Decreasing the Bond Order between Vanadium and Oxo Ligand to Form 3d Schrock Carbynes

Preserving vanadium in a high oxidation state during chemical transformations can be challenging due to the oxidizing nature of V(+5) species. Oxo and similar isoelectronic ligands have been utilized to stabilize V(+5) by extensive π-donation. However, decreasing the bond order between V and the oxo ligand often results in a reduction of the metal center. Herein, we report a unique transformation involving anionic V(+5) alkylidene that converts a V(+5) oxo complex to a V(+5) alkylidyne in three steps without altering the oxidation state of the metal center. This method has been used to obtain rare 3d Schrock carbynes, which provide easy and scalable access to V(+5) alkylidynes.

Experimental and Theoretical Investigation of the Mechanism of the Reduction of O2 from Air to O22- by VIVO2+-N,N,N-Amidate Compounds and Their Potential Use in Fuel Cells

The two-electron reductive activation of O2 to O22- is of particular interest to the scientific community mainly due to the use of peroxides as green oxidants and in powerful fuel cells. Despite of the great importance of vanadium(IV) species to activate the two-electron reductive activation of O2, the mechanism is still unclear. Reaction of VIVO2+ species with the tridentate-planar N,N,N-carboxamide (ΗL) ligands in solution (CH3OH:H2O) under atmospheric O2, at room temperature, resulted in the quick formation of [VV(═O)(η2-O2)(κ3-L)(H2O)] and cis-[VV(═O)2(κ3-L)] compounds. Oxidation of the VIVO2+ complexes with the sterically hindered tridentate-planar N,N,N-carboxamide ligands by atmospheric O2 gave only cis-[VV(═O)2(κ3-L)] compounds. The mechanism of formation of [VV(═O)(η2-O2)(κ3-L)(H2O)] (I) and cis-[VV(═O)2(κ3-L)] (II) complexes vs time, from the interaction of [VIV(═O)(κ3-L)(Η2Ο)2]+ with atmospheric O2, was investigated with 51V, 1H NMR, UV-vis, cw-X-band EPR, and 18O2 labeling IR and resonance Raman spectroscopies revealing the formation of a stable intermediate (Id). EPR, MS, and theoretical calculations of the mechanism of the formation of I and II revealed a pathway, through a binuclear [VIV(═O)(κ3-L)(H2O)(η1,η1-O2)VIV(═O)(κ3-L)(H2O)]2+ intermediate. The results from cw-EPR, 1H NMR spectroscopies, cyclic voltammetry, and the reactivity of the complexes [VIV(═O)(κ3-L)(Η2Ο)2]+ toward O2 reduction fit better to an intermediate with a binuclear nature. Dynamic experiments in combination with computational calculations were undertaken to fully elucidate the mechanism of the O2 reduction to O22- by [VIV(═O)(κ3-L)(Η2Ο)2]+. The galvanic cell {Zn|VIII,VII||Id, [VIVO(κ3-L)(H2O)2]+|O2|C(s)} was manufactured, demonstrating the important applicability of this new chemistry to Zn|H2O2 fuel cells technology generating H2O2 in situ from the atmospheric O2.

