Proliferation behavior of E. coli in a three-dimensional in vitro tumor model

Doppler imaging detects bacterial infection of living tissue

Living 3D in vitro tissue cultures, grown from immortalized cell lines, act as living sentinels as pathogenic bacteria invade the tissue. The infection is reported through changes in the intracellular dynamics of the sentinel cells caused by the disruption of normal cellular function by the infecting bacteria. Here, the Doppler imaging of infected sentinels shows the dynamic characteristics of infections. Invasive Salmonella enterica serovar Enteritidis and Listeria monocytogenes penetrate through multicellular tumor spheroids, while non-invasive strains of Escherichia coli and Listeria innocua remain isolated outside the cells, generating different Doppler signatures. Phase distributions caused by intracellular transport display Lévy statistics, introducing a Lévy-alpha spectroscopy of bacterial invasion. Antibiotic treatment of infected spheroids, monitored through time-dependent Doppler shifts, can distinguish drug-resistant relative to non-resistant strains. This use of intracellular Doppler spectroscopy of living tissue sentinels opens a new class of microbial assay with potential importance for studying the emergence of antibiotic resistance.

Honggu Choi et al. use biodynamic Doppler imaging to monitor bacterial infection of 3D living tissue and describe changes in the intracellular motions of living host tissue induced by early-stage infection. This work demonstrates the potential for the clinical use of this method to test for antibiotic-resistant infections.

What can microfluidics do for human microbiome research?

Dysregulation of the human microbiome has been linked to various disease states, which has galvanized the efforts to modulate human health through microbiomes. Currently, human microbiome research is going through several phases to identify the constituent components of the microbiome, associate microbiome changes with physiological and pathological states, understand causative relationships, and finally translate this knowledge into therapeutics and diagnostics. The convergence of microfluidic technologies with molecular and cell profiling, microbiology, and tissue engineering can potentially be applied to these different phases of microbiome research to overcome the existing challenges faced by conventional approaches. The goal of this paper is to discuss and highlight the opportunities of applying different microfluidic technologies to specific areas of microbiome research as well as unique challenges that microfluidics must overcome when working with microbiome-relevant biological materials, e.g., micro-organisms, host tissues, and fluids. We will discuss the applicability of integrated microfluidic systems for processing biological samples for genomic sequencing analyses. For functional analysis of the microbiota, we will cover state-of-the-art microfluidic devices for microbiota cultivation and functional measurements. Finally, we highlight the use of organs-on-chips to model various microbiome-host tissue interactions. We envision that microfluidic technologies may hold great promise in advancing the knowledge on the interplay between microbiome and human health, as well as its eventual translation into microbiome-based diagnostics and therapeutics.

Microfluidic Device to Quantify the Behavior of Therapeutic Bacteria in Three-Dimensional Tumor Tissue

Microfluidic devices enable precise quantification of the interactions between anti-cancer bacteria and tumor tissue. Direct observation of bacterial movement and gene expression in tissue is difficult with either monolayers of cells or tumor-bearing mice. Quantification of these interactions is necessary to understand the inherent mechanisms of bacterial targeting and to develop modified organisms with enhanced therapeutic properties. Here we describe the procedures for designing, printing, and assembling microfluidic tumor-on-a-chip devices. We also describe the procedures for inserting three-dimensional tumor-cell masses, exposure to bacteria, and analyzing the resultant images.

Three-dimensional tumor spheroids for in vitro analysis of bacteria as gene delivery vectors in tumor therapy

Background

Several studies in animal models demonstrated that obligate and facultative anaerobic bacteria of the genera Bifidobacterium, Salmonella, or Clostridium specifically colonize solid tumors. Consequently, these and other bacteria are discussed as live vectors to deliver therapeutic genes to inhibit tumor growth. Therapeutic approaches for cancer treatment using anaerobic bacteria have been investigated in different mouse models. In the present study, solid three-dimensional (3D) multicellular tumor spheroids (MCTS) of the colorectal adenocarcinoma cell line HT-29 were generated and tested for their potential to study prodrug-converting enzyme therapies using bacterial vectors in vitro.

Results

HT-29 MCTS resembled solid tumors displaying all relevant features with an outer zone of proliferating cells and hypoxic and apoptotic regions in the core. Upon incubation with HT-29 MCTS, Bifidobacterium bifidum S17 and Salmonella typhimurium YB1 selectively localized, survived and replicated in hypoxic areas inside MCTS. Furthermore, spores of the obligate anaerobe Clostridium sporogenes germinated in these hypoxic areas. To further evaluate the potential of MCTS to investigate therapeutic approaches using bacteria as gene delivery vectors, recombinant bifidobacteria expressing prodrug-converting enzymes were used. Expression of a secreted cytosine deaminase in combination with 5-fluorocytosine had no effect on growth of MCTS due to an intrinsic resistance of HT-29 cells to 5-fluorouracil, i.e. the converted drug. However, a combination of the prodrug CB1954 and a strain expressing a secreted chromate reductase effectively inhibited MCTS growth.

Conclusions

Collectively, the presented results indicate that MCTS are a suitable and reliable model to investigate live bacteria as gene delivery vectors for cancer therapy in vitro.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-015-0383-5) contains supplementary material, which is available to authorized users.

