Development of an electrospun polycaprolactone/silk scaffold for potential vascular tissue engineering applications

Long-distance (⩾10 mm) arterial vascular defect injury was a massive challenge affecting human health. Compared with autologous transplantation, tissue-engineered scaffolds such as biocompatible silk fibroin (SF) scaffolds have been developed because they exhibit equivalent functional repair effects without adverse reactions. However, its mechanical strength and structural stability needed to be further improved to match the longer repair cycle of blood vessels while maintaining the original biological safety. Hence, we designed and prepared SF and hydrophobic polycaprolactone (PCL) composite microfibers by an improving electrospinning method. It was found that when the weight ratio of PCL to SF was 1: 1, a microfiber scaffold with high strength (6.16 N) and minimum degradability can be obtained. More importantly, compared with natural silk fibroin, the novel composite microfiber scaffolds can slightly inhibit cell infiltration and inflammation through co-culture with HUVECs in vitro and rabbit back transplantation in vivo. Furthermore, the fabricated scaffolds also demonstrated excellent structural stability in vivo because of the well-organized PCL doping in the structure. All these results indicated that the novel PCL/SF composite microfiber scaffolds were promising candidates for vascular tissue engineering applications.

Layer-by-layer assembly of versatile nanoarchitectures with diverse dimensionality: a new perspective for rational construction of multilayer assemblies

Over the past few decades, layer-by-layer (LbL) assembly of multilayer thin films has garnered considerable interest on account of its ability to modulate nanometer control over film thickness and its extensive choice of usable materials for coating planar and particulate substrates, thus allowing for the fabrication of responsive and functional thin films for their potential applications in a myriad of fields. Herein, we provide elaborate information on the current developments of LbL assembly techniques including different properties, molecular interactions, and assembly methods associated with this promising bottom-up strategy. In particular, we highlight the principle for rational design and fabrication of a large variety of multilayer thin film systems including multi-dimensional capsules or spatially hierarchical nanostructures based on the LbL assembly technique. Moreover, we discuss how to judiciously choose the building block pairs when exerting the LbL assembly buildup which enables the engineering of multilayer thin films with tailor-made physicochemical properties. Furthermore, versatile applications of the diverse LbL-assembled nanomaterials are itemized and elucidated in light of specific technological fields. Finally, we provide a brief perspective and potential future challenges of the LbL assembly technology. It is anticipated that our current review could provide a wealth of guided information on the LbL assembly technique and furnish firm grounds for rational design of LbL assembled multilayer assemblies toward tangible applications.

Using a layer-by-layer assembly method to fabricate a uniform and conductive nitrogen-doped graphene anode for indium-tin oxide-free organic light-emitting diodes

Highly conductive, uniform, and transparent nitrogen-doped graphene multilayer films were produced by a layer-by-layer (LbL) assembly method. Such a technique was realized by alternate deposition of graphene oxide modified with the cationic surfactant N,N,N-trimethyl-1-dodecanaminium bromide (CTAB) and the anionic surfactant sodium dodecylbenzenesulfonate. In this way, we can achieve a highly conductive (900 S/cm), uniform, and controllable graphene film in terms of thickness, transmittance, and sheet resistance after high-temperature reduction. The improved conductivity is attributed to better graphitization and nitrogen-doping introduced by CTAB. The organic light-emitting diode using such a multilayer graphene film fabricated by the LbL method as an anode obtains higher current density and luminance at low voltage compared to that with an indium-tin oxide (ITO) anode. Moreover, the current efficiency of graphene-based device is comparable to that of an ITO-based device. It is proved that such a nitrogen-doped multilayer graphene film developed by the LbL assembly technique is a promising candidate for a transparent electrode in organic electronics.

Peculiar reduction of graphene oxide into graphene after diffusion in exponentially growing polyelectrolyte multilayers

In the present work, in situ reduction of graphene oxide (GO) into graphene was preformed, after diffusion in exponentially growing polyelectrolyte multilayers, using sodium citrate as the reducing agent. First, the graphene oxide was obtained by treating a commercial grade of Expanded Graphite (EG). Based on XRD and Raman spectroscopy results, a complete exfoliation of graphene nanopellets down to one layer was achieved during the oxidation process. Secondly, the diffusion of GO was carried out in an exponentially growing polyelectrolyte multilayer film made from poly(diallyldimethylammonium chloride) as the polycation and from poly(acrylic acid) as the polyanion. Electrical conductivity of the GO based films was measured during the reduction process as a function of time. The conductivity reached values of the order of 10(-4) S cm(-1), whereas the pristine polyelectrolyte multilayer was highly insulating (∼10(-8) S cm(-1)). The conductivity also reached a maximal value after about 24 h of reduction and decreased for longer reduction duration. Some tentative explanations for this peculiar finding will be given.