Fast response microfiber-optic pH sensor based on a polyaniline sensing layer

The microfiber-optic interferential sensor based on polyaniline (PANI) sensing layer is efficiently performed in pH detection. The refractive index changes of PANI film can be translated into a significant wavelength shift in the interferometric fringe. We demonstrate the feasibility of PANI attached to the fiber surface in studying the interface polymerization method. The sensing performances of an improved sensitivity in acid solution with -0.54nm/pH and alkaline solution with 0.28 nm/pH are systematically investigated. By taking advantage of its miniature size and mechanical flexibility, the microfiber interferential sensor might make a promising platform for pH measurement.

Layer-by-Layer Nano-assembly: A Powerful Tool for Optical Fiber Sensing Applications

The ability to tune the composition of nanostructured thin films is a hot topic for the design of functional coatings with advanced properties for sensing applications. The control of the structure at the nanoscale level enables an improvement of intrinsic properties (optical, chemical or physical) in comparison with the traditional bulk materials. In this sense, among all the known nanofabrication techniques, the layer-by-layer (LbL) nano-assembly method is a flexible, easily-scalable and versatile approach which makes possible precise control of the coating thickness, composition and structure. The development of sensitive nanocoatings has shown an exceptional growth in optical fiber sensing applications due to their self-assembling ability with oppositely charged components in order to obtain a multilayer structure. This nanoassembly technique is a powerful tool for the incorporation of a wide variety of species (polyelectrolytes, metal/metal oxide nanoparticles, hybrid particles, luminescent materials, dyes or biomolecules) in the resultant multilayer structure for the design of high-performance optical fiber sensors. In this work we present a review of applications related to optical fiber sensors based on advanced LbL coatings in two related research areas of great interest for the scientific community, namely chemical sensing (pH, gases and volatile organic compounds detection) as well as biological/biochemical sensing (proteins, immunoglobulins, antibodies or DNA detection).

Self-assembly on optical fibers: a powerful nanofabrication tool for next generation "lab-on-fiber" optrodes

Self-assembly offers a unique resource for the preparation of discrete structures at the nano- and microscale, which are either not accessible by other fabrication techniques or require highly expensive and technologically demanding processes. The possibility of obtaining spontaneous organization of separated components, whether they are molecules, polymers, nano- or micro-objects, into a larger functional unit, enables the development of ready-to-use plug and play devices and components at lower costs. Expanding the applicability of self-assembly approaches at the nanoscale to non-conventional substrates would open up new avenues towards multifunctional platforms customized for specific applications. Recently, the combination of the amazing morphological and optical features of self-assembled patterns with the intrinsic properties of optical fibers to conduct light to a remote location has demonstrated the potentiality to open up new intriguing scenarios featuring unprecedented functionalities and performances. The integration of advanced materials and structures at the nanoscale with optical fiber substrates is the idea behind the so-called lab-on-fiber technology, which is an emerging technology at the forefront of nanophotonics and nanotechnology research. Self-assembly processes can have a key role in implementing cost-effective solutions suitable for the mass production of technologically advanced platforms based on optical fibers towards their real market exploitation. Novel lab-on-fiber optrodes would arise from the sustainable integration of functional materials at the nano- and microscale onto optical fiber substrates. Such devices are able to be easily integrated in hypodermic needles and catheters for in vivo theranostics and point-of-care diagnostics, opening up new frontiers in multidisciplinary technological development to be exploited in life science applications. This work is conceived to provide an overview of the latest strategies, based on self-assembly processes, which have been implemented for the realization of lab-on-fiber optrodes with particular emphasis on the perspectives and challenges that lie ahead. We discuss the main fabrication techniques and strategies aimed at developing new multifunctional optical fiber nanoprobes and their application in real scenarios. Finally, we highlight some of the other self-assembly processes that have not yet been applied to optical fiber sensors, but have the potentiality to be exploited in the fabrication of future lab-on-fiber devices.

Porous Polyelectrolytes: The Interplay of Charge and Pores for New Functionalities

The past decade has witnessed rapid advances in porous polyelectrolytes and there is tremendous interest in their synthesis as well as their applications in environmental, energy, biomedicine, and catalysis technologies. Research on porous polyelectrolytes is motivated by the flexible choice of functional organic groups and processing technologies as well as the synergy of the charge and pores spanning length scales from individual polyelectrolyte backbones to their nano-/micro-superstructures. This Review surveys recent progress in porous polyelectrolytes including membranes, particles, scaffolds, and high surface area powders/resins as well as their derivatives. The focus is the interplay between surface chemistry, Columbic interaction, and pore confinement that defines new chemistry and physics in such materials for applications in energy conversion, molecular separation, water purification, sensing/actuation, catalysis, tissue engineering, and nanomedicine.

