low turnover number of this catalyst.

A Robust Molecular Catalyst Generated In Situ for Photo- and Electrochemical Water Oxidation

Water splitting is the key step towards artificial photosystems for solar energy conversion and storage in the form of chemical bonding. The oxidation of water is the bottle-neck of this process that hampers its practical utility; hence, efficient, robust, and easy to make catalytic systems based on cheap and earth-abundant materials are of exceptional importance. Herein, an in situ generated cobalt catalyst, [Co^II (TCA)₂ (H₂ O)₂ ] (TCA=1-mesityl-1,2,3-1H-triazole-4-carboxylate), that efficiently conducts photochemical water oxidation under near-neutral conditions is presented. The catalyst showed high stability under photolytic conditions for more than 3 h of photoirradiation. During electrochemical water oxidation, the catalytic system assembled a catalyst film, which proved not to be cobalt oxide/hydroxide as normally expected, but instead, and for the first time, generated a molecular cobalt complex that incorporated the organic ligand bound to cobalt ions. The catalyst film exhibited a low overpotential for electrocatalytic water oxidation (360 mV) and high oxygen evolution peak current densities of 9 and 2.7 mA cm^-2 on glassy carbon and indium-doped tin oxide electrodes, respectively, at only 1.49 and 1.39 V (versus a normal hydrogen electrode), respectively, under neutral conditions. This finding, exemplified on the in situ generated cobalt complex, might be applicable to other molecular systems and suggests that the formation of a catalytic film in electrochemical water oxidation experiments is not always an indication of catalyst decomposition and the formation of nanoparticles.

A DFT/B3LYP study of the mechanisms of the O2 formation reaction catalyzed by the [(terpy)(H2O)MnIII(O)2MnIV(OH2)(terpy)](NO3)3 complex: A paradigm for photosystem II

We present a theoretical study of the reaction pathway for dioxygen molecular formation catalyzed by the [(terpy)(H₂O)Mn^III(O)₂Mn^IV(OH₂) (terpy)](NO₃)₃ (terpy=2,2':6',2″-terpyridine) complex based on DFT-B3LYP calculations. In the initial state of the reaction, a partial oxido radical (0.44 spins) is formed ligated to Mn. This radical is involved in a nucleophylic attack by bulk water in the OO bond reaction formation step, in which the oxido fractional unpaired electron is delocalized toward the outermost Mn of the μ-oxo bridge, instead of the ligated Mn center. The reaction then follows with a series of proton-coupled electron transfer steps, in which the oxidation state, as well as the bond strength of the OO moiety increase, while the OOMn(1) bond gets weaker until O₂ is released. In this model, basic acetate ions from the buffer solution capture protons in the proton-transfer steps. In each step there is reduction of the OOMn(1) binding strength, with concomitant increase of the OO bond strength, which culminates with the release of O₂ in the last step. This last step is entropy driven, while formation of hydroperoxide and superoxide moieties is enthalpy driven. According with experiments, the rate-limiting step is the double oxidation of Mn(IV,III) or peroxymonosulfate binding, which occur prior to the OO bond formation step. This supports our findings that the barriers of all intermediate steps are below the experimental barrier of 19-21kcal/mol. The implications of these findings for understanding photosynthetic water-splitting catalysis are also discussed.

Ab initio electronic structure study of a model water splitting dimer complex

A model manganese dimer electrocatalyst bridged by μ-OH ligands is used to investigate changes in spin states that may occur during water oxidation. We have employed restricted open-shell Hartree-Fock (ROHF), second-order Møller-Plesset perturbation theory (MP2), complete active space self-consistent field (CASSCF), and multireference second-order Møller-Plesset perturbation theory (MRMP2) calculations to investigate this system. Multiconfigurational methods like CASSCF and MRMP2 are appropriate methods to study these systems with antiferromagnetically-coupled electrons. Orbital occupations and distributions have been closely analyzed to understand the electronic details and contributions to the water splitting from manganese and oxygen atoms. The presence of Mn(IV)O˙ radical moieties has been observed in this catalytic pathway. Multiple nearly degenerate excited states were found close to the ground state in all structures. This suggests competing potential energy landscapes near the ground state may influence the reactivity of manganese complexes such as the dimers studied in this work.

Revised Oxygen Evolution Reaction Activity Trends for First-Row Transition-Metal (Oxy)hydroxides in Alkaline Media

First-row transition-metal oxides and (oxy)hydroxides catalyze the oxygen evolution reaction (OER) in alkaline media. Understanding the intrinsic catalytic activity provides insight into improved catalyst design. Experimental and computationally predicted activity trends, however, have varied substantially. Here we describe a new OER activity trend for nominally oxyhydroxide thin films of Ni(Fe)O(x)H(y) > Co(Fe)O(x)H(y) > FeO(x)H(y)-AuO(x) > FeO(x)H(y) > CoO(x)H(y) > NiO(x)H(y) > MnO(x)H(y). This intrinsic trend has been previously obscured by electrolyte impurities, potential-dependent electrical conductivity, and difficulty in correcting for surface-area or mass-loading differences. A quartz-crystal microbalance was used to monitor mass in situ and X-ray photoelectron spectroscopy to measure composition and impurity levels. These new results provide a basis for comparison to theory and help guide the design of improved catalyst systems.