Implementing vanadium peroxides as direct air carbon capture materials

Direct air capture (DAC) removal of anthropogenic CO2 from the atmosphere is imperative to slow the catastrophic effects of global climate change. Numerous materials are being investigated, including various alkaline inorganic metal oxides that form carbonates via DAC. Here we explore metastable early d0 transition metal peroxide molecules that undergo stabilization via multiple routes, including DAC. Specifically here, we describe via experiment and computation the mechanistic conversion of A3V(O2)4 (tetraperoxovanadate, A = K, Rb, Cs) to first a monocarbonate VO(O2)2(CO3)3-, and ultimately HKCO3 plus KVO4. Single crystal X-ray structures of rubidium and cesium tetraperoxovanadate are reported here for the first time, likely prior-challenged by instability. Infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), 51V solid state NMR (nuclear magnetic resonance), tandem thermogravimetry-mass spectrometry (TGA-MS) along with calculations (DFT, density functional theory) all converge on mechanisms of CO2 capture and release that involve the vanadium centre, despite the end product of a 300 days study being bicarbonate and metavanadate. Electron Paramagnetic Resonance (EPR) Spectroscopy along with a wet chemical assay and computational studies evidence the presense of ∼5% adventitous superoxide, likely formed by peroxide reduction of vanadium, which also stabilizes via the reaction with CO2. The alkalis have a profound effect on the stability of the peroxovanadate compounds, stability trending K > Rb > Cs. While this translates to more rapid CO2 capture with heavier alkalis, it does not necessarily lead to capture of more CO2. All compounds capture approximately two equivalents CO2 per vanadium centre. We cannot yet explain the reactivity trend of the alkali peroxovanadates, because any change in speciation of the alkalis from reactions to product is not quantifiable. This study sets the stage for understanding and implementing transition metal peroxide species, including peroxide-functionalized metal oxides, for DAC.

Enhancement of Diarylamine Antioxidant Activity by Molybdenum Dithiocarbamates

Molybdenum dithiocarbamates (MDTCs) are indispensable lubricant additives. Although their role as antiwear agents is well established, they have also been attributed antioxidant properties that are not understood. MDTCs do not inhibit autoxidation, but they markedly enhance the capacity of diphenylamines (DPAs)─ubiquitous radical-trapping antioxidants (RTAs)─to do so. We find this synergy to be evident not only at elevated temperatures (160 °C in n-hexadecane) but also at moderate temperatures, where autoxidations can be continuously monitored and kinetics more easily interpreted (100 °C in squalane). Interestingly, the synergy disappeared in an unsaturated hydrocarbon (n-hexadec-1-ene), where the RTA activity of the DPA is known to result from the diarylnitroxide derived therefrom. Autoxidations of squalane carried out in the presence of the diarylnitroxide─wherein it is a poor inhibitor─were much better inhibited in the presence of MDTC, suggesting that it converts the nitroxide to (a) more competent RTA(s). Indeed, preparative experiments revealed two species: DPA and a DPA dimer into which a single oxygen atom had been incorporated. This conversion is accelerated by the oxidation of MDTC to a dioxo molybdenum species. A mechanism is proposed to account for these observations, and the implications of our findings and their interpretation are discussed.

In situ generation of H2O2 using CaO2 as peroxide storage depot for haloperoxidase mimicry with surface-tailored Bi-doped mesoporous CeO2 nanozymes

Designing the size, morphology and interfacial charge of catalyst particles at the nanometer scale can enhance their performance. We demonstrate this with nanoceria which is a functional mimic of haloperoxidases, a group of enzymes that halogenates organic substrates in the presence of hydrogen peroxide. These reactions in aqueous solution require the presence of H₂O₂. We demonstrate in situ generation of H₂O₂ from a CaO₂ reservoir in polyether sulfone (PES) and poly(vinylidene fluoride) (PVDF) polymer beads, which circumvents the external addition of H₂O₂ and expands the scope of applications for haloperoxidase reactions. The catalytic activity of nanoceria was enhanced significantly by Bi³⁺ substitution. Bi-doped mesoporous ceria nanoparticles with tunable surface properties were prepared by changing the reaction time. Increasing reaction time increases the surface area S_BET of the mesoporous Bi_0.2Ce_0.8O_1.9 nanoparticles and the Ce³⁺/Ce⁴⁺ ratio, which is associated with the ζ-potential. In this way, the catalytic activity of nanoceria could be tuned in a straightforward manner. H₂O₂ required for the reaction was released steadily over a long period of time from a CaO₂ storage depot incorporated in polyether sulfone (PES) and poly(vinylidene fluoride) (PVDF) beads together with Bi_0.2Ce_0.8O_1.9 particles, which may be used as precision fillers and templates for biological applications. The spheres are prepared as a dry powder with no surface functionalization or coatings. They are inert, chemically stable, and safe for handling. The feasibility of this approach was demonstrated using a haloperoxidase assay.