All-polymer fiber-optic pH sensor

A novel all-polymer fiber-optic pH sensor using a UV-cured pH-sensitive hydrogel, poly(ethylene glycol) diacrylate (PEGDA), coated on a polymer fiber Bragg grating was developed. The PEGDA increased in volume according to the pH value of the surrounding fluid, which subsequently induced a lateral stress in the polymer fiber Bragg grating. The proposed pH sensor exhibits a pH sensitivity of up to -0.41 nm/pH and a fast response time of 30 s.

An in-line Mach-Zehnder Interferometer Using Thin-core Fiber for Ammonia Gas Sensing With High Sensitivity

Ammonia is an important indicator among environmental monitoring parameters. In this work, thin-core fiber Mach-Zehnder interferometer deposited with poly (acrylic acid) (PAA), poly (allyamine hydrochloride) (PAH) and single-walled carbon nanotubes (SWCNTs-COOH) sensing film for the detection of ammonia gas has been presented. The thin-core fiber modal interferometer was made by fusion splicing a small section of thin-core fiber (TCF) between two standard single mode fibers (SMF). A beam propagation method (BPM) is employed for the design of proposed interferometer and numerical simulation. Based on the simulation results, interferometer with a length of 2 cm of thin-core fiber is fabricated and experimentally studied. (PAH/PAA)₂ + [PAH/(PAA + SWCNTs-COOH)]₈ film is deposited on the outer surface of thin-core fiber via layer-by-layer (LbL) self-assembly technique. The gas sensor coated with (PAH/PAA)₂ + [PAH/(PAA + SWCNTs-COOH)]₈ film towards NH₃ gas exposure at concentrations range from 1 to 960 ppm are analyzed and the sensing capability is demonstrated by optical spectrum analyzer (OSA). Experimental results show that the characteristic wavelength shift has an approximately linear relationship in the range 1–20 ppm, which is in accordance with the numerical simulation. Thus, this paper reveals the potential application of this sensor in monitoring low concentration NH₃ gas.

Near-Infrared Light-Stimulus-Responsive Film as a Sacrificial Layer for the Preparation of Free-Standing Films

It remains a challenge to fabricate sacrificial films that are stable in most of solvents and can be readily decomposed on demand. Here we report the fabrication of a near-infrared (NIR) light decomposable sacrificial film by layer-by-layer (LbL) assembly of UV-light-decomposable poly((4-(2-bromoethoxy)-5-methoxy-2-nitrobenzyl acrylate) triethylammonium bromide) (PNBA-TEA), poly(sodium 4-styrene-sulfonate) (PSS), branched polyethyleimine (bPEI), and lanthanide-doped upconversion nanoparticles (UCNPs). The [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films are stable in deposition solutions of various materials and decompose upon NIR light irradiation. In the [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films, UCNPs can convert NIR light into UV light, which can decompose PNBA-TEA. After immersing the NIR light-irradiated [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films in 0.1 M aqueous NaHCO3 solution, the disintegration of the entire films occurs because of the repulsive force between the negatively charged photoproduct of PNBA-TEA and PSS. LbL-assembled (PAH/PAA)*50 films deposited on top of the NIR-light-decomposable [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films can be conveniently released to produce large-area and defect-free (PAH/PAA)*50 free-standing films after NIR light irradiation and subsequent immersion in 0.1 M aqueous NaHCO3 solution. Because of the satisfactory stability and on-demand decomposable property, the [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films are promising as sacrificial layers for the fabrication of various free-standing films.

Rapid 3D Patterning of Poly(acrylic acid) Ionic Hydrogel for Miniature pH Sensors

Poly(acrylic acid) (PAA), as a highly ionic conductive hydrogel, can reversibly swell/deswell according to the surrounding pH conditions. An optical maskless -stereolithography technology is presented to rapidly 3D pattern PAA for device fabrication. A highly sensitive miniature pH sensor is demonstrated by in situ printing of periodic PAA micropads on a tapered optical microfiber.

Tunable disintegration of layer-by-layer assembly multilayer films based on hydrolytical-polybetaine at wide-range time

A cationic hydrolytical-polycarboxybetaine (HPCB), poly(N-ethyl acetate-4-vinylpyridinium bromide) was synthesized by incorporating ester group into the side chain of polycarboxybetaine (PCB). The hydrolytic behaviors of HPCB samples in pH 7.4 phosphate buffer saline (PBS) were investigated by FT-IR and (1)H NMR. The layer-by-layer (LbL) assembly of HPCB/poly (sodium 4-styrenesulfonate) PSS and the disintegration of HPCB/PSS multilayer films were monitored by UV-vis absorption spectroscopy, quartz crystal microbalance (QCM) and atomic force microscopy (AFM). The disintegrated behavior of multilayer films was studied in detail by changing the cationic degree of HPCB and the pH of the immersion solution (PBS) in the disintegration process. The disintegration time of HPCB/PSS multilayer films could be controlled widely from 2 min to 30 days in PBS.