The role of nano-sized manganese oxides in the oxygen-evolution reactions by manganese complexes: towards a complete picture

Eighteen Mn complexes with N-donor and carboxylate ligands have been synthesized and characterized. Three Mn complexes among them are new and are reported for the first time. The reactions of oxygen evolution in the presence of oxone (2KHSO5·KHSO4·K2SO4) and cerium(iv) ammonium nitrate catalyzed by these complexes are studied and characterized by UV-visible spectroscopy, X-ray diffraction spectrometry, dynamic light scattering, Fourier transform infrared spectroscopy, electron paramagnetic resonance spectroscopy, transmission electron microscopy, scanning electron microscopy, membrane-inlet mass spectrometry and electrochemistry. Some of these complexes evolve oxygen in the presence of oxone as a primary oxidant. CO2 and MnO4(-) are other products of these reactions. Based on spectroscopic studies, the true catalysts for oxygen evolution in these reactions are different. We proposed that for the oxygen evolution reactions in the presence of oxone, the true catalysts are both high valent Mn complexes and Mn oxides, but for the reactions in the presence of cerium(iv) ammonium nitrate, the active catalyst is most probably a Mn oxide.

Photosystem II like water oxidation mechanism in a bioinspired tetranuclear manganese complex

The synthesis of Mn-based catalysts to mimic the structural and catalytic properties of the oxygen-evolving complex in photosystem II is a long-standing goal for researchers. An interesting result in this field came with the synthesis of a Mn complex that enables water oxidation driven by the mild single-electron oxidant [Ru(bpy)3](3+). On the basis of hybrid density functional calculations, we herein propose a water oxidation mechanism for this bioinspired Mn catalyst, where the crucial O-O bond formation proceeds from the formal Mn4(IV,IV,IV,V) state by direct coupling of a Mn(IV)-bound terminal oxyl radical and a di-Mn bridging oxo group, a mechanism quite similar to the presently leading suggestion for the natural system. Of importance here is that the designed ligand is shown to be redox-active and can therefore store redox equivalents during the catalytic transitions, thereby alleviating the redox processes at the Mn centers.

Theoretical investigation of water oxidation processes on small Mn(x)Ti(2-x)O4 (x = 0-2) complexes

Understanding the water oxidation process on small metal oxide complexes is fundamental for developing photocatalysts for solar fuel production. Titanium oxide and manganese oxide complexes have high potential as components of a cheap, nontoxic, and stable photocatalyst. In this theoretical work, the water oxidation process on Mn(x)Ti(2-x)O4 (x = 0-2) clusters is investigated at the BP86 level of theory using two water molecules and fully saturated systems. In the oxidation cycle using two water molecules, Mn reduces the reaction energy; however, Mn does not reduce the reaction energy on the fully saturated system. When two water molecules are used, the highest reaction energy in the water oxidation cycle is lower than 3 eV, but the highest reaction energy is higher than 3 eV on fully saturated systems except for the pure titanium oxide complex which has a highest reaction energy of 2.56 eV. Dehydrogenation processes in the water oxidation cycle require higher energy than the O-O formation or water adsorption processes. The overall dehydrogenation energy is usually smaller on complexes including at least one Mn atom and it is smallest on the Mn2O4 complex that has two water molecules. Considering the highest reaction energy in the overall water oxidation cycle, water oxidation at the manganese atom of MnTiO4 hydrated with two water molecules is the most favorable in energy.

Computational electrochemistry: prediction of liquid-phase reduction potentials

This article reviews recent developments and applications in the area of computational electrochemistry. Our focus is on predicting the reduction potentials of electron transfer and other electrochemical reactions and half-reactions in both aqueous and nonaqueous solutions. Topics covered include various computational protocols that combine quantum mechanical electronic structure methods (such as density functional theory) with implicit-solvent models, explicit-solvent protocols that employ Monte Carlo or molecular dynamics simulations (for example, Car-Parrinello molecular dynamics using the grand canonical ensemble formalism), and the Marcus theory of electronic charge transfer. We also review computational approaches based on empirical relationships between molecular and electronic structure and electron transfer reactivity. The scope of the implicit-solvent protocols is emphasized, and the present status of the theory and future directions are outlined.

Redox and electrochemical water splitting catalytic properties of hydrated metal oxide modified electrodes

This paper presents a review of the redox and electrocatalytic properties of transition metal oxide electrodes, paying particular attention to the oxygen evolution reaction. Metal oxide materials may be prepared using a variety of methods, resulting in a diverse range of redox and electrocatalytic properties. Here we describe the most common synthetic routes and the important factors relevant to their preparation. The redox and electrocatalytic properties of the resulting oxide layers are ascribed to the presence of extended networks of hydrated surface bound oxymetal complexes termed surfaquo groups. This interpretation presents a possible unifying concept in water oxidation catalysis - bridging the fields of heterogeneous electrocatalysis and homogeneous molecular catalysis.