Micro 3D cell culture systems for cellular behavior studies: Culture matrices, devices, substrates, and in-situ sensing methods

Microfabricated systems equipped with 3D cell culture devices and in-situ cellular biosensing tools can be a powerful bionanotechnology platform to investigate a variety of biomedical applications. Various construction substrates such as plastics, glass, and paper are used for microstructures. When selecting a construction substrate, a key consideration is a porous microenvironment that allows for spheroid growth and mimics the extracellular matrix (ECM) of cell aggregates. Various bio-functionalized hydrogels are ideal candidates that mimic the natural ECM for 3D cell culture. When selecting an optimal and appropriate microfabrication method, both the intended use of the system and the characteristics and restrictions of the target cells should be carefully considered. For highly sensitive and near-cell surface detection of excreted cellular compounds, SERS-based microsystems capable of dual modal imaging have the potential to be powerful tools; however, the development of optical reporters and nanoprobes remains a key challenge. We expect that the microsystems capable of both 3D cell culture and cellular response monitoring would serve as excellent tools to provide fundamental cellular behavior information for various biomedical applications such as metastasis, wound healing, high throughput screening, tissue engineering, regenerative medicine, and drug discovery and development.

Patterning bacterial communities on epithelial cells

Micropatterning of bacteria using aqueous two phase system (ATPS) enables the localized culture and formation of physically separated bacterial communities on human epithelial cell sheets. This method was used to compare the effects of Escherichia coli strain MG1655 and an isogenic invasive counterpart that expresses the invasin (inv) gene from Yersinia pseudotuberculosis on the underlying epithelial cell layer. Large portions of the cell layer beneath the invasive strain were killed or detached while the non-invasive E. coli had no apparent effect on the epithelial cell layer over a 24 h observation period. In addition, simultaneous testing of the localized effects of three different bacterial species; E. coli MG1655, Shigella boydii KACC 10792 and Pseudomonas sp DSM 50906 on an epithelial cell layer is also demonstrated. The paper further shows the ability to use a bacterial predator, Bdellovibriobacteriovorus HD 100, to selectively remove the E. coli, S. boydii and P. sp communities from this bacteria-patterned epithelial cell layer. Importantly, predation and removal of the P. Sp was critical for maintaining viability of the underlying epithelial cells. Although this paper focuses on a few specific cell types, the technique should be broadly applicable to understand a variety of bacteria-epithelial cell interactions.

Microfluidic 3D cell culture: potential application for tissue-based bioassays

Current fundamental investigations of human biology and the development of therapeutic drugs commonly rely on 2D monolayer cell culture systems. However, 2D cell culture systems do not accurately recapitulate the structure, function or physiology of living tissues, nor the highly complex and dynamic 3D environments in vivo. Microfluidic technology can provide microscale complex structures and well-controlled parameters to mimic the in vivo environment of cells. The combination of microfluidic technology with 3D cell culture offers great potential for in vivo-like tissue-based applications, such as the emerging organ-on-a-chip system. This article will review recent advances in the microfluidic technology for 3D cell culture and their biological applications.

Aqueous two-phase system-derived biofilms for bacterial interaction studies

We describe patterning of bacterial biofilms using polymer-based aqueous two-phase system (ATPS) microprinting protocols. The fully aqueous but selectively bacteria-partitioning nature of the ATPS allows spatially distinct localization of suspensions of bacteria such as Pseudomonas aeruginosa and Escherichia coli with high precision. The ATPS patterned bacterial suspensions form spatially distinct biofilms over time. Due to the fully aqueous and gentle noncontact printing procedures employed, coculture biofilms composed of multiple types of bacteria could be printed not only adjacent to each other but also directly over another layer of existing biofilm. In addition, the ATPS environment also allows free diffusion of small molecules between spatially distinct and localized bacterial suspensions and biofilms. This enables biofilms to chemically affect or be affected by neighboring biofilms or planktonic cells, even if they consist of different strains or species. We show that a β-lactamase producing biofilm confers ampicillin resistance to neighboring nonresistant planktonic cells, as seen by a 3,600-fold increase in survival of the ampicillin-sensitive strain. These examples demonstrate the ability of ATPS-based biofilm patterning methods to enable unique studies on commensalistic effects between bacterial species.

A microfluidic system for investigation of extravascular transport and cellular uptake of drugs in tumors

Three-dimensional (3D) tumor models have been established in various microfluidic systems for drug delivery and resistance studies in vitro. However, one of the main drawbacks of these models is non-uniform distribution of cells, leaving regions with very low cell density within the 3D structures. As a result, molecular diffusion in the cell compartments is faster than that observed in solid tumors. To solve this problem, we developed a new technique for preparation of 3D tumor models in vitro. It was based on a microfluidic device containing three parallel channels separated by narrowly spaced posts. Tumor cells were loaded into the central channel at high density. To test the system, B16.F10 melanoma cells were perfusion-cultured overnight and the resulting 3D structure was characterized in terms of viability, density, and morphology of cells as well as transport properties of small fluorescent molecules. Immediately upon loading of tumor cells, the cell density was comparable to those observed in B16.F10 tumor tissues in vivo; and the viability of tumor cells was maintained through the overnight culture. The tumor model displayed low extracellular space and high resistance to diffusion of small molecules. For membrane-permeant molecules (e.g., Hoechst 33342), the rate of interstitial penetration was extremely slow, compared to membrane-impermeant molecules (e.g., sodium fluorescein). This versatile tumor model could be applied to in vitro studies of transport and cellular uptake of drugs and genes.