Tetra-n-butylammonium decatungstate supported on Fe3O4 nanoparticles: a novel nanocatalyst for green synthesis of nitroso compounds

The Fe3O4/TBADT composite catalyst (M-DT) can efficiently oxidize aromatic amine compounds selectively into nitroso compounds in the presence of H2O2. The high efficiency is due to the strong interaction between Fe3O4 and TBADT.

Communication Breakdown: Into the Molecular Mechanism of Biofilm Inhibition by CeO2 Nanocrystal Enzyme Mimics and How It Can Be Exploited

Bacterial biofilm formation is a huge problem in industry and medicine. Therefore, the discovery of anti-biofilm agents may hold great promise. Biofilm formation is usually a consequence of bacterial cell-cell communication, a process called quorum sensing (QS). CeO₂ nanocrystals (NCs) have been established as haloperoxidase (HPO) mimics and ecologically beneficial biofilm inhibitors. They were suggested to interfere with QS, a mechanism termed quorum quenching (QQ), but their molecular mechanism remained elusive. We show that CeO₂ NCs are effective QQ agents, inactivating QS signals by bromination. Catalytic bromination of 3-oxo-C₁₂-AHL a QS signaling compound used by Pseudomonas aeruginosa, was detected in the presence of CeO₂ NCs, bromide ions, and hydrogen peroxide. Brominated acyl-homoserine lactones (AHLs) no longer act as QS signals but were not detected in the bacterial cultures. Externally added brominated AHLs also disappeared in P. aeruginosa cultures within minutes of their addition, indicating that they are rapidly degraded by the bacteria. Moreover, we detected the catalytic bromination of 2-heptyl-1-hydroxyquinolin-4(1H)-one (HQNO), a multifunctional non-AHL QS signal from P. aeruginosa with antibacterial and algicidal properties controlling the expression of many virulence genes. Brominated HQNO was not degraded by the bacteria in vivo. The repression of the Pseudomonas quinolone signal (PQS) production and biofilm formation in P. aeruginosa through the catalytic formation of Br-HQNO on surfaces with coatings containing CeO₂ enzyme mimics validates the non-toxic strategy for the development of anti-infectives.

Peroxide-Selective Reduction of O2 at Redox-Inactive Rare-Earth(III) Triflates Generates an Ambiphilic Peroxide

Metal peroxides are key species involved in a range of critical biological and synthetic processes. Rare-earth (group III and the lanthanides; Sc, Y, La-Lu) peroxides have been implicated as reactive intermediates in catalysis; however, reactivity studies of isolated, structurally characterized rare-earth peroxides have been limited. Herein, we report the peroxide-selective (93-99% O₂^2-) reduction of dioxygen (O₂) at redox-inactive rare-earth triflates in methanol using a mild metallocene reductant, decamethylferrocene (Fc*). The first molecular praseodymium peroxide ([Pr^III₂(O₂^2-)(18C6)₂(EG)₂][OTf]₄; 18C6 = 18-crown-6, EG = ethylene glycol, ^-OTf = ^-O₃SCF₃; 2-Pr) was isolated and characterized by single-crystal X-ray diffraction, Raman spectroscopy, and NMR spectroscopy. 2-Pr displays high thermal stability (120 °C, 50 mTorr), is protonated by mild organic acids [pK_a1(MeOH) = 5.09 ± 0.23], and engages in electrophilic (e.g., oxygen atom transfer) and nucleophilic (e.g., phosphate-ester cleavage) reactivity. Our mechanistic studies reveal that the rate of oxygen reduction is dictated by metal-ion accessibility, rather than Lewis acidity, and suggest new opportunities for differentiated reactivity of redox-inactive metal ions by leveraging weak metal-ligand binding events preceding electron transfer.

