Strategies to Enhance the Electrochromic Properties of Conjugated Polymers Bearing Pyromellitic Diimide Acceptors

A series of conjugated polymers bearing thiophene-based donors and pyromellitic diimide (PMDI) acceptor were prepared, and their electrochromic (EC) properties were studied via using fabricated thin-film EC devices. It was observed that structurally regular alternating polymers with fewer (1 and 2) thiophene donors do not exhibit any EC properties while increasing the number of donors eventually led to the emergence of orange-red-to-green colour switching. On this basis, two more random co-polymers containing higher donor-to-acceptor ratios were synthesized to further improve EC switching properties. The two polymers, which bear a PMDI-to-thiophene ratio of ca. 1 : 7 and 1 : 8, revealed orange red-to-blue colour switching and generally improved optical contrasts and switching speeds in both the visible and near infra-red (NIR) region. In addition, the subtle modulation of polymer colour and hue via variation of the number of thiophene donors was evident through colorimetric study. This work therefore demonstrates the potential and possibility of using the PMDI acceptor unit to construct EC-active conjugated polymers, and considerations for future tuning of colour and switching performances.

A-D-A Molecule-Bridge Interface for Efficient Perovskite Solar Cells and Modules

As the photovoltaic field endeavors to transition perovskite solar cells (PSCs) to industrial applications, inverted PSCs, which incorporate fullerene as electron transport layers, have emerged as a compelling choice due to their augmented stability and cost-effectiveness. However, these attributes suffer from performance issues stemming from suboptimal electrical characteristics at the perovskite/fullerene interface. To surmount these hurdles, an interface bridging strategy (IBS) is proposed to attenuate the interface energy loss and enhance the interfacial stability by designing a series of A-D-A type perylene monoimide (PMI) derivatives with multifaceted advantages. In addition to passivating defects, the IBS plays a crucial role in facilitating the binding between perovskite and fullerene, thereby enhancing interface coupling and importantly, improving the formation of fullerene films. The PMI derivatives, functioning as bridges, serve as a protective barrier to enhance the device stability. Consequently, the IBS enables a remarkable efficiency of 24.62% for lab-scale PSCs and an efficiency of 18.73% for perovskite solar modules craft on 156 × 156 mm2 substrates. The obtained efficiencies represent some of the highest recorded for fullerene-based devices, showcasing significant progress in designing interfacial molecules at the perovskite/fullerene interface and offering a promising path to enhance the commercial viability of PSCs.

Electrosynthesis and Electrochromism of a New Crosslinked Polydithienylpyrrole with Diphenylpyrenylamine Subunits

A new electroactive monomer with two 2,5-di(2-thienyl)pyrrole (SNS) units and one diphenylpyrenylamine (DPPA) subunit, namely N,N-bis(4-(2,5-di(2-thienyl)-1H-pyrrol-1-yl)-phenyl)-1-aminopyrene (DPPA-2SNS), was synthesized from 1,4-di-(2-thienyl)butane-1,4-dione with N,N-di(4-aminophenyl)-1-aminopyrene through the Paal–Knorr condensation reaction. Visible and near-infrared (NIR) electrochromic polymer films could be facilely generated on the ITO-glass surface by the electrochemical polymerization of DPPA-2SNS in an electrolyte solution. The electro-synthesized polymer films exhibit multi-staged redox processes and multi-colored anodic electrochromic behavior. A multi-colored electrochromism, with yellowish orange, greyish blue, and purplish black colors, was observed in the polymer film by applying a positive potential. The polymer films exhibit reasonable coloration efficiency, fast response time, and good cycling stability, especially when switched between neutral and the first oxidation states. For comparison, N-(1-pyrenyl)-2,5-di(2-thienyl)pyrrole (Py-SNS) was also prepared and characterized with electrochemical and electro-optical properties.

Novel polyimides containing flexible carbazole blocks with electrochromic and electrofluorescencechromic properties

A series of polyimides (PIs) were prepared by polycondensation of a diamine monomer with five anhydrides (1,2,4,5-benzenetetracarboxylic anhydride (BTA), 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTD), 3,3',4,4'-biphenyltetracarboxylic dianhydride (BTD), 4-[(1,3-dihydro-1,3-dioxo-5-isobenzofuranyl)oxy]-1,3-isobenzofurandione (DDII), and 3,3',4,4'-benzophenonetetracarboxylic dianhydride (BPTD)), which have anodic electrochromic (EC) properties. These PIs not only show good solubility and thermal stability, but also demonstrate stable electrochemical oxidation behavior and good EC properties, and the highest retained electroactivity reaches 99% after 600 cycles. In addition, the series of PIs exhibit excellent electrofluorescencechromic (EFC) properties. Therefore, the novel materials will contribute to the application of EC or EFC displays in the future.