New Organic-Inorganic Hybrid Compounds Based on Sodium Peroxidomolybdates (VI) and Derivatives of Pyridine Acids: Structure Determination and Catalytic Properties

Two organic-inorganic hybrids based on sodium peroxidomolybdates(VI) and 3,5-dicarboxylic pyridine acid (Na-35dcpa) or N-oxide isonicotinic acid (Na-isoO) have been synthesized and characterized. All compounds contain inorganic parts: a pentagonal bipyramid with molybdenum center, and an organic part containing 3,5-dicarboxylic pyridine acid or N-oxide isonicotinic acid moieties. The type of organic part used in the synthesis influences the crystal structure of obtained compounds. This aspect can be interesting for crystal engineering. Crystal structures were determined using powder X-ray diffraction or single crystal diffraction for compounds Na-35dcpa and Na-isoO, respectively. Elemental analysis was used to check the purity of the obtained compounds, while X-ray Powder Diffraction (XRPD) vs. temp. was applied to verify their stability. Moreover, all the compounds were examined by Infrared (IR) spectroscopy. Their catalytic activity was tested in the Baeyer-Villiger (BV) oxidation of cyclohexanone to ε-caprolactone in the oxygen-aldehyde system. The highest catalytic activity in the BV oxidation was observed for Na-35dcpa. The compounds were also tested for biological activity on human normal cells (fibroblasts) and colon cancer cell lines (HT-29, LoVo, SW 620, HCT 116). All compounds were cytotoxic against tumor cells with metastatic characteristics, which makes them interesting and promising candidates for further investigations of specific anticancer mechanisms.

Defect-controlled halogenating properties of lanthanide-doped ceria nanozymes

Marine organisms combat bacterial colonization by biohalogenation of signaling compounds that interfere with bacterial communication. These reactions are catalyzed by haloperoxidase enzymes, whose activity can be emulated by nanoceria using milli- and micromolar concentrations of Br^- and H₂O₂. We show that the haloperoxidase-like activity of nanoceria can greatly be enhanced by Ln substitution in Ce_1-xLn_xO_2-x/2. Non-agglomerated nanosized Ce_1-xLn_xO_2-x/2 (Ln = Pr, Tb, particle size < 10 nm) was prepared mechanochemically from CeCl₃ and Na₂CO₃ followed by short calcination. Lanthanide metals could be incorporated into the CeO₂ host without solubility limit, as shown for Tb. The distribution of the Ln³⁺ defect sites in the CeO₂ host structure was analyzed by electron spin resonance spectroscopy. Ce³⁺ and superoxide O₂^- species are present at surface sites. Their formation is promoted by increasing dopant concentration. Ce_1-xLn_xO_2-x/2 was prepared in copious amounts by ball-milling. This energy-saving and residue-free method can be upscaled to industrial scale. The surface defect chemistry of Ce_1-xLn_xO_2-x/2 was unravelled by vibrational spectroscopy. It is associated with the mechanochemical preparation and leads to enhanced catalytic activity. Although Ce_0.9Pr_0.1O_1.95 had a lower BET surface area than pure CeO₂, its catalytic activity, calibrated by oxidative bromination of phenol red, was much higher because the ζ-potential increased from 15 mV (for CeO₂) to 30 mV (for Ce_0.9Pr_0.1O_1.95). This facilitates adsorption of Br^- in aqueous conditions and explains the high catalytic activity of the Ln-substituted CeO₂. Ce_1-xLn_xO_2-x/2 is an effective and "green" nanoparticle haloperoxidase mimic for antifouling applications, as no chemicals other than the ubiquitous Br^- and H₂O₂ (generated in daylight) are required, and only natural metabolites are released into the environment.

High-throughput synthesis of CeO2 nanoparticles for transparent nanocomposites repelling Pseudomonas aeruginosa biofilms

Preventing bacteria from adhering to material surfaces is an important technical problem and a major cause of infection. One of nature's defense strategies against bacterial colonization is based on the biohalogenation of signal substances that interfere with bacterial communication. Biohalogenation is catalyzed by haloperoxidases, a class of metal-dependent enzymes whose activity can be mimicked by ceria nanoparticles. Transparent CeO₂/polycarbonate surfaces that prevent adhesion, proliferation, and spread of Pseudomonas aeruginosa PA14 were manufactured. Large amounts of monodisperse CeO₂ nanoparticles were synthesized in segmented flow using a high-throughput microfluidic benchtop system using water/benzyl alcohol mixtures and oleylamine as capping agent. This reduced the reaction time for nanoceria by more than one order of magnitude compared to conventional batch methods. Ceria nanoparticles prepared by segmented flow showed high catalytic activity in halogenation reactions, which makes them highly efficient functional mimics of haloperoxidase enzymes. Haloperoxidases are used in nature by macroalgae to prevent formation of biofilms via halogenation of signaling compounds that interfere with bacterial cell-cell communication ("quorum sensing"). CeO₂/polycarbonate nanocomposites were prepared by dip-coating plasma-treated polycarbonate panels in CeO₂ dispersions. These showed a reduction in bacterial biofilm formation of up to 85% using P. aeruginosa PA14 as model organism. Besides biofilm formation, also the production of the virulence factor pyocyanin in is under control of the entire quorum sensing systems P. aeruginosa. CeO₂/PC showed a decrease of up to 55% in pyocyanin production, whereas no effect on bacterial growth in liquid culture was observed. This indicates that CeO₂ nanoparticles affect quorum sensing and inhibit biofilm formation in a non-biocidal manner.

Transparent polycarbonate coated with CeO2 nanozymes repel Pseudomonas aeruginosa PA14 biofilms

Highly transparent CeO₂/polycarbonate surfaces were fabricated that prevent adhesion, proliferation, and the spread of bacteria. CeO₂ nanoparticles with diameters of 10-15 nm and lengths of 100-200 nm for this application were prepared by oxidizing aqueous dispersions of Ce(OH)₃ with H₂O₂ in the presence of nitrilotriacetic acid (NTA) as the capping agent. The surface-functionalized water-dispersible CeO₂ nanorods showed high catalytic activity in the halogenation reactions, which makes them highly efficient functional mimics of haloperoxidases. These enzymes are used in nature to prevent the formation of biofilms through the halogenation of signaling compounds that interfere with bacterial cell-cell communication ("quorum sensing"). Bacteria-repellent CeO₂/polycarbonate plates were prepared by dip-coating plasma-treated polycarbonate plates in aqueous CeO₂ particle dispersions. The quasi-enzymatic activity of the CeO₂ coating was demonstrated using phenol red enzyme assays. The monolayer coating of CeO₂ nanorods (1.6 μg cm^-2) and the bacteria repellent properties were demonstrated by atomic force microscopy, biofilm assays, and fluorescence measurements. The engineered polymer surfaces have the ability to repel biofilms as green antimicrobials on plastics, where H₂O₂ is present in humid environments such as automotive parts, greenhouses, or plastic containers for rainwater.

Sustainable Highly Selective Toluene Oxidation to Benzaldehyde

Thanks to the well-recognized role of benzaldehyde in industry, nowadays the research of new and sustainable approaches to selectively synthesize such an interesting product is receiving great attention from the chemists’ community. In this paper, a V-based catalytic biphasic system is adopted to perform toluene oxidation to benzaldehyde. Importantly, to pursue sustainability, organic solvents have been avoided, so toluene is used as substrate and co-solvent, together with water. Also, the use of hydrophobic ionic liquids has been explored. To perform oxidation, NH4VO3 catalyst, H2O2, and a safe and inexpensive co-catalyst are used. Among the tested co-catalysts, KF and O2 were found to be the best choice, to guarantee good yields, in mild reaction conditions. In fact, with such a sustainable method, up to 30% of benzaldehyde can be obtained at 60 °C and, more interestingly, the oxidative system can be recharged, raising-up the yield. The entire process results highly selective, since no traces of benzyl alcohol or benzoic acid are detected. Hence, it constitutes a very appealing synthetic route, even suitable to be easily scaled-up at an industrial level.