A comparative study of redox-active, ambipolar electrochromic triphenylamine-based polyimides prepared by electrochemical polymerization and conventional polycondensation methods

The spectroscopic, electrochemical and electrochromic properties of polyimides with tetraphenylbenzidine (TPB) units prepared by electropolymerization and polycondensation were compared.

Electrosynthesis of Aromatic Poly(amide-amine) Films from Triphenylamine-Based Electroactive Compounds for Electrochromic Applications

Two electropolymerizable monomers with a methoxytriphenylamine core linked via amide groups to two triphenylamine (TPA) or N-phenylcarbazole (NPC) terminal groups, namely 4,4'-bis(4-diphenylaminobenzamido)-4''-methoxytriphenylamine (MeOTPA-(TPA)₂) and 4,4'-bis(4-(carbazol-9-yl)benzamido)-4''-methoxytriphenylamine (MeOTPA-(NPC)₂), were synthesized and characterized by FTIR and ¹H NMR spectroscopy, mass spectrometry, and cyclic voltammetry. The electrochemical polymerization reactions of these MeOTPA-cored monomers over indium tin oxide (ITO) electrode allow the generation of electroactive poly(amide-amine) films. The electro-generated polymer films exhibited reversible redox processes and multi-colored electrochromic behaviors upon electro-oxidation, together with moderate coloration efficiency and cycling stability. The optical density changes (ΔOD) were observed in the range of 0.18⁻0.68 at specific absorption maxima, with the calculated coloration efficiencies of 42⁻123 cm²/C. Single-layer electrochromic devices using the electrodeposited polymer films as active layers were fabricated for the preliminary investigation of their electrochromic applications.

Synthesis and Electrochromism of Highly Organosoluble Polyamides and Polyimides with Bulky Trityl-Substituted Triphenylamine Units

Two series of polyamides and polyimides containing bulky trityl-substituted triphenylamine units were synthesized from condensation reactions of 4,4′-diamino-4′′-trityltriphenylamine with various dicarboxylic acids and tetracarboxylic dianhydrides, respectively. The polymers showed good solubility and film-forming ability. Flexible or robust films could be readily obtained via solution-casting. The use of aliphatic diacid or dianhydride reduces interchain charge transfer complexing and leads to colorless polyamide and polyimide films. These polymers showed glass-transition temperatures in the range of 206–336 °C. Cyclic voltammograms of the polyamide and polyimide films displayed reversible electrochemical oxidation processes in the range of 0–1.0 or 0–1.3 V. Upon oxidation, the color of polymer films changes from colorless to blue-green or blue. As compared to the polyimide counterparts, the polyamides showed lower oxidation potentials and thus a higher electrochromic stability and coloration efficiency. Simple electrochromic devices were also fabricated as a preliminary investigation for electrochromic applications of the prepared polymers.

Synthesis and properties of electroactive aromatic polyimides with methyl- or trifluoromethyl-protecting triphenylamine units

Two series of new redox-active aromatic polyimides with methyl- (–CH3) or trifluoromethyl (–CF3)-protecting triphenylamine moieties were prepared from 4,4′-diamino-4″-methyltriphenylamine and 4,4′-diamino-4″-(trifluoromethyl)triphenylamine with aromatic tetracarboxylic dianhydrides via the conventional two-step polycondensation technique. Flexible and strong polyimide films could be obtained via the thermal curing of their precursor poly(amic acid) films or direct solution cast from some organosoluble polyimides. The polyimides showed high glass-transition temperatures between 269°C and 312°C, and they did not show significant decomposition before 500°C in air or under nitrogen atmosphere. Cyclic voltammograms of the polyimide films on the indium–tin oxide-coated glass substrate exhibited a pair of reversible redox waves with half-wave oxidation potentials of 1.08–1.10 V (for the –CH3 series) and 1.23–1.26 V (vs. silver/silver chloride; for the –CF3 series) in acetonitrile solution. The polyimide films showed anodic electrochromism from pale yellow neutral state to purplish blue (for the –CH3 series) and chrome yellow (for the –CF3 series) when oxidized.

Synthesis and electrochemical properties of new redox-active polyimides with (1-piperidinyl)triphenylamine moieties

A series of new electroactive aromatic polyimides with (1-piperidinyl)triphenylamine moieties were prepared from 4,4′-diamino-4″-(1-piperidinyl)triphenylamine and aromatic tetracarboxylic dianhydrides via the conventional two-step polycondensation technique. Flexible and strong polyimide films could be obtained via the thermal curing of their precursor poly(amic acid) films. The polyimides showed high glass transition temperatures between 288°C and 318°C, and they did not show significant decomposition before 500°C in air or nitrogen atmosphere. Cyclic voltammograms of the polyimide films on the indium–tin oxide-coated glass substrate exhibited a pair of reversible oxidation waves with low onset oxidation potentials of 0.45–0.49 V (vs. silver/silver chloride) in acetonitrile solution. Upon oxidation, the color of the polyimide films changes from pale yellow to yellowish green and finally to blue.