Stereochemistry of Vanadium Peroxido Complexes: The Case of the Quinoline-2-carboxylato Ligand

A new mononuclear vanadium peroxido complex [VO(O₂)(phen)(quin)]·H₂O (1) exhibiting an unprecedented isomerism of its ligands was isolated from a two-component water-acetonitrile solvent system. DFT computations aimed at inspecting the stability of all possible isomers of complexes [VO(O₂)(L¹)(L²)], where L¹ and L² are NN+ON, OO+ON, NN+OO, and ON+ON donor atom set ligands, suggested that every complex characterized so far was the one preferred thermodynamically. However, the particular case of complex [VO(O₂)(phen)(quin)] reported herein poses a notable exception to this rule, as this complex yielded single crystals of the isomer with total energy above the anticipated isomer, although both of these isomers could be observed concurrently in solution and also in the solid state. ⁵¹V NMR spectroscopy suggested these isomers to be present both in the crystallization solution and in the acetonitrile solution of 1. The coexistence of two isomers is a consequence of their small computed energy difference of 2.68 kJ mol^-1, while the preferential crystallization favoring the unexpected isomer is likely to be triggered by solvent effects and the effects of different solubility and/or crystal packing. The coordination geometry of the unusual isomer also manifests itself in FT-IR and Raman spectra, which were corroborated with DFT computations targeted at band assignments.

Biomimetic Vanadate and Molybdate Systems for Oxidative Upgrading of Iono- and Organosolv Hard- and Softwood Lignins

Recently reported acetosolv soft- and hardwood lignins as well as ionosolv soft- and hardwood lignins were transformed into monomeric aromatic compounds using either a vanadate or a molybdate-based catalyst system. Monomers were generated with remarkable, catalyst-dependent selectivity and high depolymerisation yields via oxidative exo- and endo-depolymerisation processes. Using the vanadate–hydrogen peroxide system on acetosolv pine lignin, vanillin and isovanillin were produced as main products with depolymerisation yields of 31%. Using the molybdate system on acetosolv and ionosolv lignin, vanillic acid was the practically exclusive product, with depolymerisation yields of up to 72%. Similar selectivities, albeit with lower depolymerisation yields of around 50% under standardised conditions, were obtained for eucalyptus acetosolv lignin, producing vanillin and syringaldehyde or vanillic acid as products, by using the vanadate- or the molybdate-based systems respectively.

Catalyst Development for the Synthesis of Ozonides and Tetraoxanes Under Heterogeneous Conditions: Disclosure of an Unprecedented Class of Fungicides for Agricultural Application

The catalyst H_3+x PMo_12-x ⁺⁶ Mo_x ⁺⁵ O₄₀ supported on SiO₂ was developed for peroxidation of 1,3- and 1,5-diketones with hydrogen peroxide with the formation of bridged 1,2,4,5-tetraoxanes and bridged 1,2,4-trioxolanes (ozonides) with high yield based on isolated products (up to 86 and 90 %, respectively) under heterogeneous conditions. Synthesis of peroxides under heterogeneous conditions is a rare process and represents a challenge for this field of chemistry, because peroxides tend to decompose on the surface of a catalyst . A new class of antifungal agents for crop protection, that is, cyclic peroxides: bridged 1,2,4,5-tetraoxanes and bridged ozonides, was discovered. Some ozonides and tetraoxanes exhibit a very high antifungal activity and are superior to commercial fungicides, such as Triadimefon and Kresoxim-methyl. It is important to note that none of the fungicides used in agricultural chemistry contains a peroxide fragment.