Black-to-transmissive electrochromic switching polymer films via solution co-processing

Two newly synthesized electrochromic polymers were utilized to prepare black films, which exhibited moderate optical contrast and robust stability.

Design of triphenylamine appended anthracene derivatives: electro-polymerization and their electro-chromic behaviour

Three derivatives of anthracene as a core interior with terminal one or two triphenylamine sides have been designed and developed to achieve a smart metal free electrochromic materials.

Electrochemical synthesis of electrochromic polycarbazole films from N-phenyl-3,6-bis(N-carbazolyl)carbazoles

Electroactive and electrochromic polycarbazole films were directly prepared on electrodes from N-phenyl-3,6-bis(N-carbazolyl)carbazoles by carbazole-based electrochemical oxidative coupling.

Organo Modified Multi-Walled Carbon Nanotube Reinforced Pyridine Core Polybenzoxazine (MWCNT/PBZ) Nanocomposites

A new series of multi-walled carbon nanotube reinforced polybenzoxazine (MWCNT/PBZ) nanocomposites was successfully designed and developed. Three different maleimido terminal benzoxazine monomers (MI-BZs) were synthesized using N-(4-hydroxyphenyl) maleimide (HPM) and formaldehyde solution through Mannich condensation reaction and were characterized by FT-IR and NMR spectroscopy. Varying weight percentages (0 wt.%, 0.5 wt.%, 1.0 wt.% and 1.5 wt.%) of glycidyl-MWCNT were then incorporated into benzoxazine matrices to prepare MWCNT/PBZ nanocomposites. The nanocomposites having higher weight percentage of MWCNT were found to possess excellent thermal properties than those of neat PBZs. The developed nanocomposites exhibited better flame retardancy and higher dielectric constant. The optical properties ascertained from the UV-Vis absorption bands at the region of 300–350 nm and strong fluorescent emissions were observed in the wavelength range of 300–550 nm from Photoluminescence analysis. The intensity of characteristic diffraction peaks corresponding to g-MWCNT confirmed the reinforcement of MWCNT in the benzoxazine matrices, which indicated the successful formation of nanocomposites. The morphological studies ascertain the compatibility and uniform dispersion of MWCNT in the PBZ network.

Synthesis and characterization of novel electrochromic poly(amide-imide)s with N,N′-di(4-methoxyphenyl)-N,N′-diphenyl-p-phenylenediamine units

Novel redox-stable and multi-colored electrochromic poly(amide-imide)s with N,N′-di(4-methoxyphenyl)-N,N′-diphenyl-p-phenylenediamine units were synthesized and characterized.

Electrosynthesis and electrochromic properties of poly(amide-triarylamine)s containing triptycene units

Redox-active and electrochromic films of poly(amide-triarylamine)s with triptycene units have been directly fabricated on the electrode surface via the electrochemical oxidative coupling of triphenylamine or carbazole units.

(Photo)physical Properties of New Molecular Glasses End-Capped with Thiophene Rings Composed of Diimide and Imine Units

New symmetrical arylene bisimide derivatives formed by using electron-donating-electron-accepting systems were synthesized. They consist of a phthalic diimide or naphthalenediimide core and imine linkages and are end-capped with thiophene, bithiophene, and (ethylenedioxy)thiophene units. Moreover, polymers were obtained from a new diamine, N,N'-bis(5-aminonaphthalenyl)naphthalene-1,4,5,8-dicarboximide and 2,5-thiophenedicarboxaldehyde or 2,2'-bithiophene-5,5'-dicarboxaldehyde. The prepared azomethine diimides exhibited glass-forming properties. The obtained compounds emitted blue light with the emission maximum at 470 nm. The value of the absorption coefficient was determined as a function of the photon energy using spectroscopic ellipsometry. All compounds are electrochemically active and undergo reversible electrochemical reduction and irreversible oxidation processes as was found in cyclic voltammetry and differential pulse voltammetry (DPV) studies. They exhibited a low electrochemically (DPV) calculated energy band gap (E_g) from 1.14 to 1.70 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels and E_g were additionally calculated theoretically by density functional theory at the B3LYP/6-31G(d,p) level. The photovoltaic properties of two model compounds as the active layer in organic solar cells in the configuration indium tin oxide/poly(3,4-(ethylenedioxy)thiophene):poly(styrenesulfonate)/active layer/Al under an illumination of 1.3 mW/cm² were studied. The device comprising poly(3-hexylthiophene) with the compound end-capped with bithiophene rings showed the highest value of V_oc (above 1 V). The conversion efficiency of the fabricated solar cell was in the range of 0.69-0.90%.

Facile preparation of electrochromic poly(amine–imide) films from diimide compounds with terminal triphenylamino groups via electrochemical oxidative coupling reactions

Electroactive and electrochromic poly(amine–imide) films could be directly prepared on electrodes from diimide compounds TPA6F-DI and TPASO2-DI with triphenylamino end groups by electrochemical oxidative coupling.