New VIVO-complexes for oxidative desulfurization of refractory sulfur compounds in fuel: synthesis, structure, reactivity trend and mechanistic studies

A series of 5-coordinate oxidovanadium(iv) complexes based on 2-(2'-hydroxyphenyl)imidazole (HPIMH), with substituent groups of different electronegativities on the phenolic para position (HPIMX; X = -H, -Br, -OMe and -NO2), were synthesized and characterized. Three of these complexes were characterized by single crystal X-ray diffraction, [VIVO(PIMH)2], [VIVO(PIMBr)2] and [VIVO(PIMNO2)2], as well as a dioxidovanadium(v) compound ([VVO2(PIMH)(PIMH2)]). The complexes were tested for their catalytic activities in the oxidation of dibenzothiophene (DBT), the major refractory organosulfur compound found in fuel. The nitro substituted compound [VIVO(PIMNO2)2] had the highest catalytic oxidation activity followed by: [VIVO(PIMH)2] > [VIVO(PIMBr)2] > [VIVO(PIMMeO)2]. The decrease in activity is attributed to the different electronegativities of the substituent groups, which influence the electron density on the metal center, the V[double bond, length as m-dash]O bond distances and infrared stretching bands. Geometry index (τ) values calculated from single crystal X-ray diffraction (SC-XRD) data and DFT studies provided further insights on the trend in activity observed. SC-XRD, EPR, 51V NMR and UV-Vis spectroscopies, and DFT studies were instrumental in studying the mechanism of the catalyzed reaction and proposal of intermediate species. Both radical and non-radical pathways are plausible for the catalytic oxidation and participation of reactive oxygen species in both pathways is also postulated.

New thiosemicarbazide and dithiocarbazate based oxidovanadium(iv) and dioxidovanadium(v) complexes. Reactivity and catalytic potential

The new thiosemicarbazide and dithiocarbazate based vanadium complexes show remarkable catalytic potential for oxidation of alcohols and simple arenes.

HCl and O2 co-activated bis(8-quinolinolato) oxovanadium(iv) complexes as efficient photoactive species for visible light-driven oxidation of cyclohexane to KA oil

Photoactive species (PA) originating from HCl and O₂ co-activated bis(8-quinolinolato) oxovanadium(iv) can effectively modulate the photocatalytic oxidation of cyclohexane.

In vitrocytotoxicity and catalytic evaluation of dioxidovanadium(v) complexes in an azohydrazone ligand environment

Synthesis, characterization,in vitrocytotoxicity and catalytic potential of the dioxidovanadium(v) complexes of azohydrazones.

Catalytic Applications of Vanadium: A Mechanistic Perspective

The chemistry of vanadium has seen remarkable activity in the past 50 years. In the present review, reactions catalyzed by homogeneous and supported vanadium complexes from 2008 to 2018 are summarized and discussed. Particular attention is given to mechanistic and kinetics studies of vanadium-catalyzed reactions including oxidations of alkanes, alkenes, arenes, alcohols, aldehydes, ketones, and sulfur species, as well as oxidative C-C and C-O bond cleavage, carbon-carbon bond formation, deoxydehydration, haloperoxidase, cyanation, hydrogenation, dehydrogenation, ring-opening metathesis polymerization, and oxo/imido heterometathesis. Additionally, insights into heterogeneous vanadium catalysis are provided when parallels can be drawn from the homogeneous literature.

Visible light assisted photocatalytic degradation of crystal violet dye and electrochemical detection of ascorbic acid using a BiVO4/FeVO4 heterojunction composite

A highly pure BiVO₄/FeVO₄ heterojunction nanocomposite photocatalyst was synthesized by a facile hydrothermal method. The simple and economical manufacturing process allows easier industrial scale-up and the results contribute to the design of more effective photocatalysts.

Synthesis of new photosensitive H2BBQ2+[ZnCl4]2−/[(ZnCl)2(μ-BBH)] complexes, through selective oxidation of H2O to H2O2

A two-electron photosensitive H₂O to H₂O₂ oxidizer, H₂BBQ²⁺[ZnCl₄]²⁻/[(ZnCl)₂(μ-BBH)], has been synthesized. An aqueous {[(ZnCl)₂(μ-BBH)]||H₂O₂} solar rechargeable galvanic cell has been constructed.